Archivio Istituzionale della RicercaATZENI, ELEONORA
ATZENI, ELEONORA
Dipartimento di Ingegneria Gestionale e della Produzione
011319
An exploratory analysis on laser polishing of components by laser powder directed energy deposition
In corso di stampa Vecchi, Giuseppe; Piscopo, Gabriele; Atzeni, Eleonora; Salmi, Alessandro
Evaluation of Porosity in AISI 316L Samples Processed by Laser Powder Directed Energy Deposition
2024 Salmi, Alessandro; Piscopo, Gabriele; Pilagatti, Adriano Nicola; Atzeni, Eleonora
Fabrication and evaluation of freeform surfaces in Directed Energy Deposition
2024 Pilagatti, ADRIANO NICOLA; Valenza, Federica; Vecchi, Giuseppe; Atzeni, Eleonora; Salmi, Alessandro; Iuliano, Luca
Heat-Treated Inconel 625 by Laser Powder Bed Fusion: Microstructure, Tensile Properties, and Residual Stress Evolution
2024 Marchese, Giulio; Piscopo, Gabriele; Lerda, Serena; Salmi, Alessandro; Atzeni, Eleonora; Biamino, Sara
Investigation of dimensional and geometrical tolerances of laser powder directed energy deposition process
2024 Piscopo, G.; Salmi, A.; Atzeni, E.
Mitigation of Residual Stress and Distortion of AlSi10Mg Parts Produced by Laser Powder Bed Fusion through a Proper Selection of Support Geometry
2024 Piscopo, G.; Atzeni, E.; Salmi, A.
Process window development of DED-LB/M process with coaxial wire for stainless steel AISI 316L
2024 Stavropoulos, Panagiotis; Bikas, Harry; Tzimanis, Konstantinos; Porevopoulos, Nikos; Pilagatti, ADRIANO NICOLA; Atzeni, Eleonora; Iuliano, Luca; Salmi, Alessandro
Tuning Process Parameters to Control the Porosity of Parts Produced with Directed Energy Deposition
2024 Piscopo, G.; Atzeni, E.; Iuliano, L.; Salmi, A.
A grey-box model of laser-powder directed energy deposition for complex scanning strategy
2023 Poggi, Mirna; Atzeni, Eleonora; De Chirico, Michele; Salmi, Alessandro
Abrasive fluidized bed finishing of additive manufactured cobalt-chrome parts: effects on surface morphology and fatigue behavior
2023 Atzeni, Eleonora; Genna, Silvio; Salmi, Alessandro; Trovalusci, Federica; Rubino, Gianluca
An Overview of the Process Mechanisms in the Laser Powder Directed Energy Deposition
2023 Piscopo, G.; Atzeni, E.; Saboori, A.; Salmi, A.
Experimental Investigation on the Cutting of Additively Manufactured Ti6Al4V with Wire-EDM and the Analytical Modelling of Cutting Speed and Surface Roughness
2023 Galati, M.; Antonioni, P.; Calignano, F.; Atzeni, E.
Exploiting the generative design potential to select the best conceptual design of an aerospace component to be produced by additive manufacturing
2023 Pilagatti, Adriano Nicola; Atzeni, Eleonora; Salmi, Alessandro
Prosthesis customization in maxillofacial surgery by means of Additive Manufacturing
2023 Vecchi, Giuseppe; Atzeni, Eleonora; Salmi, Alessandro; Iuliano, Luca
The role of the carrier gas flow in directed energy deposition
2023 Pilagatti, ADRIANO NICOLA; Atzeni, Eleonora; Iuliano, Luca; Salmi, Alessandro
A comparative study of dry and cryogenic milling for Directed Energy Deposited IN718 components: effect on process and part quality
2022 Souflas, T.; Bikas, H.; Ghassempouri, M.; Salmi, A.; Atzeni, E.; Saboori, A.; Brugnetti, I.; Valente, A.; Mazzucato, F.; Stavropoulos, P.
Build orientation effect on Ti6Al4V thin-wall topography by electron beam powder bed fusion
2022 Maculotti, G.; Piscopo, G.; Marchiandi, G.; Atzeni, E.; Salmi, A.; Iuliano, L.
Effect of process parameters on AISI 316L single tracks by laser powder directed energy deposition
2022 Poggi, Mirna; Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca
Study on the machinability of Ti6Al4V parts produced by electron beam powder bed fusion
2022 Valenza, Federica; Atzeni, Eleonora; Iuliano, Luca; Saboori, Abdollah; Salmi, Alessandro
Thermo-mechanical modelling of the Directed Energy Deposition (DED) process for the optimization of deposi-tion strategies
2022 Vallone, Marco; Damasio, Massimo; Atzeni, Eleonora; Poggi, Mirna; Salmi, Alessandro
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| An exploratory analysis on laser polishing of components by laser powder directed energy deposition / Vecchi, Giuseppe; Piscopo, Gabriele; Atzeni, Eleonora; Salmi, Alessandro. - ELETTRONICO. - (In corso di stampa). (Intervento presentato al convegno 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering tenutosi a Ischia nel 11-14 Luglio 2023). | In corso di stampa | Giuseppe VecchiGabriele PiscopoEleonora AtzeniAlessandro Salmi | - |
| Evaluation of Porosity in AISI 316L Samples Processed by Laser Powder Directed Energy Deposition / Salmi, Alessandro; Piscopo, Gabriele; Pilagatti, Adriano Nicola; Atzeni, Eleonora. - In: JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING. - ISSN 2504-4494. - 8:(2024). [10.3390/jmmp8040129] | 1-gen-2024 | Salmi, AlessandroPiscopo, GabrielePilagatti, Adriano NicolaAtzeni, Eleonora | jmmp-08-00129+(1)_compressed_compressed.pdf |
| Fabrication and evaluation of freeform surfaces in Directed Energy Deposition / Pilagatti, ADRIANO NICOLA; Valenza, Federica; Vecchi, Giuseppe; Atzeni, Eleonora; Salmi, Alessandro; Iuliano, Luca. - ELETTRONICO. - (2024). (Intervento presentato al convegno 24th International Conference of the European Society for Precision Engineering and Nanotechnology). | 1-gen-2024 | Adriano Nicola PilagattiFederica ValenzaGiuseppe VecchiEleonora AtzeniAlessandro SalmiLuca Iuliano | ICE24239_0308055224.pdf |
| Heat-Treated Inconel 625 by Laser Powder Bed Fusion: Microstructure, Tensile Properties, and Residual Stress Evolution / Marchese, Giulio; Piscopo, Gabriele; Lerda, Serena; Salmi, Alessandro; Atzeni, Eleonora; Biamino, Sara. - In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. - ISSN 1059-9495. - (2024). [10.1007/s11665-024-09235-7] | 1-gen-2024 | Marchese, GiulioPiscopo, GabrieleLerda, SerenaSalmi, AlessandroAtzeni, EleonoraBiamino, Sara | s11665-024-09235-7.pdf |
| Investigation of dimensional and geometrical tolerances of laser powder directed energy deposition process / Piscopo, G.; Salmi, A.; Atzeni, E.. - In: PRECISION ENGINEERING. - ISSN 0141-6359. - 85:(2024), pp. 217-225. [10.1016/j.precisioneng.2023.10.006] | 1-gen-2024 | Piscopo G.Salmi A.Atzeni E. | 1-s2.0-S0141635923001897-main.pdf |
| Mitigation of Residual Stress and Distortion of AlSi10Mg Parts Produced by Laser Powder Bed Fusion through a Proper Selection of Support Geometry / Piscopo, G.; Atzeni, E.; Salmi, A.. - In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. - ISSN 1059-9495. - 33:8(2024), pp. 3978-3985. [10.1007/s11665-023-09108-5] | 1-gen-2024 | Piscopo G.Atzeni E.Salmi A. | s11665-023-09108-5.pdf |
| Process window development of DED-LB/M process with coaxial wire for stainless steel AISI 316L / Stavropoulos, Panagiotis; Bikas, Harry; Tzimanis, Konstantinos; Porevopoulos, Nikos; Pilagatti, ADRIANO NICOLA; Atzeni, Eleonora; Iuliano, Luca; Salmi, Alessandro. - In: INTERNATIONAL JOURNAL OF EXPERIMENTAL DESIGN AND PROCESS OPTIMISATION. - ISSN 2040-2260. - ELETTRONICO. - (2024). [10.1504/IJEDPO.2024.10063465] | 1-gen-2024 | Adriano Nicola PilagattiEleonora AtzeniLuca IulianoAlessandro Salmi + | stavropoulos-et-al-2024-process-window-development-of-ded-lb-m-process-with-coaxial-wire-for-stainless-steel-aisi-316l.pdf |
| Tuning Process Parameters to Control the Porosity of Parts Produced with Directed Energy Deposition / Piscopo, G.; Atzeni, E.; Iuliano, L.; Salmi, A.. - (2024), pp. 434-443. (Intervento presentato al convegno 32nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023 tenutosi a prt nel 2023) [10.1007/978-3-031-38241-3_49]. | 1-gen-2024 | Piscopo G.Atzeni E.Iuliano L.Salmi A. | - |
| A grey-box model of laser-powder directed energy deposition for complex scanning strategy / Poggi, Mirna; Atzeni, Eleonora; De Chirico, Michele; Salmi, Alessandro. - In: METALS. - ISSN 2075-4701. - (2023). [10.3390/met13101763] | 1-gen-2023 | Mirna PoggiEleonora AtzeniAlessandro Salmi + | metals-13-01763.pdf |
| Abrasive fluidized bed finishing of additive manufactured cobalt-chrome parts: effects on surface morphology and fatigue behavior / Atzeni, Eleonora; Genna, Silvio; Salmi, Alessandro; Trovalusci, Federica; Rubino, Gianluca. - In: THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 1433-3015. - ELETTRONICO. - 124:5-6(2023), pp. 1939-1949. [10.1007/s00170-022-10580-x] | 1-gen-2023 | Eleonora AtzeniAlessandro Salmi + | d4a9a07d-d5a5-4667-9adf-29eeca80f609.pdf; LPBF_CoCr_AFB-Fatigue_Manuscript.pdf |
| An Overview of the Process Mechanisms in the Laser Powder Directed Energy Deposition / Piscopo, G.; Atzeni, E.; Saboori, A.; Salmi, A.. - In: APPLIED SCIENCES. - ISSN 2076-3417. - 13:1(2023). [10.3390/app13010117] | 1-gen-2023 | Piscopo G.Atzeni E.Saboori A.Salmi A. | applsci-13-00117_compressed-1.pdf |
| Experimental Investigation on the Cutting of Additively Manufactured Ti6Al4V with Wire-EDM and the Analytical Modelling of Cutting Speed and Surface Roughness / Galati, M.; Antonioni, P.; Calignano, F.; Atzeni, E.. - In: JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING. - ISSN 2504-4494. - ELETTRONICO. - 7:2(2023), pp. 69-87. [10.3390/jmmp7020069] | 1-gen-2023 | Galati M.Antonioni P.Calignano F.Atzeni E. | jmmp-07-00069.pdf |
| Exploiting the generative design potential to select the best conceptual design of an aerospace component to be produced by additive manufacturing / Pilagatti, Adriano Nicola; Atzeni, Eleonora; Salmi, Alessandro. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - 126:(2023), pp. 5597-5612. [10.1007/s00170-023-11259-7] | 1-gen-2023 | Pilagatti, Adriano NicolaAtzeni, EleonoraSalmi, Alessandro | s00170-023-11259-7.pdf |
| Prosthesis customization in maxillofacial surgery by means of Additive Manufacturing / Vecchi, Giuseppe; Atzeni, Eleonora; Salmi, Alessandro; Iuliano, Luca. - (2023). (Intervento presentato al convegno 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering). | 1-gen-2023 | Giuseppe VecchiEleonora AtzeniAlessandro SalmiLuca Iuliano | 1-s2.0-S221282712300361X-main.pdf |
| The role of the carrier gas flow in directed energy deposition / Pilagatti, ADRIANO NICOLA; Atzeni, Eleonora; Iuliano, Luca; Salmi, Alessandro. - ELETTRONICO. - (2023), pp. 1258-1269. (Intervento presentato al convegno 10th ECCOMAS Thematic Conference on Smart Structures and Materials, SMART 2023 tenutosi a Patras (GRE)) [10.7712/150123.9873.444102]. | 1-gen-2023 | Adriano Nicola PilagattiEleonora AtzeniLuca IulianoAlessandro Salmi | SM23_444102.pdf |
| A comparative study of dry and cryogenic milling for Directed Energy Deposited IN718 components: effect on process and part quality / Souflas, T.; Bikas, H.; Ghassempouri, M.; Salmi, A.; Atzeni, E.; Saboori, A.; Brugnetti, I.; Valente, A.; Mazzucato, F.; Stavropoulos, P.. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - 119:1-2(2022), pp. 745-758. [10.1007/s00170-021-08313-7] | 1-gen-2022 | Salmi A.Atzeni E.Saboori A. + | Souflas2022_Article_AComparativeStudyOfDryAndCryog.pdf |
| Build orientation effect on Ti6Al4V thin-wall topography by electron beam powder bed fusion / Maculotti, G.; Piscopo, G.; Marchiandi, G.; Atzeni, E.; Salmi, A.; Iuliano, L.. - ELETTRONICO. - 108:(2022), pp. 222-227. (Intervento presentato al convegno 6th CIRP Conference on Surface Integrity tenutosi a Lione nel 8-10/6/2022) [10.1016/j.procir.2022.03.039]. | 1-gen-2022 | MacUlotti G.Piscopo G.Marchiandi G.Atzeni E.Salmi A.Iuliano L. | 2022_Maculotti_et_al_EBM_orientation_CIRP_CSI.pdf |
| Effect of process parameters on AISI 316L single tracks by laser powder directed energy deposition / Poggi, Mirna; Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca. - (2022). (Intervento presentato al convegno 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering). | 1-gen-2022 | Mirna PoggiAlessandro SalmiEleonora AtzeniLuca Iuliano | - |
| Study on the machinability of Ti6Al4V parts produced by electron beam powder bed fusion / Valenza, Federica; Atzeni, Eleonora; Iuliano, Luca; Saboori, Abdollah; Salmi, Alessandro. - (2022). (Intervento presentato al convegno 10th International Conference on Advanced Technologies tenutosi a Van (TR) nel 25-27 novembre 2022). | 1-gen-2022 | Valenza, FedericaAtzeni, EleonoraIuliano, LucaSaboori, AbdollahSalmi, Alessandro | Study on the machinability of Ti6Al4V parts produced by electron beam powder bed fusion - Abstract - Federica Valenza.pdf |
| Thermo-mechanical modelling of the Directed Energy Deposition (DED) process for the optimization of deposi-tion strategies / Vallone, Marco; Damasio, Massimo; Atzeni, Eleonora; Poggi, Mirna; Salmi, Alessandro. - (2022). (Intervento presentato al convegno 4th International Symposium on Dynamic Response and Failure of Composite Materials). | 1-gen-2022 | Eleonora AtzeniMirna PoggiAlessandro Salmi + | - |