Archivio Istituzionale della RicercaDE MADDIS, MANUELA
DE MADDIS, MANUELA
Dipartimento di Ingegneria Gestionale e della Produzione
011676
Machine learning tool for the prediction of electrode wear effect on the quality of resistance spot welds
2024 Panza, Luigi; Bruno, Giulia; Antal, Gabriel; DE MADDIS, Manuela; RUSSO SPENA, Pasquale
Non-destructive detection and analysis of weld defects in dissimilar pulsed GMAW and FSW joints of aluminium castings and plates through 3D X-ray computed tomography
2024 Orlando, Mattia; De Maddis, Manuela; Razza, Valentino; Lunetto, Vincenzo
Frequency-based analysis of active laser thermography for spot weld quality assessment
2023 Santoro, Luca; Razza, Valentino; De Maddis, Manuela
Pre-hole friction stir spot welding of dual-phase steels and comparison with resistance spot welding, conventional and pinless friction stir spot welding
2023 Lunetto, Vincenzo; De Maddis, Manuela; Russo Spena, Pasquale
Similar and dissimilar lap friction stir welding of titanium alloys: on the elimination of the hook defect
2023 Lunetto, Vincenzo; DE MADDIS, Manuela; RUSSO SPENA, Pasquale
Strength and microstructure of friction stir welded additively manufactured Scalmalloy® in as-welded and heat-treated conditions
2023 Mirandola, Pietro; Lunetto, Vincenzo; Novel, David; Barozzi, Mario; Bellutti, Pierluigi; De Maddis, Manuela; Russo Spena, Pasquale
Infrared Thermography for Investigation of Surface Quality in Dry Finish Turning of Ti6Al4V
2022 De Maddis, M.; Lunetto, V.; Razza, V.; Russo Spena, P.
Investigation of Strength and Formability of 6016 Aluminum Tailor Welded Blanks
2022 Basile, Dario; Sesana, Raffaella; De Maddis, Manuela; Borella, Luca; Russo Spena, Pasquale
Use of electrode displacement signals for electrode degradation assessment in resistance spot welding
2022 DE MADDIS, Manuela; Panza, Luigi; RUSSO SPENA, Pasquale
Plastic flow behavior of twinning induced plasticity steel from low to warm temperatures
2020 De Maddis, M.; Spena, P. R.
Analytical models for the evaluation of deep-lane autonomous vehicle storage and retrieval system performance
2018 D’Antonio, Gianluca; Maddis, Manuela De; Bedolla, Joel Sauza; Chiabert, Paolo; Lombardi, Franco
Evaluation of roundness tolerance zone using measurements performed on manufactured parts: A probabilistic approach
2018 Chiabert, Paolo; DE MADDIS, Manuela; Genta, Gianfranco; Ruffa, Suela; Yusupov, Jambul
Evaluation of Hot Tearing in Large Mottled Iron Rolls by Microstructural and FEM Casting Analyses
2017 Russo Spena, Pasquale; De Maddis, Manuela; Lombardi, Franco
Probabilistic method in form error evaluation: comparison of different approaches
2017 Chiabert, Paolo; De Maddis, Manuela; Ruffa, Suela; Yusupov, Jambul
Dissimilar Resistance Spot Welding of Q&P and TWIP Steel Sheets
2016 RUSSO SPENA, Pasquale; DE MADDIS, Manuela; Lombardi, Franco; Rossini, Matteo
Effects of Process Parameters on Spot Welding of TRIP and Quenching and Partitioning Steels
2016 RUSSO SPENA, Pasquale; Cortese, Luca; DE MADDIS, Manuela; Lombardi, Franco
Method for automatic alignment recovery of a spur gear
2016 Barbato, Giulio; Chiabert, Paolo; D'Antonio, Gianluca; DE MADDIS, Manuela; Lombardi, Franco; Ruffa, Suela
Sustainability Analysis of Autonomous Vehicle Storage and Retrieval Systems
2016 Bruno, Giulia; D'Antonio, Gianluca; DE MADDIS, Manuela
Weldability and monitoring of resistance spot welding of Q&P and TRIP steels
2016 RUSSO SPENA, Pasquale; DE MADDIS, Manuela; D'Antonio, Gianluca; Lombardi, Franco
Cut quality assessment of CO2 laser cutting of twinning-induced plasticity steel sheets
2015 Russo Spena, P.; DE MADDIS, Manuela; Lombardi, Franco
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Machine learning tool for the prediction of electrode wear effect on the quality of resistance spot welds / Panza, Luigi; Bruno, Giulia; Antal, Gabriel; DE MADDIS, Manuela; RUSSO SPENA, Pasquale. - In: IJIDEM. - ISSN 1955-2505. - ELETTRONICO. - (2024). [10.1007/s12008-023-01733-7] | 1-gen-2024 | Luigi PanzaGiulia BrunoGabriel AntalManuela De MaddisPasquale Russo Spena | Machine learning tool for the prediction of electrode wear effect on the quality of resistance spot welds.pdf |
| Non-destructive detection and analysis of weld defects in dissimilar pulsed GMAW and FSW joints of aluminium castings and plates through 3D X-ray computed tomography / Orlando, Mattia; De Maddis, Manuela; Razza, Valentino; Lunetto, Vincenzo. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2024). [10.1007/s00170-024-13576-x] | 1-gen-2024 | Orlando, MattiaDe Maddis, ManuelaRazza, ValentinoLunetto, Vincenzo | s00170-024-13576-x.pdf |
| Frequency-based analysis of active laser thermography for spot weld quality assessment / Santoro, Luca; Razza, Valentino; De Maddis, Manuela. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - (2023). [10.1007/s00170-023-12845-5] | 1-gen-2023 | Santoro, LucaRazza, ValentinoDe Maddis, Manuela | s00170-023-12845-5.pdf |
| Pre-hole friction stir spot welding of dual-phase steels and comparison with resistance spot welding, conventional and pinless friction stir spot welding / Lunetto, Vincenzo; De Maddis, Manuela; Russo Spena, Pasquale. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2023). [10.1007/s00170-023-12400-2] | 1-gen-2023 | Lunetto, VincenzoDe Maddis, ManuelaRusso Spena, Pasquale | - |
| Similar and dissimilar lap friction stir welding of titanium alloys: on the elimination of the hook defect / Lunetto, Vincenzo; DE MADDIS, Manuela; RUSSO SPENA, Pasquale. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2023). [10.1007/s00170-023-11316-1] | 1-gen-2023 | Vincenzo LunettoManuela De MaddisPasquale Russo Spena | s00170-023-11316-1.pdf; AcceptedManuscript.pdf |
| Strength and microstructure of friction stir welded additively manufactured Scalmalloy® in as-welded and heat-treated conditions / Mirandola, Pietro; Lunetto, Vincenzo; Novel, David; Barozzi, Mario; Bellutti, Pierluigi; De Maddis, Manuela; Russo Spena, Pasquale. - In: JOURNAL OF MANUFACTURING PROCESSES. - ISSN 1526-6125. - ELETTRONICO. - 97:7 July 2023(2023), pp. 1-11. [10.1016/j.jmapro.2023.04.051] | 1-gen-2023 | Lunetto, VincenzoDe Maddis, ManuelaRusso Spena, Pasquale + | Accepted manuscript.pdf; Strength and microstructure of friction stir welded additively manufactured Scalmalloy® in as-welded and heat-treated conditions.pdf |
| Infrared Thermography for Investigation of Surface Quality in Dry Finish Turning of Ti6Al4V / De Maddis, M.; Lunetto, V.; Razza, V.; Russo Spena, P.. - In: METALS. - ISSN 2075-4701. - 12:1(2022), p. 154. [10.3390/met12010154] | 1-gen-2022 | De Maddis M.Lunetto V.Razza V.Russo Spena P. | 2022-METALS.Infrared Thermography for Investigation of Surface Quality in Dry Finish Turning of Ti6Al4V.pdf |
| Investigation of Strength and Formability of 6016 Aluminum Tailor Welded Blanks / Basile, Dario; Sesana, Raffaella; De Maddis, Manuela; Borella, Luca; Russo Spena, Pasquale. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 12:10(2022), pp. 1593-1603. [10.3390/met12101593] | 1-gen-2022 | Basile, DarioSesana, RaffaellaDe Maddis, ManuelaRusso Spena, Pasquale + | metals-12-01593-v2.pdf |
| Use of electrode displacement signals for electrode degradation assessment in resistance spot welding / DE MADDIS, Manuela; Panza, Luigi; RUSSO SPENA, Pasquale. - In: JOURNAL OF MANUFACTURING PROCESSES. - ISSN 1526-6125. - ELETTRONICO. - 76:(2022), pp. 93-105. [10.1016/j.jmapro.2022.01.060] | 1-gen-2022 | Manuela De MaddisLuigi PanzaPasquale Russo Spena | PREPRINT_RSW (1).pdf; 1-s2.0-S1526612522000779-main-1.pdf |
| Plastic flow behavior of twinning induced plasticity steel from low to warm temperatures / De Maddis, M.; Spena, P. R.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 9:2(2020), pp. 1708-1719. [10.1016/j.jmrt.2019.11.094] | 1-gen-2020 | De Maddis M.Spena P. R. | 2020-JRMT. Plastic flow behavior of twinning induced plasticity steel from low to warm temperatures.pdf |
| Analytical models for the evaluation of deep-lane autonomous vehicle storage and retrieval system performance / D’Antonio, Gianluca; Maddis, Manuela De; Bedolla, Joel Sauza; Chiabert, Paolo; Lombardi, Franco. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - STAMPA. - 94:5-8(2018), pp. 1811-1824. [10.1007/s00170-017-0313-2] | 1-gen-2018 | D’Antonio, GianlucaMaddis, Manuela DeBedolla, Joel SauzaChiabert, PaoloLombardi, Franco | PostPrint.pdf |
| Evaluation of roundness tolerance zone using measurements performed on manufactured parts: A probabilistic approach / Chiabert, Paolo; DE MADDIS, Manuela; Genta, Gianfranco; Ruffa, Suela; Yusupov, Jambul. - In: PRECISION ENGINEERING. - ISSN 0141-6359. - ELETTRONICO. - 52:(2018), pp. 434-439. [10.1016/j.precisioneng.2018.02.001] | 1-gen-2018 | Paolo ChiabertManuela De MaddisGianfranco GentaSuela RuffaJambul Yusupov | - |
| Evaluation of Hot Tearing in Large Mottled Iron Rolls by Microstructural and FEM Casting Analyses / Russo Spena, Pasquale; De Maddis, Manuela; Lombardi, Franco. - In: STEEL RESEARCH INTERNATIONAL. - ISSN 1611-3683. - 88:8(2017), p. 1600391. [10.1002/srin.201600391] | 1-gen-2017 | Russo Spena, PasqualeDe Maddis, ManuelaLombardi, Franco | - |
| Probabilistic method in form error evaluation: comparison of different approaches / Chiabert, Paolo; De Maddis, Manuela; Ruffa, Suela; Yusupov, Jambul. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - 92:1-4(2017), pp. 447-458. [10.1007/s00170-017-0144-1] | 1-gen-2017 | Chiabert, PaoloDe Maddis, ManuelaRuffa, SuelaYUSUPOV, JAMBUL | - |
| Dissimilar Resistance Spot Welding of Q&P and TWIP Steel Sheets / RUSSO SPENA, Pasquale; DE MADDIS, Manuela; Lombardi, Franco; Rossini, Matteo. - In: MATERIALS AND MANUFACTURING PROCESSES. - ISSN 1042-6914. - 31:3(2016), pp. 291-299. [10.1080/10426914.2015.1048476] | 1-gen-2016 | RUSSO SPENA, PASQUALEDE MADDIS, MANUELALOMBARDI, FRANCO + | - |
| Effects of Process Parameters on Spot Welding of TRIP and Quenching and Partitioning Steels / RUSSO SPENA, Pasquale; Cortese, Luca; DE MADDIS, Manuela; Lombardi, Franco. - In: STEEL RESEARCH INTERNATIONAL. - ISSN 1611-3683. - 87:12(2016), pp. 1592-1600. [10.1002/srin.201600007] | 1-gen-2016 | RUSSO SPENA, PASQUALEDE MADDIS, MANUELALOMBARDI, FRANCO + | srin.201600007.pdf |
| Method for automatic alignment recovery of a spur gear / Barbato, Giulio; Chiabert, Paolo; D'Antonio, Gianluca; DE MADDIS, Manuela; Lombardi, Franco; Ruffa, Suela. - In: INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH. - ISSN 0020-7543. - 54:15(2016), pp. 4475-4486. [10.1080/00207543.2015.1064180] | 1-gen-2016 | BARBATO, GiulioCHIABERT, PaoloD'ANTONIO, GIANLUCADE MADDIS, MANUELALOMBARDI, FRANCORUFFA, SUELA | - |
| Sustainability Analysis of Autonomous Vehicle Storage and Retrieval Systems / Bruno, Giulia; D'Antonio, Gianluca; DE MADDIS, Manuela. - In: WSEAS TRANSACTIONS ON ENVIRONMENT AND DEVELOPMENT. - ISSN 2224-3496. - STAMPA. - 12:(2016), pp. 299-306. | 1-gen-2016 | BRUNO, GIULIAD'ANTONIO, GIANLUCADE MADDIS, MANUELA | - |
| Weldability and monitoring of resistance spot welding of Q&P and TRIP steels / RUSSO SPENA, Pasquale; DE MADDIS, Manuela; D'Antonio, Gianluca; Lombardi, Franco. - In: METALS. - ISSN 2075-4701. - STAMPA. - 6:11(2016), pp. 1-15. [10.3390/met6110270] | 1-gen-2016 | RUSSO SPENA, PASQUALEDE MADDIS, MANUELAD'ANTONIO, GIANLUCALOMBARDI, FRANCO | metals-06-00270.pdf |
| Cut quality assessment of CO2 laser cutting of twinning-induced plasticity steel sheets / Russo Spena, P.; DE MADDIS, Manuela; Lombardi, Franco. - In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART B, JOURNAL OF ENGINEERING MANUFACTURE. - ISSN 0954-4054. - 229:1(2015), pp. 3-19. [10.1177/0954405414525382] | 1-gen-2015 | Russo Spena, P.DE MADDIS, MANUELALOMBARDI, FRANCO | - |