Archivio Istituzionale della RicercaSABOORI, ABDOLLAH
SABOORI, ABDOLLAH
Dipartimento di Ingegneria Gestionale e della Produzione
035109
Additive manufacturing of copper with a single mode IR fiber laser
2023 Calignano, Flaviana; Pavese, Matteo; Saboori, Abdollah; Galati, Manuela; Iuliano, Luca
Effect of powder atomising route on the surface quality and mechanical performance of AISI 316L samples produced via laser powder bed fusion process
2023 Lannunziata, Erika; Zapparoli, Niccolò; Iuliano, Luca; Saboori, Abdollah
Improving the surface quality and mechanical properties of additively manufactured AISI 316L stainless steel by different surface post-treatment
2023 Behjat, Amir; Lannunziata, Erika; Gadalińska, Elżbieta; Iuliano, Luca; Saboori, Abdollah
Influence of Process Parameters on Compression Properties of 3D Printed Polyether-Ether-Ketone by Fused Filament Fabrication
2023 Lannunziata, Erika; Giubilini, Alberto; Saboori, Abdollah; Minetola, Paolo
Enhanced surface properties and bioactivity of additively manufactured 316L stainless steel using different post-treatments
2022 Behjat, A.; Shamanian, M.; Taherizadeh, A.; Noori, M.; Lannunziata, E.; Iuliano, L.; Saboori, A.
Laser powder bed fusion of AISI 316L lattice structures for biomedical applications
2022 Lannunziata, Erika; Saboori, Abdollah; Galati, Manuela; Iuliano, Luca
Study on the machinability of Ti6Al4V parts produced by electron beam powder bed fusion
2022 Valenza, Federica; Atzeni, Eleonora; Iuliano, Luca; Saboori, Abdollah; Salmi, Alessandro
Analysis of single tracks of IN718 produced by laser powder directed energy deposition process
2021 Piscopo, Gabriele; Atzeni, Eleonora; Biamino, Sara; Iuliano, Luca; Mazzucato, Federico; Saboori, Abdollah; Salmi, Alessandro; Valente, Anna
Effect of heat treatments on the microstructure of Inconel 939 alloy processed by laser powder bed fusion
2020 Marchese, G.; Parizia, S.; Saboori, A.; Bassini, E.; Manfredi, D.; Lombardi, M.; Ugues, D.; Biamino, S.
From Single Scan Tracks to 3D Samples: Effect of Process Parameters on Quality of Ti-6Al-4V Produced by Means of Direct Energy Deposition
2020 Carrozza, Alessandro; Aversa, Alberta; Mazzucato, Federico; Saboori, Abdollah; Valente, Anna; Lombardi, Mariangela; Fino, Paolo; Biamino, Sara.
On the Effect of Deposition Patterns on the Residual Stress, Roughness and Microstructure of AISI 316L Samples Produced by Directed Energy Deposition
2020 Piscopo, Gabriele; Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca; Busatto, Mattia; Tusacciu, Simona; Lai, Manuel; Biamino, Sara; Toushekhah, Mostafa; Saboori, Abdollah; Fino, Paolo
Ti-6Al-4V lattice structures produced by EBM: Heat treatment and mechanical properties
2020 Galati, M.; Saboori, A.; Biamino, S.; Calignano, F.; Lombardi, M.; Marchiandi, G.; Minetola, P.; Fino, P.; Iuliano, L.
Effect of heat treatment on microstructural evolution of additively manufactured Inconel 718 and cast alloy
2019 Saboori, Abdollah; Marchese, Giulio; Aversa, Alberta; Bassini, Emilio; Mazzucato, Federico; Valente, Anna; Lombardi, Mariangela; Ugues, Daniele; Biamino, Sara; Fino, Paolo
Microstructure And Mechanical Performance Of Ti-6Al-4V Cellular Structures Produced By Electron Beam Melting
2019 Saboori, Abdollah; A (Politecnico Di, Torino; Italy), ; Galati, M; Biamino, S; Minetola, P; Calignano, F; Lombardi, M; Iuliano, L; Fino, P
Accelerated Process Parameter Optimization for Directed Energy Deposition of 316L Stainless Steel
2018 Saboori, Abdollah; Bosio, Federico; Librera, Erica; De Chirico, Michele; Lombardi, Mariangela; Fino, Paolo
Advanced Powder Characterization for Laser Powder-Bed Fusion of AlSi10Mg
2018 Carrozza, Alessandro; Saboori, Abdollah; Biamino, Sara; Lombardi, Mariangela; Aversa, Alberta; Marchese, Giulio; Mark, Cooper; Laura, Howlett
An investigation on the effect of Graphene Nanoplatelets on The Compaction behaviour of Pure Copper Powders
2018 Saboori, Abdollah; Pavese, Matteo; Fino, Paolo
Directed Energy Deposition of 316L Steel: Effect of Type of Powders and Gas Related Parameters
2018 Bosio, Federico; Saboori, Abdollah; Andrea, Lacagnina; Erica, Librera; Michele De Chirico, ; Biamino, Sara; Fino, Paolo; Lombardi, Mariangela
Graphene Reinforced Aluminum Matrix Composites Produced by Powder Metallurgy; Microstructure, Thermophysical And Mechanical Properties
2018 Saboori, Abdollah; Pavese, Matteo; Fino, Paolo
The Capacity Of Cold Spray Additive Manufacturing Technology For Metallic Part Repairing
2018 Saboori, Abdollah; Biamino, Sara; Valente, Anna; Gitardi, Diego; Basile, Gloria; Lombardi, Mariangela; Fino, Paolo
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Additive manufacturing of copper with a single mode IR fiber laser / Calignano, Flaviana; Pavese, Matteo; Saboori, Abdollah; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 118:(2023), pp. 649-653. (Intervento presentato al convegno CIRP ICME '22 Conference tenutosi a Virtual Conference nel Luglio 2022) [10.1016/j.procir.2023.06.111]. | 1-gen-2023 | Flaviana, CalignanoMatteo, PaveseAbdollah, SabooriManuela, GalatiLuca, Iuliano | 1-s2.0-S2212827123003384-main.pdf |
| Effect of powder atomising route on the surface quality and mechanical performance of AISI 316L samples produced via laser powder bed fusion process / Lannunziata, Erika; Zapparoli, Niccolò; Iuliano, Luca; Saboori, Abdollah. - ELETTRONICO. - 118:(2023), pp. 688-693. (Intervento presentato al convegno CIRP tenutosi a Ischia) [10.1016/j.procir.2023.06.118]. | 1-gen-2023 | Lannunziata, ErikaIuliano, LucaSaboori, Abdollah + | 1-s2.0-S2212827123003451-main.pdf |
| Improving the surface quality and mechanical properties of additively manufactured AISI 316L stainless steel by different surface post-treatment / Behjat, Amir; Lannunziata, Erika; Gadalińska, Elżbieta; Iuliano, Luca; Saboori, Abdollah. - ELETTRONICO. - 118:(2023), pp. 771-776. (Intervento presentato al convegno CIRP tenutosi a Ischia) [10.1016/j.procir.2023.06.132]. | 1-gen-2023 | Behjat, AmirLannunziata, ErikaIuliano, LucaSaboori, Abdollah + | 1-s2.0-S2212827123003591-main.pdf |
| Influence of Process Parameters on Compression Properties of 3D Printed Polyether-Ether-Ketone by Fused Filament Fabrication / Lannunziata, Erika; Giubilini, Alberto; Saboori, Abdollah; Minetola, Paolo. - ELETTRONICO. - 1:(2023), pp. 336-344. (Intervento presentato al convegno Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems. FAIM 2023 tenutosi a Porto nel Giugno) [10.1007/978-3-031-38241-3_38]. | 1-gen-2023 | Lannunziata, ErikaGiubilini, AlbertoSaboori, AbdollahMinetola, Paolo | 2023 - FAIM - PEEK by FFF.pdf |
| Enhanced surface properties and bioactivity of additively manufactured 316L stainless steel using different post-treatments / Behjat, A.; Shamanian, M.; Taherizadeh, A.; Noori, M.; Lannunziata, E.; Iuliano, L.; Saboori, A.. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 70:(2022), pp. 188-194. (Intervento presentato al convegno The International Conference on Additive Manufacturing for a Better World tenutosi a Singapore nel August 2022) [10.1016/j.matpr.2022.09.019]. | 1-gen-2022 | Behjat A.Lannunziata E.Iuliano L.Saboori A. + | 1-s2.0-S2214785322058102-main.pdf |
| Laser powder bed fusion of AISI 316L lattice structures for biomedical applications / Lannunziata, Erika; Saboori, Abdollah; Galati, Manuela; Iuliano, Luca. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - (2022). (Intervento presentato al convegno The International Conference on Additive Manufacturing for a Better World. tenutosi a Singapore) [10.1016/j.matpr.2022.09.267]. | 1-gen-2022 | Lannunziata, ErikaSaboori, AbdollahGalati, ManuelaIuliano, Luca | 1-s2.0-S2214785322060850-main.pdf |
| Study on the machinability of Ti6Al4V parts produced by electron beam powder bed fusion / Valenza, Federica; Atzeni, Eleonora; Iuliano, Luca; Saboori, Abdollah; Salmi, Alessandro. - (2022). (Intervento presentato al convegno 10th International Conference on Advanced Technologies tenutosi a Van (TR) nel 25-27 novembre 2022). | 1-gen-2022 | Valenza, FedericaAtzeni, EleonoraIuliano, LucaSaboori, AbdollahSalmi, Alessandro | Study on the machinability of Ti6Al4V parts produced by electron beam powder bed fusion - Abstract - Federica Valenza.pdf |
| Analysis of single tracks of IN718 produced by laser powder directed energy deposition process / Piscopo, Gabriele; Atzeni, Eleonora; Biamino, Sara; Iuliano, Luca; Mazzucato, Federico; Saboori, Abdollah; Salmi, Alessandro; Valente, Anna. - ELETTRONICO. - (2021). (Intervento presentato al convegno 14th CIRP Conference on Intelligent computation in manufacturing engineering). | 1-gen-2021 | Piscopo, GabrieleAtzeni, EleonoraBiamino, SaraIuliano, LucaSaboori, AbdollahSalmi, Alessandro + | ICME_2021_DED_IN718_SingleTracks.pdf |
| Effect of heat treatments on the microstructure of Inconel 939 alloy processed by laser powder bed fusion / Marchese, G.; Parizia, S.; Saboori, A.; Bassini, E.; Manfredi, D.; Lombardi, M.; Ugues, D.; Biamino, S.. - (2020). (Intervento presentato al convegno European Powder Metallurgy Congress and Exhibition, Euro PM 2020 nel 2020). | 1-gen-2020 | Marchese G.Parizia S.Saboori A.Bassini E.Manfredi D.Lombardi M.Ugues D.Biamino S. | Marchese et al. EUROPM2020.pdf |
| From Single Scan Tracks to 3D Samples: Effect of Process Parameters on Quality of Ti-6Al-4V Produced by Means of Direct Energy Deposition / Carrozza, Alessandro; Aversa, Alberta; Mazzucato, Federico; Saboori, Abdollah; Valente, Anna; Lombardi, Mariangela; Fino, Paolo; Biamino, Sara.. - (2020). (Intervento presentato al convegno TMS 2020 tenutosi a San Diego nel 23-27 February 2020). | 1-gen-2020 | Carrozza, AlessandroAversa, AlbertaSaboori, AbdollahLombardi, MariangelaFino, PaoloBiamino, Sara. + | - |
| On the Effect of Deposition Patterns on the Residual Stress, Roughness and Microstructure of AISI 316L Samples Produced by Directed Energy Deposition / Piscopo, Gabriele; Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca; Busatto, Mattia; Tusacciu, Simona; Lai, Manuel; Biamino, Sara; Toushekhah, Mostafa; Saboori, Abdollah; Fino, Paolo. - (2020), pp. 206-212. (Intervento presentato al convegno Progress in Digital and Physical Manufacturing (ProDPM'21)) [10.1007/978-3-030-29041-2_26]. | 1-gen-2020 | Piscopo, GabrieleSalmi, AlessandroAtzeni, EleonoraIuliano, LucaTusacciu, SimonaBiamino, SaraSaboori, AbdollahFino, Paolo + | ProDPM19_#19_Piscopo_manuscript_revised.pdf |
| Ti-6Al-4V lattice structures produced by EBM: Heat treatment and mechanical properties / Galati, M.; Saboori, A.; Biamino, S.; Calignano, F.; Lombardi, M.; Marchiandi, G.; Minetola, P.; Fino, P.; Iuliano, L.. - 88:(2020), pp. 411-416. (Intervento presentato al convegno 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2019 tenutosi a ita nel 2019) [10.1016/j.procir.2020.05.071]. | 1-gen-2020 | Galati M.Saboori A.Biamino S.Calignano F.Lombardi M.Marchiandi G.Minetola P.Fino P.Iuliano L. | 1-s2.0-S2212827120303905-main.pdf |
| Effect of heat treatment on microstructural evolution of additively manufactured Inconel 718 and cast alloy / Saboori, Abdollah; Marchese, Giulio; Aversa, Alberta; Bassini, Emilio; Mazzucato, Federico; Valente, Anna; Lombardi, Mariangela; Ugues, Daniele; Biamino, Sara; Fino, Paolo. - CD-ROM. - (2019), pp. 1-6. (Intervento presentato al convegno EuroPM 2019 tenutosi a Maastricht nel 13-17 October 2019). | 1-gen-2019 | Abdollah SabooriGiulio MarcheseAlberta AversaEmilio BassiniMariangela LombardiDaniele UguesSara BiaminoPaolo Fino + | FEPMA-PM2019-4348825-2-F1-4348825-Manuscript-Heat_treatment_of_IN718_Final_PV_Revised.pdf |
| Microstructure And Mechanical Performance Of Ti-6Al-4V Cellular Structures Produced By Electron Beam Melting / Saboori, Abdollah; A (Politecnico Di, Torino; Italy), ; Galati, M; Biamino, S; Minetola, P; Calignano, F; Lombardi, M; Iuliano, L; Fino, P. - CD-ROM. - (2019). (Intervento presentato al convegno EuroPM 2019 tenutosi a Maastricht nel 13-17 October 2019). | 1-gen-2019 | SabooriGalati, MBiamino, SMinetola, PCalignano, FLombardi, MIuliano, LFino, P + | - |
| Accelerated Process Parameter Optimization for Directed Energy Deposition of 316L Stainless Steel / Saboori, Abdollah; Bosio, Federico; Librera, Erica; De Chirico, Michele; Lombardi, Mariangela; Fino, Paolo. - CD-ROM. - (2018), pp. 1-6. (Intervento presentato al convegno EURO PM2018 Congress & Exhibition tenutosi a Bilbao (SPA) nel 14-18 Ottobre 2018). | 1-gen-2018 | Abdollah SabooriFederico BosioMariangela LombardiPaolo Fino + | - |
| Advanced Powder Characterization for Laser Powder-Bed Fusion of AlSi10Mg / Carrozza, Alessandro; Saboori, Abdollah; Biamino, Sara; Lombardi, Mariangela; Aversa, Alberta; Marchese, Giulio; Mark, Cooper; Laura, Howlett. - (2018). (Intervento presentato al convegno European Powder Metallurgy 2018 Congress & Exhibition, Euro PM2018 tenutosi a Bilbao). | 1-gen-2018 | CARROZZA, ALESSANDROAbdollah SabooriSara BiaminoMariangela LombardiAlberta AversaGiulio Marchese + | 3989462.pdf |
| An investigation on the effect of Graphene Nanoplatelets on The Compaction behaviour of Pure Copper Powders / Saboori, Abdollah; Pavese, Matteo; Fino, Paolo. - ELETTRONICO. - (2018), pp. 1-6. (Intervento presentato al convegno Euro PM2018 Congress and Exhibitions tenutosi a Bilbao (Spain) nel 14-18 October 2018). | 1-gen-2018 | Abdollah SabooriMatteo PavesePaolo Fino | - |
| Directed Energy Deposition of 316L Steel: Effect of Type of Powders and Gas Related Parameters / Bosio, Federico; Saboori, Abdollah; Andrea, Lacagnina; Erica, Librera; Michele De Chirico, ; Biamino, Sara; Fino, Paolo; Lombardi, Mariangela. - CD-ROM. - (2018), pp. 1-6. (Intervento presentato al convegno EURO PM2018 Congress & Exhibition tenutosi a Bilbao (SPA) nel 14-18 Ottobre 2018). | 1-gen-2018 | BOSIO, FEDERICOAbdollah SabooriSara BiaminoPaolo FinoMariangela Lombardi + | - |
| Graphene Reinforced Aluminum Matrix Composites Produced by Powder Metallurgy; Microstructure, Thermophysical And Mechanical Properties / Saboori, Abdollah; Pavese, Matteo; Fino, Paolo. - ELETTRONICO. - (2018), pp. 1-6. (Intervento presentato al convegno Euro PM 2018 Conference and Exhibition tenutosi a Bilbao (Spain) nel 14-18 Oct 2018). | 1-gen-2018 | SABOORI, ABDOLLAHMatteo PavesePaolo Fino | - |
| The Capacity Of Cold Spray Additive Manufacturing Technology For Metallic Part Repairing / Saboori, Abdollah; Biamino, Sara; Valente, Anna; Gitardi, Diego; Basile, Gloria; Lombardi, Mariangela; Fino, Paolo. - CD-ROM. - (2018), pp. 1-6. (Intervento presentato al convegno Euro PM2018 tenutosi a Bilabao, Spain nel 14-18 October 2018). | 1-gen-2018 | Abdollah SabooriSara BiaminoGloria BasileMariangela LombardiPaolo Fino + | - |