Archivio Istituzionale della RicercaMINETOLA, PAOLO
MINETOLA, PAOLO
Dipartimento di Ingegneria Gestionale e della Produzione
012994
A preliminary study on multi‐material fused filament fabrication of an embedded strain gauge for low‐cost real‐time monitoring of part strain
2024 Minetola, Paolo; Giubilini, Alberto
Effect of annealing treatment and infill percentage on 3D-printed PEEK samples by Fused Filament Fabrication
2024 Lannunziata, Erika; Colucci, Giovanna; Minetola, Paolo; Giubilini, Alberto
3D-Printed Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-Cellulose-Based Scaffolds for Biomedical Applications
2023 Giubilini, Alberto; Messori, Massimo; Bondioli, Federica; Minetola, Paolo; Iuliano, Luca; Nyström, Gustav; Maniura-Weber, Katharina; Rottmar, Markus; Siqueira, Gilberto
An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data
2023 Khandpur, M. S.; Minetola, P.; Stiuso, V.; Rifuggiato, S.; Fontana, L.; Lannunziata, E.; Giubilini, A.; Iuliano, L.
Enamel Analysis by 3D Scanning after Three Orthodontic Clean-Up Procedures: An In-Vitro Test of a New Piezoelectric Tool
2023 Nardi, Gianna Maria; Mazur, Marta; Grassi, Roberta; Rifuggiato, Serena; Stiuso, Vito; Janiszewska-Olszowska, Joanna; Ottolenghi, Livia; Barbato, Ersilia; Minetola, Paolo; Iuliano, Luca
Influence of Process Parameters on Compression Properties of 3D Printed Polyether-Ether-Ketone by Fused Filament Fabrication
2023 Lannunziata, Erika; Giubilini, Alberto; Saboori, Abdollah; Minetola, Paolo
Multimaterial 3D printing of auxetic jounce bumpers for automotive suspensions
2023 Giubilini, Alberto; Minetola, Paolo
Novel 3D printable bio-based and biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) microspheres for selective laser sintering applications
2023 Giubilini, A.; Colucci, G.; De Trane, Giorgio; Lupone, F.; Badini, C.; Minetola, P.; Bondioli, F.; Messori, M.
A structured comparison of decentralized additive manufacturing centers based on quality and sustainability
2022 Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Catalano, Angioletta R.; Priarone, Paolo C.
An investigation of the influence of 3d printing defects on the tensile performance of ABS material
2022 Rifuggiato, Serena; Minetola, Paolo; Stiuso, Vito; Khandpur, MANKIRAT SINGH; Fontana, Luca; Iuliano, Luca
An investigation of the influence of 3d printing parameters on the tensile strength of PLA material
2022 Fontana, Luca; Minetola, Paolo; Iuliano, Luca; Rifuggiato, Serena; Khandpur, MANKIRAT SINGH; Stiuso, Vito
Benchmarking analysis of digital light processing resins in terms of dimensional accuracy and geometric tolerances
2022 Stiuso, V.; Minetola, P.; Giubilini, A.; Fontana, L.; Khandpur, M. S.; Rifuggiato, S.; Marchiandi, G.
Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses
2022 Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo
In-Situ Monitoring for Open Low-Cost 3d Printing
2022 Minetola, P.; Khandpur, M. S.; Iuliano, L.; Calignano, F.; Galati, M.; Fontana, L.
Introducing sustainability themes in STEM education: evidences from some European countries
2022 Antonelli, Dario; Minetola, Paolo; Priarone, PAOLO CLAUDIO; Maffei, Antonio; Lanzetta, Michele; Stadnicka, Dorota; Podržaj, Primož
Proposal of an Innovative Benchmark for the Evaluation of 3D Printing Accuracy for Photopolymers
2022 Minetola, Paolo; de Freitas Pacheco, Vinicius; Massarani, Marcelo; Calignano, Flaviana; Marchiandi, Giovanni
Quality and sustainability benchmarking of decentralized additive manufacturing processes
2022 Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Priarone, PAOLO CLAUDIO
Toward a sustainable educational engineer archetype through Industry 4.0
2022 Lupi, Francesco; Mabkhot, Mohammed M.; Finžgar, Miha; Minetola, Paolo; Stadnicka, Dorota; Maffei, Antonio; Litwin, Paweł; Boffa, Eleonora; Ferreira, Pedro; Podržaj, Primož; Chelli, Riccardo; Lohse, Niels; Lanzetta, Michele
Variability in Section Loss and Maximum Pit Depth of Corroded Prestressing Wires
2022 Franceschini, Lorenzo; Vecchi, Francesca; Tondolo, Francesco; Belletti, Beatrice; Montero, Javier Sánchez; Minetola, Paolo
A Finite Element approach for the prediction of the mechanical behaviour of layered composites produced by Continuous Filament Fabrication ({CFF})
2021 Galati, Manuela; Viccica, Marco; Minetola, Paolo
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| A preliminary study on multi‐material fused filament fabrication of an embedded strain gauge for low‐cost real‐time monitoring of part strain / Minetola, Paolo; Giubilini, Alberto. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9520. - ELETTRONICO. - (2024). | 1-gen-2024 | Minetola, PaoloGiubilini, Alberto | - |
| Effect of annealing treatment and infill percentage on 3D-printed PEEK samples by Fused Filament Fabrication / Lannunziata, Erika; Colucci, Giovanna; Minetola, Paolo; Giubilini, Alberto. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - 131:(2024), pp. 5209-5222. [10.1007/s00170-024-13347-8] | 1-gen-2024 | Lannunziata, ErikaColucci, GiovannaMinetola, PaoloGiubilini, Alberto | s00170-024-13347-8.pdf |
| 3D-Printed Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-Cellulose-Based Scaffolds for Biomedical Applications / Giubilini, Alberto; Messori, Massimo; Bondioli, Federica; Minetola, Paolo; Iuliano, Luca; Nyström, Gustav; Maniura-Weber, Katharina; Rottmar, Markus; Siqueira, Gilberto. - In: BIOMACROMOLECULES. - ISSN 1525-7797. - ELETTRONICO. - (2023). [10.1021/acs.biomac.3c00263] | 1-gen-2023 | Giubilini, AlbertoMessori, MassimoBondioli, FedericaMinetola, PaoloIuliano, Luca + | acs.biomac.3c00263.pdf |
| An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data / Khandpur, M. S.; Minetola, P.; Stiuso, V.; Rifuggiato, S.; Fontana, L.; Lannunziata, E.; Giubilini, A.; Iuliano, L.. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - (2023). (Intervento presentato al convegno Fourth International Conference on Recent Advances in Materials and Manufacturing 2022 tenutosi a Erode, Tamil Nadu (INDIA) nel 08-09/12/2022) [10.1016/j.matpr.2023.03.385]. | 1-gen-2023 | Khandpur M. S.Minetola P.Stiuso V.Rifuggiato S.Fontana L.Lannunziata E.Giubilini A.Iuliano L. | 2023_An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data.pdf |
| Enamel Analysis by 3D Scanning after Three Orthodontic Clean-Up Procedures: An In-Vitro Test of a New Piezoelectric Tool / Nardi, Gianna Maria; Mazur, Marta; Grassi, Roberta; Rifuggiato, Serena; Stiuso, Vito; Janiszewska-Olszowska, Joanna; Ottolenghi, Livia; Barbato, Ersilia; Minetola, Paolo; Iuliano, Luca. - In: INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH. - ISSN 1660-4601. - ELETTRONICO. - 20:3(2023), pp. 1-14. [10.3390/ijerph20032516] | 1-gen-2023 | Rifuggiato, SerenaStiuso, VitoMinetola, PaoloIuliano, Luca + | ijerph-20-02516.pdf |
| Influence of Process Parameters on Compression Properties of 3D Printed Polyether-Ether-Ketone by Fused Filament Fabrication / Lannunziata, Erika; Giubilini, Alberto; Saboori, Abdollah; Minetola, Paolo. - ELETTRONICO. - 1:(2023), pp. 336-344. (Intervento presentato al convegno Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems. FAIM 2023 tenutosi a Porto nel Giugno) [10.1007/978-3-031-38241-3_38]. | 1-gen-2023 | Lannunziata, ErikaGiubilini, AlbertoSaboori, AbdollahMinetola, Paolo | - |
| Multimaterial 3D printing of auxetic jounce bumpers for automotive suspensions / Giubilini, Alberto; Minetola, Paolo. - In: RAPID PROTOTYPING JOURNAL. - ISSN 1355-2546. - 29:11(2023), pp. 131-142. [10.1108/RPJ-02-2023-0066] | 1-gen-2023 | Giubilini, AlbertoMinetola, Paolo | - |
| Novel 3D printable bio-based and biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) microspheres for selective laser sintering applications / Giubilini, A.; Colucci, G.; De Trane, Giorgio; Lupone, F.; Badini, C.; Minetola, P.; Bondioli, F.; Messori, M.. - In: MATERIALS TODAY SUSTAINABILITY. - ISSN 2589-2347. - ELETTRONICO. - 22:(2023), pp. 1-9. [10.1016/j.mtsust.2023.100379] | 1-gen-2023 | Giubilini, A.Colucci, G.Lupone, F.Badini, C.Minetola, P.Bondioli, F.Messori, M. + | 2023 - PHBH microspheres for SLS.pdf |
| A structured comparison of decentralized additive manufacturing centers based on quality and sustainability / Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Catalano, Angioletta R.; Priarone, Paolo C.. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - 121:1-2(2022), pp. 993-1014. [10.1007/s00170-022-09288-9] | 1-gen-2022 | Maisano, Domenico A.Verna, ElisaMinetola, PaoloLunetto, VincenzoCatalano, Angioletta R.Priarone, Paolo C. | IJAMT_Maisano2022_Article_AStructuredComparisonOfDecentr.pdf |
| An investigation of the influence of 3d printing defects on the tensile performance of ABS material / Rifuggiato, Serena; Minetola, Paolo; Stiuso, Vito; Khandpur, MANKIRAT SINGH; Fontana, Luca; Iuliano, Luca. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 57:(2022), pp. 851-858. (Intervento presentato al convegno Third International Conference on Aspects of Materials Science and Engineering (ICAMSE 2022) tenutosi a Chandigarh (India) nel 4-5 marzo 2022) [10.1016/j.matpr.2022.02.486]. | 1-gen-2022 | Serena RifuggiatoPaolo MinetolaVito StiusoMankirat Singh KhandpurLuca FontanaLuca Iuliano | 2022 - ICAMSE Rifuggiato.pdf |
| An investigation of the influence of 3d printing parameters on the tensile strength of PLA material / Fontana, Luca; Minetola, Paolo; Iuliano, Luca; Rifuggiato, Serena; Khandpur, MANKIRAT SINGH; Stiuso, Vito. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 57:(2022), pp. 657-663. (Intervento presentato al convegno Third International Conference on Aspects of Materials Science and Engineering (ICAMSE 2022) tenutosi a Chandigarh (India) nel 4-5 marzo 2022) [10.1016/j.matpr.2022.02.078]. | 1-gen-2022 | Luca FontanaPaolo MinetolaLuca IulianoSerena RifuggiatoMankirat Singh KhandpurVito Stiuso | 2022 - ICAMSE Fontana.pdf |
| Benchmarking analysis of digital light processing resins in terms of dimensional accuracy and geometric tolerances / Stiuso, V.; Minetola, P.; Giubilini, A.; Fontana, L.; Khandpur, M. S.; Rifuggiato, S.; Marchiandi, G.. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 62:(2022), pp. 6654-6662. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2022) tenutosi a Madhya Pradesh (India) nel 9-10 aprile 2022) [10.1016/j.matpr.2022.04.658]. | 1-gen-2022 | Stiuso V.Minetola P.Giubilini A.Fontana L.Khandpur M. S.Rifuggiato S.Marchiandi G. | 2022 - IC4M Stiuso.pdf |
| Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses / Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 14:17(2022), pp. 1-19. [10.3390/polym14173530] | 1-gen-2022 | Fontana, LucaGiubilini, AlbertoArrigo, RossellaMalucelli, GiulioMinetola, Paolo | polymers-14-03530-v3.pdf |
| In-Situ Monitoring for Open Low-Cost 3d Printing / Minetola, P.; Khandpur, M. S.; Iuliano, L.; Calignano, F.; Galati, M.; Fontana, L.. - ELETTRONICO. - (2022), pp. 49-56. (Intervento presentato al convegno 10th International Conference on Manufacturing Engineering and Processes 2021 (ICMEP 2021) tenutosi a Singapore (Virtual) nel 11–14 marzo 2021) [10.1007/978-981-16-3934-0_7]. | 1-gen-2022 | Minetola P.Khandpur M. S.Iuliano L.Calignano F.Galati M.Fontana L. | Printed version_Minetola_ICMT2021.pdf |
| Introducing sustainability themes in STEM education: evidences from some European countries / Antonelli, Dario; Minetola, Paolo; Priarone, PAOLO CLAUDIO; Maffei, Antonio; Lanzetta, Michele; Stadnicka, Dorota; Podržaj, Primož. - ELETTRONICO. - (2022), pp. 312-314. (Intervento presentato al convegno 4th International Conference on Higher Education Learning Methodologies and Technologies Online tenutosi a Palermo nel September 21-23, 2022). | 1-gen-2022 | Dario AntonelliPaolo MinetolaPaolo Claudio PriaroneMichele Lanzetta + | abstract HELMETO 2022_Antonelli.pdf |
| Proposal of an Innovative Benchmark for the Evaluation of 3D Printing Accuracy for Photopolymers / Minetola, Paolo; de Freitas Pacheco, Vinicius; Massarani, Marcelo; Calignano, Flaviana; Marchiandi, Giovanni. - ELETTRONICO. - 1048:(2022), pp. 279-290. (Intervento presentato al convegno 3rd International Conference on Materials Science and Manufacturing Technology (ICMSMT 2021) tenutosi a Tamil Nadu, India nel 8-9 aprile 2021) [10.4028/www.scientific.net/MSF.1048.279]. | 1-gen-2022 | Minetola, PaoloCalignano, FlavianaMarchiandi, Giovanni + | MSF.1048.279.pdf; Pre-print_MSF1048_Minetola.pdf |
| Quality and sustainability benchmarking of decentralized additive manufacturing processes / Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Priarone, PAOLO CLAUDIO. - ELETTRONICO. - (2022). (Intervento presentato al convegno AITeM 2021 - XV Convegno dell’Associazione Italiana Tecnologie Manifatturiere tenutosi a Milano (Italy) nel 17-19 January 2022). | 1-gen-2022 | Domenico A. MaisanoElisa VernaPaolo MinetolaVincenzo LunettoPaolo Claudio Priarone | AITEM2021_Full_Paper_(Final_Version).pdf |
| Toward a sustainable educational engineer archetype through Industry 4.0 / Lupi, Francesco; Mabkhot, Mohammed M.; Finžgar, Miha; Minetola, Paolo; Stadnicka, Dorota; Maffei, Antonio; Litwin, Paweł; Boffa, Eleonora; Ferreira, Pedro; Podržaj, Primož; Chelli, Riccardo; Lohse, Niels; Lanzetta, Michele. - In: COMPUTERS IN INDUSTRY. - ISSN 0166-3615. - ELETTRONICO. - 134:(2022), pp. 1-16. [https://doi.org/10.1016/j.compind.2021.103543] | 1-gen-2022 | Minetola, PaoloBoffa, Eleonora + | 2021 - Engineer Archetype I4.0.pdf |
| Variability in Section Loss and Maximum Pit Depth of Corroded Prestressing Wires / Franceschini, Lorenzo; Vecchi, Francesca; Tondolo, Francesco; Belletti, Beatrice; Montero, Javier Sánchez; Minetola, Paolo. - ELETTRONICO. - (2022), pp. 491-498. (Intervento presentato al convegno 1st Conference of the European Association on Quality Control of Bridges and Structures (EUROSTRUCT 2021) tenutosi a Padova nel 29 agosto - 1 settembre 2021) [10.1007/978-3-030-91877-4_56]. | 1-gen-2022 | Vecchi, FrancescaTondolo, FrancescoBelletti, BeatriceMinetola, Paolo + | Variability in Section Loss and Maximum Pit Depth of Corroded Prestressing Wires.pdf; Variability in Section Loss and Maximum Pit Depth of Corroded Prestressing Wires_pre-print.pdf |
| A Finite Element approach for the prediction of the mechanical behaviour of layered composites produced by Continuous Filament Fabrication ({CFF}) / Galati, Manuela; Viccica, Marco; Minetola, Paolo. - In: POLYMER TESTING. - ISSN 0142-9418. - ELETTRONICO. - 98:(2021), p. 107181. [10.1016/j.polymertesting.2021.107181] | 1-gen-2021 | Manuela GalatiMarco ViccicaPaolo Minetola | 1-s2.0-S0142941821001318-main.pdf |