Archivio Istituzionale della RicercaD'AMBROSIO, STEFANO
D'AMBROSIO, STEFANO
Dipartimento Energia
003156
A general approach to specific emission evaluation from measured raw emissions in SI engines for conventional and alternative fuels
2003 D'Ambrosio, Stefano; Spessa, Ezio; Vassallo, Alberto
A general Procedure to Calculate Air-Fuel Ratio, Mass Emissions and EGR Mass Fraction from Dyno Data in Diesel and SI Engines
2008 D'Ambrosio, Stefano; Finesso, Roberto; Spessa, Ezio
Analysis Of Cyclic Variability In A Bi-Fuel Engine By Means Of A ‘Cycle-Resolved’ Diagnostic Technique
2005 Baratta, Mirko; D'Ambrosio, Stefano; Spessa, Ezio; Vassallo, Alberto
Analysis of the EGR system performance in modern diesel engines
2012 D'Ambrosio, Stefano; Ferrari, Alessandro; Spessa, Ezio
Cycle-Resolved Detection of Combustion Start in SI Engines by Means Of Different In-Cylinder Pressure Data Reduction Techniques
2006 Baratta, Mirko; D'Ambrosio, Stefano; Spessa, Ezio; Vassallo, Alberto
Effect of the application of an uncooled high-pressure EGR strategy in low-load diesel PCCI operation
2019 D'Ambrosio, S.; Mancarella, A.; Manelli, A.; Salamone, N.
Effects of different piezo injection systems on emissions, fuel consumption and noise in a twin-Stage turbocharged diesel engine
2010 Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Luisi, Sabino; Spessa, Ezio
Effects of H2 addition to CNG blends on cycle-to-cycle and cylinder-to-cylinder combustion variation in an SI engine
2012 Baratta, Mirko; D'Ambrosio, Stefano; Misul, DANIELA ANNA; Spessa, Ezio
Energy Saving and Emission Reduction in NEDC by Hybrid LD Diesel Powertrains
2008 Catania, Andrea; D'Ambrosio, Stefano; Finesso, Roberto; Spessa, Ezio; Paladini, V; Vassallo, A.
Experimental Analysis of Combustion Processes and Emissions in a 2.0L Multi-Cylinder Diesel Engine Featuring a New Generation Piezo-Driven Injector
2009 Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Spessa, Ezio; Avolio, G.; Rampino, V.
Experimental Analysis of Compression Ratio and Injector Nozzle Effects on Performance and Emissions of a PPCI Diesel Engine
2008 Catania, Andrea; D'Ambrosio, Stefano; Finesso, Roberto; Spessa, Ezio
Experimental investigation of fuel consumption, exhaust emissions and heat release of a small-displacement turbocharged CNG engine
2006 D'Ambrosio, Stefano; Spessa, Ezio; Vassallo, Alberto; Ferrera, M; Peletto, C.
Further Investigation of RNG k-Eps Model Capabilities in the Simulation of In-Cylinder Turbulent Flows
2004 Baratta, Mirko; D'Ambrosio, Stefano
High-Boost C.R. Diesel Engine: a Feasibility Study of Performance Enhancement and Exhaust-Gas Power Cogeneration
2002 Catania, Andrea; D'Ambrosio, Stefano; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio
Impact assessment of an intelligent central tire inflation system for passenger cars
2018 D'Ambrosio, Stefano; Mameli, ELIA FRANCESCO; Vitolo, Roberto
Influence of Different Compositions of Natural Gas on Engine Performance
2015 Baratta, Mirko; D'Ambrosio, Stefano; Iemmolo, Daniele; Misul, DANIELA ANNA
Injector Coking Effects on Engine Performance and Emissions
2009 Arpaia, Antonio; Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Luisi, Sabino; Spessa, Ezio
Model-based control of torque and nitrogen oxide emissions in a Euro VI 3.0L diesel engine through model-in-the-loop
2019 Manelli, Andrea; Finesso, Roberto; D'Ambrosio, Stefano; Ventura, Loris
Model-based design of closed loop controllers of the air-path in a heavy duty diesel engine
2019 Ventura, Loris; Finesso, Roberto; Malan, Stefano A.; D'Ambrosio, Stefano; Manelli, Andrea
Multizone diagnostic tools for combustion and emission formation processes in SI and CI engines
2011 Baratta, Mirko; Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| A general approach to specific emission evaluation from measured raw emissions in SI engines for conventional and alternative fuels / D'Ambrosio, Stefano; Spessa, Ezio; Vassallo, Alberto. - ELETTRONICO. - (2003). (Intervento presentato al convegno High-Tech Cars and Engines, 9th HTCES tenutosi a Modena (Italy) nel 29-30 May 2003). | 1-gen-2003 | D'AMBROSIO, StefanoSPESSA, EZIOVASSALLO, Alberto | - |
| A general Procedure to Calculate Air-Fuel Ratio, Mass Emissions and EGR Mass Fraction from Dyno Data in Diesel and SI Engines / D'Ambrosio, Stefano; Finesso, Roberto; Spessa, Ezio. - JSME No. 08-202:(2008), pp. 613-623. (Intervento presentato al convegno Comodia 2008 tenutosi a Sapporo, Japan nel July 28-31, 2008). | 1-gen-2008 | D'AMBROSIO, StefanoFINESSO, ROBERTOSPESSA, EZIO | - |
| Analysis Of Cyclic Variability In A Bi-Fuel Engine By Means Of A ‘Cycle-Resolved’ Diagnostic Technique / Baratta, Mirko; D'Ambrosio, Stefano; Spessa, Ezio; Vassallo, Alberto. - (2005). (Intervento presentato al convegno 2005 Fall Technical Conference of the ASME ICED tenutosi a Ottawa, ON, Canada nel September 11-14, 2005) [10.1115/ICEF2005-1214]. | 1-gen-2005 | BARATTA, MIRKOD'AMBROSIO, StefanoSPESSA, EZIOVASSALLO, Alberto | - |
| Analysis of the EGR system performance in modern diesel engines / D'Ambrosio, Stefano; Ferrari, Alessandro; Spessa, Ezio. - ELETTRONICO. - (2012), pp. 495-509. (Intervento presentato al convegno ASME 2012 Internal Combustion Engine Division Spring Technical Conference, ICES 2012 tenutosi a Torino (Italy) nel May 6-9, 2012) [10.1115/ICES2012-81202]. | 1-gen-2012 | D'AMBROSIO, StefanoFERRARI, AlessandroSPESSA, EZIO | - |
| Cycle-Resolved Detection of Combustion Start in SI Engines by Means Of Different In-Cylinder Pressure Data Reduction Techniques / Baratta, Mirko; D'Ambrosio, Stefano; Spessa, Ezio; Vassallo, Alberto. - (2006). (Intervento presentato al convegno 2006 Spring Technical Conference of the ASME Internal Combustion Engine Division tenutosi a Aachen (Germany) nel May 7-10, 2006) [10.1115/ICES2006-1367]. | 1-gen-2006 | BARATTA, MIRKOD'AMBROSIO, StefanoSPESSA, EZIOVASSALLO, Alberto | - |
| Effect of the application of an uncooled high-pressure EGR strategy in low-load diesel PCCI operation / D'Ambrosio, S.; Mancarella, A.; Manelli, A.; Salamone, N.. - In: AIP CONFERENCE PROCEEDINGS. - ISSN 0094-243X. - ELETTRONICO. - 2191:(2019), p. 020055. (Intervento presentato al convegno 74th Conference of the Italian Thermal Machines Engineering Association, ATI 2019 tenutosi a Department of Engineering "Enzo Ferrari" of the University of Modena and Reggio Emilia, ita nel 2019) [10.1063/1.5138788]. | 1-gen-2019 | D'Ambrosio S.Mancarella A.Manelli A.Salamone N. | 1.5138788.pdf |
| Effects of different piezo injection systems on emissions, fuel consumption and noise in a twin-Stage turbocharged diesel engine / Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Luisi, Sabino; Spessa, Ezio. - ELETTRONICO. - (2010), pp. 1-11. (Intervento presentato al convegno 65° congresso nazionale ATI tenutosi a Domus de Maria (CA) nel 13-17 settembre 2010). | 1-gen-2010 | CATANIA, ANDREAD'AMBROSIO, StefanoFERRARI, AlessandroFINESSO, ROBERTOLUISI, SABINOSPESSA, EZIO | - |
| Effects of H2 addition to CNG blends on cycle-to-cycle and cylinder-to-cylinder combustion variation in an SI engine / Baratta, Mirko; D'Ambrosio, Stefano; Misul, DANIELA ANNA; Spessa, Ezio. - ELETTRONICO. - (2012), pp. 189-202. (Intervento presentato al convegno 2012 Spring Technical Conference of the ASME Internal Combustion Engine Division tenutosi a Torino (Italy) nel May 6-9, 2012) [10.1115/ICES2012-81187]. | 1-gen-2012 | BARATTA, MIRKOD'AMBROSIO, StefanoMISUL, DANIELA ANNASPESSA, EZIO | - |
| Energy Saving and Emission Reduction in NEDC by Hybrid LD Diesel Powertrains / Catania, Andrea; D'Ambrosio, Stefano; Finesso, Roberto; Spessa, Ezio; Paladini, V; Vassallo, A.. - (2008), pp. 1-11. (Intervento presentato al convegno 63° Congresso Nazionale ATI tenutosi a Palermo nel 23-26 settembre 2008). | 1-gen-2008 | CATANIA, ANDREAD'AMBROSIO, StefanoFINESSO, ROBERTOSPESSA, EZIO + | - |
| Experimental Analysis of Combustion Processes and Emissions in a 2.0L Multi-Cylinder Diesel Engine Featuring a New Generation Piezo-Driven Injector / Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Spessa, Ezio; Avolio, G.; Rampino, V.. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - ELETTRONICO. - (2009), pp. 1-12. (Intervento presentato al convegno ICE 2009, 9th International Conference on Engine and Vehicles tenutosi a Capri (NA, Italy) nel September, 13-18 2009) [10.4271/2009-24-0040]. | 1-gen-2009 | CATANIA, ANDREAD'AMBROSIO, StefanoFERRARI, AlessandroFINESSO, ROBERTOSPESSA, EZIO + | - |
| Experimental Analysis of Compression Ratio and Injector Nozzle Effects on Performance and Emissions of a PPCI Diesel Engine / Catania, Andrea; D'Ambrosio, Stefano; Finesso, Roberto; Spessa, Ezio. - ELETTRONICO. - (2008), pp. 1-12. (Intervento presentato al convegno 63° Congresso Nazionale ATI tenutosi a Palermo nel 23-26 settembre 2008). | 1-gen-2008 | CATANIA, ANDREAD'AMBROSIO, StefanoFINESSO, ROBERTOSPESSA, EZIO | - |
| Experimental investigation of fuel consumption, exhaust emissions and heat release of a small-displacement turbocharged CNG engine / D'Ambrosio, Stefano; Spessa, Ezio; Vassallo, Alberto; Ferrera, M; Peletto, C.. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - STAMPA. - 2006-01-0049:(2006), pp. 1-18. (Intervento presentato al convegno SAE 2006 World Congress tenutosi a Detroit, MI, USA nel April 3-6, 2006) [10.4271/2006-01-0049]. | 1-gen-2006 | D'AMBROSIO, StefanoSPESSA, EZIOVASSALLO, Alberto + | - |
| Further Investigation of RNG k-Eps Model Capabilities in the Simulation of In-Cylinder Turbulent Flows / Baratta, Mirko; D'Ambrosio, Stefano. - JSME No. 04-202:(2004), pp. 33-41. (Intervento presentato al convegno COMODIA 2004. 6th International Symposium on Diagn. and Modeling of Combustion in IC Engines tenutosi a Yokohama (Japan) nel August 2-5, 2004). | 1-gen-2004 | BARATTA, MIRKOD'AMBROSIO, Stefano | - |
| High-Boost C.R. Diesel Engine: a Feasibility Study of Performance Enhancement and Exhaust-Gas Power Cogeneration / Catania, Andrea; D'Ambrosio, Stefano; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - STAMPA. - SAE Technical Paper No. 2002-01-2814; SAE SP-1721 'Advanced Concepts and Power Sources':(2002), pp. 1-10. (Intervento presentato al convegno 2002 SAE Powertrain & Fluid Systems Conference tenutosi a San Diego, California nel 21-24 October 2002) [10.4271/2002-01-2814]. | 1-gen-2002 | CATANIA, ANDREAD'AMBROSIO, StefanoMISUL, DANIELA ANNAMITTICA, AntonioSPESSA, EZIO | - |
| Impact assessment of an intelligent central tire inflation system for passenger cars / D'Ambrosio, Stefano; Mameli, ELIA FRANCESCO; Vitolo, Roberto. - ELETTRONICO. - (2018). (Intervento presentato al convegno Proceedings of 7th Transport Research Arena TRA 2018 tenutosi a Vienna (Austria) nel April 16-19, 2018) [10.5281/zenodo.1486718]. | 1-gen-2018 | Stefano d’AmbrosioMAMELI, ELIA FRANCESCORoberto Vitolo | P28_TRA2018_Paper_FINAL.PDF |
| Influence of Different Compositions of Natural Gas on Engine Performance / Baratta, Mirko; D'Ambrosio, Stefano; Iemmolo, Daniele; Misul, DANIELA ANNA. - (2015). (Intervento presentato al convegno ASME-ATI-UIT 2015 Conference on Thermal Energy Systems: Production, Storage, Utilization and the Environment tenutosi a Napoli nel 17 – 20 May, 2015). | 1-gen-2015 | BARATTA, MIRKOD'AMBROSIO, StefanoIEMMOLO, DANIELEMISUL, DANIELA ANNA | - |
| Injector Coking Effects on Engine Performance and Emissions / Arpaia, Antonio; Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Luisi, Sabino; Spessa, Ezio. - ELETTRONICO. - (2009), pp. 229-241. (Intervento presentato al convegno ASME 2009 Internal Combustion Engine Division Fall Technical Conference tenutosi a Lucerne, Switzerland nel September, 27-30 2009) [10.1115/ICEF2009-14094]. | 1-gen-2009 | ARPAIA, ANTONIOCATANIA, ANDREAD'AMBROSIO, StefanoFERRARI, AlessandroLUISI, SABINOSPESSA, EZIO | - |
| Model-based control of torque and nitrogen oxide emissions in a Euro VI 3.0L diesel engine through model-in-the-loop / Manelli, Andrea; Finesso, Roberto; D'Ambrosio, Stefano; Ventura, Loris. - ELETTRONICO. - 2191:(2019), p. 020105. (Intervento presentato al convegno 74° Congresso Nazionale ATI tenutosi a Modena nel 2019) [10.1063/1.5138838]. | 1-gen-2019 | Andrea ManelliRoberto FinessoStefano d'AmbrosioLoris Ventura | ATI2019_pubblicato_manelli.pdf |
| Model-based design of closed loop controllers of the air-path in a heavy duty diesel engine / Ventura, Loris; Finesso, Roberto; Malan, Stefano A.; D'Ambrosio, Stefano; Manelli, Andrea. - ELETTRONICO. - 2191:(2019), p. 020152. (Intervento presentato al convegno 74° Congresso Nazionale ATI tenutosi a Modena nel 2019) [10.1063/1.5138885]. | 1-gen-2019 | Loris VenturaRoberto FinessoStefano A. MalanStefano d'AmbrosioAndrea Manelli | ATI2019_pubbliccato.pdf |
| Multizone diagnostic tools for combustion and emission formation processes in SI and CI engines / Baratta, Mirko; Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio. - ELETTRONICO. - (2011), pp. 1-11. (Intervento presentato al convegno 66° Congresso Nazionale ATI tenutosi a Rende (Cosenza) nel 5-9 Settembre 2011). | 1-gen-2011 | BARATTA, MIRKOCATANIA, ANDREAD'AMBROSIO, StefanoFERRARI, AlessandroFINESSO, ROBERTOMISUL, DANIELA ANNAMITTICA, AntonioSPESSA, EZIO | - |