Archivio Istituzionale della RicercaPRIARONE, PAOLO CLAUDIO
PRIARONE, PAOLO CLAUDIO
Dipartimento di Ingegneria Gestionale e della Produzione
016764
An approach for integrating performance evaluation and environmental sustainability assessment for hybrid additive-subtractive manufacturing
2026 Priarone, Paolo C.; Magnanini, Maria Chiara
Energy efficiency in digital infrastructures: a framework towards a sustainable cloud manufacturing
2026 Simeone, Alessandro; Caggiano, Alessandra; Melone, Maria; Muraro, Simone; Priarone, Paolo C.; Settineri, Luca
Parametric modeling of cradle-to-gate carbon emissions from gas-atomized AISI 316L powders under closed-loop feedstock strategies
2026 Priarone, Paolo C.; Gobber, Federico Simone; Cacace, Stefania
A framework for digital assembly instructions as a step towards manufacturing inclusiveness
2025 Fan, Yuchen; Simeone, Alessandro; Antonelli, Dario; Caggiano, Alessandra; Priarone, Paolo C.; Settineri, Luca
A framework for integrating design optimization and manufacturability in electric vehicle production
2025 Favazza, Enrico; Borsato, Luca; Zhang, Jian; Simeone, Alessandro; Priarone, Paolo C.; Settineri, Luca
A logic-assisted assembly support system to promote the inclusion of neurodiverse operators in manufacturing
2025 Fan, Yuchen; Simeone, Alessandro; Antonelli, Dario; Catalano, Angioletta R.; Priarone, Paolo C.; Settineri, Luca
An appraisal of integrating multi-jet fusion (MJF) additive manufacturing into automotive production lines
2025 Atzeni, Eleonora; Priarone, Paolo C.; Salmi, Alessandro
CMT deposition of stainless steel: effects of process parameters on energy demand and microstructure
2025 Catalano, A. R.; Tebaldo, V.; Priarone, P. C.; Settineri, L.; Faga, M. G.
Conceptualisation of a multimodal, non-intrusive, generative AI-based assistive system for assembly
2025 Simeone, A.; Fan, Y.; Antonelli, D.; Priarone, P. C.; Settineri, L.
Development of a repair strategy for a thin aerospace component with dot-by-dot deposition approach
2025 Campatelli, G.; Carvalho, G. H. S. F. L.; Priarone, P. C.
Development of an AI-based informational assistance system for assembly accounting for dyslexia
2025 Fan, Yuchen; Simeone, Alessandro; Antonelli, Dario; Caggiano, Alessandra; Priarone, Paolo C.; Settineri, Luca
Electric or internal combustion vehicles? A Life Cycle Assessment in São Paulo
2025 Maselli, Michele; Pelegrina, Juliano; Marotti De Mello, Adriana; Ribeiro Souza, João Valsecchi; Marx, Roberto; Priarone, Paolo C.
Evaluating the use of scrap metal to produce Al-5Cu-3Ti-1Cr-1Fe alloy powder for laser powder bed fusion
2025 Monti, Chiara; Gobber, Federico Simone; Turani, Matteo; Papis, Konrad; Priarone, Paolo C.; Actis Grande, Marco; Bambach, Markus
From Waste To Feedstock: Feasibility Of Recycling AA5183 Alloy Chips Into Powders For Additive Manufacturing
2025 Gobber, Federico Simone; Priarone, Paolo C.; Pennacchio, Antonio; Actis Grande, Marco
Machining of Critical Aerospace Components: Challenges and Case Studies
2025 Grossi, Niccolò; Albertelli, Paolo; Bertolini, Rachele; Caggiano, Alessandra; Campatelli, Gianni; Cragnolini, Matteo; Maurizio, Andrea Lelio; Nele, Luigi; Priarone, Paolo C.; Scippa, Antonio; Sortino, Marco; Totis, Giovanni; Turchetta, Sandro
SEAform’s Modular Floating Platforms: A Comprehensive Environmental Impact Evaluation
2025 Pincetti, Letizia; Sirigu, Sergej A.; Rosiello, Alice; Chicco, Carola; Viotti, Fabio; Priarone, Paolo C.
A methodology to assess social sustainability of multi-tier supply chains in the textile industry
2024 Olivero, Francesco; Tuni, Andrea; Priarone, Paolo C.; Morandi, Fabiana; Bassani, Giorgia
An Approach To Evaluate Quality And Sustainability For Powders Produced By A Lab – Scale Atomizer
2024 Simone Gobber, Federico; Pennacchio, Antonio; Actis Grande, Marco; Priarone, Paolo
An economic evaluation of hybrid WAAM-subtractive manufacturing in relation to deposition process parameters
2024 Catalano, Angioletta R.; Priarone, Paolo C.; Settineri, Luca
Blended learning in the engineering field: A systematic literature review
2024 Sala, Roberto; Maffei, Antonio; Pirola, Fabiana; Enoksson, Fredrik; Ljubić, Sandi; Skoki, Arian; Zammit, Joseph P.; Bonello, Amberlynn; Podržaj, Primož; Žužek, Tena; Priarone, Paolo C.; Antonelli, Dario; Pezzotta, Giuditta
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| An approach for integrating performance evaluation and environmental sustainability assessment for hybrid additive-subtractive manufacturing / Priarone, Paolo C.; Magnanini, Maria Chiara. - In: CIRP - JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY. - ISSN 1755-5817. - STAMPA. - 64:(2026), pp. 65-78. [10.1016/j.cirpj.2025.11.009] | 1-gen-2026 | Priarone, Paolo C. + | - |
| Energy efficiency in digital infrastructures: a framework towards a sustainable cloud manufacturing / Simeone, Alessandro; Caggiano, Alessandra; Melone, Maria; Muraro, Simone; Priarone, Paolo C.; Settineri, Luca. - 138:(2026), pp. 921-926. ( 18th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2024 Italia 2024) [10.1016/j.procir.2026.01.159]. | 1-gen-2026 | Simeone, AlessandroMuraro, SimonePriarone, Paolo C.Settineri, Luca + | 1-s2.0-S2212827126001605-main.pdf |
| Parametric modeling of cradle-to-gate carbon emissions from gas-atomized AISI 316L powders under closed-loop feedstock strategies / Priarone, Paolo C.; Gobber, Federico Simone; Cacace, Stefania. - In: POWDER TECHNOLOGY. - ISSN 0032-5910. - STAMPA. - 470:(2026), pp. 1-12. [10.1016/j.powtec.2025.121949] | 1-gen-2026 | Priarone, Paolo C.Gobber, Federico Simone + | - |
| A framework for digital assembly instructions as a step towards manufacturing inclusiveness / Fan, Yuchen; Simeone, Alessandro; Antonelli, Dario; Caggiano, Alessandra; Priarone, Paolo C.; Settineri, Luca. - ELETTRONICO. - 132:(2025), pp. 116-121. ( 12th CIRP Global Web Conference (CIRPe 2024)) [10.1016/j.procir.2025.01.020]. | 1-gen-2025 | Fan, YuchenSimeone, AlessandroAntonelli, DarioPriarone, Paolo C.Settineri, Luca + | - |
| A framework for integrating design optimization and manufacturability in electric vehicle production / Favazza, Enrico; Borsato, Luca; Zhang, Jian; Simeone, Alessandro; Priarone, Paolo C.; Settineri, Luca. - ELETTRONICO. - 136:(2025), pp. 775-780. ( 35th CIRP Design Conference, CIRP Design 2025 Patras (Greece) 02-04 April 2025) [10.1016/j.procir.2025.08.132]. | 1-gen-2025 | Favazza, EnricoBorsato, LucaZhang, JianSimeone, AlessandroPriarone, Paolo C.Settineri, Luca | - |
| A logic-assisted assembly support system to promote the inclusion of neurodiverse operators in manufacturing / Fan, Yuchen; Simeone, Alessandro; Antonelli, Dario; Catalano, Angioletta R.; Priarone, Paolo C.; Settineri, Luca. - ELETTRONICO. - 135:(2025), pp. 1119-1124. ( 32nd CIRP Conference on Life Cycle Engineering (LCE2025) Manchester ) [10.1016/j.procir.2024.12.110]. | 1-gen-2025 | Fan, YuchenSimeone, AlessandroAntonelli, DarioCatalano, Angioletta R.Priarone, Paolo C.Settineri, Luca | - |
| An appraisal of integrating multi-jet fusion (MJF) additive manufacturing into automotive production lines / Atzeni, Eleonora; Priarone, Paolo C.; Salmi, Alessandro. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - 10:8(2025), pp. 4689-4703. [10.1007/s40964-024-00853-0] | 1-gen-2025 | Atzeni, EleonoraPriarone, Paolo C.Salmi, Alessandro | Progress Additive Manufacturing 10 (2025) 4689-4703.pdf |
| CMT deposition of stainless steel: effects of process parameters on energy demand and microstructure / Catalano, A. R.; Tebaldo, V.; Priarone, P. C.; Settineri, L.; Faga, M. G.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9520. - 10:9(2025), pp. 6993-7013. [10.1007/s40964-025-01022-7] | 1-gen-2025 | Catalano A. R.Tebaldo V.Priarone P. C.Settineri L.Faga M. G. | 2025, Progress Additive Manufacturing 10 (2025) 6993-7013.pdf |
| Conceptualisation of a multimodal, non-intrusive, generative AI-based assistive system for assembly / Simeone, A.; Fan, Y.; Antonelli, D.; Priarone, P. C.; Settineri, L.. - In: CIRP ANNALS. - ISSN 0007-8506. - (2025). [10.1016/j.cirp.2025.04.061] | 1-gen-2025 | Simeone A.Fan Y.Antonelli D.Priarone P. C.Settineri L. | 1-s2.0-S0007850625001088-main.pdf |
| Development of a repair strategy for a thin aerospace component with dot-by-dot deposition approach / Campatelli, G.; Carvalho, G. H. S. F. L.; Priarone, P. C.. - 57:(2025), pp. 639-646. ( 17th Italian Manufacturing Association Conference, AITeM 2025 Bari, Italy September 10-12, 2025) [10.21741/9781644903735-75]. | 1-gen-2025 | Priarone P. C. + | - |
| Development of an AI-based informational assistance system for assembly accounting for dyslexia / Fan, Yuchen; Simeone, Alessandro; Antonelli, Dario; Caggiano, Alessandra; Priarone, Paolo C.; Settineri, Luca. - In: JOURNAL OF INTELLIGENT MANUFACTURING. - ISSN 0956-5515. - (2025). [10.1007/s10845-025-02624-2] | 1-gen-2025 | Yuchen FanAlessandro SimeoneDario AntonelliPaolo C. PriaroneLuca Settineri + | s10845-025-02624-2.pdf |
| Electric or internal combustion vehicles? A Life Cycle Assessment in São Paulo / Maselli, Michele; Pelegrina, Juliano; Marotti De Mello, Adriana; Ribeiro Souza, João Valsecchi; Marx, Roberto; Priarone, Paolo C.. - In: RENEWABLE & SUSTAINABLE ENERGY REVIEWS. - ISSN 1364-0321. - STAMPA. - 212:(2025), pp. 1-13. [10.1016/j.rser.2025.115431] | 1-gen-2025 | Priarone, Paolo C. + | Renew Sust Energy Reviews 212 (2025) 115431_Submitted.pdf; 1-s2.0-S1364032125001042-main.pdf |
| Evaluating the use of scrap metal to produce Al-5Cu-3Ti-1Cr-1Fe alloy powder for laser powder bed fusion / Monti, Chiara; Gobber, Federico Simone; Turani, Matteo; Papis, Konrad; Priarone, Paolo C.; Actis Grande, Marco; Bambach, Markus. - In: SUSTAINABLE MATERIALS AND TECHNOLOGIES. - ISSN 2214-9937. - ELETTRONICO. - 45:(2025), pp. 1-13. [10.1016/j.susmat.2025.e01606] | 1-gen-2025 | Gobber, Federico SimonePriarone, Paolo C.Actis Grande, Marco + | Evaluating the use of scrap metal to produce Al-5Cu-3Ti-1Cr-1Fe alloy.pdf |
| From Waste To Feedstock: Feasibility Of Recycling AA5183 Alloy Chips Into Powders For Additive Manufacturing / Gobber, Federico Simone; Priarone, Paolo C.; Pennacchio, Antonio; Actis Grande, Marco. - ELETTRONICO. - (2025), pp. 1-7. ( 2025 Euro Powder Metallurgy Congress and Exhibition, Euro PM 2025 SEC (Scottish Event Campus) Center, gbr 2025) [10.59499/ep256764726]. | 1-gen-2025 | Gobber, Federico SimonePriarone, Paolo C.Pennacchio, AntonioActis Grande, Marco | - |
| Machining of Critical Aerospace Components: Challenges and Case Studies / Grossi, Niccolò; Albertelli, Paolo; Bertolini, Rachele; Caggiano, Alessandra; Campatelli, Gianni; Cragnolini, Matteo; Maurizio, Andrea Lelio; Nele, Luigi; Priarone, Paolo C.; Scippa, Antonio; Sortino, Marco; Totis, Giovanni; Turchetta, Sandro (LECTURE NOTES IN MECHANICAL ENGINEERING). - In: Lecture Notes in Mechanical EngineeringSTAMPA. - [s.l] : Springer Science and Business Media Deutschland GmbH, 2025. - ISBN 9783031995002. - pp. 217-260 [10.1007/978-3-031-99501-9_12] | 1-gen-2025 | Priarone, Paolo C. + | Lecture Notes MEng (2025) 217-260.pdf |
| SEAform’s Modular Floating Platforms: A Comprehensive Environmental Impact Evaluation / Pincetti, Letizia; Sirigu, Sergej A.; Rosiello, Alice; Chicco, Carola; Viotti, Fabio; Priarone, Paolo C.. - STAMPA. - 597:(2025), pp. 783-792. ( 4th World Conference on Floating Structures, WCFS 2024 Hong Kong (PRC) 2–4 December 2024) [10.1007/978-981-96-4569-5_82]. | 1-gen-2025 | Pincetti, LetiziaSirigu, Sergej A.Rosiello, AliceChicco, CarolaViotti, FabioPriarone, Paolo C. | Proceedings WCFS 2024 (2025) 783-792.pdf |
| A methodology to assess social sustainability of multi-tier supply chains in the textile industry / Olivero, Francesco; Tuni, Andrea; Priarone, Paolo C.; Morandi, Fabiana; Bassani, Giorgia. - (2024). ( 14th EDSI Annual Conference Venezia (Italia) 3 - 5 Giugno 2024). | 1-gen-2024 | Olivero, FrancescoTuni, AndreaPriarone, Paolo C. + | - |
| An Approach To Evaluate Quality And Sustainability For Powders Produced By A Lab – Scale Atomizer / Simone Gobber, Federico; Pennacchio, Antonio; Actis Grande, Marco; Priarone, Paolo. - (2024). ( 2024 European Powder Metallurgy Congress and Exhibition, Euro PM 2024 Malmö (Sweden) 29 Sep -2 Oct 2024) [10.59499/ep246282648]. | 1-gen-2024 | Simone Gobber, FedericoPennacchio, AntonioActis Grande, MarcoPriarone, Paolo | EP246282648.pdf |
| An economic evaluation of hybrid WAAM-subtractive manufacturing in relation to deposition process parameters / Catalano, Angioletta R.; Priarone, Paolo C.; Settineri, Luca. - 122:(2024), pp. 49-54. ( 31st CIRP Conference on Life Cycle Engineering (LCE 2024) Torino (IT) June, 19-21 2024) [10.1016/j.procir.2024.02.003]. | 1-gen-2024 | Catalano, Angioletta R.Priarone, Paolo C.Settineri, Luca | An-economic-evaluation-of-hybrid-WAAM-subtractive-manufacturing_2024_Procedi.pdf |
| Blended learning in the engineering field: A systematic literature review / Sala, Roberto; Maffei, Antonio; Pirola, Fabiana; Enoksson, Fredrik; Ljubić, Sandi; Skoki, Arian; Zammit, Joseph P.; Bonello, Amberlynn; Podržaj, Primož; Žužek, Tena; Priarone, Paolo C.; Antonelli, Dario; Pezzotta, Giuditta. - In: COMPUTER APPLICATIONS IN ENGINEERING EDUCATION. - ISSN 1061-3773. - (2024). [10.1002/cae.22712] | 1-gen-2024 | Priarone, Paolo C.Antonelli, Dario + | Comp Applic In Engineering - 2024 - Sala - Blended learning in the engineering field A systematic literature review.pdf |