Archivio Istituzionale della RicercaCATANIA, ANDREA
Improved Pump Unit for an Injection Apparatus of an Internal Combustion Engine
2016 Ferrari, Alessandro; Catania, Andrea
A QUASI-DIMENSIONAL MULTIZONE DIAGNOSTIC MODEL FOR THE ANALYSIS OF THE SPRAY FORMATION, COMBUSTION AND EMISSIONS IN DI DIESEL ENGINES
2012 Catania, Andrea; Finesso, Roberto; Mittica, Antonio; Spessa, Ezio
Assessment of a low-throughput predictive model for indicated cycle, combustion noise and NOx calculation in diesel engines in steady-state and transient operations
2012 Catania, Andrea; Finesso, Roberto; Spessa, Ezio
ASSESSMENT OF THE ZERO-RAIL TECHNOLOGY IN CR SYSTEMS: THE CF INJECTION APPARATUS PATENTED AT POLITECNICO DI TORINO
2012 Catania, Andrea; Ferrari, Alessandro; Mittica, Antonio; Spessa, Ezio
Development of a high-speed two-colour system and its application to in-cylinder diesel combustion temperature and soot measurements with split injections
2012 Diez, A.; Zhao, H.; Carrozzo, Tonio; Catania, Andrea; Spessa, Ezio
DI-CNG injector characterization at small energizing times by means of numerical simulation
2012 Baratta, Mirko; Catania, Andrea; Rapetto, Nicola; Fuerhapter, A.; Gerlich, M.; Zoels, W.
Combustion prediction by a low-throughput model in modern diesel engines
2011 Catania, Andrea; Finesso, Roberto; Spessa, Ezio; Catanese, A.; Landsmann, G.
Diagnostics of mixing process dynamics, combustion and emissions in a Euro V diesel engine
2011 Catania, Andrea; Finesso, Roberto; Spessa, Ezio
Experimental Analysis, Modeling and Control of Volumetric Radial-Piston Pumps
2011 Catania, Andrea; Ferrari, Alessandro
Multidimensional Modeling of Natural Gas Jet and Mixture Formation in Direct Injection Spark Ignition Engines—Development and Validation of a Virtual Injector Model
2011 Baratta, Mirko; Catania, Andrea; Pesce, F. C.
Multizone diagnostic tools for combustion and emission formation processes in SI and CI engines
2011 Baratta, Mirko; Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio
Numerical-Experimental Investigation On Electronically Controlled Fuel Injection Systems For Diesel Engines
2011 Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio
Predictive zero-dimensional combustion model for DI diesel enginefeed-forward control
2011 Catania, Andrea; Finesso, Roberto; Spessa, Ezio
Premixed-diffusive multizone model for combustion diagnostics in conventional and PCCI diesel engines
2011 Baratta, Mirko; Catania, Andrea; Ferrari, Alessandro; Finesso, Roberto; Spessa, Ezio
Real-time calculation of egr rate and intake charge oxygen concentration for misfire detection in diesel engines
2011 Catania, Andrea; Finesso, Roberto; Spessa, Ezio
CNG INJECTOR NOZZLE DESIGN AND FLOW PREDICTION
2010 Baratta, Mirko; Catania, Andrea; Pesce, F. C.
Computational and Experimental Analysis of Direct CNG Injection and Mixture Formation in a SI Research Engine
2010 Baratta, Mirko; Catania, Andrea; Pesce, F. C.
Development and Application of an Advanced Numerical Model for CR Piezo Indirect Acting Injection Systems
2010 Arpaia, Antonio; Catania, Andrea; Ferrari, Alessandro; Spessa, Ezio
Effects of different piezo injection systems on emissions, fuel consumption and noise in a twin-Stage turbocharged diesel engine
2010 Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Luisi, Sabino; Spessa, Ezio
Effects of Rail Pressure, Pilot Scheduling and EGR Rate on Combustion and Emissions in Conventional and PCCI Diesel Engines
2010 Catania, Andrea; D'Ambrosio, Stefano; Finesso, Roberto; Spessa, Ezio
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Improved Pump Unit for an Injection Apparatus of an Internal Combustion Engine / Ferrari, Alessandro; Catania, Andrea. - (2016). | 1-gen-2016 | FERRARI, AlessandroCATANIA, ANDREA | EP2480784B1.pdf |
| A QUASI-DIMENSIONAL MULTIZONE DIAGNOSTIC MODEL FOR THE ANALYSIS OF THE SPRAY FORMATION, COMBUSTION AND EMISSIONS IN DI DIESEL ENGINES / Catania, Andrea; Finesso, Roberto; Mittica, Antonio; Spessa, Ezio. - ELETTRONICO. - (2012), pp. 1-12. (Intervento presentato al convegno 67° Congresso Nazionale ATI tenutosi a Trieste nel 11-14 settembre 2012). | 1-gen-2012 | CATANIA, ANDREAFINESSO, ROBERTOMITTICA, AntonioSPESSA, EZIO | - |
| Assessment of a low-throughput predictive model for indicated cycle, combustion noise and NOx calculation in diesel engines in steady-state and transient operations / Catania, Andrea; Finesso, Roberto; Spessa, Ezio. - ELETTRONICO. - (2012). (Intervento presentato al convegno 2012 Spring Technical Conference of the ASME Internal Combustion Engine Division tenutosi a Torino (Italy) nel May 6-9, 2012). | 1-gen-2012 | CATANIA, ANDREAFINESSO, ROBERTOSPESSA, EZIO | - |
| ASSESSMENT OF THE ZERO-RAIL TECHNOLOGY IN CR SYSTEMS: THE CF INJECTION APPARATUS PATENTED AT POLITECNICO DI TORINO / Catania, Andrea; Ferrari, Alessandro; Mittica, Antonio; Spessa, Ezio. - (2012). (Intervento presentato al convegno 67° Congresso Annuale ATI tenutosi a Trieste (IT) nel Settembre 2012). | 1-gen-2012 | CATANIA, ANDREAFERRARI, AlessandroMITTICA, AntonioSPESSA, EZIO | - |
| Development of a high-speed two-colour system and its application to in-cylinder diesel combustion temperature and soot measurements with split injections / Diez, A.; Zhao, H.; Carrozzo, Tonio; Catania, Andrea; Spessa, Ezio. - In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART D, JOURNAL OF AUTOMOBILE ENGINEERING. - ISSN 0954-4070. - STAMPA. - 226:5(2012), pp. 684-697. [10.1177/0954407011424547] | 1-gen-2012 | CARROZZO, TONIOCATANIA, ANDREASPESSA, EZIO + | - |
| DI-CNG injector characterization at small energizing times by means of numerical simulation / Baratta, Mirko; Catania, Andrea; Rapetto, Nicola; Fuerhapter, A.; Gerlich, M.; Zoels, W.. - (2012). (Intervento presentato al convegno 2012 Spring Technical Conference of the ASME Internal Combustion Engine Division tenutosi a Torino nel May 6-9, 2012). | 1-gen-2012 | BARATTA, MIRKOCATANIA, ANDREARAPETTO, NICOLA + | - |
| Combustion prediction by a low-throughput model in modern diesel engines / Catania, Andrea; Finesso, Roberto; Spessa, Ezio; Catanese, A.; Landsmann, G.. - In: SAE INTERNATIONAL JOURNAL OF ENGINES. - ISSN 1946-3936. - STAMPA. - 4:1(2011), pp. 2106-2123. [10.4271/2011-01-1410] | 1-gen-2011 | CATANIA, ANDREAFINESSO, ROBERTOSPESSA, EZIO + | - |
| Diagnostics of mixing process dynamics, combustion and emissions in a Euro V diesel engine / Catania, Andrea; Finesso, Roberto; Spessa, Ezio. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - ELETTRONICO. - (2011), pp. 1-26. (Intervento presentato al convegno 10th International Conference on Engines & Vehicles tenutosi a Capri, NA, (ITA) nel September, 11-15, 2011) [10.4271/2011-24-0018]. | 1-gen-2011 | CATANIA, ANDREAFINESSO, ROBERTOSPESSA, EZIO | - |
| Experimental Analysis, Modeling and Control of Volumetric Radial-Piston Pumps / Catania, Andrea; Ferrari, Alessandro. - In: JOURNAL OF FLUIDS ENGINEERING. - ISSN 0098-2202. - 133:8(2011), pp. 081103-1-081103-12. [10.1115/1.4004443] | 1-gen-2011 | CATANIA, ANDREAFERRARI, Alessandro | - |
| Multidimensional Modeling of Natural Gas Jet and Mixture Formation in Direct Injection Spark Ignition Engines—Development and Validation of a Virtual Injector Model / Baratta, Mirko; Catania, Andrea; Pesce, F. C.. - In: JOURNAL OF FLUIDS ENGINEERING. - ISSN 0098-2202. - 133:(2011), pp. 041304-1-041304-14. [10.1115/1.4003877] | 1-gen-2011 | BARATTA, MIRKOCATANIA, ANDREA + | - |
| Multizone diagnostic tools for combustion and emission formation processes in SI and CI engines / Baratta, Mirko; Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio. - ELETTRONICO. - (2011), pp. 1-11. (Intervento presentato al convegno 66° Congresso Nazionale ATI tenutosi a Rende (Cosenza) nel 5-9 Settembre 2011). | 1-gen-2011 | BARATTA, MIRKOCATANIA, ANDREAD'AMBROSIO, StefanoFERRARI, AlessandroFINESSO, ROBERTOMISUL, DANIELA ANNAMITTICA, AntonioSPESSA, EZIO | - |
| Numerical-Experimental Investigation On Electronically Controlled Fuel Injection Systems For Diesel Engines / Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio. - ELETTRONICO. - (2011). (Intervento presentato al convegno 66° Congresso Nazionale ATI tenutosi a Rende (Cosenza) nel 5-9 Settembre 2011). | 1-gen-2011 | CATANIA, ANDREAD'AMBROSIO, StefanoFERRARI, AlessandroMISUL, DANIELA ANNAMITTICA, AntonioSPESSA, EZIO | - |
| Predictive zero-dimensional combustion model for DI diesel enginefeed-forward control / Catania, Andrea; Finesso, Roberto; Spessa, Ezio. - In: ENERGY CONVERSION AND MANAGEMENT. - ISSN 0196-8904. - ELETTRONICO. - 52:10(2011), pp. 3159-3175. [10.1016/j.enconman.2011.05.003] | 1-gen-2011 | CATANIA, ANDREAFINESSO, ROBERTOSPESSA, EZIO | - |
| Premixed-diffusive multizone model for combustion diagnostics in conventional and PCCI diesel engines / Baratta, Mirko; Catania, Andrea; Ferrari, Alessandro; Finesso, Roberto; Spessa, Ezio. - In: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. - ISSN 0742-4795. - STAMPA. - 133:10(2011), pp. 102801-1-102801-13. [10.1115/1.4003048] | 1-gen-2011 | BARATTA, MIRKOCATANIA, ANDREAFERRARI, AlessandroFINESSO, ROBERTOSPESSA, EZIO | - |
| Real-time calculation of egr rate and intake charge oxygen concentration for misfire detection in diesel engines / Catania, Andrea; Finesso, Roberto; Spessa, Ezio. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - ELETTRONICO. - (2011), pp. 1-12. (Intervento presentato al convegno 10th International Conference on Engines & Vehicles tenutosi a Capri, NA (ITA) nel September, 11-15, 2011) [10.4271/2011-24-0149]. | 1-gen-2011 | CATANIA, ANDREAFINESSO, ROBERTOSPESSA, EZIO | - |
| CNG INJECTOR NOZZLE DESIGN AND FLOW PREDICTION / Baratta, Mirko; Catania, Andrea; Pesce, F. C.. - (2010). (Intervento presentato al convegno ASME 2010 Internal Combustion Engine Division Fall Technical Conference tenutosi a San Antonio (TX) nel September 12-15, 2010). | 1-gen-2010 | BARATTA, MIRKOCATANIA, ANDREA + | - |
| Computational and Experimental Analysis of Direct CNG Injection and Mixture Formation in a SI Research Engine / Baratta, Mirko; Catania, Andrea; Pesce, F. C.. - ELETTRONICO. - (2010). (Intervento presentato al convegno ASME 2010 Internal Combustion Engine Division Fall Technical Conference tenutosi a San Antonio (TX) nel September 12-15, 2010). | 1-gen-2010 | BARATTA, MIRKOCATANIA, ANDREA + | - |
| Development and Application of an Advanced Numerical Model for CR Piezo Indirect Acting Injection Systems / Arpaia, Antonio; Catania, Andrea; Ferrari, Alessandro; Spessa, Ezio. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - ELETTRONICO. - SAE Technical Paper 2010-01-1503:(2010), pp. 1-31. (Intervento presentato al convegno SAE International Powertrains, Fuels & Lubricants Meeting tenutosi a Rio de Janeiro, Brazil nel May 5-7, 2010) [10.4271/2010-01-1503]. | 1-gen-2010 | ARPAIA, ANTONIOCATANIA, ANDREAFERRARI, AlessandroSPESSA, EZIO | - |
| Effects of different piezo injection systems on emissions, fuel consumption and noise in a twin-Stage turbocharged diesel engine / Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Luisi, Sabino; Spessa, Ezio. - ELETTRONICO. - (2010), pp. 1-11. (Intervento presentato al convegno 65° congresso nazionale ATI tenutosi a Domus de Maria (CA) nel 13-17 settembre 2010). | 1-gen-2010 | CATANIA, ANDREAD'AMBROSIO, StefanoFERRARI, AlessandroFINESSO, ROBERTOLUISI, SABINOSPESSA, EZIO | - |
| Effects of Rail Pressure, Pilot Scheduling and EGR Rate on Combustion and Emissions in Conventional and PCCI Diesel Engines / Catania, Andrea; D'Ambrosio, Stefano; Finesso, Roberto; Spessa, Ezio. - In: SAE INTERNATIONAL JOURNAL OF ENGINES. - ISSN 1946-3936. - STAMPA. - 3:(2010), pp. 773-787. [10.4271/2010-01-1109] | 1-gen-2010 | CATANIA, ANDREAD'AMBROSIO, StefanoFINESSO, ROBERTOSPESSA, EZIO | - |