LUNETTO, VINCENZO
LUNETTO, VINCENZO
Dipartimento di Ingegneria Gestionale e della Produzione
041437
Active and Passive Filling Stir Repairing of AISI 304 Alloy
2024 Lunetto, Vincenzo; Basile, Dario; Razza, Valentino; RUSSO SPENA, Pasquale
Friction stir welding of additively manufactured A20X aluminum alloy: welding process, mechanical properties, and microstructure
2024 Abankar, Mohammad; Lunetto, Vincenzo; De Maddis, Manuela; Russo Spena, Pasquale
Friction stir welding of laser-powder bed fusion A20X: microstructure and mechanical properties
2024 Abankar, Mohammad; Lunetto, Vincenzo; De Maddis, Manuela; Lombardi, Franco; Razza, Valentino; Russo Spena, Pasquale
Microstructures and mechanical properties of friction stir welded additively manufactured Scalmalloy®
2024 Mirandola, Pietro; Novel, David; Perini, Matteo; Benedetti, Matteo; Lombardi, Franco; Lunetto, Vincenzo; Spena, Pasquale Russo
Non-destructive detection and analysis of weld defects in dissimilar pulsed GMAW and FSW joints of aluminium castings and plates through 3D X-ray computed tomography
2024 Orlando, Mattia; De Maddis, Manuela; Razza, Valentino; Lunetto, Vincenzo
Pre-hole friction stir spot welding of dual-phase steels and comparison with resistance spot welding, conventional and pinless friction stir spot welding
2023 Lunetto, Vincenzo; De Maddis, Manuela; Russo Spena, Pasquale
Similar and dissimilar lap friction stir welding of titanium alloys: on the elimination of the hook defect
2023 Lunetto, Vincenzo; DE MADDIS, Manuela; RUSSO SPENA, Pasquale
Strength and microstructure of friction stir welded additively manufactured Scalmalloy® in as-welded and heat-treated conditions
2023 Mirandola, Pietro; Lunetto, Vincenzo; Novel, David; Barozzi, Mario; Bellutti, Pierluigi; De Maddis, Manuela; Russo Spena, Pasquale
Sustainability in the manufacturing of composite materials: A literature review and directions for future research
2023 Lunetto, Vincenzo; Galati, Manuela; Settineri, Luca; Iuliano, Luca
A structured comparison of decentralized additive manufacturing centers based on quality and sustainability
2022 Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Catalano, Angioletta R.; Priarone, Paolo C.
Infrared Thermography for Investigation of Surface Quality in Dry Finish Turning of Ti6Al4V
2022 De Maddis, M.; Lunetto, V.; Razza, V.; Russo Spena, P.
Methodology for Commodity Cost Estimation Through Production Line Analysis and Simulation
2022 Faveto, Alberto; Serio, Francesco; Lunetto, Vincenzo; Chiabert, Paolo
Quality and sustainability benchmarking of decentralized additive manufacturing processes
2022 Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Priarone, PAOLO CLAUDIO
Unit process energy consumption analysis and models for electron beam powder bed fusion (EB-PBF): Effects of chamber saturation
2022 Galati, Manuela; Lunetto, Vincenzo; Imbriglio, Luca; Iuliano, Luca; Settineri, Luca
A comparative LCA method for environmentally friendly manufacturing: Additive manufacturing versus Machining case
2021 Lunetto, Vincenzo; Priarone, Paolo C.; Kara, Sami; Settineri, Luca
Additive manufacturing for an urban vehicle prototype: re-design and sustainability implications
2021 Lunetto, Vincenzo; Catalano, Angioletta R.; Priarone, Paolo C.; Salmi, Alessandro; Atzeni, Eleonora; Moos, Sandro; Iuliano, Luca; Settineri, Luca
Energy efficiency and circular economy implications of additive manufacturing
2021 Lunetto, Vincenzo
An appraisal on the sustainability payback of additively manufactured molds with conformal cooling
2020 Davis, William; Lunetto, Vincenzo; Priarone, Paolo C.; Centea, Dan; Settineri, Luca
On the correlation between process parameters and specific energy consumption in fused deposition modelling
2020 Lunetto, V.; Priarone, P. C.; Galati, M.; Minetola, P.
Unit process energy consumption analysis and models for Electron Beam Melting (EBM): Effects of process and part designs
2020 Lunetto, V.; Galati, M.; Settineri, L.; Iuliano, L.
Citazione | Data di pubblicazione | Autori | File |
---|---|---|---|
Active and Passive Filling Stir Repairing of AISI 304 Alloy / Lunetto, Vincenzo; Basile, Dario; Razza, Valentino; RUSSO SPENA, Pasquale. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 14:8(2024). [10.3390/met14080911] | 1-gen-2024 | Vincenzo LunettoDario BasileValentino RazzaPasquale Russo Spena | metals-14-00911_compressed.pdf |
Friction stir welding of additively manufactured A20X aluminum alloy: welding process, mechanical properties, and microstructure / Abankar, Mohammad; Lunetto, Vincenzo; De Maddis, Manuela; Russo Spena, Pasquale. - In: THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 1433-3015. - ELETTRONICO. - (2024). [10.1007/s00170-024-14747-6] | 1-gen-2024 | Abankar, MohammadLunetto, VincenzoDe Maddis, ManuelaRusso Spena, Pasquale | - |
Friction stir welding of laser-powder bed fusion A20X: microstructure and mechanical properties / Abankar, Mohammad; Lunetto, Vincenzo; De Maddis, Manuela; Lombardi, Franco; Razza, Valentino; Russo Spena, Pasquale. - ELETTRONICO. - (2024). [10.3311/PPme.38444] | 1-gen-2024 | Abankar, MohammadLunetto, VincenzoDe Maddis, ManuelaLombardi, FrancoRazza, ValentinoRusso Spena, Pasquale | - |
Microstructures and mechanical properties of friction stir welded additively manufactured Scalmalloy® / Mirandola, Pietro; Novel, David; Perini, Matteo; Benedetti, Matteo; Lombardi, Franco; Lunetto, Vincenzo; Spena, Pasquale Russo. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2024). [10.1007/s00170-024-14237-9] | 1-gen-2024 | Lombardi, FrancoLunetto, VincenzoSpena, Pasquale Russo + | Paper online.pdf |
Non-destructive detection and analysis of weld defects in dissimilar pulsed GMAW and FSW joints of aluminium castings and plates through 3D X-ray computed tomography / Orlando, Mattia; De Maddis, Manuela; Razza, Valentino; Lunetto, Vincenzo. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2024). [10.1007/s00170-024-13576-x] | 1-gen-2024 | Orlando, MattiaDe Maddis, ManuelaRazza, ValentinoLunetto, Vincenzo | s00170-024-13576-x.pdf |
Pre-hole friction stir spot welding of dual-phase steels and comparison with resistance spot welding, conventional and pinless friction stir spot welding / Lunetto, Vincenzo; De Maddis, Manuela; Russo Spena, Pasquale. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2023). [10.1007/s00170-023-12400-2] | 1-gen-2023 | Lunetto, VincenzoDe Maddis, ManuelaRusso Spena, Pasquale | Paper online.pdf |
Similar and dissimilar lap friction stir welding of titanium alloys: on the elimination of the hook defect / Lunetto, Vincenzo; DE MADDIS, Manuela; RUSSO SPENA, Pasquale. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2023). [10.1007/s00170-023-11316-1] | 1-gen-2023 | Vincenzo LunettoManuela De MaddisPasquale Russo Spena | s00170-023-11316-1.pdf; AcceptedManuscript.pdf |
Strength and microstructure of friction stir welded additively manufactured Scalmalloy® in as-welded and heat-treated conditions / Mirandola, Pietro; Lunetto, Vincenzo; Novel, David; Barozzi, Mario; Bellutti, Pierluigi; De Maddis, Manuela; Russo Spena, Pasquale. - In: JOURNAL OF MANUFACTURING PROCESSES. - ISSN 1526-6125. - ELETTRONICO. - 97:7 July 2023(2023), pp. 1-11. [10.1016/j.jmapro.2023.04.051] | 1-gen-2023 | Lunetto, VincenzoDe Maddis, ManuelaRusso Spena, Pasquale + | Accepted manuscript.pdf; Strength and microstructure of friction stir welded additively manufactured Scalmalloy® in as-welded and heat-treated conditions.pdf |
Sustainability in the manufacturing of composite materials: A literature review and directions for future research / Lunetto, Vincenzo; Galati, Manuela; Settineri, Luca; Iuliano, Luca. - In: JOURNAL OF MANUFACTURING PROCESSES. - ISSN 1526-6125. - ELETTRONICO. - 85:(2023), pp. 858-874. [10.1016/j.jmapro.2022.12.020] | 1-gen-2023 | Lunetto, VincenzoGalati, ManuelaSettineri, LucaIuliano, Luca | 1-s2.0-S1526612522008842-main.pdf; accepted manuscript.pdf |
A structured comparison of decentralized additive manufacturing centers based on quality and sustainability / Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Catalano, Angioletta R.; Priarone, Paolo C.. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - 121:1-2(2022), pp. 993-1014. [10.1007/s00170-022-09288-9] | 1-gen-2022 | Maisano, Domenico A.Verna, ElisaMinetola, PaoloLunetto, VincenzoCatalano, Angioletta R.Priarone, Paolo C. | IJAMT_Maisano2022_Article_AStructuredComparisonOfDecentr.pdf |
Infrared Thermography for Investigation of Surface Quality in Dry Finish Turning of Ti6Al4V / De Maddis, M.; Lunetto, V.; Razza, V.; Russo Spena, P.. - In: METALS. - ISSN 2075-4701. - 12:1(2022), p. 154. [10.3390/met12010154] | 1-gen-2022 | De Maddis M.Lunetto V.Razza V.Russo Spena P. | 2022-METALS.Infrared Thermography for Investigation of Surface Quality in Dry Finish Turning of Ti6Al4V.pdf |
Methodology for Commodity Cost Estimation Through Production Line Analysis and Simulation / Faveto, Alberto; Serio, Francesco; Lunetto, Vincenzo; Chiabert, Paolo. - STAMPA. - 639:(2022), pp. 28-43. (Intervento presentato al convegno 18th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2021 nel 2021) [10.1007/978-3-030-94335-6_3]. | 1-gen-2022 | Alberto, FavetoFrancesco, SerioVincenzo, LunettoPaolo Chiabert | - |
Quality and sustainability benchmarking of decentralized additive manufacturing processes / Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Priarone, PAOLO CLAUDIO. - ELETTRONICO. - (2022). (Intervento presentato al convegno AITeM 2021 - XV Convegno dell’Associazione Italiana Tecnologie Manifatturiere tenutosi a Milano (Italy) nel 17-19 January 2022). | 1-gen-2022 | Domenico A. MaisanoElisa VernaPaolo MinetolaVincenzo LunettoPaolo Claudio Priarone | AITEM2021_Full_Paper_(Final_Version).pdf |
Unit process energy consumption analysis and models for electron beam powder bed fusion (EB-PBF): Effects of chamber saturation / Galati, Manuela; Lunetto, Vincenzo; Imbriglio, Luca; Iuliano, Luca; Settineri, Luca. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 70:(2022), pp. 401-406. (Intervento presentato al convegno The International Conference on Additive Manufacturing for a Better World (AMBW 2022) tenutosi a Singapore nel 23-25 August 2022) [10.1016/j.matpr.2022.09.276]. | 1-gen-2022 | Galati, ManuelaLunetto, VincenzoImbriglio, LucaIuliano, LucaSettineri, Luca | 1-s2.0-S2214785322060965-main.pdf |
A comparative LCA method for environmentally friendly manufacturing: Additive manufacturing versus Machining case / Lunetto, Vincenzo; Priarone, Paolo C.; Kara, Sami; Settineri, Luca. - ELETTRONICO. - 98:(2021), pp. 406-411. (Intervento presentato al convegno 28th CIRP Life Cycle Engineering (LCE) Conference tenutosi a Jaipur (India) nel 10-12 March 2021) [10.1016/j.procir.2021.01.125]. | 1-gen-2021 | Lunetto, VincenzoPriarone, Paolo C.Settineri, Luca + | A comparative LCA method for environmentally friendly manufacturing Additive manufacturing versus Machining case.pdf |
Additive manufacturing for an urban vehicle prototype: re-design and sustainability implications / Lunetto, Vincenzo; Catalano, Angioletta R.; Priarone, Paolo C.; Salmi, Alessandro; Atzeni, Eleonora; Moos, Sandro; Iuliano, Luca; Settineri, Luca. - ELETTRONICO. - 99:(2021), pp. 364-369. (Intervento presentato al convegno 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ’20 tenutosi a Ischia, Gulf of Naples, Italy nel 15-17 July 2020) [10.1016/j.procir.2021.03.104]. | 1-gen-2021 | Lunetto, VincenzoCatalano, Angioletta R.Priarone, Paolo C.Salmi, AlessandroAtzeni, EleonoraMoos, SandroIuliano, LucaSettineri, Luca | Additive manufacturing for an urban vehicle prototype re-design and sustainability implications.pdf |
Energy efficiency and circular economy implications of additive manufacturing / Lunetto, Vincenzo. - (2021 Apr 13), pp. 1-175. | 13-apr-2021 | LUNETTO, VINCENZO | conv_final_phd_thesis_-_vl.pdf; conv_synthesis_final_phd_thesis_-_vl.pdf |
An appraisal on the sustainability payback of additively manufactured molds with conformal cooling / Davis, William; Lunetto, Vincenzo; Priarone, Paolo C.; Centea, Dan; Settineri, Luca. - ELETTRONICO. - 90:(2020), pp. 516-521. (Intervento presentato al convegno 27th CIRP Life Cycle Engineering (LCE) Conference tenutosi a Grenoble, France nel from 13 May 2020 through 15 May 2020) [10.1016/j.procir.2020.01.064]. | 1-gen-2020 | Lunetto, VincenzoPriarone, Paolo C.Settineri, Luca + | Procedia CIRP 90 (2020) 516-521.pdf |
On the correlation between process parameters and specific energy consumption in fused deposition modelling / Lunetto, V.; Priarone, P. C.; Galati, M.; Minetola, P.. - In: JOURNAL OF MANUFACTURING PROCESSES. - ISSN 1526-6125. - ELETTRONICO. - 56:Part A(2020), pp. 1039-1049. [10.1016/j.jmapro.2020.06.002] | 1-gen-2020 | Lunetto V.Priarone P. C.Galati M.Minetola P. | JMP_Revised_Manuscript.pdf; 1-s2.0-S1526612520303753-main.pdf |
Unit process energy consumption analysis and models for Electron Beam Melting (EBM): Effects of process and part designs / Lunetto, V.; Galati, M.; Settineri, L.; Iuliano, L.. - In: ADDITIVE MANUFACTURING. - ISSN 2214-8604. - ELETTRONICO. - 33:(2020), p. 101115. [10.1016/j.addma.2020.101115] | 1-gen-2020 | Lunetto V.Galati M.Settineri L.Iuliano L. | 2020_Lunetto.pdf; Manuscript_Revised_v1.1.pdf |