Archivio Istituzionale della RicercaLOMBARDI, MARIANGELA
LOMBARDI, MARIANGELA
Dipartimento Scienza Applicata e Tecnologia
016401
A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective
2024 Thangamani, Geethapriyan; Felicioni, Stefano; Padovano, Elisa; Biamino, Sara; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Bondioli, Federica
Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys
2024 Bhatt, Bhaskaranand; Martucci, Alessandra; Virgillito, Enrico; Gobber, Federico; Bondioli, Federica; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo
Effect of microstructural anisotropy and heat treatment on the corrosion behaviour of additively manufactured Ti-6Al-2Sn-4Zr-6Mo alloy
2024 Martucci, A.; Iannucci, L.; Lombardi, M.; Grassini, S.
Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure
2024 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
Natural and artificial aging behaviour of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion: Strengthening mechanisms and failure analysis
2024 Barode, Jayant; Vayyala, Ashok; Aversa, Alberta; Yang, Luyan; Mayer, Joachim; Fino, Paolo; Lombardi, Mariangela
Processability and Microstructural Evolution of W360 Hot Work Tool Steel by Directed Energy Deposition
2024 Vincic, J.; Aversa, A.; Lombardi, M.; Manfredi, D.
Bespoke multi-step homogenization heat-treatment for a laser powder bed fused AlSi10Mg4Cu alloy synthesized via in-situ alloying
2023 Bosio, F.; Lagalante, I.; Manfredi, D.; Lombardi, M.
Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition
2023 Martucci, Alessandra; Bassini, Emilio; Lombardi, Mariangela
Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M
2023 Martucci, Alessandra; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela
Improvement in the PBF-LB/M processing of the Al-Si-Cu-Mg composition through the use of pre-alloyed powder
2023 Martucci, A; Gobber, F; Aversa, A; Manfredi, D; Fino, P; Lombardi, M
Ongoing Challenges of Laser-Based Powder Bed Fusion Processing of Al Alloys and Potential Solutions from the Literature—A Review
2023 Martucci, Alessandra; Aversa, Alberta; Lombardi, Mariangela
Productivity Enhancement in Directed Energy Deposition: The Oscillating Scanning Strategy Approach
2023 Aversa, A; Carrozza, A; Marchese, G; Felicioni, S; De Chirico, M; Lombardi, M; Bondioli, F; Fino, P
Revisiting heat treatments for additive manufactured parts: a case study of A20X alloy
2023 Barode, Jayant; Vayyala, Ashok; Virgillito, Enrico; Aversa, Alberta; Mayer, Joachim; Fino, Paolo; Lombardi, Mariangela
The effect of powder reuse on the surface chemical composition of the Scalmalloy powder in Powder Bed Fusion – Laser Beam process
2023 Martucci, Alessandra; Tam, Eric L.; Aversa, Alberta; Lombardi, Mariangela; Nyborg, Lars
Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion
2023 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
Evaluation of a Laboratory-Scale Gas-Atomized AlSi10Mg Powder and a Commercial-Grade Counterpart for Laser Powder Bed Fusion Processing
2022 Marinucci, Fabrizio; Aversa, Alberta; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo
Homogenization of an Al alloy processed by laser powder bed fusion in-situ alloying
2022 Bosio, F.; Manfredi, D.; Lombardi, M.
Low-Power Laser Powder Bed Fusion Processing of Scalmalloy®
2022 Martucci, Alessandra; Aversa, Alberta; Manfredi, Diego; Bondioli, Federica; Biamino, Sara; Ugues, Daniele; Lombardi, Mariangela; Fino, Paolo
Production of Dense Cu-10Sn Part by Laser Powder Bed Fusion with Low Surface Roughness and High Dimensional Accuracy
2022 Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Marola, Silvia; Lombardi, Mariangela; Iuliano, Luca
Synergic strategies to improve the PBF-LB/M processability of a cracking-sensitive alloy
2022 Martucci, A; Aversa, A; Bondioli, F; Fino, P; Lombardi, M
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective / Thangamani, Geethapriyan; Felicioni, Stefano; Padovano, Elisa; Biamino, Sara; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Bondioli, Federica. - In: METALS. - ISSN 2075-4701. - 14:8(2024). [10.3390/met14080897] | 1-gen-2024 | Thangamani, GeethapriyanFelicioni, StefanoPadovano, ElisaBiamino, SaraLombardi, MariangelaUgues, DanieleFino, PaoloBondioli, Federica | metals-14-00897-v2.pdf |
| Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys / Bhatt, Bhaskaranand; Martucci, Alessandra; Virgillito, Enrico; Gobber, Federico; Bondioli, Federica; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo. - In: METALS. - ISSN 2075-4701. - 14:1(2024). [10.3390/met14010017] | 1-gen-2024 | Bhaskaranand BhattAlessandra MartucciEnrico VirgillitoFederico GobberFederica BondioliDiego ManfrediMariangela LombardiPaolo Fino | metals-14-00017.pdf |
| Effect of microstructural anisotropy and heat treatment on the corrosion behaviour of additively manufactured Ti-6Al-2Sn-4Zr-6Mo alloy / Martucci, A.; Iannucci, L.; Lombardi, M.; Grassini, S.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - ELETTRONICO. - 1008:(2024), pp. 1-9. [10.1016/j.jallcom.2024.176746] | 1-gen-2024 | Martucci A.Iannucci L.Lombardi M.Grassini S. | 1-s2.0-S0925838824033334-main.pdf |
| Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure / Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 17:18(2024). [10.3390/ma17184532] | 1-gen-2024 | Serena LerdaGiulio MarcheseEmilio BassiniMariangela LombardiDaniele UguesPaolo FinoSara Biamino | materials-17-04532.pdf |
| Natural and artificial aging behaviour of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion: Strengthening mechanisms and failure analysis / Barode, Jayant; Vayyala, Ashok; Aversa, Alberta; Yang, Luyan; Mayer, Joachim; Fino, Paolo; Lombardi, Mariangela. - In: MATERIALS TODAY COMMUNICATIONS. - ISSN 2352-4928. - 39:(2024), pp. 1-14. [10.1016/j.mtcomm.2024.108978] | 1-gen-2024 | Barode, JayantAversa, AlbertaFino, PaoloLombardi, Mariangela + | NA+and+AA+2.pdf |
| Processability and Microstructural Evolution of W360 Hot Work Tool Steel by Directed Energy Deposition / Vincic, J.; Aversa, A.; Lombardi, M.; Manfredi, D.. - In: METALS AND MATERIALS INTERNATIONAL. - ISSN 2005-4149. - 30:(2024), pp. 501-516. [10.1007/s12540-023-01508-5] | 1-gen-2024 | Vincic J.Aversa A.Lombardi M.Manfredi D. | s12540-023-01508-5.pdf |
| Bespoke multi-step homogenization heat-treatment for a laser powder bed fused AlSi10Mg4Cu alloy synthesized via in-situ alloying / Bosio, F.; Lagalante, I.; Manfredi, D.; Lombardi, M.. - In: MATERIALS CHARACTERIZATION. - ISSN 1044-5803. - ELETTRONICO. - 195:(2023), p. 112506. [10.1016/j.matchar.2022.112506] | 1-gen-2023 | Bosio F.Lagalante I.Manfredi D.Lombardi M. | Bespoke multi-step homogenization heat-treatment.pdf |
| Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition / Martucci, Alessandra; Bassini, Emilio; Lombardi, Mariangela. - In: METALS. - ISSN 2075-4701. - 13:7(2023). [10.3390/met13071315] | 1-gen-2023 | Alessandra MartucciEmilio BassiniMariangela Lombardi | metals-13-01315-v2.pdf |
| Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M / Martucci, Alessandra; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 13:4(2023). [10.3390/met13040796] | 1-gen-2023 | Alessandra MartucciGiulio MarcheseEmilio BassiniMariangela Lombardi | metals-13-00796+(5)_compressed.pdf |
| Improvement in the PBF-LB/M processing of the Al-Si-Cu-Mg composition through the use of pre-alloyed powder / Martucci, A; Gobber, F; Aversa, A; Manfredi, D; Fino, P; Lombardi, M. - In: MATERIALS RESEARCH EXPRESS. - ISSN 2053-1591. - 10:4(2023), pp. 1-18. [10.1088/2053-1591/acc82f] | 1-gen-2023 | A MartucciF GobberA AversaD ManfrediP FinoM Lombardi | Martucci_2023_Mater._Res._Express_10_046508.pdf |
| Ongoing Challenges of Laser-Based Powder Bed Fusion Processing of Al Alloys and Potential Solutions from the Literature—A Review / Martucci, Alessandra; Aversa, Alberta; Lombardi, Mariangela. - In: MATERIALS. - ISSN 1996-1944. - 16:3(2023), pp. 1-29. [10.3390/ma16031084] | 1-gen-2023 | Alessandra MartucciAlberta AversaMariangela Lombardi | materials-16-01084-v2 (1).pdf |
| Productivity Enhancement in Directed Energy Deposition: The Oscillating Scanning Strategy Approach / Aversa, A; Carrozza, A; Marchese, G; Felicioni, S; De Chirico, M; Lombardi, M; Bondioli, F; Fino, P. - In: METALS AND MATERIALS INTERNATIONAL. - ISSN 1598-9623. - 29:(2023), pp. 2040-2051. [10.1007/s12540-022-01356-9] | 1-gen-2023 | Aversa, ACarrozza, AMarchese, GFelicioni, SLombardi, MBondioli, FFino, P + | s12540-022-01356-9.pdf |
| Revisiting heat treatments for additive manufactured parts: a case study of A20X alloy / Barode, Jayant; Vayyala, Ashok; Virgillito, Enrico; Aversa, Alberta; Mayer, Joachim; Fino, Paolo; Lombardi, Mariangela. - In: MATERIALS & DESIGN. - ISSN 1873-4197. - Volume 225:(2023). [10.1016/j.matdes.2022.111566] | 1-gen-2023 | Jayant BarodeEnrico VirgillitoAlberta AversaPaolo FinoMariangela Lombardi + | Revisiting heat treatment_A20X.pdf |
| The effect of powder reuse on the surface chemical composition of the Scalmalloy powder in Powder Bed Fusion – Laser Beam process / Martucci, Alessandra; Tam, Eric L.; Aversa, Alberta; Lombardi, Mariangela; Nyborg, Lars. - In: SURFACE AND INTERFACE ANALYSIS. - ISSN 0142-2421. - ELETTRONICO. - 55:6-7(2023), pp. 388-395. [10.1002/sia.7176] | 1-gen-2023 | Alessandra MartucciAlberta AversaMariangela Lombardi + | XPS versione finale.pdf; Surface Interface Analysis - 2022 - Martucci - The effect of powder reuse on the surface chemical composition of the.pdf |
| Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion / Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 883:(2023). [10.1016/j.msea.2023.145508] | 1-gen-2023 | Lerda, SerenaMarchese,GiulioBassini, EmilioLombardi, MariangelaUgues, DanieleFino, PaoloBiamino, Sara | Manuscript_Understanding the microstructure and mechanical performance of heat-treated Inconel 625-TiC composite produced by laser powder bed fusion.pdf; 1-s2.0-S0921509323009322-main.pdf |
| Evaluation of a Laboratory-Scale Gas-Atomized AlSi10Mg Powder and a Commercial-Grade Counterpart for Laser Powder Bed Fusion Processing / Marinucci, Fabrizio; Aversa, Alberta; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 15:21(2022), p. 7565. [10.3390/ma15217565] | 1-gen-2022 | Marinucci, FabrizioAversa, AlbertaManfredi, DiegoLombardi, MariangelaFino, Paolo | materials-15-07565.pdf |
| Homogenization of an Al alloy processed by laser powder bed fusion in-situ alloying / Bosio, F.; Manfredi, D.; Lombardi, M.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - 904:(2022), p. 164079. [10.1016/j.jallcom.2022.164079] | 1-gen-2022 | Bosio F.Manfredi D.Lombardi M. | 2022 - Bosio - Homogenization of an Al alloy processed by LPBF in situ alloying.pdf |
| Low-Power Laser Powder Bed Fusion Processing of Scalmalloy® / Martucci, Alessandra; Aversa, Alberta; Manfredi, Diego; Bondioli, Federica; Biamino, Sara; Ugues, Daniele; Lombardi, Mariangela; Fino, Paolo. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 15:9(2022), p. 3123. [10.3390/ma15093123] | 1-gen-2022 | Martucci, AlessandraAversa, AlbertaManfredi, DiegoBondioli, FedericaBiamino, SaraUgues, DanieleLombardi, MariangelaFino, Paolo | materials-15-03123-v2 (1).pdf |
| Production of Dense Cu-10Sn Part by Laser Powder Bed Fusion with Low Surface Roughness and High Dimensional Accuracy / Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Marola, Silvia; Lombardi, Mariangela; Iuliano, Luca. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 15:9(2022), p. 3352. [10.3390/ma15093352] | 1-gen-2022 | Flaviana CalignanoDiego ManfrediMariangela LombardiLuca Iuliano + | Calignano et al_Bronzo.pdf |
| Synergic strategies to improve the PBF-LB/M processability of a cracking-sensitive alloy / Martucci, A; Aversa, A; Bondioli, F; Fino, P; Lombardi, M. - In: MATERIALS & DESIGN. - ISSN 0264-1275. - ELETTRONICO. - 224:(2022), p. 111396. [10.1016/j.matdes.2022.111396] | 1-gen-2022 | A MartucciA AversaF BondioliP FinoM Lombardi | 1-s2.0-S026412752201019X-main (1).pdf |