FONTANA, LUCA
FONTANA, LUCA
Dipartimento Scienza Applicata e Tecnologia
049574
An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data
2023 Khandpur, M. S.; Minetola, P.; Stiuso, V.; Rifuggiato, S.; Fontana, L.; Lannunziata, E.; Giubilini, A.; Iuliano, L.
Analisi della sostenibilità e aspetti di responsabilità legale nella decentralizzazione della produzione mediante stampa 3D
2023 Fontana, Luca
An investigation of the influence of 3d printing defects on the tensile performance of ABS material
2022 Rifuggiato, Serena; Minetola, Paolo; Stiuso, Vito; Khandpur, MANKIRAT SINGH; Fontana, Luca; Iuliano, Luca
An investigation of the influence of 3d printing parameters on the tensile strength of PLA material
2022 Fontana, Luca; Minetola, Paolo; Iuliano, Luca; Rifuggiato, Serena; Khandpur, MANKIRAT SINGH; Stiuso, Vito
Benchmarking analysis of digital light processing resins in terms of dimensional accuracy and geometric tolerances
2022 Stiuso, V.; Minetola, P.; Giubilini, A.; Fontana, L.; Khandpur, M. S.; Rifuggiato, S.; Marchiandi, G.
Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses
2022 Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo
In-Situ Monitoring for Open Low-Cost 3d Printing
2022 Minetola, P.; Khandpur, M. S.; Iuliano, L.; Calignano, F.; Galati, M.; Fontana, L.
Development of a low-cost monitoring system for open 3d printing
2021 Khandpur, M S; Galati, M; Minetola, P; Marchiandi, G; Fontana, L; Stiuso, V
Experimental assessment of compensated distortion in selective laser melting of Ti6Al4V parts
2021 Stiuso, V; Minetola, P; Calignano, F; Galati, M; Khandpur, M S; Fontana, L
Experimental testing of 3D printed polymeric heat exchangers
2021 Fontana, L; Minetola, P; Calignano, F; Iuliano, L; Khandpur, M S; Stiuso, V
Experimental validation of laser powder bed fusion simulation
2021 Minetola, Paolo; Stiuso, Vito; Calignano, Flaviana; Galati, Manuela; Khandpur, Mankirat Singh; Fontana, Luca
Mechanical Performance of Polylactic Acid from Sustainable Screw-Based 3D Printing
2021 Minetola, Paolo; Fontana, Luca; Arrigo, Rossella; Malucelli, Giulio; Iuliano, Luca
Comparison of dimensional tolerance grades for metal AM processes
2020 Minetola, Paolo; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca; Rizza, Giovanni; Fontana, Luca
Citazione | Data di pubblicazione | Autori | File |
---|---|---|---|
An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data / Khandpur, M. S.; Minetola, P.; Stiuso, V.; Rifuggiato, S.; Fontana, L.; Lannunziata, E.; Giubilini, A.; Iuliano, L.. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - (2023). (Intervento presentato al convegno Fourth International Conference on Recent Advances in Materials and Manufacturing 2022 tenutosi a Erode, Tamil Nadu (INDIA) nel 08-09/12/2022) [10.1016/j.matpr.2023.03.385]. | 1-gen-2023 | Khandpur M. S.Minetola P.Stiuso V.Rifuggiato S.Fontana L.Lannunziata E.Giubilini A.Iuliano L. | 2023_An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data.pdf |
Analisi della sostenibilità e aspetti di responsabilità legale nella decentralizzazione della produzione mediante stampa 3D / Fontana, Luca. - (2023 Jun 23), pp. 1-147. | 23-giu-2023 | FONTANA, LUCA | pdf_a_tesi_fontana_luca_268338_reviewed_final.pdf; riassunto_tesi_fontana_luca_268338.pdf |
An investigation of the influence of 3d printing defects on the tensile performance of ABS material / Rifuggiato, Serena; Minetola, Paolo; Stiuso, Vito; Khandpur, MANKIRAT SINGH; Fontana, Luca; Iuliano, Luca. - ELETTRONICO. - 57:(2022), pp. 851-858. (Intervento presentato al convegno Third International Conference on Aspects of Materials Science and Engineering (ICAMSE 2022) tenutosi a Chandigarh (India) nel 4-5 marzo 2022) [10.1016/j.matpr.2022.02.486]. | 1-gen-2022 | Serena RifuggiatoPaolo MinetolaVito StiusoMankirat Singh KhandpurLuca FontanaLuca Iuliano | 2022 - ICAMSE Rifuggiato.pdf |
An investigation of the influence of 3d printing parameters on the tensile strength of PLA material / Fontana, Luca; Minetola, Paolo; Iuliano, Luca; Rifuggiato, Serena; Khandpur, MANKIRAT SINGH; Stiuso, Vito. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 57:(2022), pp. 657-663. (Intervento presentato al convegno Third International Conference on Aspects of Materials Science and Engineering (ICAMSE 2022) tenutosi a Chandigarh (India) nel 4-5 marzo 2022) [10.1016/j.matpr.2022.02.078]. | 1-gen-2022 | Luca FontanaPaolo MinetolaLuca IulianoSerena RifuggiatoMankirat Singh KhandpurVito Stiuso | 2022 - ICAMSE Fontana.pdf |
Benchmarking analysis of digital light processing resins in terms of dimensional accuracy and geometric tolerances / Stiuso, V.; Minetola, P.; Giubilini, A.; Fontana, L.; Khandpur, M. S.; Rifuggiato, S.; Marchiandi, G.. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 62:(2022), pp. 6654-6662. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2022) tenutosi a Madhya Pradesh (India) nel 9-10 aprile 2022) [10.1016/j.matpr.2022.04.658]. | 1-gen-2022 | Stiuso V.Minetola P.Giubilini A.Fontana L.Khandpur M. S.Rifuggiato S.Marchiandi G. | 2022 - IC4M Stiuso.pdf |
Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses / Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 14:17(2022), pp. 1-19. [10.3390/polym14173530] | 1-gen-2022 | Fontana, LucaGiubilini, AlbertoArrigo, RossellaMalucelli, GiulioMinetola, Paolo | polymers-14-03530-v3.pdf |
In-Situ Monitoring for Open Low-Cost 3d Printing / Minetola, P.; Khandpur, M. S.; Iuliano, L.; Calignano, F.; Galati, M.; Fontana, L.. - ELETTRONICO. - (2022), pp. 49-56. (Intervento presentato al convegno 10th International Conference on Manufacturing Engineering and Processes 2021 (ICMEP 2021) tenutosi a Singapore (Virtual) nel 11–14 marzo 2021) [10.1007/978-981-16-3934-0_7]. | 1-gen-2022 | Minetola P.Khandpur M. S.Iuliano L.Calignano F.Galati M.Fontana L. | Printed version_Minetola_ICMT2021.pdf |
Development of a low-cost monitoring system for open 3d printing / Khandpur, M S; Galati, M; Minetola, P; Marchiandi, G; Fontana, L; Stiuso, V. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - 1136:(2021), p. 012044. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021) tenutosi a Madhya Pradesh, India nel 6th-7th March 2021) [10.1088/1757-899x/1136/1/012044]. | 1-gen-2021 | Khandpur, M SGalati, MMinetola, PMarchiandi, GFontana, LStiuso, V | Khandpur_2021_IOP_Conf_Ser_Mater_Sci_Eng_1136_012044.pdf |
Experimental assessment of compensated distortion in selective laser melting of Ti6Al4V parts / Stiuso, V; Minetola, P; Calignano, F; Galati, M; Khandpur, M S; Fontana, L. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - 1136:(2021), p. 012048. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021) tenutosi a Madhya Pradesh, India nel 6th-7th March 2021) [10.1088/1757-899x/1136/1/012048]. | 1-gen-2021 | Stiuso, VMinetola, PCalignano, FGalati, MKhandpur, M SFontana, L | Stiuso_2021_IOP_Conf_Ser_Mater_Sci_Eng_1136_012048.pdf |
Experimental testing of 3D printed polymeric heat exchangers / Fontana, L; Minetola, P; Calignano, F; Iuliano, L; Khandpur, M S; Stiuso, V. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - 1136:(2021), p. 012047. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021) tenutosi a Madhya Pradesh, India nel 6th-7th March 2021) [10.1088/1757-899x/1136/1/012047]. | 1-gen-2021 | Fontana, LMinetola, PCalignano, FIuliano, LKhandpur, M SStiuso, V | Fontana_2021_IOP_Conf_Ser_Mater_Sci_Eng_1136_012047.pdf |
Experimental validation of laser powder bed fusion simulation / Minetola, Paolo; Stiuso, Vito; Calignano, Flaviana; Galati, Manuela; Khandpur, Mankirat Singh; Fontana, Luca. - ELETTRONICO. - (2021), pp. 1-10. (Intervento presentato al convegno 3rd International Conference on Inventive Research in Material Science and Technology (ICIRMCT 2021) tenutosi a Coimbatore (India) nel 22-23 gennaio 2021) [10.1088/1757-899X/1091/1/012048]. | 1-gen-2021 | Minetola, PaoloStiuso, VitoCalignano, FlavianaGalati, ManuelaKhandpur, Mankirat SinghFontana, Luca | Minetola_2021_IOP_Conf._Ser.__Mater._Sci._Eng._1091_012048.pdf |
Mechanical Performance of Polylactic Acid from Sustainable Screw-Based 3D Printing / Minetola, Paolo; Fontana, Luca; Arrigo, Rossella; Malucelli, Giulio; Iuliano, Luca. - ELETTRONICO. - 200:(2021), pp. 531-542. (Intervento presentato al convegno Sustainable Design and Manufacturing 2020 (SDM2020) tenutosi a KES Virtual Conference Centre nel 9-11 settembre 2020) [10.1007/978-981-15-8131-1_47]. | 1-gen-2021 | Minetola, PaoloFontana, LucaArrigo, RossellaMalucelli, GiulioIuliano, Luca | Articolo SDM2020_versione a stampa.pdf; SDM2020-091_draft.pdf |
Comparison of dimensional tolerance grades for metal AM processes / Minetola, Paolo; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca; Rizza, Giovanni; Fontana, Luca. - ELETTRONICO. - 88:(2020), pp. 399-404. (Intervento presentato al convegno 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME '19 tenutosi a Ischia (NA), Gulf of Naples, Italy nel 17-19 July 2019) [https://doi.org/10.1016/j.procir.2020.05.069]. | 1-gen-2020 | Minetola, PaoloGalati, ManuelaCalignano, FlavianaIuliano, LucaRizza, GiovanniFontana, Luca | ICME 2019 - Benchmarking Metal AM.pdf |