GALATI, MANUELA
GALATI, MANUELA
Dipartimento di Ingegneria Gestionale e della Produzione
032281
Characterisation of an Additively Manufactured 3D Cross-Based Fractal Structure for Impact Energy Absorption
2024 Viccica, M.; Serra, G. F.; Fernandes, F.; Calignano, F.; Iuliano, L.; de Sousa, R. A.; Galati, M.
Additive manufacturing of copper with a single mode IR fiber laser
2023 Calignano, Flaviana; Pavese, Matteo; Saboori, Abdollah; Galati, Manuela; Iuliano, Luca
An additively manufactured fractal structure for impact absorption applications
2023 Viccica, Marco; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca
Evaluation of the effective thermal conductivity of the unmelted powder particles during the electron beam powder bed fusion (EB-PBF) process
2023 Rizza, Giovanni; Galati, Manuela; Iuliano, Luca
Modelling the thermal behaviour of Ti6Al4V sintered powder bed in electron beam powder bed fusion (EB-PBF)
2023 Galati, Manuela; Campagnoli, Elena; Giaretto, Valter; Iuliano, Luca
In-Situ Monitoring for Open Low-Cost 3d Printing
2022 Minetola, P.; Khandpur, M. S.; Iuliano, L.; Calignano, F.; Galati, M.; Fontana, L.
Laser powder bed fusion of AISI 316L lattice structures for biomedical applications
2022 Lannunziata, Erika; Saboori, Abdollah; Galati, Manuela; Iuliano, Luca
Simulating the sintering of powder particles during the preheating step of Electron Beam Melting process: Review, challenges and a proposal
2022 Rizza, G.; Galati, M.; Iuliano, L.
Unit process energy consumption analysis and models for electron beam powder bed fusion (EB-PBF): Effects of chamber saturation
2022 Galati, Manuela; Lunetto, Vincenzo; Imbriglio, Luca; Iuliano, Luca; Settineri, Luca
Development of a low-cost monitoring system for open 3d printing
2021 Khandpur, M S; Galati, M; Minetola, P; Marchiandi, G; Fontana, L; Stiuso, V
Experimental assessment of compensated distortion in selective laser melting of Ti6Al4V parts
2021 Stiuso, V; Minetola, P; Calignano, F; Galati, M; Khandpur, M S; Fontana, L
Experimental validation of laser powder bed fusion simulation
2021 Minetola, Paolo; Stiuso, Vito; Calignano, Flaviana; Galati, Manuela; Khandpur, Mankirat Singh; Fontana, Luca
Redesigning a flexural joint for metal-based additive manufacturing
2021 Ercolini, Edoardo; Calignano, Flaviana; Galati, Manuela; Viccica, Marco; Iuliano, Luca
Residual stress investigation on Ti-48Al-2Cr-2Nb samples produced by Electron Beam Melting process
2021 Galati, M.; Rizza, G.; Salmi, A.; Biamino, S.; Ghibaudo, C.; Fino, P.; Iuliano, L.
Accuracy of down-facing surfaces in complex internal channels produced by laser powder bed fusion (L-PBF)
2020 Calignano, F.; Iuliano, L.; Galati, M.; Minetola, P.; Marchiandi, G.
Comparison of dimensional tolerance grades for metal AM processes
2020 Minetola, Paolo; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca; Rizza, Giovanni; Fontana, Luca
Ti-6Al-4V lattice structures produced by EBM: Heat treatment and mechanical properties
2020 Galati, M.; Saboori, A.; Biamino, S.; Calignano, F.; Lombardi, M.; Marchiandi, G.; Minetola, P.; Fino, P.; Iuliano, L.
A methodology for evaluating the aesthetic quality of 3D printed parts
2019 Galati, M.; Minetola, P.; Marchiandi, G.; Atzeni, E.; Calignano, F.; Salmi, A.; Iuliano, L.
High-performance microwave waveguide devices produced by laser powder bed fusion process
2019 Calignano, Flaviana; Peverini, Oscar Antonio; Addamo, Giuseppe; Paonessa, Fabio; Manfredi, DIEGO GIOVANNI; Galati, Manuela; Salmi, Alessandro; Atzeni, Eleonora; Minetola, Paolo; Iuliano, Luca
Machining induced residual stresses in AlSi10Mg component produced by Laser Powder Bed Fusion (L-PBF)
2019 Piscopo, Gabriele; Atzeni, Eleonora; Calignano, Flaviana; Galati, Manuela; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro
Citazione | Data di pubblicazione | Autori | File |
---|---|---|---|
Characterisation of an Additively Manufactured 3D Cross-Based Fractal Structure for Impact Energy Absorption / Viccica, M.; Serra, G. F.; Fernandes, F.; Calignano, F.; Iuliano, L.; de Sousa, R. A.; Galati, M.. - ELETTRONICO. - 437:(2024), pp. 454-461. (Intervento presentato al convegno 2nd Italian Workshop on Shell and Spatial Structures, IWSS 2023 tenutosi a ita nel 2023) [10.1007/978-3-031-44328-2_47]. | 1-gen-2024 | Viccica M.Calignano F.Iuliano L.Galati M. + | - |
Additive manufacturing of copper with a single mode IR fiber laser / Calignano, Flaviana; Pavese, Matteo; Saboori, Abdollah; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 118:(2023), pp. 649-653. (Intervento presentato al convegno CIRP ICME '22 Conference tenutosi a Virtual Conference nel Luglio 2022) [10.1016/j.procir.2023.06.111]. | 1-gen-2023 | Flaviana, CalignanoMatteo, PaveseAbdollah, SabooriManuela, GalatiLuca, Iuliano | 1-s2.0-S2212827123003384-main.pdf |
An additively manufactured fractal structure for impact absorption applications / Viccica, Marco; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca. - ELETTRONICO. - 118:(2023), pp. 793-798. (Intervento presentato al convegno 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ‘22, Italy tenutosi a Gulf of Naples (IT) nel 13 - 15 July 2022) [10.1016/j.procir.2023.06.136]. | 1-gen-2023 | Marco ViccicaManuela GalatiFlaviana CalignanoLuca Iuliano | 1-s2.0-S2212827123003633-main.pdf |
Evaluation of the effective thermal conductivity of the unmelted powder particles during the electron beam powder bed fusion (EB-PBF) process / Rizza, Giovanni; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 118:(2023), pp. 765-770. (Intervento presentato al convegno 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ’22, Italy tenutosi a Ischia nel 13-15 Luglio 2022) [10.1016/j.procir.2023.06.131]. | 1-gen-2023 | Rizza, GiovanniGalati, ManuelaIuliano, Luca | 1-s2.0-S221282712300358X-main.pdf |
Modelling the thermal behaviour of Ti6Al4V sintered powder bed in electron beam powder bed fusion (EB-PBF) / Galati, Manuela; Campagnoli, Elena; Giaretto, Valter; Iuliano, Luca. - 118:(2023), pp. 664-669. (Intervento presentato al convegno 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering) [10.1016/j.procir.2023.06.114]. | 1-gen-2023 | Galati, ManuelaCampagnoli, ElenaGiaretto, ValterIuliano, Luca | - |
In-Situ Monitoring for Open Low-Cost 3d Printing / Minetola, P.; Khandpur, M. S.; Iuliano, L.; Calignano, F.; Galati, M.; Fontana, L.. - ELETTRONICO. - (2022), pp. 49-56. (Intervento presentato al convegno 10th International Conference on Manufacturing Engineering and Processes 2021 (ICMEP 2021) tenutosi a Singapore (Virtual) nel 11–14 marzo 2021) [10.1007/978-981-16-3934-0_7]. | 1-gen-2022 | Minetola P.Khandpur M. S.Iuliano L.Calignano F.Galati M.Fontana L. | Printed version_Minetola_ICMT2021.pdf |
Laser powder bed fusion of AISI 316L lattice structures for biomedical applications / Lannunziata, Erika; Saboori, Abdollah; Galati, Manuela; Iuliano, Luca. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - (2022). (Intervento presentato al convegno The International Conference on Additive Manufacturing for a Better World. tenutosi a Singapore) [10.1016/j.matpr.2022.09.267]. | 1-gen-2022 | Lannunziata, ErikaSaboori, AbdollahGalati, ManuelaIuliano, Luca | 1-s2.0-S2214785322060850-main.pdf |
Simulating the sintering of powder particles during the preheating step of Electron Beam Melting process: Review, challenges and a proposal / Rizza, G.; Galati, M.; Iuliano, L.. - 112:(2022), pp. 388-393. (Intervento presentato al convegno 15th CIRP Conference on Intelligent Computation in Manufacturing Engineering, ICME 2021 tenutosi a Gulf of Naples, Italy nel 14-16 July 2021) [10.1016/j.procir.2022.09.025]. | 1-gen-2022 | Rizza G.Galati M.Iuliano L. | 1-s2.0-S2212827122011672-main.pdf |
Unit process energy consumption analysis and models for electron beam powder bed fusion (EB-PBF): Effects of chamber saturation / Galati, Manuela; Lunetto, Vincenzo; Imbriglio, Luca; Iuliano, Luca; Settineri, Luca. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 70:(2022), pp. 401-406. (Intervento presentato al convegno The International Conference on Additive Manufacturing for a Better World (AMBW 2022) tenutosi a Singapore nel 23-25 August 2022) [10.1016/j.matpr.2022.09.276]. | 1-gen-2022 | Galati, ManuelaLunetto, VincenzoImbriglio, LucaIuliano, LucaSettineri, Luca | 1-s2.0-S2214785322060965-main.pdf |
Development of a low-cost monitoring system for open 3d printing / Khandpur, M S; Galati, M; Minetola, P; Marchiandi, G; Fontana, L; Stiuso, V. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - 1136:(2021), p. 012044. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021) tenutosi a Madhya Pradesh, India nel 6th-7th March 2021) [10.1088/1757-899x/1136/1/012044]. | 1-gen-2021 | Khandpur, M SGalati, MMinetola, PMarchiandi, GFontana, LStiuso, V | Khandpur_2021_IOP_Conf_Ser_Mater_Sci_Eng_1136_012044.pdf |
Experimental assessment of compensated distortion in selective laser melting of Ti6Al4V parts / Stiuso, V; Minetola, P; Calignano, F; Galati, M; Khandpur, M S; Fontana, L. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - 1136:(2021), p. 012048. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021) tenutosi a Madhya Pradesh, India nel 6th-7th March 2021) [10.1088/1757-899x/1136/1/012048]. | 1-gen-2021 | Stiuso, VMinetola, PCalignano, FGalati, MKhandpur, M SFontana, L | Stiuso_2021_IOP_Conf_Ser_Mater_Sci_Eng_1136_012048.pdf |
Experimental validation of laser powder bed fusion simulation / Minetola, Paolo; Stiuso, Vito; Calignano, Flaviana; Galati, Manuela; Khandpur, Mankirat Singh; Fontana, Luca. - ELETTRONICO. - (2021), pp. 1-10. (Intervento presentato al convegno 3rd International Conference on Inventive Research in Material Science and Technology (ICIRMCT 2021) tenutosi a Coimbatore (India) nel 22-23 gennaio 2021) [10.1088/1757-899X/1091/1/012048]. | 1-gen-2021 | Minetola, PaoloStiuso, VitoCalignano, FlavianaGalati, ManuelaKhandpur, Mankirat SinghFontana, Luca | Minetola_2021_IOP_Conf._Ser.__Mater._Sci._Eng._1091_012048.pdf |
Redesigning a flexural joint for metal-based additive manufacturing / Ercolini, Edoardo; Calignano, Flaviana; Galati, Manuela; Viccica, Marco; Iuliano, Luca. - ELETTRONICO. - 100:(2021), pp. 469-475. (Intervento presentato al convegno 31st CIRP Design Conference 2021 tenutosi a Twente nel 19 May 2021 - 21 May 2021) [10.1016/j.procir.2021.05.106]. | 1-gen-2021 | Calignano, FlavianaGalati, ManuelaViccica, MarcoIuliano, Luca + | 1-s2.0-S2212827121005771-main.pdf |
Residual stress investigation on Ti-48Al-2Cr-2Nb samples produced by Electron Beam Melting process / Galati, M.; Rizza, G.; Salmi, A.; Biamino, S.; Ghibaudo, C.; Fino, P.; Iuliano, L.. - ELETTRONICO. - 99:(2021), pp. 336-341. (Intervento presentato al convegno 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2020 tenutosi a Ischia (NA), Gulf of Naples; Italy nel 15-17 July 2020) [10.1016/j.procir.2021.03.049]. | 1-gen-2021 | Galati M.Rizza G.Salmi A.Biamino S.Ghibaudo C.Fino P.Iuliano L. | 1-s2.0-S2212827121003255-main.pdf |
Accuracy of down-facing surfaces in complex internal channels produced by laser powder bed fusion (L-PBF) / Calignano, F.; Iuliano, L.; Galati, M.; Minetola, P.; Marchiandi, G.. - 88:(2020), pp. 423-426. (Intervento presentato al convegno 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2019 tenutosi a ita nel 2019) [10.1016/j.procir.2020.05.073]. | 1-gen-2020 | Calignano F.Iuliano L.Galati M.Minetola P.Marchiandi G. | 1-s2.0-S2212827120303942-main.pdf |
Comparison of dimensional tolerance grades for metal AM processes / Minetola, Paolo; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca; Rizza, Giovanni; Fontana, Luca. - ELETTRONICO. - 88:(2020), pp. 399-404. (Intervento presentato al convegno 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME '19 tenutosi a Ischia (NA), Gulf of Naples, Italy nel 17-19 July 2019) [https://doi.org/10.1016/j.procir.2020.05.069]. | 1-gen-2020 | Minetola, PaoloGalati, ManuelaCalignano, FlavianaIuliano, LucaRizza, GiovanniFontana, Luca | ICME 2019 - Benchmarking Metal AM.pdf |
Ti-6Al-4V lattice structures produced by EBM: Heat treatment and mechanical properties / Galati, M.; Saboori, A.; Biamino, S.; Calignano, F.; Lombardi, M.; Marchiandi, G.; Minetola, P.; Fino, P.; Iuliano, L.. - 88:(2020), pp. 411-416. (Intervento presentato al convegno 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2019 tenutosi a ita nel 2019) [10.1016/j.procir.2020.05.071]. | 1-gen-2020 | Galati M.Saboori A.Biamino S.Calignano F.Lombardi M.Marchiandi G.Minetola P.Fino P.Iuliano L. | 1-s2.0-S2212827120303905-main.pdf |
A methodology for evaluating the aesthetic quality of 3D printed parts / Galati, M.; Minetola, P.; Marchiandi, G.; Atzeni, E.; Calignano, F.; Salmi, A.; Iuliano, L.. - 79:(2019), pp. 95-100. (Intervento presentato al convegno 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2018) tenutosi a Ischia (NA) nel 18-20 July 2018) [10.1016/j.procir.2019.02.018]. | 1-gen-2019 | Galati M.Minetola P.Marchiandi G.Atzeni E.Calignano F.Salmi A.Iuliano L. | 1-s2.0-S2212827119301325-main.pdf |
High-performance microwave waveguide devices produced by laser powder bed fusion process / Calignano, Flaviana; Peverini, Oscar Antonio; Addamo, Giuseppe; Paonessa, Fabio; Manfredi, DIEGO GIOVANNI; Galati, Manuela; Salmi, Alessandro; Atzeni, Eleonora; Minetola, Paolo; Iuliano, Luca. - ELETTRONICO. - 79:(2019), pp. 85-88. (Intervento presentato al convegno CIRP-ICME tenutosi a Ischia) [10.1016/j.procir.2019.02.016]. | 1-gen-2019 | Calignano FlavianaOscar Antonio PeveriniGiuseppe AddamoFabio PaonessaDiego ManfrediManuela GalatiAlessandro SalmiEleonora AtzeniPaolo MinetolaLuca Iuliano | - |
Machining induced residual stresses in AlSi10Mg component produced by Laser Powder Bed Fusion (L-PBF) / Piscopo, Gabriele; Atzeni, Eleonora; Calignano, Flaviana; Galati, Manuela; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro. - 79:(2019), pp. 101-106. (Intervento presentato al convegno 12th CIRP Conference on Intelligent computation in manufacturing engineering) [10.1016/j.procir.2019.02.019]. | 1-gen-2019 | Piscopo, GabrieleAtzeni, EleonoraCalignano, FlavianaGalati, ManuelaIuliano, LucaMinetola, PaoloSalmi, Alessandro | - |