Archivio Istituzionale della RicercaIULIANO, Luca
IULIANO, Luca
Dipartimento di Ingegneria Gestionale e della Produzione
001837
A Review of Ex-situ, In situ and Artificial Intelligence-based Thermographic Measurements in Additively Manufactured Parts
2025 Galati, M.; De Giorgi, S.; Rizza, G.; Tognoli, E.; Colombini, G.; Denti, L.; Bassoli, E.; Iuliano, L.
Effects of build orientation and inclined features on physical, microstructural and mechanical properties of powder bed fusion additively manufactured metallic parts
2025 Aiza, Ivan; Baldi, Chiara; De La Vega, Federico Matías; Sebastiani, Sara; Veronese, Niccolò Enrico; Yousefi, Mohammad; Mosallanejad, Mohammad Hossein; Maleki, Erfan; Guagliano, Mario; Iuliano, Luca; Saboori, Abdollah; Bagherifard, Sara
High‐Pressure Homogenization: An Industrially Scalable Method for Producing PHBH Powders for Selective Laser Sintering
2025 Giubilini, Alberto; Colucci, Giovanna; Grasselli, Silvia; Iuliano, Luca; Messori, Massimo; Minetola, Paolo
Study of flow-induced crystallization in polyvinylidene fluoride 3D printing
2025 Lannunziata, Erika; Fiorillo, Chiara; Minetola, Paolo; Edeleva, Mariya; Cardon, Ludwig; Iuliano, Luca
Surface Engineering of EB-PBF Ti6Al4V via Anodization: Multifunctional Improvements Through TiO2 Nanotube Arrays
2025 Moradi, Alireza; Tajalli, Sanae; Behjat, Amir; Saboori, Abdollah; Iuliano, Luca
Towards sustainable additive manufacturing of continuous natural yarn-reinforced thermoplastic biocomposites: a review
2025 Dos Santos, Natália V.; Giubilini, Alberto; Minetola, Paolo; Iuliano, Luca; Banea, Mariana D.; Cardoso, Daniel Carlos T.
A multiscale framework for the evaluation of thermal conductivity of sintered powder at the powder bed fusion with electron beam conditions
2024 Rizza, G.; Galati, M.; Iuliano, L.
A novel titanium alloy for load-bearing biomedical implants: Evaluating the antibacterial and biocompatibility of Ti536 produced via electron beam powder bed fusion additive manufacturing process
2024 Behjat, Amir; Sanaei, Saber; Mosallanejad, Mohammad Hossein; Atapour, Masoud; Sheikholeslam, Mohammadali; Saboori, Abdollah; Iuliano, Luca
Additive manufacturing of a novel in-situ alloyed AISI316L-Cu stainless steel: Microstructure and antibacterial properties
2024 Behjat, Amir; Shamanian, Morteza; Sadeghi, Fazlollah; Iuliano, Luca; Saboori, Abdollah
Critical condition for initiation of dynamic recrystallisation in electron beam powder bed fused Ti-6Al-4 V Alloy
2024 Taghian, Mohammad; Mani, Hossein; Mosallanejad, Mohammadhossein; Abdi, Ata; Saboori, Abdollah; Iuliano, Luca
Electron Beam Powder Bed Fusion of Ti-48Al-2Cr-2Nb Open Porous Scaffold for Biomedical Applications: Process Parameters, Adhesion, and Proliferation of NIH-3T3 Cells
2024 Galati, M.; Gatto, M. L.; Bloise, N.; Fassina, L.; Saboori, A.; Visai, L.; Mengucci, P.; Iuliano, L.
Evaluating the Effect of Deposition Strategy on Mechanical Characteristics of 316L Parts Produced by Laser Powder Directed Energy Deposition Process
2024 Piscopo, G.; Iuliano, L.
Experimental and numerical mechanical characterisation of additively manufactured polymeric lattice structures under uniaxial tensile load
2024 Bruson, D.; Iuliano, L.; Galati, M.
Hybrid Multi-Criteria Decision Making for Additive or Conventional Process Selection in the Preliminary Design Phase
2024 Salmi, Alessandro; Vecchi, Giuseppe; Atzeni, Eleonora; Iuliano, Luca
Improvement of Surface Mechanical and Tribological Characteristics of L-PBF Processed Commercially Pure Titanium through Ultrasonic Impact Treatment
2024 Ansarian, Iman; Taghiabadi, Reza; Amini, Saeid; Mosallanejad, Mohammad Hossein; Iuliano, Luca; Saboori, Abdollah
Laser powder bed fusion in situ alloying of AISI 316L-2.5%Cu alloy: microstructure and mechanical properties evolution
2024 Behjat, Amir; Shamanian, Morteza; Iuliano, Luca; Saboori, Abdollah
Microstructure-induced anisotropic tribological properties of Sc-Zr modified Al–Mg alloy (Scalmalloy®) produced via laser powder bed fusion process
2024 Abdi, Ata; Salehi, Majid Seyed; Fatemi, Seyed Ali; Iuliano, Luca; Saboori, Abdollah
On the Use of Green and Blue Laser Sources for Powder Bed Fusion: State of the Art Review for Additive Manufacturing of Copper and Its Alloys
2024 Khandpur, Mankirat Singh; Giubilini, Alberto; Iuliano, Luca; Minetola, Paolo
Process window development of DED-LB/M process with coaxial wire for stainless steel AISI 316L
2024 Stavropoulos, Panagiotis; Bikas, Harry; Tzimanis, Konstantinos; Porevopoulos, Nikos; Pilagatti, ADRIANO NICOLA; Atzeni, Eleonora; Iuliano, Luca; Salmi, Alessandro
Process-induced microstructural variations in laser powder bed fusion of novel titanium alloys: A comprehensive study on volumetric energy density and alloying effects
2024 Talebi, M.; Niroumand, B.; Razaghian, A.; Saboori, A.; Iuliano, L.
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| A Review of Ex-situ, In situ and Artificial Intelligence-based Thermographic Measurements in Additively Manufactured Parts / Galati, M.; De Giorgi, S.; Rizza, G.; Tognoli, E.; Colombini, G.; Denti, L.; Bassoli, E.; Iuliano, L.. - In: JOURNAL OF NONDESTRUCTIVE EVALUATION. - ISSN 0195-9298. - ELETTRONICO. - 44:3(2025). [10.1007/s10921-025-01195-9] | 1-gen-2025 | Galati M.De Giorgi S.Rizza G.Iuliano L. + | - |
| Effects of build orientation and inclined features on physical, microstructural and mechanical properties of powder bed fusion additively manufactured metallic parts / Aiza, Ivan; Baldi, Chiara; De La Vega, Federico Matías; Sebastiani, Sara; Veronese, Niccolò Enrico; Yousefi, Mohammad; Mosallanejad, Mohammad Hossein; Maleki, Erfan; Guagliano, Mario; Iuliano, Luca; Saboori, Abdollah; Bagherifard, Sara. - In: PROGRESS IN MATERIALS SCIENCE. - ISSN 0079-6425. - 147:(2025). [10.1016/j.pmatsci.2024.101357] | 1-gen-2025 | Aiza, IvanYousefi, MohammadMosallanejad, Mohammad HosseinGuagliano, MarioIuliano, LucaSaboori, AbdollahBagherifard, Sara + | 1-s2.0-S0079642524001269-main-Final+version_compressed.pdf |
| High‐Pressure Homogenization: An Industrially Scalable Method for Producing PHBH Powders for Selective Laser Sintering / Giubilini, Alberto; Colucci, Giovanna; Grasselli, Silvia; Iuliano, Luca; Messori, Massimo; Minetola, Paolo. - In: ADVANCED MATERIALS TECHNOLOGIES. - ISSN 2365-709X. - ELETTRONICO. - 10:17(2025), pp. 1-14. [10.1002/admt.202500049] | 1-gen-2025 | Giubilini, AlbertoColucci, GiovannaIuliano, LucaMessori, MassimoMinetola, Paolo + | 2025_High-Pressure Homogenization An Industrially Scalable Method for Producing PHBH Powders for Selective Laser Sintering.pdf |
| Study of flow-induced crystallization in polyvinylidene fluoride 3D printing / Lannunziata, Erika; Fiorillo, Chiara; Minetola, Paolo; Edeleva, Mariya; Cardon, Ludwig; Iuliano, Luca. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2025), pp. 1-13. [10.1007/s00170-025-15139-0] | 1-gen-2025 | Lannunziata, ErikaMinetola, PaoloIuliano, Luca + | s00170-025-15139-0.pdf |
| Surface Engineering of EB-PBF Ti6Al4V via Anodization: Multifunctional Improvements Through TiO2 Nanotube Arrays / Moradi, Alireza; Tajalli, Sanae; Behjat, Amir; Saboori, Abdollah; Iuliano, Luca. - In: COATINGS. - ISSN 2079-6412. - 15:9(2025). [10.3390/coatings15090993] | 1-gen-2025 | Behjat, AmirSaboori, AbdollahIuliano, Luca + | Surface Engineering of EB-PBF Ti6Al4V via Anodization.pdf |
| Towards sustainable additive manufacturing of continuous natural yarn-reinforced thermoplastic biocomposites: a review / Dos Santos, Natália V.; Giubilini, Alberto; Minetola, Paolo; Iuliano, Luca; Banea, Mariana D.; Cardoso, Daniel Carlos T.. - In: CELLULOSE. - ISSN 1572-882X. - ELETTRONICO. - (2025), pp. 1-31. [10.1007/s10570-025-06594-9] | 1-gen-2025 | Giubilini, AlbertoMinetola, PaoloIuliano, Luca + | s10570-025-06594-9.pdf |
| A multiscale framework for the evaluation of thermal conductivity of sintered powder at the powder bed fusion with electron beam conditions / Rizza, G.; Galati, M.; Iuliano, L.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - ELETTRONICO. - (2024). [10.1007/s40964-023-00558-w] | 1-gen-2024 | Rizza G.Galati M.Iuliano L. | s40964-023-00558-w.pdf |
| A novel titanium alloy for load-bearing biomedical implants: Evaluating the antibacterial and biocompatibility of Ti536 produced via electron beam powder bed fusion additive manufacturing process / Behjat, Amir; Sanaei, Saber; Mosallanejad, Mohammad Hossein; Atapour, Masoud; Sheikholeslam, Mohammadali; Saboori, Abdollah; Iuliano, Luca. - In: BIOMATERIALS ADVANCES. - ISSN 2772-9508. - 163:(2024). [10.1016/j.bioadv.2024.213928] | 1-gen-2024 | Behjat, AmirMosallanejad, Mohammad HosseinSaboori, AbdollahIuliano, Luca + | manuscript Ti6Al4V-7Cu Last version.pdf; 1-s2.0-S2772950824001717-main.pdf |
| Additive manufacturing of a novel in-situ alloyed AISI316L-Cu stainless steel: Microstructure and antibacterial properties / Behjat, Amir; Shamanian, Morteza; Sadeghi, Fazlollah; Iuliano, Luca; Saboori, Abdollah. - In: MATERIALS LETTERS. - ISSN 0167-577X. - 355:(2024). [10.1016/j.matlet.2023.135363] | 1-gen-2024 | Behjat, AmirIuliano, LucaSaboori, Abdollah + | Additive manufacturing of a novel insitu alloyed AISI316L-Cu stainlesssteel Microstructure and antibacterial properties.pdf; 1-s2.0-S0167577X23015483-main_compressed.pdf |
| Critical condition for initiation of dynamic recrystallisation in electron beam powder bed fused Ti-6Al-4 V Alloy / Taghian, Mohammad; Mani, Hossein; Mosallanejad, Mohammadhossein; Abdi, Ata; Saboori, Abdollah; Iuliano, Luca. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - 1005:(2024). [10.1016/j.jallcom.2024.176165] | 1-gen-2024 | Taghian, MohammadMosallanejad, MohammadhosseinSaboori, AbdollahIuliano, Luca + | 1-s2.0-S092583882402752X-main_compressed.pdf |
| Electron Beam Powder Bed Fusion of Ti-48Al-2Cr-2Nb Open Porous Scaffold for Biomedical Applications: Process Parameters, Adhesion, and Proliferation of NIH-3T3 Cells / Galati, M.; Gatto, M. L.; Bloise, N.; Fassina, L.; Saboori, A.; Visai, L.; Mengucci, P.; Iuliano, L.. - In: 3D PRINTING AND ADDITIVE MANUFACTURING. - ISSN 2329-7662. - 11:1(2024), pp. 314-322. [10.1089/3dp.2022.0108] | 1-gen-2024 | Galati M.Bloise N.Saboori A.Iuliano L. + | 2024_Galati_Electron Beam Powder Bed Fusion of Ti-48Al-2Cr-2Nb Open Porous Scaffold for Biomedical Applications.pdf |
| Evaluating the Effect of Deposition Strategy on Mechanical Characteristics of 316L Parts Produced by Laser Powder Directed Energy Deposition Process / Piscopo, G.; Iuliano, L.. - In: LASERS IN MANUFACTURING AND MATERIALS PROCESSING. - ISSN 2196-7229. - 11:2(2024), pp. 419-436. [10.1007/s40516-024-00251-y] | 1-gen-2024 | Piscopo G.Iuliano L. | s40516-024-00251-y.pdf |
| Experimental and numerical mechanical characterisation of additively manufactured polymeric lattice structures under uniaxial tensile load / Bruson, D.; Iuliano, L.; Galati, M.. - In: MECCANICA. - ISSN 0025-6455. - (2024). [10.1007/s11012-024-01813-2] | 1-gen-2024 | Bruson D.Iuliano L.Galati M. | s11012-024-01813-2-1.pdf |
| Hybrid Multi-Criteria Decision Making for Additive or Conventional Process Selection in the Preliminary Design Phase / Salmi, Alessandro; Vecchi, Giuseppe; Atzeni, Eleonora; Iuliano, Luca. - In: DESIGNS. - ISSN 2411-9660. - ELETTRONICO. - 8:6(2024). [10.3390/designs8060110] | 1-gen-2024 | Alessandro SalmiGiuseppe VecchiEleonora AtzeniLuca Iuliano | designs-3201324.pdf |
| Improvement of Surface Mechanical and Tribological Characteristics of L-PBF Processed Commercially Pure Titanium through Ultrasonic Impact Treatment / Ansarian, Iman; Taghiabadi, Reza; Amini, Saeid; Mosallanejad, Mohammad Hossein; Iuliano, Luca; Saboori, Abdollah. - In: ACTA METALLURGICA SINICA. - ISSN 1006-7191. - 37:6(2024), pp. 1034-1046. [10.1007/s40195-024-01696-y] | 1-gen-2024 | Mosallanejad, Mohammad HosseinIuliano, LucaSaboori, Abdollah + | s40195-024-01696-y.pdf |
| Laser powder bed fusion in situ alloying of AISI 316L-2.5%Cu alloy: microstructure and mechanical properties evolution / Behjat, Amir; Shamanian, Morteza; Iuliano, Luca; Saboori, Abdollah. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - (2024). [10.1007/s40964-023-00557-x] | 1-gen-2024 | Behjat, AmirIuliano, LucaSaboori, Abdollah + | s40964-023-00557-x.pdf |
| Microstructure-induced anisotropic tribological properties of Sc-Zr modified Al–Mg alloy (Scalmalloy®) produced via laser powder bed fusion process / Abdi, Ata; Salehi, Majid Seyed; Fatemi, Seyed Ali; Iuliano, Luca; Saboori, Abdollah. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - 130:1-2(2024), pp. 755-779. [10.1007/s00170-023-12691-5] | 1-gen-2024 | Iuliano, LucaSaboori, Abdollah + | s00170-023-12691-5.pdf |
| On the Use of Green and Blue Laser Sources for Powder Bed Fusion: State of the Art Review for Additive Manufacturing of Copper and Its Alloys / Khandpur, Mankirat Singh; Giubilini, Alberto; Iuliano, Luca; Minetola, Paolo. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 14:12(2024). [10.3390/met14121464] | 1-gen-2024 | Khandpur, Mankirat SinghGiubilini, AlbertoIuliano, LucaMinetola, Paolo | 2024_On the Use of Green and Blue Laser Sources for Powder Bed Fusion State of the Art Review for Additive Manufacturing of Copper and Its Alloys.pdf |
| Process window development of DED-LB/M process with coaxial wire for stainless steel AISI 316L / Stavropoulos, Panagiotis; Bikas, Harry; Tzimanis, Konstantinos; Porevopoulos, Nikos; Pilagatti, ADRIANO NICOLA; Atzeni, Eleonora; Iuliano, Luca; Salmi, Alessandro. - In: INTERNATIONAL JOURNAL OF EXPERIMENTAL DESIGN AND PROCESS OPTIMISATION. - ISSN 2040-2260. - ELETTRONICO. - (2024). [10.1504/IJEDPO.2024.10063465] | 1-gen-2024 | Adriano Nicola PilagattiEleonora AtzeniLuca IulianoAlessandro Salmi + | stavropoulos-et-al-2024-process-window-development-of-ded-lb-m-process-with-coaxial-wire-for-stainless-steel-aisi-316l.pdf |
| Process-induced microstructural variations in laser powder bed fusion of novel titanium alloys: A comprehensive study on volumetric energy density and alloying effects / Talebi, M.; Niroumand, B.; Razaghian, A.; Saboori, A.; Iuliano, L.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 31:(2024), pp. 1430-1442. [10.1016/j.jmrt.2024.06.167] | 1-gen-2024 | Talebi, M.Saboori, A.Iuliano, L. + | 1-s2.0-S2238785424014789-main.pdf |