MACULOTTI, GIACOMO
MACULOTTI, GIACOMO
Dipartimento di Ingegneria Gestionale e della Produzione
038917
A methodology for task-specific metrological characterization of low-cost 3D camera for face analysis
2022 Maculotti, G.; Ulrich, L.; Olivetti, E. C.; Genta, G.; Marcolin, F.; Vezzetti, E.; Galetto, M.
Advanced Methods for the Mechanical and Topographical Characterization of Technological Surfaces
2021 Maculotti, Giacomo
Analysis of residual plastic deformation of blanked sheets out of automotive aluminium alloys through hardness map
2021 Maculotti, G; Bonù, S; Bonù, L; Cagliero, R; Genta, G; Marchiandi, G; Galetto, M
Assessment of heat treatment effect on AlSi10Mg by selective laser melting through indentation testing
2019 Maculotti, G.; Genta, G.; Lorusso, M.; Galetto, M.
Build orientation effect on Ti6Al4V thin-wall topography by electron beam powder bed fusion
2022 Maculotti, G.; Piscopo, G.; Marchiandi, G.; Atzeni, E.; Salmi, A.; Iuliano, L.
Calibration of machine platform nonlinearity in Instrumented Indentation Test in the macro range
2023 Kholkhujaev, J.; Maculotti, G.; Genta, G.; Galetto, M.
Comparison of calibration methods for nano-indentation testing machines
2019 Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
Criticalities of iterative calibration procedures for indentation testing machines in the nano-range
2020 Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
Defect Probability Estimation for Hardness-Optimised Parts by Selective Laser Melting
2020 Galetto, Maurizio; Genta, Gianfranco; Maculotti, Giacomo; Verna, Elisa
Effect of contact stiffness and machine calibration in nano-indentation testing
2018 Genta, Gianfranco; Maculotti, Giacomo; Barbato, Giulio; Levi, Raffaello; Galetto, Maurizio
Effect of track geometry on the measurement uncertainty of wear in pin-on-disc tribological test
2021 Maculotti, G.; Goti, E.; Genta, G.; Marchiandi, G.; Mura, A.; Mazza, L.; Galetto, M.
Gaussian process regression‐based detection and correction of disturbances in surface topography measurements
2021 Maculotti, Giacomo; Genta, Gianfranco; Quagliotti, Danilo; Galetto, Maurizio; Hansen, Hans N.
Grinding performance and theoretical analysis for a high volume fraction SiCp/Al composite
2022 Gu, P.; Zhu, C.; Mura, A.; Maculotti, G.; Goti, E.
Inference on errors in industrial parts: Kriging and variogram versus geometrical product specifications standard
2021 Maculotti, G.; Pistone, G.; Vicario, G.
Instrumented Indentation Test in the Nano‑range: Performances Comparison of Testing Machines Calibration Methods
2019 Galetto, Maurizio; Maculotti, Giacomo; Genta, Gianfranco; Barbato, Giulio; Levi, Raffaello
Instrumented indentation test: Contact stiffness evaluation in the nano-range
2018 Maculotti, Giacomo; Genta, Gianfranco; Lorusso, Massimo; Pavese, Matteo; Ugues, Daniele; Galetto, Maurizio
Instrumented Indentation Test: Contact Stiffness Evaluation in the Nano‑range
2019 Maculotti, Giacomo; Genta, Gianfranco; Lorusso, Massimo; Pavese, Matteo; Ugues, Daniele; Galetto, Maurizio
Measurement noise evaluation, noise bandwidth specification and temperature effects in 3D point autofocusing microscopy
2018 Maculotti, Giacomo; Feng, Xiaobing; Galetto, Maurizio; Leach, Richard
Measurement noise of a point autofocus surface topography instrument
2017 Xiaobing, Feng; Quagliotti, Danilo; Maculotti, Giacomo; Syam, Wahyudin P.; Guido, Tosello; Hansen, Hans N.; Galetto, Maurizio; Richard, Leach
Minimization of defects generation in laser welding process of steel alloy for automotive application
2022 Maculotti, G.; Genta, G.; Verna, E.; Bonu, S.; Bonu, L.; Cagliero, R.; Galetto, M.
Citazione | Data di pubblicazione | Autori | File |
---|---|---|---|
A methodology for task-specific metrological characterization of low-cost 3D camera for face analysis / Maculotti, G.; Ulrich, L.; Olivetti, E. C.; Genta, G.; Marcolin, F.; Vezzetti, E.; Galetto, M.. - In: MEASUREMENT. - ISSN 0263-2241. - 200:(2022), p. 111643. [10.1016/j.measurement.2022.111643] | 1-gen-2022 | Maculotti G.Ulrich L.Olivetti E. C.Genta G.Marcolin F.Vezzetti E.Galetto M. | 2022_Maculotti_Measurement_uncertainty_facial_camera.pdf |
Advanced Methods for the Mechanical and Topographical Characterization of Technological Surfaces / Maculotti, Giacomo. - (2021 Mar 19), pp. 1-212. | 19-mar-2021 | MACULOTTI, GIACOMO | tesi_phd_maculotti_final.pdf; Abstract_phd_maculotti_final.pdf |
Analysis of residual plastic deformation of blanked sheets out of automotive aluminium alloys through hardness map / Maculotti, G; Bonù, S; Bonù, L; Cagliero, R; Genta, G; Marchiandi, G; Galetto, M. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - 1193:1(2021), p. 012102. [10.1088/1757-899X/1193/1/012102] | 1-gen-2021 | Maculotti, GGenta, GMarchiandi, GGaletto, M + | 2021_Maculotti_et_al_IOP_Conf._Ser.__Mater._Sci._Eng._Blanking_HV.pdf |
Assessment of heat treatment effect on AlSi10Mg by selective laser melting through indentation testing / Maculotti, G.; Genta, G.; Lorusso, M.; Galetto, M. (KEY ENGINEERING MATERIALS). - In: Surface Modification Technologies / Antonello Astarita, T.S. Sudarshan, Antonino Squillace and Pierpaolo Carlone. - Zurich : Trans Tech Publications Ltd, 2019. - ISBN 978-303571525-5. - pp. 171-177 [10.4028/www.scientific.net/KEM.813.171] | 1-gen-2019 | Maculotti G.Genta G.Lorusso M.Galetto M. | - |
Build orientation effect on Ti6Al4V thin-wall topography by electron beam powder bed fusion / Maculotti, G.; Piscopo, G.; Marchiandi, G.; Atzeni, E.; Salmi, A.; Iuliano, L.. - ELETTRONICO. - 108:(2022), pp. 222-227. ((Intervento presentato al convegno 6th CIRP Conference on Surface Integrity tenutosi a Lione nel 8-10/6/2022 [10.1016/j.procir.2022.03.039]. | 1-gen-2022 | MacUlotti G.Piscopo G.Marchiandi G.Atzeni E.Salmi A.Iuliano L. | 2022_Maculotti_et_al_EBM_orientation_CIRP_CSI.pdf |
Calibration of machine platform nonlinearity in Instrumented Indentation Test in the macro range / Kholkhujaev, J.; Maculotti, G.; Genta, G.; Galetto, M.. - In: PRECISION ENGINEERING. - ISSN 0141-6359. - 81:(2023), pp. 145-157. [10.1016/j.precisioneng.2023.02.005] | 1-gen-2023 | Kholkhujaev J.Maculotti G.Genta G.Galetto M. | - |
Comparison of calibration methods for nano-indentation testing machines / Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio. - ELETTRONICO. - (2019), pp. 1-10. ((Intervento presentato al convegno XIV Convegno dell'Associazione Italiana Tecnologie Manifatturiere tenutosi a Padova nel 9-11 Settembre 2019. | 1-gen-2019 | Giacomo MaculottiGianfranco GentaMaurizio Galetto | - |
Criticalities of iterative calibration procedures for indentation testing machines in the nano-range / Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio. - ELETTRONICO. - (2020). ((Intervento presentato al convegno 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020. | 1-gen-2020 | Giacomo MaculottiGianfranco GentaMaurizio Galetto | ExtendedAbstract_ICE20146_0309010529.pdf |
Defect Probability Estimation for Hardness-Optimised Parts by Selective Laser Melting / Galetto, Maurizio; Genta, Gianfranco; Maculotti, Giacomo; Verna, Elisa. - In: INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING. - ISSN 2234-7593. - 21:9(2020), pp. 1739-1753. [10.1007/s12541-020-00381-1] | 1-gen-2020 | Galetto, MaurizioGenta, GianfrancoMaculotti, GiacomoVerna, Elisa | Galetto2020_Article_DefectProbabilityEstimationSLM_IJPEM.pdf; Manuscript_JPEM-D-20-00129_versione finale.pdf |
Effect of contact stiffness and machine calibration in nano-indentation testing / Genta, Gianfranco; Maculotti, Giacomo; Barbato, Giulio; Levi, Raffaello; Galetto, Maurizio. - ELETTRONICO. - 78:(2018), pp. 208-212. ((Intervento presentato al convegno 6th CIRP Global Web Conference “Envisaging the future manufacturing, design, technologies and systems in innovation era” tenutosi a Shantou (Cina) nel 23-25 ottobre 2018 [10.1016/j.procir.2018.08.313]. | 1-gen-2018 | Gianfranco GentaGiacomo MaculottiGiulio BarbatoRaffaello LeviMaurizio Galetto | - |
Effect of track geometry on the measurement uncertainty of wear in pin-on-disc tribological test / Maculotti, G.; Goti, E.; Genta, G.; Marchiandi, G.; Mura, A.; Mazza, L.; Galetto, M.. - ELETTRONICO. - (2021), pp. 293-296. ((Intervento presentato al convegno 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021 nel 2021. | 1-gen-2021 | Maculotti G.Goti E.Genta G.Marchiandi G.Mura A.Mazza L.Galetto M. | 2021_Maculotti_Euspen2021.pdf |
Gaussian process regression‐based detection and correction of disturbances in surface topography measurements / Maculotti, Giacomo; Genta, Gianfranco; Quagliotti, Danilo; Galetto, Maurizio; Hansen, Hans N.. - In: QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL. - ISSN 0748-8017. - (2021). [10.1002/qre.2980] | 1-gen-2021 | Giacomo MaculottiGianfranco GentaMaurizio Galetto + | 2021_Maculotti_et_al_QREI_GPR_disturbances_topography.pdf |
Grinding performance and theoretical analysis for a high volume fraction SiCp/Al composite / Gu, P.; Zhu, C.; Mura, A.; Maculotti, G.; Goti, E.. - In: JOURNAL OF MANUFACTURING PROCESSES. - ISSN 1526-6125. - ELETTRONICO. - 76:(2022), pp. 796-811. [10.1016/j.jmapro.2022.02.051] | 1-gen-2022 | Mura A.Maculotti G.Goti E. + | 2022_Gu_SiCpAl_performances.pdf |
Inference on errors in industrial parts: Kriging and variogram versus geometrical product specifications standard / Maculotti, G.; Pistone, G.; Vicario, G.. - In: APPLIED STOCHASTIC MODELS IN BUSINESS AND INDUSTRY. - ISSN 1524-1904. - ELETTRONICO. - (2021). [10.1002/asmb.2603] | 1-gen-2021 | Maculotti G.Vicario G. + | 2021_Maculotti_Kriging_ASMBI.pdf; ASMB-20-191.R2.pdf |
Instrumented Indentation Test in the Nano‑range: Performances Comparison of Testing Machines Calibration Methods / Galetto, Maurizio; Maculotti, Giacomo; Genta, Gianfranco; Barbato, Giulio; Levi, Raffaello. - In: NANOMANUFACTURING AND METROLOGY. - ISSN 2520-8128. - STAMPA. - 2:2(2019), pp. 91-99. [10.1007/s41871-019-00035-5] | 1-gen-2019 | Maurizio GalettoGiacomo MaculottiGianfranco GentaGiulio BarbatoRaffaello Levi | - |
Instrumented indentation test: Contact stiffness evaluation in the nano-range / Maculotti, Giacomo; Genta, Gianfranco; Lorusso, Massimo; Pavese, Matteo; Ugues, Daniele; Galetto, Maurizio. - ELETTRONICO. - (2018), pp. 675-682. ((Intervento presentato al convegno 6th International Conference on nanoManufacturing tenutosi a London (UK) nel 4-6 July 2018. | 1-gen-2018 | Giacomo MaculottiGianfranco GentaMassimo LorussoMatteo PaveseDaniele UguesMaurizio Galetto | - |
Instrumented Indentation Test: Contact Stiffness Evaluation in the Nano‑range / Maculotti, Giacomo; Genta, Gianfranco; Lorusso, Massimo; Pavese, Matteo; Ugues, Daniele; Galetto, Maurizio. - In: NANOMANUFACTURING AND METROLOGY. - ISSN 2520-8128. - STAMPA. - 2:1(2019), pp. 16-25. [10.1007/s41871-018-0030-y] | 1-gen-2019 | Giacomo MaculottiGianfranco GentaMassimo LorussoMatteo PaveseDaniele UguesMaurizio Galetto | - |
Measurement noise evaluation, noise bandwidth specification and temperature effects in 3D point autofocusing microscopy / Maculotti, Giacomo; Feng, Xiaobing; Galetto, Maurizio; Leach, Richard. - ELETTRONICO. - (2018), pp. 155-156. ((Intervento presentato al convegno 18th international conference of the european society for precision engineering and nanotechnology tenutosi a Venezia (ITA) nel 4-8 June 2018. | 1-gen-2018 | Giacomo MaculottiMaurizio Galetto + | ExtendedAbstract_ICE18156_1218093830.pdf |
Measurement noise of a point autofocus surface topography instrument / Xiaobing, Feng; Quagliotti, Danilo; Maculotti, Giacomo; Syam, Wahyudin P.; Guido, Tosello; Hansen, Hans N.; Galetto, Maurizio; Richard, Leach. - STAMPA. - (2017). ((Intervento presentato al convegno 2017 International Conference on Metrology and Properties of Engineering Surfaces tenutosi a Göteborg (Sweden) nel June 26-29 2017. | 1-gen-2017 | QUAGLIOTTI, DANILOMACULOTTI, GIACOMOMaurizio Galetto + | - |
Minimization of defects generation in laser welding process of steel alloy for automotive application / Maculotti, G.; Genta, G.; Verna, E.; Bonu, S.; Bonu, L.; Cagliero, R.; Galetto, M.. - 115:(2022), pp. 48-53. ((Intervento presentato al convegno 10th CIRP Global Web Conference on Material Aspects of Manufacturing Processes tenutosi a swe nel 2022 [10.1016/j.procir.2022.10.048]. | 1-gen-2022 | Maculotti G.Genta G.Verna E.Cagliero R.Galetto M. + | - |