Archivio Istituzionale della RicercaCALIGNANO, FLAVIANA
CALIGNANO, FLAVIANA
Dipartimento di Ingegneria Gestionale e della Produzione
016587
3D printed lattice metal structures for enhanced heat transfer in latent heat storage systems
2023 Morciano, Matteo; Fasano, Matteo; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Asinari, Pietro; Chiavazzo, Eliodoro; Alberghini, Matteo; Almiento, Mariella
An overview of the impact of additive manufacturing on supply chain, reshoring, and sustainability
2023 Calignano, Flaviana; Mercurio, Vincenza
Experimental Investigation on the Cutting of Additively Manufactured Ti6Al4V with Wire-EDM and the Analytical Modelling of Cutting Speed and Surface Roughness
2023 Galati, M.; Antonioni, P.; Calignano, F.; Atzeni, E.
Mechanical Characterisation and Simulation of the Tensile Behaviour of Polymeric Additively Manufactured Lattice Structures
2023 Bruson, D; Galati, M; Calignano, F; Iuliano, L
Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF)
2023 Martelli, PIETRO ANTONIO; Sivo, Antonio; Calignano, Flaviana; Bassini, Emilio; Biamino, Sara; Ugues, Daniele
Sustainable production of AlSi10Mg parts by laser powder bed fusion process
2023 Mercurio, Vincenza; Calignano, Flaviana; Iuliano, Luca
Design, additive manufacturing, and characterisation of a three-dimensional cross-based fractal structure for shock absorption
2022 Viccica, Marco; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca
Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via Laser Powder Bed Fusion (LPBF)
2022 Bassini, E.; Sivo, A.; Martelli, P. A.; Rajczak, E.; Marchese, G.; Calignano, F; Biamino, S.; Ugues, D.
In situ alloying of AlSi10Mg-5 wt% Ni through laser powder bed fusion and subsequent heat treatment
2022 Jandaghi, Mohammadreza; Aversa, A.; Manfredi, D.; Calignano, F.; Lavagna, L.; Pavese, M.
Investigation of surface shot blasting of AlSi10Mg and Ti6Al4V components produced by powder bed fusion technologies
2022 Calignano, Flaviana; Mercurio, Vincenza; Rizza, Giovanni; Galati, Manuela
Investigation of the influence of process parameters on dimensional accuracy and post-sintering crack formation in ceramic 3D printing for porcelain-based commercial resin
2022 Bove, Alessandro; Tulliani, Jean-Marc; Galati, Manuela; Calignano, Flaviana.
Numerical and experimental investigations of a novel 3D bucklicrystal auxetic structure produced by metal additive manufacturing
2022 Galati, M.; Calignano, F.; Minosi, F.
Photopolymerization of Ceramic Resins by Stereolithography Process: A Review
2022 Bove, A.; Calignano, F.; Galati, M.; Iuliano, L.
Production of Dense Cu-10Sn Part by Laser Powder Bed Fusion with Low Surface Roughness and High Dimensional Accuracy
2022 Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Marola, Silvia; Lombardi, Mariangela; Iuliano, Luca
3D Printing of a Monolithic K/Ka-Band Dual-Circular Polarization Antenna-Feeding Network
2021 Addamo, G.; Lumia, M.; Calignano, F.; Paonessa, F.; Virone, G.; Manfredi, D.; Iuliano, L.; Peverini, O. A.
Effect of the build orientation on the mechanical performance of polymeric parts produced by multi jet fusion and selective laser sintering
2021 Calignano, Flaviana; Giuffrida, Federico; Galati, Manuela
Effetto della pressatura isostatica a caldo (HIP) e del trattamento termico di leghe di Nichel fabbricate via Selective Laser Melting (SLM) = Effect of the Hot Isostatic Pressing (HIP) and heat treatment to nickel-based alloys obtained with Selective Laser Melting (SLM)
2021 Bassini, E.; Sivo, A.; Marchese, G.; Martelli, P.; Calignano, F.; Biamino, S.; Ugues, D.
Enhanced efficiency and reduced side lobe level convex conformal reflectarray
2021 Beccaria, M.; Addamo, G.; Orefice, M.; Peverini, O.; Manfredi, D.; Calignano, F.; Virone, G.; Pirinoli, P.
Failure mode analysis on compression of lattice structures with internal cooling channels produced by laser powder bed fusion
2021 Virgillito, E.; Aversa, A.; Calignano, F.; Lombardi, M.; Manfredi, D.; Ugues, D.; Fino, P.
Optimizing Quality Inspection and Control in Powder Bed Metal Additive Manufacturing: Challenges and Research Directions
2021 DI CATALDO, Santa; Vinco, Sara; Urgese, Gianvito; Calignano, Flaviana; Ficarra, Elisa; Macii, Alberto; Macii, Enrico
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| 3D printed lattice metal structures for enhanced heat transfer in latent heat storage systems / Morciano, Matteo; Fasano, Matteo; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Asinari, Pietro; Chiavazzo, Eliodoro; Alberghini, Matteo; Almiento, Mariella. - In: JOURNAL OF ENERGY STORAGE. - ISSN 2352-152X. - 65:(2023), pp. 1-10. [10.1016/j.est.2023.107350] | 1-gen-2023 | Morciano MatteoFasano MatteoCalignano FlavianaManfredi DiegoAsinari PietroChiavazzo EliodoroAlberghini MatteoAlmiento Mariella | Morcianoetal2022-Main.pdf; 1-s2.0-S2352152X23007478-main.pdf |
| An overview of the impact of additive manufacturing on supply chain, reshoring, and sustainability / Calignano, Flaviana; Mercurio, Vincenza. - In: CLEANER LOGISTICS AND SUPPLY CHAIN. - ISSN 2772-3909. - 7:(2023), p. 100103. [10.1016/j.clscn.2023.100103] | 1-gen-2023 | Flaviana CalignanoVincenza Mercurio | 1-s2.0-S2772390923000124-main.pdf |
| Experimental Investigation on the Cutting of Additively Manufactured Ti6Al4V with Wire-EDM and the Analytical Modelling of Cutting Speed and Surface Roughness / Galati, M.; Antonioni, P.; Calignano, F.; Atzeni, E.. - In: JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING. - ISSN 2504-4494. - ELETTRONICO. - 7:2(2023), pp. 69-87. [10.3390/jmmp7020069] | 1-gen-2023 | Galati M.Antonioni P.Calignano F.Atzeni E. | jmmp-07-00069.pdf |
| Mechanical Characterisation and Simulation of the Tensile Behaviour of Polymeric Additively Manufactured Lattice Structures / Bruson, D; Galati, M; Calignano, F; Iuliano, L. - In: EXPERIMENTAL MECHANICS. - ISSN 0014-4851. - (2023). [10.1007/s11340-023-00976-5] | 1-gen-2023 | Bruson, DGalati, MCalignano, FIuliano, L | s11340-023-00976-5.pdf |
| Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF) / Martelli, PIETRO ANTONIO; Sivo, Antonio; Calignano, Flaviana; Bassini, Emilio; Biamino, Sara; Ugues, Daniele. - In: METALS. - ISSN 2075-4701. - 13:2(2023), p. 210. [10.3390/met13020210] | 1-gen-2023 | Pietro Antonio MartelliAntonio SivoFlaviana CalignanoEmilio BassiniSara BiaminoDaniele Ugues | metals-13-00210-v2(1)_compressed(1).pdf |
| Sustainable production of AlSi10Mg parts by laser powder bed fusion process / Mercurio, Vincenza; Calignano, Flaviana; Iuliano, Luca. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2023). [10.1007/s00170-023-11004-0] | 1-gen-2023 | Mercurio, VincenzaCalignano, FlavianaIuliano, Luca | Sustainable production of AlSi10Mg parts by laser powder bed fusion process.pdf; Manuscript_IJAMT_Rev1.pdf |
| Design, additive manufacturing, and characterisation of a three-dimensional cross-based fractal structure for shock absorption / Viccica, Marco; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca. - In: THIN-WALLED STRUCTURES. - ISSN 0263-8231. - ELETTRONICO. - 181:(2022). [10.1016/j.tws.2022.110106] | 1-gen-2022 | Marco ViccicaManuela GalatiFlaviana CalignanoLuca Iuliano | 1-s2.0-S0263823122006589-main_compressed.pdf; Revised Manuscript.pdf |
| Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via Laser Powder Bed Fusion (LPBF) / Bassini, E.; Sivo, A.; Martelli, P. A.; Rajczak, E.; Marchese, G.; Calignano, F; Biamino, S.; Ugues, D.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - ELETTRONICO. - (2022), p. 164213. [10.1016/j.jallcom.2022.164213] | 1-gen-2022 | Bassini, E.Sivo, A.Martelli, P. A.Rajczak, E.Marchese, G.Calignano, FBiamino, S.Ugues, D. | pagination_JALCOM_164213.pdf; 1-s2.0-S0925838822006041-main.pdf |
| In situ alloying of AlSi10Mg-5 wt% Ni through laser powder bed fusion and subsequent heat treatment / Jandaghi, Mohammadreza; Aversa, A.; Manfredi, D.; Calignano, F.; Lavagna, L.; Pavese, M.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - ELETTRONICO. - 904:(2022), p. 164081. [10.1016/j.jallcom.2022.164081] | 1-gen-2022 | Jandaghi MohammadrezaAversa A.Manfredi D.Calignano F.Lavagna L.Pavese M. | revised manuscript.doc; In situ alloying of AlSi10Mg-5 wt% Ni through laser powder bed fusion.pdf; revised manuscript.pdf |
| Investigation of surface shot blasting of AlSi10Mg and Ti6Al4V components produced by powder bed fusion technologies / Calignano, Flaviana; Mercurio, Vincenza; Rizza, Giovanni; Galati, Manuela. - In: PRECISION ENGINEERING. - ISSN 0141-6359. - (2022). [10.1016/j.precisioneng.2022.07.008] | 1-gen-2022 | Flaviana CalignanoVincenza MercurioGiovanni RizzaManuela Galati | PRECISENG-D-22-00182_R1.pdf; Calignano et al_ Finitura.pdf |
| Investigation of the influence of process parameters on dimensional accuracy and post-sintering crack formation in ceramic 3D printing for porcelain-based commercial resin / Bove, Alessandro; Tulliani, Jean-Marc; Galati, Manuela; Calignano, Flaviana.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9520. - (2022). [10.1007/s40964-022-00363-x] | 1-gen-2022 | Bove, AlessandroTulliani, Jean-MarcGalati, ManuelaCalignano, Flaviana. | Investigation of the influence of process parameters on dimensional accuracy and post‑sintering crack formation in ceramic 3D printing for porcelain‑based commercial resins.pdf; Manuscript_Final.pdf |
| Numerical and experimental investigations of a novel 3D bucklicrystal auxetic structure produced by metal additive manufacturing / Galati, M.; Calignano, F.; Minosi, F.. - In: THIN-WALLED STRUCTURES. - ISSN 0263-8231. - 180:(2022), p. 109850. [10.1016/j.tws.2022.109850] | 1-gen-2022 | Galati M.Calignano F.Minosi F. | 1-s2.0-S0263823122005225-main.pdf |
| Photopolymerization of Ceramic Resins by Stereolithography Process: A Review / Bove, A.; Calignano, F.; Galati, M.; Iuliano, L.. - In: APPLIED SCIENCES. - ISSN 2076-3417. - 12:7(2022), p. 3591. [10.3390/app12073591] | 1-gen-2022 | Bove A.Calignano F.Galati M.Iuliano L. | Bove et al. Rev Ceramico.pdf |
| Production of Dense Cu-10Sn Part by Laser Powder Bed Fusion with Low Surface Roughness and High Dimensional Accuracy / Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Marola, Silvia; Lombardi, Mariangela; Iuliano, Luca. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 15:9(2022), p. 3352. [10.3390/ma15093352] | 1-gen-2022 | Flaviana CalignanoDiego ManfrediMariangela LombardiLuca Iuliano + | Calignano et al_Bronzo.pdf |
| 3D Printing of a Monolithic K/Ka-Band Dual-Circular Polarization Antenna-Feeding Network / Addamo, G.; Lumia, M.; Calignano, F.; Paonessa, F.; Virone, G.; Manfredi, D.; Iuliano, L.; Peverini, O. A.. - In: IEEE ACCESS. - ISSN 2169-3536. - STAMPA. - 9:(2021), pp. 88243-88255. [10.1109/ACCESS.2021.3089826] | 1-gen-2021 | Addamo G.Lumia M.Calignano F.Paonessa F.Virone G.Manfredi D.Iuliano L.Peverini O. A. | 3D_Printing_of_a_Monolithic_K_Ka-Band_Dual-Circular_Polarization_Antenna-Feeding_Network.pdf |
| Effect of the build orientation on the mechanical performance of polymeric parts produced by multi jet fusion and selective laser sintering / Calignano, Flaviana; Giuffrida, Federico; Galati, Manuela. - In: JOURNAL OF MANUFACTURING PROCESSES. - ISSN 1526-6125. - ELETTRONICO. - 65:(2021), pp. 271-282. [10.1016/j.jmapro.2021.03.018] | 1-gen-2021 | Flaviana CalignanoFederico GiuffridaManuela Galati | 1-s2.0-S1526612521001845-main.pdf |
| Effetto della pressatura isostatica a caldo (HIP) e del trattamento termico di leghe di Nichel fabbricate via Selective Laser Melting (SLM) = Effect of the Hot Isostatic Pressing (HIP) and heat treatment to nickel-based alloys obtained with Selective Laser Melting (SLM) / Bassini, E.; Sivo, A.; Marchese, G.; Martelli, P.; Calignano, F.; Biamino, S.; Ugues, D.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - ELETTRONICO. - 113:2(2021), pp. 65-73. | 1-gen-2021 | Bassini E.Sivo A.Marchese G.Martelli P.Calignano F.Biamino S.Ugues D. | ugues.pdf |
| Enhanced efficiency and reduced side lobe level convex conformal reflectarray / Beccaria, M.; Addamo, G.; Orefice, M.; Peverini, O.; Manfredi, D.; Calignano, F.; Virone, G.; Pirinoli, P.. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 11:21(2021), p. 9893. [10.3390/app11219893] | 1-gen-2021 | Beccaria M.Addamo G.Orefice M.Peverini O.Manfredi D.Calignano F.Virone G.Pirinoli P. | applsci-11-09893-v3.pdf |
| Failure mode analysis on compression of lattice structures with internal cooling channels produced by laser powder bed fusion / Virgillito, E.; Aversa, A.; Calignano, F.; Lombardi, M.; Manfredi, D.; Ugues, D.; Fino, P.. - In: ADVANCES IN MANUFACTURING. - ISSN 2095-3127. - ELETTRONICO. - (2021). [10.1007/s40436-021-00348-z] | 1-gen-2021 | Virgillito E.Aversa A.Calignano F.Lombardi M.Manfredi D.Ugues D.Fino P. | 2021_Virgillito_Failure mode analysis on compression of lattice structures with internal cooling channels produced by laser powder bed fusion.pdf |
| Optimizing Quality Inspection and Control in Powder Bed Metal Additive Manufacturing: Challenges and Research Directions / DI CATALDO, Santa; Vinco, Sara; Urgese, Gianvito; Calignano, Flaviana; Ficarra, Elisa; Macii, Alberto; Macii, Enrico. - In: PROCEEDINGS OF THE IEEE. - ISSN 0018-9219. - ELETTRONICO. - 109:4(2021), pp. 326-346. [10.1109/JPROC.2021.3054628] | 1-gen-2021 | Santa Di CataldoSara VincoGianvito UrgeseFlaviana CalignanoElisa FicarraAlberto MaciiEnrico Macii | FINAL VERSION.pdf; 09347446.pdf |