Archivio Istituzionale della RicercaGALATI, MANUELA
GALATI, MANUELA
Dipartimento di Ingegneria Gestionale e della Produzione
032281
Inspecting Defects of EB-PBF Components with Active Thermography and Deep Learning: A Feasibility Study
In corso di stampa Hosseini, Seyed Mohammad Mehdi; Depaoli, Fabio; Ponzio, Francesco; De Giorgi, Simone; Rizza, Giovanni; Tognoli, Emanuele; Colombini, Giulia; Galati, Manuela; Di Cataldo, Santa
A novel methodology for predicting energy and time consumption in additive manufacturing powder bed fusion with electron beam system using neural network
2025 Antonioni, Paolo; Lunetto, Vincenzo; Galati, Manuela
A Review of Ex-situ, In situ and Artificial Intelligence-based Thermographic Measurements in Additively Manufactured Parts
2025 Galati, M.; De Giorgi, S.; Rizza, G.; Tognoli, E.; Colombini, G.; Denti, L.; Bassoli, E.; Iuliano, L.
Assessment of simulation software for predicting induced distortions in laser-beam powder bed fusion of Ti6Al4V
2025 Giubilini, Alberto; Calignano, Flaviana; Galati, Manuela; Minetola, Paolo
Characterization and Finite Element Analyses of Tensile and Bending Behavior of Nylon Reinforced with Continuous Carbon Fiber Produced by Additive Manufacturing
2025 Galati, M.; Minetola, P.; Rizza, G.
Detection of sub-superficial defects by infrared thermography in parts made by powder bed fusion with electron beam
2025 Defanti, Silvio; De Giorgi, Simone; Rizza, Giovanni; Colombini, Giulia; Tognoli, Emanuele; Ayberk Gürbüz, Ahmet; Denti, Lucia; Galati, Manuela; Iuliano, Luca
Detection of sub-superficial defects by infrared thermography in parts made by powder bed fusion with electron beam
2025 Defanti, Silvio; De Giorgi, Simone; Rizza, Giovanni; Colombini, Giulia; Denti, Lucia; Galati, Manuela
Effect of 3D grading thickness on mechanical and deformation behaviour of gyroid structures produced via powder bed fusion with electron beam
2025 Bruson, D.; Rizza, G.; Galati, M.
Effect of Rigid Body Motion in Phase Field Simulation of Sintering during Preheating at the Powder Bed Fusion with Electron Beam Conditions
2025 Rizza, Giovanni; Gardello, Luca; Galati, Manuela; Iuliano, Luca
Electron beam powder bed fusion of Ti–6Al–2Sn–4Zr–2Mo alloy: microstructure evolution and high-temperature mechanical properties
2025 Saboori, A.; Tognoli, E.; Galati, M.; Denti, L.
Impact of contour on surface quality, dimensional and geometrical accuracy of Ti48Al2Cr2Nb parts produced with powder bed fusion with electron beam process
2025 Rizza, Giovanni; Galati, Manuela; Minetola, Paolo; Antonioni, Paolo; Bruson, Danilo; Marchiandi, Giovanni; Iuliano, Luca
Machine learning-enabled real-time anomaly detection for electron beam powder bed fusion additive manufacturing
2025 Cannizzaro, Davide; Antonioni, Paolo; Ponzio, Francesco; Galati, Manuela; Patti, Edoardo; Di Cataldo, Santa
Phase-field simulation of particles rigid body motion at the early stage of sintering in powder bed fusion with electron beam: A proposal for computational efficiency
2025 Galati, M.; Rizza, G.
Revealing the (positive) role of porosity within polymeric additively manufactured lattices via X-ray computed tomography
2025 Bruson, Danilo; Serrano-Munoz, Itziar; Fritsch, Tobias; Markötter, Henning; Galati, Manuela
Surface functionalization of additively manufactured Ti6Al4V scaffolds with CaP/ZnO coatings
2025 Karimi, Nasrin; Atapour, Masoud; Taherizadeh, Aboozar; Ercan, Batur; Galati, Manuela; Saboori, Abdollah
Ti6Al4V Components by Bound Metal Deposition and Competitive with Metal Injection Molded Parts: Optimization of the Printing Parameters
2025 Sergi, Claudia; Martucci, Alessandra; Galati, Manuela; Lombardi, Mariangela; Rossi, Edoardo; Sebastiani, Marco; Tonelli, Lavinia; Ceschini, Lorella; Tirillò, Jacopo; Sarasini, Fabrizio
A multiscale framework for the evaluation of thermal conductivity of sintered powder at the powder bed fusion with electron beam conditions
2024 Rizza, G.; Galati, M.; Iuliano, L.
A production scheduling case study solved for Electron Beam Powder Bed Fusion
2024 Pastore, Erica; Galati, Manuela; Alfieri, Arianna; Iuliano, Luca
Additive manufacturing of flexible thermoplastic polyurethane (TPU): enhancing the material elongation through process optimisation
2024 Viccica, Marco; Giordano, Massimo; Galati, Manuela
Analytic evaluation of the thermal conductivity at the conditions of the powder bed fusion with electron beam (PBF-EB) additive manufacturing (AM) process
2024 Rizza, Giovanni; Galati, Manuela; Antonioni, Paolo; Iuliano, Luca
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Inspecting Defects of EB-PBF Components with Active Thermography and Deep Learning: A Feasibility Study / Hosseini, Seyed Mohammad Mehdi; Depaoli, Fabio; Ponzio, Francesco; De Giorgi, Simone; Rizza, Giovanni; Tognoli, Emanuele; Colombini, Giulia; Galati, Manuela; Di Cataldo, Santa. - (In corso di stampa). (Intervento presentato al convegno 30th International Conference on Emerging Technologies and Factory Automation tenutosi a Porto (PT) nel 9th-12th September 2025). | In corso di stampa | Hosseini, Seyed Mohammad MehdiDepaoli, FabioPonzio, FrancescoDe Giorgi, SimoneRizza, GiovanniGalati, ManuelaDi Cataldo, Santa + | - |
| A novel methodology for predicting energy and time consumption in additive manufacturing powder bed fusion with electron beam system using neural network / Antonioni, Paolo; Lunetto, Vincenzo; Galati, Manuela. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2025). [10.1007/s00170-025-15570-3] | 1-gen-2025 | Antonioni, PaoloLunetto, VincenzoGalati, Manuela | Paper online.pdf |
| A Review of Ex-situ, In situ and Artificial Intelligence-based Thermographic Measurements in Additively Manufactured Parts / Galati, M.; De Giorgi, S.; Rizza, G.; Tognoli, E.; Colombini, G.; Denti, L.; Bassoli, E.; Iuliano, L.. - In: JOURNAL OF NONDESTRUCTIVE EVALUATION. - ISSN 0195-9298. - ELETTRONICO. - 44:3(2025). [10.1007/s10921-025-01195-9] | 1-gen-2025 | Galati M.De Giorgi S.Rizza G.Iuliano L. + | s10921-025-01195-9.pdf |
| Assessment of simulation software for predicting induced distortions in laser-beam powder bed fusion of Ti6Al4V / Giubilini, Alberto; Calignano, Flaviana; Galati, Manuela; Minetola, Paolo. - In: THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 1433-3015. - ELETTRONICO. - 138:(2025), pp. 1039-1054. [10.1007/s00170-025-15576-x] | 1-gen-2025 | Giubilini, AlbertoCalignano, FlavianaGalati, ManuelaMinetola, Paolo | 2025_Assessment of simulation software for predicting induced distortions in laser‑beam powder bed fusion of Ti6Al4V.pdf |
| Characterization and Finite Element Analyses of Tensile and Bending Behavior of Nylon Reinforced with Continuous Carbon Fiber Produced by Additive Manufacturing / Galati, M.; Minetola, P.; Rizza, G.. - In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. - ISSN 1544-1024. - ELETTRONICO. - (2025). [10.1007/s11665-025-11934-8] | 1-gen-2025 | Galati M.Minetola P.Rizza G. | s11665-025-11934-8 (1).pdf |
| Detection of sub-superficial defects by infrared thermography in parts made by powder bed fusion with electron beam / Defanti, Silvio; De Giorgi, Simone; Rizza, Giovanni; Colombini, Giulia; Tognoli, Emanuele; Ayberk Gürbüz, Ahmet; Denti, Lucia; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 57:(2025), pp. 38-46. (Intervento presentato al convegno 17th Italian Manufacturing Association Conference, AITeM 2025 tenutosi a Bari (Italia) nel 10 September 2025 - 12 September 2025) [10.21741/9781644903735-5]. | 1-gen-2025 | Simone DE GIORGIGiovanni RIZZAManuela GalatiLuca Iuliano + | - |
| Detection of sub-superficial defects by infrared thermography in parts made by powder bed fusion with electron beam / Defanti, Silvio; De Giorgi, Simone; Rizza, Giovanni; Colombini, Giulia; Denti, Lucia; Galati, Manuela. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - ELETTRONICO. - (2025). [10.1007/s40964-025-01313-z] | 1-gen-2025 | De Giorgi, SimoneRizza, GiovanniGalati, Manuela + | s40964-025-01313-z.pdf |
| Effect of 3D grading thickness on mechanical and deformation behaviour of gyroid structures produced via powder bed fusion with electron beam / Bruson, D.; Rizza, G.; Galati, M.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9520. - ELETTRONICO. - (2025). [10.1007/s40964-025-01388-8] | 1-gen-2025 | Bruson D.Rizza G.Galati M. | s40964-025-01388-8.pdf |
| Effect of Rigid Body Motion in Phase Field Simulation of Sintering during Preheating at the Powder Bed Fusion with Electron Beam Conditions / Rizza, Giovanni; Gardello, Luca; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 169:(2025), pp. 21-26. (Intervento presentato al convegno 13th International Conference on Engineering and Innovative Materials, ICEIM 2024 and 6th International Conference on Advances in Materials, Mechanical and Manufacturing, AMMM 2024 tenutosi a Tokio (Japan) nel 6-8/09/2024) [10.4028/p-t7ow0y]. | 1-gen-2025 | Rizza, GiovanniGalati, ManuelaIuliano, Luca + | - |
| Electron beam powder bed fusion of Ti–6Al–2Sn–4Zr–2Mo alloy: microstructure evolution and high-temperature mechanical properties / Saboori, A.; Tognoli, E.; Galati, M.; Denti, L.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - (2025). [10.1007/s40964-025-00996-8] | 1-gen-2025 | Saboori A.Galati M. + | s40964-025-00996-8.pdf |
| Impact of contour on surface quality, dimensional and geometrical accuracy of Ti48Al2Cr2Nb parts produced with powder bed fusion with electron beam process / Rizza, Giovanni; Galati, Manuela; Minetola, Paolo; Antonioni, Paolo; Bruson, Danilo; Marchiandi, Giovanni; Iuliano, Luca. - ELETTRONICO. - 57:(2025), pp. 11-19. (Intervento presentato al convegno Italian Manufacturing Association Conference - XVII AITeM tenutosi a Bari (Italia) nel 10-12/09/2025) [10.21741/9781644903735-2]. | 1-gen-2025 | Giovanni RIZZAManuela GALATIPaolo MINETOLAPaolo ANTONIONIDanilo BRUSONGiovanni MARCHIANDILuca IULIANO | - |
| Machine learning-enabled real-time anomaly detection for electron beam powder bed fusion additive manufacturing / Cannizzaro, Davide; Antonioni, Paolo; Ponzio, Francesco; Galati, Manuela; Patti, Edoardo; Di Cataldo, Santa. - In: JOURNAL OF INTELLIGENT MANUFACTURING. - ISSN 0956-5515. - 36:(2025), pp. 2105-2119. [10.1007/s10845-024-02359-6] | 1-gen-2025 | Cannizzaro, DavideAntonioni, PaoloPonzio, FrancescoGalati, ManuelaPatti, EdoardoDi Cataldo, Santa | s10845-024-02359-6.pdf |
| Phase-field simulation of particles rigid body motion at the early stage of sintering in powder bed fusion with electron beam: A proposal for computational efficiency / Galati, M.; Rizza, G.. - In: FINITE ELEMENTS IN ANALYSIS AND DESIGN. - ISSN 0168-874X. - ELETTRONICO. - 248:(2025). [10.1016/j.finel.2025.104359] | 1-gen-2025 | Galati M.Rizza G. | Published paper.pdf |
| Revealing the (positive) role of porosity within polymeric additively manufactured lattices via X-ray computed tomography / Bruson, Danilo; Serrano-Munoz, Itziar; Fritsch, Tobias; Markötter, Henning; Galati, Manuela. - In: INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES. - ISSN 0020-7683. - 264:(2025). [10.1016/j.ijsolstr.2025.113488] | 1-gen-2025 | Bruson, DaniloGalati, Manuela + | 1-s2.0-S0020768325002744-main.pdf |
| Surface functionalization of additively manufactured Ti6Al4V scaffolds with CaP/ZnO coatings / Karimi, Nasrin; Atapour, Masoud; Taherizadeh, Aboozar; Ercan, Batur; Galati, Manuela; Saboori, Abdollah. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - 10:10(2025), pp. 8489-8508. [10.1007/s40964-025-01132-2] | 1-gen-2025 | Galati, ManuelaSaboori, Abdollah + | s40964-025-01132-2.pdf |
| Ti6Al4V Components by Bound Metal Deposition and Competitive with Metal Injection Molded Parts: Optimization of the Printing Parameters / Sergi, Claudia; Martucci, Alessandra; Galati, Manuela; Lombardi, Mariangela; Rossi, Edoardo; Sebastiani, Marco; Tonelli, Lavinia; Ceschini, Lorella; Tirillò, Jacopo; Sarasini, Fabrizio. - In: ADVANCED ENGINEERING MATERIALS. - ISSN 1527-2648. - 27:10(2025). [10.1002/adem.202402813] | 1-gen-2025 | Martucci, AlessandraGalati, ManuelaLombardi, MariangelaRossi, Edoardo + | Adv+Eng+Mater+-+2025+-+Sergi+-+Ti6Al4V+Components+by+Bound+Metal+Deposition+and+Competitive+with+Metal+Injection+Molded+(1)-1_compressed.pdf |
| A multiscale framework for the evaluation of thermal conductivity of sintered powder at the powder bed fusion with electron beam conditions / Rizza, G.; Galati, M.; Iuliano, L.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - ELETTRONICO. - (2024). [10.1007/s40964-023-00558-w] | 1-gen-2024 | Rizza G.Galati M.Iuliano L. | s40964-023-00558-w.pdf |
| A production scheduling case study solved for Electron Beam Powder Bed Fusion / Pastore, Erica; Galati, Manuela; Alfieri, Arianna; Iuliano, Luca. - ELETTRONICO. - 58:(2024), pp. 982-987. (Intervento presentato al convegno 18th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2024) tenutosi a Vienna nel 28/08/2024) [10.1016/j.ifacol.2024.09.148]. | 1-gen-2024 | Pastore, EricaGalati, ManuelaAlfieri, AriannaIuliano, Luca | - |
| Additive manufacturing of flexible thermoplastic polyurethane (TPU): enhancing the material elongation through process optimisation / Viccica, Marco; Giordano, Massimo; Galati, Manuela. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - (2024). [10.1007/s40964-024-00790-y] | 1-gen-2024 | Marco, ViccicaMassimo, GiordanoManuela, Galati | 2024_Viccica_Additive manufacturing of flexible thermoplastic polyurethane TPU.pdf |
| Analytic evaluation of the thermal conductivity at the conditions of the powder bed fusion with electron beam (PBF-EB) additive manufacturing (AM) process / Rizza, Giovanni; Galati, Manuela; Antonioni, Paolo; Iuliano, Luca. - ELETTRONICO. - 126:(2024), pp. 585-590. (Intervento presentato al convegno 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2023 tenutosi a Naples (Italy) nel 12 July 2023 - 14 July 2023) [10.1016/j.procir.2024.08.244]. | 1-gen-2024 | Rizza, GiovanniGalati, ManuelaAntonioni, PaoloIuliano, Luca | - |