Ti-6Al-4Zr-2Sn-6Mo alloy is one of the most recent titanium alloys processed using powder bed fusion-laser beam (PBF-LB) technology. This alloy has the potential to replace Ti-6Al-4V in automotive and aerospace applications, given its superior mechanical properties, which are approximately 10% higher in terms of ultimate tensile strength (UTS) and yield strength after appropriate heat treatment. In as-built conditions, the alloy is characterized by the presence of soft orthorhombic alpha '' martensite, necessitating a postprocessing heat treatment to decompose this phase and enhance the mechanical properties of the alloy. Usually, PBFed Ti6246 components undergo an annealing process that transforms the alpha '' martensite into an alpha-beta lamellar microstructure. The primary objective of this research was to develop a solution treatment and aging (STA) heat treatment tailored to the unique microstructure produced by the additive manufacturing process to achieve an ultrafine bilamellar microstructure reinforced by precipitation hardening. This study investigated the effects of various solution temperatures in the alpha-beta field (ranging from 800 to 875 degrees C), cooling media (air and water), and aging time to determine the optimal heat treatment parameters for achieving the desired bilamellar microstructure. For each heat treatment condition, different alpha-beta microstructures were found, varying in terms of the alpha/beta ratio and the size of the primary alpha-phase lamellae. Particular attention was given to how these factors were influenced by increases in solution temperature and how microhardness correlated with the percentage of the metastable beta phase present after quenching. Tensile tests were performed on samples subjected to the most promising heat treatment parameters. A comparison with literature data revealed that the optimized STA treatment enhanced hardness and UTS by 13% and 23%, respectively, compared with those of the annealed alloy. Fracture surface analyses were conducted to investigate fracture mechanisms.

A novel solution treatment and aging for powder bed fusion-laser beam Ti-6Al-2Sn-4Zr-6Mo alloy: Microstructural and mechanical characterization / Pirro, Gianluca; Martucci, Alessandra; Morri, Alessandro; Lombardi, Mariangela; Ceschini, Lorella. - In: INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS. - ISSN 1674-4799. - 32:2(2025), pp. 414-424. [10.1007/s12613-024-3006-5]

A novel solution treatment and aging for powder bed fusion-laser beam Ti-6Al-2Sn-4Zr-6Mo alloy: Microstructural and mechanical characterization

Martucci, Alessandra;Lombardi, Mariangela;
2025

Abstract

Ti-6Al-4Zr-2Sn-6Mo alloy is one of the most recent titanium alloys processed using powder bed fusion-laser beam (PBF-LB) technology. This alloy has the potential to replace Ti-6Al-4V in automotive and aerospace applications, given its superior mechanical properties, which are approximately 10% higher in terms of ultimate tensile strength (UTS) and yield strength after appropriate heat treatment. In as-built conditions, the alloy is characterized by the presence of soft orthorhombic alpha '' martensite, necessitating a postprocessing heat treatment to decompose this phase and enhance the mechanical properties of the alloy. Usually, PBFed Ti6246 components undergo an annealing process that transforms the alpha '' martensite into an alpha-beta lamellar microstructure. The primary objective of this research was to develop a solution treatment and aging (STA) heat treatment tailored to the unique microstructure produced by the additive manufacturing process to achieve an ultrafine bilamellar microstructure reinforced by precipitation hardening. This study investigated the effects of various solution temperatures in the alpha-beta field (ranging from 800 to 875 degrees C), cooling media (air and water), and aging time to determine the optimal heat treatment parameters for achieving the desired bilamellar microstructure. For each heat treatment condition, different alpha-beta microstructures were found, varying in terms of the alpha/beta ratio and the size of the primary alpha-phase lamellae. Particular attention was given to how these factors were influenced by increases in solution temperature and how microhardness correlated with the percentage of the metastable beta phase present after quenching. Tensile tests were performed on samples subjected to the most promising heat treatment parameters. A comparison with literature data revealed that the optimized STA treatment enhanced hardness and UTS by 13% and 23%, respectively, compared with those of the annealed alloy. Fracture surface analyses were conducted to investigate fracture mechanisms.
File in questo prodotto:
File Dimensione Formato  
s12613-024-3006-5.pdf

accesso riservato

Tipologia: 2a Post-print versione editoriale / Version of Record
Licenza: Non Pubblico - Accesso privato/ristretto
Dimensione 2.97 MB
Formato Adobe PDF
2.97 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2996177