BASSINI, EMILIO
BASSINI, EMILIO
Dipartimento Scienza Applicata e Tecnologia
034478
Effect of Astroloy powder characteristics on mechanical properties of Powder-HIP components
2024 Galech, U.; Aristizabal, M.; Iturriza, I.; Bassini, E.; Sivo, A.; Ugues, D.
Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure
2024 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
Rapid L-PBF printing of IN718 coupled with HIP-quench: A novel approach to manufacture and heat treatment of a nickel-based alloy
2024 Lerda, S.; Bassini, E.; Marchese, G.; Biamino, S.; Ugues, D.
The effect of hot isostatic pressing pressure level and solution annealing cooling rate on CM247 LC nickel-based superalloy processed by laser-based powder bed fusion
2024 Martelli, P. A.; Bassini, E.; Ugues, D.
The effect of temperature and strain rate on the grain boundary sliding in a CM247 LC Ni-based superalloy processed with laser based powder bed fusion
2024 Martelli, P. A.; Sabirov, I.; Monclus, M. A.; Bassini, E.; Marchese, G.; Ugues, D.
Definition of an optimal solutioning treatment for a Ni-based superalloy processed by Additive Manufacturing
2023 Martelli, P. A.; Kenevisi, M. S.; Bassini, E.; Ugues, D.
Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition
2023 Martucci, Alessandra; Bassini, Emilio; Lombardi, Mariangela
Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M
2023 Martucci, Alessandra; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela
Iron Diffusion in Electron Beam Melt (EBM) γ-TiAl Based Alloy from the Building Platform: Interface Characterization
2023 Kenevisi, Mohammad Saleh; Ghibaudo, Cristian; Bassini, Emilio; Ugues, Daniele; Marchese, Giulio; Biamino, Sara
Microstructure and heat treatment investigation of Inconel 625/TiC composite produced by Laser Powder Bed Fusion
2023 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
Microstructure of TiAl Capsules Processed by Electron Beam Powder Bed Fusion Followed by Post-Hot Isostatic Pressing
2023 Bakhshifarkoush, Hanieh; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Biamino, Sara
Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF)
2023 Martelli, PIETRO ANTONIO; Sivo, Antonio; Calignano, Flaviana; Bassini, Emilio; Biamino, Sara; Ugues, Daniele
Rapid L-PBF Printing Of IN718 Coupled With HIP-Quench: A Faster Approach To Combine Manufacturing And Heat Treatment In A Nickel-Based Alloy
2023 Bassini, Emilio; A. Martelli, Pietro; Lerda, Serena; Marchese, Giulio; Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio; Biamino, Sara; Ugues, Daniele
Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion
2023 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
An investigation on the effect of different multi-step heat treatments on the microstructure, texture and mechanical properties of the DED-produced Ti-6Al-4V alloy
2022 Carrozza, Alessandro; Aversa, Alberta; Mazzucato, Federico; Bassini, Emilio; Manfredi, Diego; Biamino, Sara; Valente, Anna; Fino, Paolo
Effect of Aging and Cooling Path on the Super β-Transus Heat-Treated Ti-6Al-4V Alloy Produced via Electron Beam Melting (EBM)
2022 Carrozza, Alessandro; Marchese, Giulio; Saboori, Abdollah; Bassini, Emilio; Aversa, Alberta; Bondioli, Federica; Ugues, Daniele; Biamino, Sara; Fino, Paolo
Effect of Cold Rolling on Microstructural and Mechanical Properties of a Dual-Phase Steel for Automotive Field
2022 Bassini, Emilio; Marchese, Giulio; Sivo, Antonio; Martelli, Pietro Antonio; Gullino, Alessio; Ugues, Daniele
Effect of the particle size distribution on physical properties, composition, and quality of gas atomized Astroloy powders for HIP application
2022 Bassini, E.; Galech, U.; Soria, T.; Aristizabal, M.; Iturriza, I.; Biamino, S.; Ugues, D.
Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via Laser Powder Bed Fusion (LPBF)
2022 Bassini, E.; Sivo, A.; Martelli, P. A.; Rajczak, E.; Marchese, G.; Calignano, F; Biamino, S.; Ugues, D.
Hardness Evolution of Solution-Annealed LPBFed Inconel 625 Alloy under Prolonged Thermal Exposure
2022 Marinucci, Fabrizio; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Fino, Paolo; Ugues, Daniele; Biamino, Sara
Citazione | Data di pubblicazione | Autori | File |
---|---|---|---|
Effect of Astroloy powder characteristics on mechanical properties of Powder-HIP components / Galech, U.; Aristizabal, M.; Iturriza, I.; Bassini, E.; Sivo, A.; Ugues, D.. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 900:(2024). [10.1016/j.msea.2024.146472] | 1-gen-2024 | Bassini, E.Sivo, A.Ugues, D. + | 1-s2.0-S0921509324004039-main.pdf |
Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure / Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 17:(2024). [10.3390/ma17184532] | 1-gen-2024 | Serena LerdaGiulio MarcheseEmilio BassiniMariangela LombardiDaniele UguesPaolo FinoSara Biamino | materials-17-04532.pdf |
Rapid L-PBF printing of IN718 coupled with HIP-quench: A novel approach to manufacture and heat treatment of a nickel-based alloy / Lerda, S.; Bassini, E.; Marchese, G.; Biamino, S.; Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 30:(2024), pp. 6983-6994. [10.1016/j.jmrt.2024.05.128] | 1-gen-2024 | Lerda, S.Bassini, E.Marchese, G.Biamino, S.Ugues, D. | 1-s2.0-S2238785424011682-main.pdf |
The effect of hot isostatic pressing pressure level and solution annealing cooling rate on CM247 LC nickel-based superalloy processed by laser-based powder bed fusion / Martelli, P. A.; Bassini, E.; Ugues, D.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - (2024). [10.1007/s40964-024-00645-6] | 1-gen-2024 | Martelli, P. A.Bassini, E.Ugues, D. | s40964-024-00645-6.pdf |
The effect of temperature and strain rate on the grain boundary sliding in a CM247 LC Ni-based superalloy processed with laser based powder bed fusion / Martelli, P. A.; Sabirov, I.; Monclus, M. A.; Bassini, E.; Marchese, G.; Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 28:January–February 2024(2024), pp. 2466-2477. [10.1016/j.jmrt.2023.12.131] | 1-gen-2024 | Martelli, P. A.Bassini, E.Marchese, G.Ugues, D. + | JMRT-D-23-09825_R1.pdf; 1-s2.0-S2238785423031952-main.pdf |
Definition of an optimal solutioning treatment for a Ni-based superalloy processed by Additive Manufacturing / Martelli, P. A.; Kenevisi, M. S.; Bassini, E.; Ugues, D.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - 114:7-8(2023), pp. 28-33. | 1-gen-2023 | Martelli P. A.Kenevisi M. S.Bassini E.Ugues D. | La Metallurgia.pdf |
Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition / Martucci, Alessandra; Bassini, Emilio; Lombardi, Mariangela. - In: METALS. - ISSN 2075-4701. - 13:7(2023). [10.3390/met13071315] | 1-gen-2023 | Alessandra MartucciEmilio BassiniMariangela Lombardi | metals-13-01315-v2.pdf |
Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M / Martucci, Alessandra; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 13:4(2023). [10.3390/met13040796] | 1-gen-2023 | Alessandra MartucciGiulio MarcheseEmilio BassiniMariangela Lombardi | metals-13-00796+(5)_compressed.pdf |
Iron Diffusion in Electron Beam Melt (EBM) γ-TiAl Based Alloy from the Building Platform: Interface Characterization / Kenevisi, Mohammad Saleh; Ghibaudo, Cristian; Bassini, Emilio; Ugues, Daniele; Marchese, Giulio; Biamino, Sara. - In: METALS. - ISSN 2075-4701. - 13:4(2023), pp. 1-12. [10.3390/met13040772] | 1-gen-2023 | Kenevisi, Mohammad SalehGhibaudo, CristianBassini, EmilioUgues, DanieleMarchese, GiulioBiamino, Sara | metals-13-00772.pdf |
Microstructure and heat treatment investigation of Inconel 625/TiC composite produced by Laser Powder Bed Fusion / Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara. - ELETTRONICO. - (2023). (Intervento presentato al convegno Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023 tenutosi a Lisbon (Portugal) nel 1-4 October 2023) [10.59499/EP235765271]. | 1-gen-2023 | Serena LerdaGiulio MarcheseEmilio BassiniMariangela LombardiDaniele UguesPaolo FinoSara Biamino | 5765271.pdf |
Microstructure of TiAl Capsules Processed by Electron Beam Powder Bed Fusion Followed by Post-Hot Isostatic Pressing / Bakhshifarkoush, Hanieh; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Biamino, Sara. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 16:16(2023). [10.3390/ma16165510] | 1-gen-2023 | Hanieh BakhshiFarkoushGiulio MarcheseEmilio BassiniAlberta AversaSara Biamino | materials-16-05510-v2.pdf |
Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF) / Martelli, PIETRO ANTONIO; Sivo, Antonio; Calignano, Flaviana; Bassini, Emilio; Biamino, Sara; Ugues, Daniele. - In: METALS. - ISSN 2075-4701. - 13:2(2023), p. 210. [10.3390/met13020210] | 1-gen-2023 | Pietro Antonio MartelliAntonio SivoFlaviana CalignanoEmilio BassiniSara BiaminoDaniele Ugues | metals-13-00210-v2(1)_compressed(1).pdf |
Rapid L-PBF Printing Of IN718 Coupled With HIP-Quench: A Faster Approach To Combine Manufacturing And Heat Treatment In A Nickel-Based Alloy / Bassini, Emilio; A. Martelli, Pietro; Lerda, Serena; Marchese, Giulio; Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio; Biamino, Sara; Ugues, Daniele. - (2023). (Intervento presentato al convegno Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023 tenutosi a Lisbon (Portugal) nel 1-4 October 2023) [10.59499/ep235763076]. | 1-gen-2023 | Bassini, EmilioLerda, SerenaMarchese, GiulioMaculotti, GiacomoGenta, GianfrancoGaletto, MaurizioBiamino, SaraUgues, Daniele + | 2023_Bassini_EPM conference.pdf |
Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion / Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 883:(2023). [10.1016/j.msea.2023.145508] | 1-gen-2023 | Lerda, SerenaMarchese,GiulioBassini, EmilioLombardi, MariangelaUgues, DanieleFino, PaoloBiamino, Sara | Manuscript_Understanding the microstructure and mechanical performance of heat-treated Inconel 625-TiC composite produced by laser powder bed fusion.pdf; 1-s2.0-S0921509323009322-main.pdf |
An investigation on the effect of different multi-step heat treatments on the microstructure, texture and mechanical properties of the DED-produced Ti-6Al-4V alloy / Carrozza, Alessandro; Aversa, Alberta; Mazzucato, Federico; Bassini, Emilio; Manfredi, Diego; Biamino, Sara; Valente, Anna; Fino, Paolo. - In: MATERIALS CHARACTERIZATION. - ISSN 1044-5803. - ELETTRONICO. - 189:(2022), p. 111958. [10.1016/j.matchar.2022.111958] | 1-gen-2022 | Aversa, AlbertaBassini, EmilioManfredi, DiegoBiamino, SaraFino, Paolo + | 1-s2.0-S1044580322002406-main.pdf |
Effect of Aging and Cooling Path on the Super β-Transus Heat-Treated Ti-6Al-4V Alloy Produced via Electron Beam Melting (EBM) / Carrozza, Alessandro; Marchese, Giulio; Saboori, Abdollah; Bassini, Emilio; Aversa, Alberta; Bondioli, Federica; Ugues, Daniele; Biamino, Sara; Fino, Paolo. - In: MATERIALS. - ISSN 1996-1944. - 15:12(2022), p. 4067. [10.3390/ma15124067] | 1-gen-2022 | Carrozza, AlessandroMarchese, GiulioSaboori, AbdollahBassini, EmilioAversa, AlbertaBondioli, FedericaUgues, DanieleBiamino, SaraFino, Paolo | materials-15-04067 (2).pdf |
Effect of Cold Rolling on Microstructural and Mechanical Properties of a Dual-Phase Steel for Automotive Field / Bassini, Emilio; Marchese, Giulio; Sivo, Antonio; Martelli, Pietro Antonio; Gullino, Alessio; Ugues, Daniele. - In: MATERIALS. - ISSN 1996-1944. - 15:21(2022), pp. 7482-7501. [10.3390/ma15217482] | 1-gen-2022 | Bassini, EmilioMarchese, GiulioSivo, AntonioMartelli, Pietro AntonioGullino, AlessioUgues, Daniele | materials-15-07482.pdf |
Effect of the particle size distribution on physical properties, composition, and quality of gas atomized Astroloy powders for HIP application / Bassini, E.; Galech, U.; Soria, T.; Aristizabal, M.; Iturriza, I.; Biamino, S.; Ugues, D.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - ELETTRONICO. - 890:(2022), p. 161631. [10.1016/j.jallcom.2021.161631] | 1-gen-2022 | Bassini, E.Biamino, S.Ugues, D. + | pagination_JALCOM_161631.pdf; pdfresizer.com-pdf-resize.pdf |
Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via Laser Powder Bed Fusion (LPBF) / Bassini, E.; Sivo, A.; Martelli, P. A.; Rajczak, E.; Marchese, G.; Calignano, F; Biamino, S.; Ugues, D.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - ELETTRONICO. - (2022), p. 164213. [10.1016/j.jallcom.2022.164213] | 1-gen-2022 | Bassini, E.Sivo, A.Martelli, P. A.Rajczak, E.Marchese, G.Calignano, FBiamino, S.Ugues, D. | pagination_JALCOM_164213.pdf; 1-s2.0-S0925838822006041-main.pdf |
Hardness Evolution of Solution-Annealed LPBFed Inconel 625 Alloy under Prolonged Thermal Exposure / Marinucci, Fabrizio; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Fino, Paolo; Ugues, Daniele; Biamino, Sara. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 12:11(2022), p. 1916. [10.3390/met12111916] | 1-gen-2022 | Marinucci, FabrizioMarchese, GiulioBassini, EmilioAversa, AlbertaFino, PaoloUgues, DanieleBiamino, Sara | metals-12-01916.pdf |