Archivio Istituzionale della RicercaBASSINI, EMILIO
BASSINI, EMILIO
Dipartimento Scienza Applicata e Tecnologia
034478
A review on near net shape hot isostatic pressing of metallic materials: For industrial applications
2026 Anwar, Jehanzaib; Bassini, Emilio; Fino, Paolo; Lombardi, Mariangela; Bondioli, Federica; Aristizabal, Miren; Iturriza, Inigo Zubillaga; Biamino, Sara; Ugues, Daniele
Evolution of microstructure and mechanical properties as a consequence of tensile creep strain of NNS-HIPped nickel-based superalloy
2026 Anwar, Jehanzaib; Bassini, Emilio; Marchese, Giulio; Biamino, Sara; Ugues, Daniele
Hot isostatic pressing as a tool for enhancing the diffusion bonding of dissimilar materials using interference fitting as pre-joining technique
2026 Bassini, Emilio; Tringali, Nino; Ugues, Daniele
Effect of single-step hot isostatic pressing & solution treatment on the microstructure of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion
2025 Barode, J.; Bassini, E.; Aversa, A.; D'Isanto, F.; Ugues, D.; Biamino, S.; Lombardi, M.; Fino, P.
On the high-temperature tensile deformation mechanisms of the IN738LC superalloy fabricated by laser powder bed fusion
2025 Hafezi, Mohammad; Kermanpur, Ahmad; Rezaeian, Ahmad; Heydari, Fatemeh; Rabieifar, Hossein; Marchese, Giulio; Bassini, Emilio; Ugues, Daniele; Biamino, Sara
The effect of hot isostatic pressing pressure level and solution annealing cooling rate on CM247 LC nickel-based superalloy processed by laser-based powder bed fusion
2025 Martelli, P. A.; Bassini, E.; Ugues, D.
Effect of Astroloy powder characteristics on mechanical properties of Powder-HIP components
2024 Galech, U.; Aristizabal, M.; Iturriza, I.; Bassini, E.; Sivo, A.; Ugues, D.
Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure
2024 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
Rapid L-PBF printing of IN718 coupled with HIP-quench: A novel approach to manufacture and heat treatment of a nickel-based alloy
2024 Lerda, S.; Bassini, E.; Marchese, G.; Biamino, S.; Ugues, D.
The effect of solution annealing on additively manufactured and hot isostatically pressed René 80 Ni-based superalloy
2024 Kenevisi, M. S.; Martelli, P. A.; Titonel, I.; Bassini, E.; Marchese, G.; Ugues, D.
The effect of temperature and strain rate on the grain boundary sliding in a CM247 LC Ni-based superalloy processed with laser based powder bed fusion
2024 Martelli, P. A.; Sabirov, I.; Monclus, M. A.; Bassini, E.; Marchese, G.; Ugues, D.
Definition of an optimal solutioning treatment for a Ni-based superalloy processed by Additive Manufacturing
2023 Martelli, P. A.; Kenevisi, M. S.; Bassini, E.; Ugues, D.
Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition
2023 Martucci, Alessandra; Bassini, Emilio; Lombardi, Mariangela
Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M
2023 Martucci, Alessandra; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela
Iron Diffusion in Electron Beam Melt (EBM) γ-TiAl Based Alloy from the Building Platform: Interface Characterization
2023 Kenevisi, Mohammad Saleh; Ghibaudo, Cristian; Bassini, Emilio; Ugues, Daniele; Marchese, Giulio; Biamino, Sara
Microstructure and heat treatment investigation of Inconel 625/TiC composite produced by Laser Powder Bed Fusion
2023 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
Microstructure of TiAl Capsules Processed by Electron Beam Powder Bed Fusion Followed by Post-Hot Isostatic Pressing
2023 Bakhshifarkoush, Hanieh; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Biamino, Sara
Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF)
2023 Martelli, PIETRO ANTONIO; Sivo, Antonio; Calignano, Flaviana; Bassini, Emilio; Biamino, Sara; Ugues, Daniele
Rapid L-PBF Printing Of IN718 Coupled With HIP-Quench: A Faster Approach To Combine Manufacturing And Heat Treatment In A Nickel-Based Alloy
2023 Bassini, Emilio; A. Martelli, Pietro; Lerda, Serena; Marchese, Giulio; Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio; Biamino, Sara; Ugues, Daniele
Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion
2023 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| A review on near net shape hot isostatic pressing of metallic materials: For industrial applications / Anwar, J., Bassini, E., Fino, P., Lombardi, M., Bondioli, F., Aristizabal, M., Iturriza, I.Z., Biamino, S., Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 42:(2026), pp. 3663-3684. [10.1016/j.jmrt.2026.03.210] | 1-gen-2026 | Anwar, JehanzaibBassini, EmilioFino, PaoloLombardi, MariangelaBondioli, FedericaBiamino, SaraUgues, Daniele + | Review.pdf |
| Evolution of microstructure and mechanical properties as a consequence of tensile creep strain of NNS-HIPped nickel-based superalloy / Anwar, J., Bassini, E., Marchese, G., Biamino, S., Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 42:(2026), pp. 2826-2837. [10.1016/j.jmrt.2026.03.239] | 1-gen-2026 | Anwar, JehanzaibBassini, EmilioMarchese, GiulioBiamino, SaraUgues, Daniele | Astroloy.pdf |
| Hot isostatic pressing as a tool for enhancing the diffusion bonding of dissimilar materials using interference fitting as pre-joining technique / Bassini, E., Tringali, N., Ugues, D.. - In: POWDER METALLURGY. - ISSN 0032-5899. - ELETTRONICO. - (2026), pp. 1-6. [10.1177/00325899261430114] | 1-gen-2026 | Bassini, EmilioTringali, NinoUgues, Daniele | HIP_2025_diffusion bonding.pdf; bassini-et-al-2026-hot-isostatic-pressing-as-a-tool-for-enhancing-the-diffusion-bonding-of-dissimilar-materials-using.pdf |
| Effect of single-step hot isostatic pressing & solution treatment on the microstructure of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion / Barode, J., Bassini, E., Aversa, A., D'Isanto, F., Ugues, D., Biamino, S., Lombardi, M., Fino, P.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - 1036:(2025). [10.1016/j.jallcom.2025.181817] | 1-gen-2025 | Barode, J.Bassini, E.Aversa, A.D'Isanto, F.Ugues, D.Biamino, S.Lombardi, M.Fino, P. | 1-s2.0-S092583882503378X-main.pdf |
| On the high-temperature tensile deformation mechanisms of the IN738LC superalloy fabricated by laser powder bed fusion / Hafezi, M., Kermanpur, A., Rezaeian, A., Heydari, F., Rabieifar, H., Marchese, G., Bassini, E., Ugues, D., Biamino, S.. - In: MATERIALS CHARACTERIZATION. - ISSN 1044-5803. - 229:(2025). [10.1016/j.matchar.2025.115510] | 1-gen-2025 | Marchese, GiulioBassini, EmilioUgues, DanieleBiamino, Sara + | 1-s2.0-S1044580325007995-main.pdf |
| The effect of hot isostatic pressing pressure level and solution annealing cooling rate on CM247 LC nickel-based superalloy processed by laser-based powder bed fusion / Martelli, P.A., Bassini, E., Ugues, D.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - 10:1(2025), pp. 605-618. [10.1007/s40964-024-00645-6] | 1-gen-2025 | Martelli, P. A.Bassini, E.Ugues, D. | s40964-024-00645-6.pdf |
| Effect of Astroloy powder characteristics on mechanical properties of Powder-HIP components / Galech, U., Aristizabal, M., Iturriza, I., Bassini, E., Sivo, A., Ugues, D.. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 900:(2024). [10.1016/j.msea.2024.146472] | 1-gen-2024 | Bassini, E.Sivo, A.Ugues, D. + | 1-s2.0-S0921509324004039-main.pdf |
| Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure / Lerda, S., Marchese, G., Bassini, E., Lombardi, M., Ugues, D., Fino, P., Biamino, S.. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 17:18(2024). [10.3390/ma17184532] | 1-gen-2024 | Serena LerdaGiulio MarcheseEmilio BassiniMariangela LombardiDaniele UguesPaolo FinoSara Biamino | materials-17-04532.pdf |
| Rapid L-PBF printing of IN718 coupled with HIP-quench: A novel approach to manufacture and heat treatment of a nickel-based alloy / Lerda, S., Bassini, E., Marchese, G., Biamino, S., Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 30:(2024), pp. 6983-6994. [10.1016/j.jmrt.2024.05.128] | 1-gen-2024 | Lerda, S.Bassini, E.Marchese, G.Biamino, S.Ugues, D. | 1-s2.0-S2238785424011682-main.pdf |
| The effect of solution annealing on additively manufactured and hot isostatically pressed René 80 Ni-based superalloy / Kenevisi, M.S., Martelli, P.A., Titonel, I., Bassini, E., Marchese, G., Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 33:(2024), pp. 6591-6600. [10.1016/j.jmrt.2024.11.003] | 1-gen-2024 | Kenevisi, M. S.Martelli, P. A.Titonel, I.Bassini, E.Marchese, G.Ugues, D. | Final version.pdf |
| The effect of temperature and strain rate on the grain boundary sliding in a CM247 LC Ni-based superalloy processed with laser based powder bed fusion / Martelli, P.A., Sabirov, I., Monclus, M.A., Bassini, E., Marchese, G., Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 28:January–February 2024(2024), pp. 2466-2477. [10.1016/j.jmrt.2023.12.131] | 1-gen-2024 | Martelli, P. A.Bassini, E.Marchese, G.Ugues, D. + | JMRT-D-23-09825_R1.pdf; 1-s2.0-S2238785423031952-main.pdf |
| Definition of an optimal solutioning treatment for a Ni-based superalloy processed by Additive Manufacturing / Martelli, P.A., Kenevisi, M.S., Bassini, E., Ugues, D.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - 114:7-8(2023), pp. 28-33. | 1-gen-2023 | Martelli P. A.Kenevisi M. S.Bassini E.Ugues D. | La Metallurgia.pdf |
| Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition / Martucci, A., Bassini, E., Lombardi, M.. - In: METALS. - ISSN 2075-4701. - 13:7(2023). [10.3390/met13071315] | 1-gen-2023 | Alessandra MartucciEmilio BassiniMariangela Lombardi | metals-13-01315-v2.pdf |
| Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M / Martucci, A., Marchese, G., Bassini, E., Lombardi, M.. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 13:4(2023). [10.3390/met13040796] | 1-gen-2023 | Alessandra MartucciGiulio MarcheseEmilio BassiniMariangela Lombardi | metals-13-00796+(5)_compressed.pdf |
| Iron Diffusion in Electron Beam Melt (EBM) γ-TiAl Based Alloy from the Building Platform: Interface Characterization / Kenevisi, M.S., Ghibaudo, C., Bassini, E., Ugues, D., Marchese, G., Biamino, S.. - In: METALS. - ISSN 2075-4701. - 13:4(2023), pp. 1-12. [10.3390/met13040772] | 1-gen-2023 | Kenevisi, Mohammad SalehGhibaudo, CristianBassini, EmilioUgues, DanieleMarchese, GiulioBiamino, Sara | metals-13-00772.pdf |
| Microstructure and heat treatment investigation of Inconel 625/TiC composite produced by Laser Powder Bed Fusion / Lerda, S., Marchese, G., Bassini, E., Lombardi, M., Ugues, D., Fino, P., Biamino, S.. - ELETTRONICO. - (2023). (Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023 Lisbon (Portugal) 1-4 October 2023) [10.59499/EP235765271]. | 1-gen-2023 | Serena LerdaGiulio MarcheseEmilio BassiniMariangela LombardiDaniele UguesPaolo FinoSara Biamino | 5765271.pdf |
| Microstructure of TiAl Capsules Processed by Electron Beam Powder Bed Fusion Followed by Post-Hot Isostatic Pressing / Bakhshifarkoush, H., Marchese, G., Bassini, E., Aversa, A., Biamino, S.. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 16:16(2023). [10.3390/ma16165510] | 1-gen-2023 | Hanieh BakhshiFarkoushGiulio MarcheseEmilio BassiniAlberta AversaSara Biamino | materials-16-05510-v2.pdf |
| Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF) / Martelli, P.A., Sivo, A., Calignano, F., Bassini, E., Biamino, S., Ugues, D.. - In: METALS. - ISSN 2075-4701. - 13:2(2023), p. 210. [10.3390/met13020210] | 1-gen-2023 | Pietro Antonio MartelliAntonio SivoFlaviana CalignanoEmilio BassiniSara BiaminoDaniele Ugues | metals-13-00210-v2(1)_compressed(1).pdf |
| Rapid L-PBF Printing Of IN718 Coupled With HIP-Quench: A Faster Approach To Combine Manufacturing And Heat Treatment In A Nickel-Based Alloy / Bassini, E., A. Martelli, P., Lerda, S., Marchese, G., Maculotti, G., Genta, G., Galetto, M., Biamino, S., Ugues, D.. - (2023). (Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023 Lisbon (Portugal) 1-4 October 2023) [10.59499/ep235763076]. | 1-gen-2023 | Bassini, EmilioLerda, SerenaMarchese, GiulioMaculotti, GiacomoGenta, GianfrancoGaletto, MaurizioBiamino, SaraUgues, Daniele + | 2023_Bassini_EPM conference.pdf |
| Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion / Lerda, S., Marchese, G., Bassini, E., Lombardi, M., Ugues, D., Fino, P., Biamino, S.. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 883:(2023). [10.1016/j.msea.2023.145508] | 1-gen-2023 | Lerda, SerenaMarchese,GiulioBassini, EmilioLombardi, MariangelaUgues, DanieleFino, PaoloBiamino, Sara | Manuscript_Understanding the microstructure and mechanical performance of heat-treated Inconel 625-TiC composite produced by laser powder bed fusion.pdf; 1-s2.0-S0921509323009322-main.pdf |