Archivio Istituzionale della RicercaIULIANO, Luca
IULIANO, Luca
Dipartimento di Ingegneria Gestionale e della Produzione
001837
Detection of sub-superficial defects by infrared thermography in parts made by powder bed fusion with electron beam
2025 Defanti, Silvio; De Giorgi, Simone; Rizza, Giovanni; Colombini, Giulia; Tognoli, Emanuele; Ayberk Gürbüz, Ahmet; Denti, Lucia; Galati, Manuela; Iuliano, Luca
Effect of Rigid Body Motion in Phase Field Simulation of Sintering during Preheating at the Powder Bed Fusion with Electron Beam Conditions
2025 Rizza, Giovanni; Gardello, Luca; Galati, Manuela; Iuliano, Luca
Impact of contour on surface quality, dimensional and geometrical accuracy of Ti48Al2Cr2Nb parts produced with powder bed fusion with electron beam process
2025 Rizza, Giovanni; Galati, Manuela; Minetola, Paolo; Antonioni, Paolo; Bruson, Danilo; Marchiandi, Giovanni; Iuliano, Luca
A preliminary study on the flow-induced crystallization phenomenon in 3D printing of polyvinylidene fluoride
2024 Lannunziata, Erika; Minetola, Paolo; Edeleva, Mariya; Cardon, Ludwig; Iuliano, Luca
A production scheduling case study solved for Electron Beam Powder Bed Fusion
2024 Pastore, Erica; Galati, Manuela; Alfieri, Arianna; Iuliano, Luca
Analytic evaluation of the thermal conductivity at the conditions of the powder bed fusion with electron beam (PBF-EB) additive manufacturing (AM) process
2024 Rizza, Giovanni; Galati, Manuela; Antonioni, Paolo; Iuliano, Luca
Characterisation of an Additively Manufactured 3D Cross-Based Fractal Structure for Impact Energy Absorption
2024 Viccica, M.; Serra, G. F.; Fernandes, F.; Calignano, F.; Iuliano, L.; de Sousa, R. A.; Galati, M.
Fabrication and evaluation of freeform surfaces in Directed Energy Deposition
2024 Pilagatti, ADRIANO NICOLA; Valenza, Federica; Vecchi, Giuseppe; Atzeni, Eleonora; Salmi, Alessandro; Iuliano, Luca
Numerical Analysis of Additively Manufactured Polymeric Lattice Structures Under Tensile Load
2024 Bruson, Danilo; Viccica, Marco; Rizza, Giovanni; Antonioni, Paolo; Iuliano, Luca; Galati, Manuela
Surface characteristic of Ti-6Al-4V alloy fabricated by Electron Beam Melting prepared by different surface post treatments
2024 Behjat, Amir; Mosallanejad, Mohammad Hossein; Shamanian, Morteza; Taherizadeh, Aboozar; Iuliano, Luca; Saboori, Abdollah
Tuning Process Parameters to Control the Porosity of Parts Produced with Directed Energy Deposition
2024 Piscopo, G.; Atzeni, E.; Iuliano, L.; Salmi, A.
Additive manufacturing of copper with a single mode IR fiber laser
2023 Calignano, Flaviana; Pavese, Matteo; Saboori, Abdollah; Galati, Manuela; Iuliano, Luca
An additively manufactured fractal structure for impact absorption applications
2023 Viccica, Marco; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca
An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data
2023 Khandpur, M. S.; Minetola, P.; Stiuso, V.; Rifuggiato, S.; Fontana, L.; Lannunziata, E.; Giubilini, A.; Iuliano, L.
Control of the substrate heating in laser powder directed energy deposition repairing by bi-directional spiral deposition strategy
2023 Vecchi, Giuseppe; Atzeni, Eleonora; Iuliano, Luca; Salmi, Alessandro
Effect of powder atomising route on the surface quality and mechanical performance of AISI 316L samples produced via laser powder bed fusion process
2023 Lannunziata, Erika; Zapparoli, Niccolò; Iuliano, Luca; Saboori, Abdollah
Evaluation of the effective thermal conductivity of the unmelted powder particles during the electron beam powder bed fusion (EB-PBF) process
2023 Rizza, Giovanni; Galati, Manuela; Iuliano, Luca
Improving the surface quality and mechanical properties of additively manufactured AISI 316L stainless steel by different surface post-treatment
2023 Behjat, Amir; Lannunziata, Erika; Gadalińska, Elżbieta; Iuliano, Luca; Saboori, Abdollah
Increasing of production rate of laser powder bed fusion systems
2023 Mercurio, Vincenza; Calignano, Flaviana; Viccica, Marco; Iuliano, Luca
Modelling the thermal behaviour of Ti6Al4V sintered powder bed in electron beam powder bed fusion (EB-PBF)
2023 Galati, Manuela; Campagnoli, Elena; Giaretto, Valter; Iuliano, Luca
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Detection of sub-superficial defects by infrared thermography in parts made by powder bed fusion with electron beam / Defanti, Silvio; De Giorgi, Simone; Rizza, Giovanni; Colombini, Giulia; Tognoli, Emanuele; Ayberk Gürbüz, Ahmet; Denti, Lucia; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 57:(2025), pp. 38-46. ( 17th Italian Manufacturing Association Conference, AITeM 2025 Bari (Italia) 10 September 2025 - 12 September 2025) [10.21741/9781644903735-5]. | 1-gen-2025 | Simone DE GIORGIGiovanni RIZZAManuela GalatiLuca Iuliano + | - |
| Effect of Rigid Body Motion in Phase Field Simulation of Sintering during Preheating at the Powder Bed Fusion with Electron Beam Conditions / Rizza, Giovanni; Gardello, Luca; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 169:(2025), pp. 21-26. ( 13th International Conference on Engineering and Innovative Materials, ICEIM 2024 and 6th International Conference on Advances in Materials, Mechanical and Manufacturing, AMMM 2024 Tokio (Japan) 6-8/09/2024) [10.4028/p-t7ow0y]. | 1-gen-2025 | Rizza, GiovanniGalati, ManuelaIuliano, Luca + | - |
| Impact of contour on surface quality, dimensional and geometrical accuracy of Ti48Al2Cr2Nb parts produced with powder bed fusion with electron beam process / Rizza, Giovanni; Galati, Manuela; Minetola, Paolo; Antonioni, Paolo; Bruson, Danilo; Marchiandi, Giovanni; Iuliano, Luca. - ELETTRONICO. - 57:(2025), pp. 11-19. ( Italian Manufacturing Association Conference - XVII AITeM Bari (Italia) 10-12/09/2025) [10.21741/9781644903735-2]. | 1-gen-2025 | Giovanni RIZZAManuela GALATIPaolo MINETOLAPaolo ANTONIONIDanilo BRUSONGiovanni MARCHIANDILuca IULIANO | - |
| A preliminary study on the flow-induced crystallization phenomenon in 3D printing of polyvinylidene fluoride / Lannunziata, Erika; Minetola, Paolo; Edeleva, Mariya; Cardon, Ludwig; Iuliano, Luca. - ELETTRONICO. - (2024), pp. 307-310. (Intervento presentato al convegno International Conference on Polymer Process Innovation (PPI 2024) tenutosi a Ghent (Belgio) nel 18-20 settembre 2024). | 1-gen-2024 | Lannunziata, ErikaMinetola, PaoloIuliano, Luca + | - |
| A production scheduling case study solved for Electron Beam Powder Bed Fusion / Pastore, Erica; Galati, Manuela; Alfieri, Arianna; Iuliano, Luca. - ELETTRONICO. - 58:(2024), pp. 982-987. ( 18th IFAC Symposium on Information Control Problems in Manufacturing (INCOM 2024) Vienna 28/08/2024) [10.1016/j.ifacol.2024.09.148]. | 1-gen-2024 | Pastore, EricaGalati, ManuelaAlfieri, AriannaIuliano, Luca | - |
| Analytic evaluation of the thermal conductivity at the conditions of the powder bed fusion with electron beam (PBF-EB) additive manufacturing (AM) process / Rizza, Giovanni; Galati, Manuela; Antonioni, Paolo; Iuliano, Luca. - ELETTRONICO. - 126:(2024), pp. 585-590. ( 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2023 Naples (Italy) 12 July 2023 - 14 July 2023) [10.1016/j.procir.2024.08.244]. | 1-gen-2024 | Rizza, GiovanniGalati, ManuelaAntonioni, PaoloIuliano, Luca | - |
| Characterisation of an Additively Manufactured 3D Cross-Based Fractal Structure for Impact Energy Absorption / Viccica, M.; Serra, G. F.; Fernandes, F.; Calignano, F.; Iuliano, L.; de Sousa, R. A.; Galati, M.. - ELETTRONICO. - 437:(2024), pp. 454-461. ( 2nd Italian Workshop on Shell and Spatial Structures, IWSS 2023 ita 2023) [10.1007/978-3-031-44328-2_47]. | 1-gen-2024 | Viccica M.Calignano F.Iuliano L.Galati M. + | - |
| Fabrication and evaluation of freeform surfaces in Directed Energy Deposition / Pilagatti, ADRIANO NICOLA; Valenza, Federica; Vecchi, Giuseppe; Atzeni, Eleonora; Salmi, Alessandro; Iuliano, Luca. - ELETTRONICO. - (2024). (Intervento presentato al convegno 24th International Conference of the European Society for Precision Engineering and Nanotechnology). | 1-gen-2024 | Adriano Nicola PilagattiFederica ValenzaGiuseppe VecchiEleonora AtzeniAlessandro SalmiLuca Iuliano | ICE24239_0308055224.pdf |
| Numerical Analysis of Additively Manufactured Polymeric Lattice Structures Under Tensile Load / Bruson, Danilo; Viccica, Marco; Rizza, Giovanni; Antonioni, Paolo; Iuliano, Luca; Galati, Manuela. - 437:(2024), pp. 532-539. ( Italian Workshop on Shell and Spatial Structures (IWSS 2023) Torino June 26-28, 2023) [10.1007/978-3-031-44328-2_55]. | 1-gen-2024 | Danilo BrusonMarco ViccicaGiovanni RizzaPaolo AntonioniLuca IulianoManuela Galati | - |
| Surface characteristic of Ti-6Al-4V alloy fabricated by Electron Beam Melting prepared by different surface post treatments / Behjat, Amir; Mosallanejad, Mohammad Hossein; Shamanian, Morteza; Taherizadeh, Aboozar; Iuliano, Luca; Saboori, Abdollah. - 126:(2024), pp. 692-697. ( 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME ‘23)) [10.1016/j.procir.2024.08.289]. | 1-gen-2024 | Behjat, AmirMosallanejad, Mohammad HosseinIuliano, LucaSaboori, Abdollah + | - |
| Tuning Process Parameters to Control the Porosity of Parts Produced with Directed Energy Deposition / Piscopo, G.; Atzeni, E.; Iuliano, L.; Salmi, A.. - (2024), pp. 434-443. ( 32nd International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023 prt 2023) [10.1007/978-3-031-38241-3_49]. | 1-gen-2024 | Piscopo G.Atzeni E.Iuliano L.Salmi A. | - |
| Additive manufacturing of copper with a single mode IR fiber laser / Calignano, Flaviana; Pavese, Matteo; Saboori, Abdollah; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 118:(2023), pp. 649-653. ( CIRP ICME '22 Conference Virtual Conference Luglio 2022) [10.1016/j.procir.2023.06.111]. | 1-gen-2023 | Flaviana, CalignanoMatteo, PaveseAbdollah, SabooriManuela, GalatiLuca, Iuliano | 1-s2.0-S2212827123003384-main.pdf |
| An additively manufactured fractal structure for impact absorption applications / Viccica, Marco; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca. - ELETTRONICO. - 118:(2023), pp. 793-798. (Intervento presentato al convegno 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ‘22, Italy tenutosi a Gulf of Naples (IT) nel 13 - 15 July 2022) [10.1016/j.procir.2023.06.136]. | 1-gen-2023 | Marco ViccicaManuela GalatiFlaviana CalignanoLuca Iuliano | 1-s2.0-S2212827123003633-main.pdf |
| An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data / Khandpur, M. S.; Minetola, P.; Stiuso, V.; Rifuggiato, S.; Fontana, L.; Lannunziata, E.; Giubilini, A.; Iuliano, L.. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - (2023). ( Fourth International Conference on Recent Advances in Materials and Manufacturing 2022 Erode, Tamil Nadu (INDIA) 08-09/12/2022) [10.1016/j.matpr.2023.03.385]. | 1-gen-2023 | Khandpur M. S.Minetola P.Stiuso V.Rifuggiato S.Fontana L.Lannunziata E.Giubilini A.Iuliano L. | 2023_An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data.pdf |
| Control of the substrate heating in laser powder directed energy deposition repairing by bi-directional spiral deposition strategy / Vecchi, Giuseppe; Atzeni, Eleonora; Iuliano, Luca; Salmi, Alessandro. - (2023). ( EURO PM2023 Congress and Exhibition Lisbona ) [10.59499/EP235762610]. | 1-gen-2023 | Giuseppe VecchiEleonora AtzeniLuca IulianoAlessandro Salmi | - |
| Effect of powder atomising route on the surface quality and mechanical performance of AISI 316L samples produced via laser powder bed fusion process / Lannunziata, Erika; Zapparoli, Niccolò; Iuliano, Luca; Saboori, Abdollah. - ELETTRONICO. - 118:(2023), pp. 688-693. (Intervento presentato al convegno CIRP tenutosi a Ischia) [10.1016/j.procir.2023.06.118]. | 1-gen-2023 | Lannunziata, ErikaIuliano, LucaSaboori, Abdollah + | 1-s2.0-S2212827123003451-main.pdf |
| Evaluation of the effective thermal conductivity of the unmelted powder particles during the electron beam powder bed fusion (EB-PBF) process / Rizza, Giovanni; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 118:(2023), pp. 765-770. ( 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ’22, Italy Ischia 13-15 Luglio 2022) [10.1016/j.procir.2023.06.131]. | 1-gen-2023 | Rizza, GiovanniGalati, ManuelaIuliano, Luca | 1-s2.0-S221282712300358X-main.pdf |
| Improving the surface quality and mechanical properties of additively manufactured AISI 316L stainless steel by different surface post-treatment / Behjat, Amir; Lannunziata, Erika; Gadalińska, Elżbieta; Iuliano, Luca; Saboori, Abdollah. - ELETTRONICO. - 118:(2023), pp. 771-776. ( CIRP Ischia ) [10.1016/j.procir.2023.06.132]. | 1-gen-2023 | Behjat, AmirLannunziata, ErikaIuliano, LucaSaboori, Abdollah + | 1-s2.0-S2212827123003591-main.pdf |
| Increasing of production rate of laser powder bed fusion systems / Mercurio, Vincenza; Calignano, Flaviana; Viccica, Marco; Iuliano, Luca. - ELETTRONICO. - 118:(2023), pp. 699-704. (Intervento presentato al convegno 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ‘22, Italy) [10.1016/j.procir.2023.06.120]. | 1-gen-2023 | Mercurio, VincenzaCalignano, FlavianaViccica, MarcoIuliano, Luca | CIPR.pdf |
| Modelling the thermal behaviour of Ti6Al4V sintered powder bed in electron beam powder bed fusion (EB-PBF) / Galati, Manuela; Campagnoli, Elena; Giaretto, Valter; Iuliano, Luca. - 118:(2023), pp. 664-669. ( 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering) [10.1016/j.procir.2023.06.114]. | 1-gen-2023 | Galati, ManuelaCampagnoli, ElenaGiaretto, ValterIuliano, Luca | 2023_CIRP_Modelling the thermal behaviour of Ti6Al4V sintered powder bed in electron beam powder bed fusion.pdf |