Archivio Istituzionale della RicercaMINETOLA, PAOLO
MINETOLA, PAOLO
Dipartimento di Ingegneria Gestionale e della Produzione
012994
A Multibody Modeling Approach Applied to the Redesign for Additive Manufacturing of a Load Bearing Structure
2025 Sorli, Davide; Minetola, Paolo; Mauro, Stefano
Assessment of simulation software for predicting induced distortions in laser-beam powder bed fusion of Ti6Al4V
2025 Giubilini, Alberto; Calignano, Flaviana; Galati, Manuela; Minetola, Paolo
Characterization and Finite Element Analyses of Tensile and Bending Behavior of Nylon Reinforced with Continuous Carbon Fiber Produced by Additive Manufacturing
2025 Galati, M.; Minetola, P.; Rizza, G.
Evaluating Self-Produced PLA Filament for Sustainable 3D Printing: Mechanical Properties and Energy Consumption Compared to Commercial Alternatives
2025 Fontana, Luca; Minetola, Paolo; Khandpur, Mankirat Singh; Giubilini, Alberto
Exploring printing methods for continuous natural fiber-reinforced thermoplastic biocomposites: A comparative study
2025 dos Santos, Natália V.; Giubilini, Alberto; Cardoso, Daniel Carlos T.; Minetola, Paolo
High‐Pressure Homogenization: An Industrially Scalable Method for Producing PHBH Powders for Selective Laser Sintering
2025 Giubilini, Alberto; Colucci, Giovanna; Grasselli, Silvia; Iuliano, Luca; Messori, Massimo; Minetola, Paolo
Study of flow-induced crystallization in polyvinylidene fluoride 3D printing
2025 Lannunziata, Erika; Fiorillo, Chiara; Minetola, Paolo; Edeleva, Mariya; Cardon, Ludwig; Iuliano, Luca
Towards sustainable additive manufacturing of continuous natural yarn-reinforced thermoplastic biocomposites: a review
2025 Dos Santos, Natália V.; Giubilini, Alberto; Minetola, Paolo; Iuliano, Luca; Banea, Mariana D.; Cardoso, Daniel Carlos T.
A preliminary study on multi‐material fused filament fabrication of an embedded strain gauge for low‐cost real‐time monitoring of part strain
2024 Minetola, Paolo; Giubilini, Alberto
Effect of annealing treatment and infill percentage on 3D-printed PEEK samples by Fused Filament Fabrication
2024 Lannunziata, Erika; Colucci, Giovanna; Minetola, Paolo; Giubilini, Alberto
On the modelling of the specific energy consumption for the continuous fibre fabrication of composite materials
2024 Lunetto, Vincenzo; Galati, Manuela; Minetola, Paolo; Priarone, Paolo C.
On the Use of Green and Blue Laser Sources for Powder Bed Fusion: State of the Art Review for Additive Manufacturing of Copper and Its Alloys
2024 Khandpur, Mankirat Singh; Giubilini, Alberto; Iuliano, Luca; Minetola, Paolo
3D-Printed Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-Cellulose-Based Scaffolds for Biomedical Applications
2023 Giubilini, Alberto; Messori, Massimo; Bondioli, Federica; Minetola, Paolo; Iuliano, Luca; Nyström, Gustav; Maniura-Weber, Katharina; Rottmar, Markus; Siqueira, Gilberto
Enamel Analysis by 3D Scanning after Three Orthodontic Clean-Up Procedures: An In-Vitro Test of a New Piezoelectric Tool
2023 Nardi, Gianna Maria; Mazur, Marta; Grassi, Roberta; Rifuggiato, Serena; Stiuso, Vito; Janiszewska-Olszowska, Joanna; Ottolenghi, Livia; Barbato, Ersilia; Minetola, Paolo; Iuliano, Luca
Multimaterial 3D printing of auxetic jounce bumpers for automotive suspensions
2023 Giubilini, Alberto; Minetola, Paolo
Novel 3D printable bio-based and biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) microspheres for selective laser sintering applications
2023 Giubilini, A.; Colucci, G.; De Trane, Giorgio; Lupone, F.; Badini, C.; Minetola, P.; Bondioli, F.; Messori, M.
A structured comparison of decentralized additive manufacturing centers based on quality and sustainability
2022 Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Catalano, Angioletta R.; Priarone, Paolo C.
Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses
2022 Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo
Toward a sustainable educational engineer archetype through Industry 4.0
2022 Lupi, Francesco; Mabkhot, Mohammed M.; Finžgar, Miha; Minetola, Paolo; Stadnicka, Dorota; Maffei, Antonio; Litwin, Paweł; Boffa, Eleonora; Ferreira, Pedro; Podržaj, Primož; Chelli, Riccardo; Lohse, Niels; Lanzetta, Michele
A Finite Element approach for the prediction of the mechanical behaviour of layered composites produced by Continuous Filament Fabrication ({CFF})
2021 Galati, Manuela; Viccica, Marco; Minetola, Paolo
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| A Multibody Modeling Approach Applied to the Redesign for Additive Manufacturing of a Load Bearing Structure / Sorli, Davide; Minetola, Paolo; Mauro, Stefano. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 15:17(2025), pp. 1-23. [10.3390/app15179312] | 1-gen-2025 | Sorli, DavideMinetola, PaoloMauro, Stefano | applsci-15-09312.pdf |
| Assessment of simulation software for predicting induced distortions in laser-beam powder bed fusion of Ti6Al4V / Giubilini, Alberto; Calignano, Flaviana; Galati, Manuela; Minetola, Paolo. - In: THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 1433-3015. - ELETTRONICO. - 138:(2025), pp. 1039-1054. [10.1007/s00170-025-15576-x] | 1-gen-2025 | Giubilini, AlbertoCalignano, FlavianaGalati, ManuelaMinetola, Paolo | 2025_Assessment of simulation software for predicting induced distortions in laser‑beam powder bed fusion of Ti6Al4V.pdf |
| Characterization and Finite Element Analyses of Tensile and Bending Behavior of Nylon Reinforced with Continuous Carbon Fiber Produced by Additive Manufacturing / Galati, M.; Minetola, P.; Rizza, G.. - In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. - ISSN 1544-1024. - ELETTRONICO. - (2025). [10.1007/s11665-025-11934-8] | 1-gen-2025 | Galati M.Minetola P.Rizza G. | s11665-025-11934-8 (1).pdf |
| Evaluating Self-Produced PLA Filament for Sustainable 3D Printing: Mechanical Properties and Energy Consumption Compared to Commercial Alternatives / Fontana, Luca; Minetola, Paolo; Khandpur, Mankirat Singh; Giubilini, Alberto. - In: JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING. - ISSN 2504-4494. - ELETTRONICO. - 9:6(2025), pp. 1-24. [10.3390/jmmp9060172] | 1-gen-2025 | Fontana, LucaMinetola, PaoloKhandpur, Mankirat SinghGiubilini, Alberto | jmmp-09-00172.pdf |
| Exploring printing methods for continuous natural fiber-reinforced thermoplastic biocomposites: A comparative study / dos Santos, Natália V.; Giubilini, Alberto; Cardoso, Daniel Carlos T.; Minetola, Paolo. - In: SUSTAINABLE MATERIALS AND TECHNOLOGIES. - ISSN 2214-9937. - ELETTRONICO. - 43:(2025). [10.1016/j.susmat.2025.e01253] | 1-gen-2025 | Giubilini, AlbertoMinetola, Paolo + | 2025_Exploring+printing+methods+for+continuous+natural+fiber+reinforced+thermoplastic+biocomposites+A+comparative+study_compressed.pdf |
| High‐Pressure Homogenization: An Industrially Scalable Method for Producing PHBH Powders for Selective Laser Sintering / Giubilini, Alberto; Colucci, Giovanna; Grasselli, Silvia; Iuliano, Luca; Messori, Massimo; Minetola, Paolo. - In: ADVANCED MATERIALS TECHNOLOGIES. - ISSN 2365-709X. - ELETTRONICO. - 10:17(2025), pp. 1-14. [10.1002/admt.202500049] | 1-gen-2025 | Giubilini, AlbertoColucci, GiovannaIuliano, LucaMessori, MassimoMinetola, Paolo + | 2025_High-Pressure Homogenization An Industrially Scalable Method for Producing PHBH Powders for Selective Laser Sintering.pdf |
| Study of flow-induced crystallization in polyvinylidene fluoride 3D printing / Lannunziata, Erika; Fiorillo, Chiara; Minetola, Paolo; Edeleva, Mariya; Cardon, Ludwig; Iuliano, Luca. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2025), pp. 1-13. [10.1007/s00170-025-15139-0] | 1-gen-2025 | Lannunziata, ErikaMinetola, PaoloIuliano, Luca + | s00170-025-15139-0.pdf |
| Towards sustainable additive manufacturing of continuous natural yarn-reinforced thermoplastic biocomposites: a review / Dos Santos, Natália V.; Giubilini, Alberto; Minetola, Paolo; Iuliano, Luca; Banea, Mariana D.; Cardoso, Daniel Carlos T.. - In: CELLULOSE. - ISSN 1572-882X. - ELETTRONICO. - (2025), pp. 1-31. [10.1007/s10570-025-06594-9] | 1-gen-2025 | Giubilini, AlbertoMinetola, PaoloIuliano, Luca + | s10570-025-06594-9.pdf |
| A preliminary study on multi‐material fused filament fabrication of an embedded strain gauge for low‐cost real‐time monitoring of part strain / Minetola, Paolo; Giubilini, Alberto. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9520. - ELETTRONICO. - 9:6(2024), pp. 2273-2290. [10.1007/s40964-024-00582-4] | 1-gen-2024 | Minetola, PaoloGiubilini, Alberto | 2024_ A preliminary study on multi‐material fused filament fabrication of an embedded strain gauge for low‐cost real‐time monitoring of part strain.pdf |
| Effect of annealing treatment and infill percentage on 3D-printed PEEK samples by Fused Filament Fabrication / Lannunziata, Erika; Colucci, Giovanna; Minetola, Paolo; Giubilini, Alberto. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - 131:(2024), pp. 5209-5222. [10.1007/s00170-024-13347-8] | 1-gen-2024 | Lannunziata, ErikaColucci, GiovannaMinetola, PaoloGiubilini, Alberto | s00170-024-13347-8.pdf |
| On the modelling of the specific energy consumption for the continuous fibre fabrication of composite materials / Lunetto, Vincenzo; Galati, Manuela; Minetola, Paolo; Priarone, Paolo C.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - ELETTRONICO. - (2024). [10.1007/s40964-024-00900-w] | 1-gen-2024 | Lunetto, VincenzoGalati, ManuelaMinetola, PaoloPriarone, Paolo C. | Paper online.pdf; Accepted version.pdf |
| On the Use of Green and Blue Laser Sources for Powder Bed Fusion: State of the Art Review for Additive Manufacturing of Copper and Its Alloys / Khandpur, Mankirat Singh; Giubilini, Alberto; Iuliano, Luca; Minetola, Paolo. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 14:12(2024). [10.3390/met14121464] | 1-gen-2024 | Khandpur, Mankirat SinghGiubilini, AlbertoIuliano, LucaMinetola, Paolo | 2024_On the Use of Green and Blue Laser Sources for Powder Bed Fusion State of the Art Review for Additive Manufacturing of Copper and Its Alloys.pdf |
| 3D-Printed Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-Cellulose-Based Scaffolds for Biomedical Applications / Giubilini, Alberto; Messori, Massimo; Bondioli, Federica; Minetola, Paolo; Iuliano, Luca; Nyström, Gustav; Maniura-Weber, Katharina; Rottmar, Markus; Siqueira, Gilberto. - In: BIOMACROMOLECULES. - ISSN 1525-7797. - ELETTRONICO. - (2023). [10.1021/acs.biomac.3c00263] | 1-gen-2023 | Giubilini, AlbertoMessori, MassimoBondioli, FedericaMinetola, PaoloIuliano, Luca + | acs.biomac.3c00263.pdf |
| Enamel Analysis by 3D Scanning after Three Orthodontic Clean-Up Procedures: An In-Vitro Test of a New Piezoelectric Tool / Nardi, Gianna Maria; Mazur, Marta; Grassi, Roberta; Rifuggiato, Serena; Stiuso, Vito; Janiszewska-Olszowska, Joanna; Ottolenghi, Livia; Barbato, Ersilia; Minetola, Paolo; Iuliano, Luca. - In: INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH. - ISSN 1660-4601. - ELETTRONICO. - 20:3(2023), pp. 1-14. [10.3390/ijerph20032516] | 1-gen-2023 | Rifuggiato, SerenaStiuso, VitoMinetola, PaoloIuliano, Luca + | ijerph-20-02516.pdf |
| Multimaterial 3D printing of auxetic jounce bumpers for automotive suspensions / Giubilini, Alberto; Minetola, Paolo. - In: RAPID PROTOTYPING JOURNAL. - ISSN 1355-2546. - 29:11(2023), pp. 131-142. [10.1108/RPJ-02-2023-0066] | 1-gen-2023 | Giubilini, AlbertoMinetola, Paolo | 2023_Multimaterial 3D printing of auxetic jounce bumpers for automotive suspensions.pdf |
| Novel 3D printable bio-based and biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) microspheres for selective laser sintering applications / Giubilini, A.; Colucci, G.; De Trane, Giorgio; Lupone, F.; Badini, C.; Minetola, P.; Bondioli, F.; Messori, M.. - In: MATERIALS TODAY SUSTAINABILITY. - ISSN 2589-2347. - ELETTRONICO. - 22:(2023), pp. 1-9. [10.1016/j.mtsust.2023.100379] | 1-gen-2023 | Giubilini, A.Colucci, G.Lupone, F.Badini, C.Minetola, P.Bondioli, F.Messori, M. + | 2023 - PHBH microspheres for SLS.pdf |
| A structured comparison of decentralized additive manufacturing centers based on quality and sustainability / Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Catalano, Angioletta R.; Priarone, Paolo C.. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - 121:1-2(2022), pp. 993-1014. [10.1007/s00170-022-09288-9] | 1-gen-2022 | Maisano, Domenico A.Verna, ElisaMinetola, PaoloLunetto, VincenzoCatalano, Angioletta R.Priarone, Paolo C. | IJAMT_Maisano2022_Article_AStructuredComparisonOfDecentr.pdf |
| Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses / Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 14:17(2022), pp. 1-19. [10.3390/polym14173530] | 1-gen-2022 | Fontana, LucaGiubilini, AlbertoArrigo, RossellaMalucelli, GiulioMinetola, Paolo | polymers-14-03530-v3.pdf |
| Toward a sustainable educational engineer archetype through Industry 4.0 / Lupi, Francesco; Mabkhot, Mohammed M.; Finžgar, Miha; Minetola, Paolo; Stadnicka, Dorota; Maffei, Antonio; Litwin, Paweł; Boffa, Eleonora; Ferreira, Pedro; Podržaj, Primož; Chelli, Riccardo; Lohse, Niels; Lanzetta, Michele. - In: COMPUTERS IN INDUSTRY. - ISSN 0166-3615. - ELETTRONICO. - 134:(2022), pp. 1-16. [https://doi.org/10.1016/j.compind.2021.103543] | 1-gen-2022 | Minetola, PaoloBoffa, Eleonora + | 2021 - Engineer Archetype I4.0.pdf |
| A Finite Element approach for the prediction of the mechanical behaviour of layered composites produced by Continuous Filament Fabrication ({CFF}) / Galati, Manuela; Viccica, Marco; Minetola, Paolo. - In: POLYMER TESTING. - ISSN 0142-9418. - ELETTRONICO. - 98:(2021), p. 107181. [10.1016/j.polymertesting.2021.107181] | 1-gen-2021 | Manuela GalatiMarco ViccicaPaolo Minetola | 1-s2.0-S0142941821001318-main.pdf |