Archivio Istituzionale della RicercaIULIANO, Luca
IULIANO, Luca
Dipartimento di Ingegneria Gestionale e della Produzione
001837
Mostra
records
Risultati 1 - 15 di 15 (tempo di esecuzione: 0.023 secondi).
Additive manufacturing as a cost-effective way to produce metal parts
2014 Atzeni, Eleonora; Iuliano, Luca; Marchiandi, Giovanni; Minetola, Paolo; Salmi, Alessandro; Bassoli, E.; Denti, L.; Gatto, A.
Electro-Discharge Drilling on DMLS parts in Co-Cr-Mo alloy
2014 Gatto, A.; Bassoli, E.; Denti, L.; Atzeni, Eleonora; Iuliano, Luca; Marchiandi, Giovanni; Minetola, Paolo; Salmi, Alessandro; Calignano, F.
Influence of post‐processing operations on mechanical properties of AlSi10Mg Parts by DMLS
2014 Krishnan, M.; Atzeni, E.; Canali, R.; Manfredi, D.; Calignano, F.; Ambrosio, E.; Iuliano, L.
Application of time compression techniques to dental restoration: a procedure for quality evaluation
2012 Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca
Investigation of wear behaviour of FDM fixtures
2012 Minetola, Paolo; Iuliano, Luca
Reverse engineering of casting equipment for process simulation
2012 Calignano, Flaviana; Minetola, Paolo; Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca
Thermoplastic Resin Transfer Moulding in a rapid manufactured mould
2012 Atzeni, Eleonora; Calignano, Flaviana; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro; Bassoli, E.; Denti, L.; Gatto, A.
Performance optimization in machining of aluminium alloys for mould production: HSM and EDM
2011 Gatto, A.; Bassoli, E.; Iuliano, Luca
A benchmark for accuracy evaluation of dental crowns up-to-date manufacturing
2010 Atzeni, Eleonora; Gatto, A; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro
Artificial teeth manufacturing: inspection of mould and teeth by contactless scanning systems
2010 Atzeni, Eleonora; Gatto, A; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro
Surface and subsurface features of micro electro drilled parts produced by sls
2010 Calignano, Flaviana; Gatto, Andrea; Iuliano, Luca
Development of a model to optimize the sand shape and post process parameter for parts produced by direct croning process
2007 Iuliano, Luca; Gatto, A; Cannella, F.
New developments in steel formulations for Direct Laser Sintering: Characterization and evaluation of joining mechanisms
2005 Bassoli, E; Iuliano, Luca; Gatto, A.
Le tecniche di fabbricazione per strati: stato dell'arte, prospettive e applicazioni in campo medicale
1998 Ippolito, R.; Iuliano, Luca; Settineri, Luca; Tornincasa, Stefano
Integrating reverse engineering, rapid prototyping and investment casting in the jeweller’s craft
1995 Iuliano, Luca; Ippolito, R.; Gatto, A.
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Additive manufacturing as a cost-effective way to produce metal parts / Atzeni, Eleonora; Iuliano, Luca; Marchiandi, Giovanni; Minetola, Paolo; Salmi, Alessandro; Bassoli, E.; Denti, L.; Gatto, A. - In: High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013 / Bartolo P.J. et al.. - STAMPA. - London : CRC Press, 2014. - ISBN 9781138001374. - pp. 3-8 [10.1201/b15961-3] | 1-gen-2014 | ATZENI, ELEONORAIULIANO, LucaMARCHIANDI, GIOVANNIMINETOLA, PAOLOSALMI, ALESSANDRO + | - |
| Electro-Discharge Drilling on DMLS parts in Co-Cr-Mo alloy / Gatto, A.; Bassoli, E.; Denti, L.; Atzeni, Eleonora; Iuliano, Luca; Marchiandi, Giovanni; Minetola, Paolo; Salmi, Alessandro; Calignano, F. - In: High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013 / Bartolo P.J. et al.. - STAMPA. - London : CRC Press, 2014. - ISBN 9781138001374. - pp. 237-242 [10.1201/b15961-45] | 1-gen-2014 | ATZENI, ELEONORAIULIANO, LucaMARCHIANDI, GIOVANNIMINETOLA, PAOLOSALMI, ALESSANDROCalignano F. + | - |
| Influence of post‐processing operations on mechanical properties of AlSi10Mg Parts by DMLS / Krishnan, M.; Atzeni, E.; Canali, R.; Manfredi, D.; Calignano, F.; Ambrosio, E.; Iuliano, L. - In: High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013 / Bartolo P.J. et al.. - STAMPA. - London : CRC PRESS, 2014. - ISBN 9781138001374. - pp. 243-248 [10.1201/b15961-46] | 1-gen-2014 | KRISHNAN M.ATZENI E.MANFREDI D.CALIGNANO F.AMBROSIO E.IULIANO L. + | - |
| Application of time compression techniques to dental restoration: a procedure for quality evaluation / Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca - In: Innovative Developments in Virtual and Physical Prototyping / Bartolo P.J. et al.. - ELETTRONICO. - London : CRC Press, 2012. - pp. 169-176 [10.1201/b11341-29] | 1-gen-2012 | SALMI, ALESSANDROATZENI, ELEONORAIULIANO, Luca | - |
| Investigation of wear behaviour of FDM fixtures / Minetola, Paolo; Iuliano, Luca - In: Innovative Developments in Virtual and Physical Prototyping / Bartolo P.J. et al.. - STAMPA. - London : CRC Press, 2012. - ISBN 9780203181416. - pp. 749-756 [10.1201/b11341-120] | 1-gen-2012 | MINETOLA, PAOLOIULIANO, Luca | - |
| Reverse engineering of casting equipment for process simulation / Calignano, Flaviana; Minetola, Paolo; Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca - In: Innovative Developments in Virtual and Physical Prototyping / Bartolo P.J. et al.. - ELETTRONICO. - London : CRC Press, 2012. - pp. 177-186 [10.1201/b11341-30] | 1-gen-2012 | CALIGNANO, FLAVIANAMINETOLA, PAOLOSALMI, ALESSANDROATZENI, ELEONORAIULIANO, Luca | - |
| Thermoplastic Resin Transfer Moulding in a rapid manufactured mould / Atzeni, Eleonora; Calignano, Flaviana; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro; Bassoli, E.; Denti, L.; Gatto, A. - In: Innovative Developments in Virtual and Physical Prototyping / Bartolo P.J. et al.. - ELETTRONICO. - London : CRC Press, 2012. - pp. 413-421 [10.1201/b11341-67] | 1-gen-2012 | ATZENI, ELEONORACALIGNANO, FLAVIANAIULIANO, LucaMINETOLA, PAOLOSALMI, ALESSANDRO + | - |
| Performance optimization in machining of aluminium alloys for mould production: HSM and EDM / Gatto, A.; Bassoli, E.; Iuliano, Luca - In: Aluminium alloys : theory and applications / Kvackaj T., Bidulsky R. (ed.). - Rijeka : InTech, 2011. - ISBN 9789533072449. - pp. 355-376 [10.5772/14847] | 1-gen-2011 | IULIANO, Luca + | - |
| A benchmark for accuracy evaluation of dental crowns up-to-date manufacturing / Atzeni, Eleonora; Gatto, A; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro - In: Innovative Developments in Design and Manufacturing / Bartolo P.J. et al.. - ELETTRONICO. - London : CRC Press, 2010. - pp. 425-430 [10.1201/9780203859476.ch65] | 1-gen-2010 | ATZENI, ELEONORAIULIANO, LucaMINETOLA, PAOLOSALMI, ALESSANDRO + | - |
| Artificial teeth manufacturing: inspection of mould and teeth by contactless scanning systems / Atzeni, Eleonora; Gatto, A; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro - In: Innovative Developments in Design and Manufacturing / Bartolo P.J. et al.. - ELETTRONICO. - London : CRC Press, 2010. - pp. 131-136 [10.1201/9780203859476.ch18] | 1-gen-2010 | ATZENI, ELEONORAIULIANO, LucaMINETOLA, PAOLOSALMI, ALESSANDRO + | - |
| Surface and subsurface features of micro electro drilled parts produced by sls / Calignano, Flaviana; Gatto, Andrea; Iuliano, Luca - In: Additive layered manufacturing:education, application and businessMaribor : Igor Drstvensek, Slavko Dolinsek, 2010. - ISBN 9789612482428. - pp. 77-86 | 1-gen-2010 | CALIGNANO, FLAVIANAGATTO, ANDREAIULIANO, Luca | - |
| Development of a model to optimize the sand shape and post process parameter for parts produced by direct croning process / Iuliano, Luca; Gatto, A; Cannella, F. - In: Virtual and rapid manufacturing / BARTOLO ET AL.. - LONDON : Taylor & Francis Group, 2007. - pp. 359-367 | 1-gen-2007 | IULIANO, Luca + | - |
| New developments in steel formulations for Direct Laser Sintering: Characterization and evaluation of joining mechanisms / Bassoli, E; Iuliano, Luca; Gatto, A. - In: Virtual Modelling and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping / Bartolo P.J. et al.. - STAMPA. - London : CRC Press, 2005. - ISBN 9780415390620. - pp. 317-321 | 1-gen-2005 | IULIANO, Luca + | - |
| Le tecniche di fabbricazione per strati: stato dell'arte, prospettive e applicazioni in campo medicale / Ippolito, R.; Iuliano, Luca; Settineri, Luca; Tornincasa, Stefano - In: Tecnologie 3D in Medicina / S.D. Bianchi, G. Ramieri. - STAMPA. - Napoli : Guido Gnocchi Editore, 1998. - ISBN 8879472062. - pp. 11-18 | 1-gen-1998 | IULIANO, LucaSETTINERI, LucaTORNINCASA, Stefano + | - |
| Integrating reverse engineering, rapid prototyping and investment casting in the jeweller’s craft / Iuliano, Luca; Ippolito, R.; Gatto, A. - In: 11th International Conference on Computer-Aided Production Engineering / Prof. J.A. McGeough. - STAMPA. - Bury St Edmunds : Professional Engineering Publishing, 1995. - ISBN 0852989490. - pp. 85-90 | 1-gen-1995 | IULIANO, Luca + | - |