Archivio Istituzionale della RicercaUGUES, DANIELE
UGUES, DANIELE
Dipartimento Scienza Applicata e Tecnologia
003181
A review on near net shape hot isostatic pressing of metallic materials: For industrial applications
2026 Anwar, Jehanzaib; Bassini, Emilio; Fino, Paolo; Lombardi, Mariangela; Bondioli, Federica; Aristizabal, Miren; Iturriza, Inigo Zubillaga; Biamino, Sara; Ugues, Daniele
Evolution of microstructure and mechanical properties as a consequence of tensile creep strain of NNS-HIPped nickel-based superalloy
2026 Anwar, Jehanzaib; Bassini, Emilio; Marchese, Giulio; Biamino, Sara; Ugues, Daniele
Hot isostatic pressing as a tool for enhancing the diffusion bonding of dissimilar materials using interference fitting as pre-joining technique
2026 Bassini, Emilio; Tringali, Nino; Ugues, Daniele
Influence of atomizing gas and pressure on the metallurgical characteristics and environmental performance of K340 tool steel powder produced by vacuum induction melting inert gas atomization
2026 Kenevisi, Mohammad Saleh; Gobber, Federico Simone; Pashaei, Nazanin; Priarone, Paolo C.; Biamino, Sara; Ugues, Daniele
On the stress rupture behavior and substructural evolution of LPBF-fabricated IN738LC Ni-based superalloy under various heat treatments
2026 Hafezi, M.; Kermanpur, A.; Rezaeian, A.; Hatef, M.; Rabieifar, H.; Marchese, G.; Bassini, E.; Ugues, D.; Biamino, S.
Powder Degradation and Recycling Strategies for Aluminum Alloys in Additive Manufacturing: A Comprehensive Review
2026 Rezaei, Sina; Biamino, Sara; Bondioli, Federica; Ugues, Daniele; Fino, Paolo; Lombardi, Mariangela
VED-dependent HIP densification of PBF-LB Inconel 718: Defect closure thresholds, microstructural homogenization, and nano-mechanical response
2026 Anwar, Jehanzaib; Bassini, Emilio; Cannella, Mattia; Marchese, Giulio; Martucci, Alessandra; Biamino, Sara; Lombardi, Mariangela; Ugues, Daniele
A Multivariate Experimental Design to Investigate the Effect of Different Heat Treatment Procedures and Parameters’ Interactions on the Hardness and Retained Austenite of K340 Cold-work Tool Steel
2025 Kenevisi, Mohammad Saleh; Biamino, Sara; Ugues, Daniele
Aluminum Laser Additive Manufacturing: A Review on Challenges and Opportunities Through the Lens of Sustainability
2025 Yadegari, Mohammad Javad; Martucci, Alessandra; Biamino, Sara; Ugues, Daniele; Montanaro, Laura; Fino, Paolo; Lombardi, Mariangela
Current trends in electron beam and laser powder bed fusion additive manufacturing of copper alloys: Composition, defects, properties, and challenges
2025 Bhatt, Bhaskaranand; Martucci, Alessandra; Biamino, Sara; Ugues, Daniele; Bondioli, Federica; Montanaro, Laura; Lombardi, Mariangela; Fino, Paolo
Effect of single-step hot isostatic pressing & solution treatment on the microstructure of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion
2025 Barode, J.; Bassini, E.; Aversa, A.; D'Isanto, F.; Ugues, D.; Biamino, S.; Lombardi, M.; Fino, P.
On the high-temperature tensile deformation mechanisms of the IN738LC superalloy fabricated by laser powder bed fusion
2025 Hafezi, Mohammad; Kermanpur, Ahmad; Rezaeian, Ahmad; Heydari, Fatemeh; Rabieifar, Hossein; Marchese, Giulio; Bassini, Emilio; Ugues, Daniele; Biamino, Sara
Surface topography and cross-section analysis of K340 cold work tool steel double-tracks deposited by directed energy deposition technique
2025 Kenevisi, Mohammad Saleh; Gobber, Federico Simone; Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio; Biamino, Sara; Ugues, Daniele
The effect of hot isostatic pressing pressure level and solution annealing cooling rate on CM247 LC nickel-based superalloy processed by laser-based powder bed fusion
2025 Martelli, P. A.; Bassini, E.; Ugues, D.
Tool steels and their additive manufacturing for fabrication and repair via PBF and DED processes: techniques, challenges, and applications
2025 Kenevisi, Mohammad Saleh; Gobber, Federico Simone; Fino, Paolo; Lombardi, Mariangela; Bondioli, Federica; Biamino, Sara; Ugues, Daniele
Understanding the processability, microstructure, and mechanical properties of molybdenum processed by electron beam powder bed fusion
2025 Di Sturco, Samuele; Marchese, Giulio; Bondioli, Federica; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective
2024 Thangamani, Geethapriyan; Felicioni, Stefano; Padovano, Elisa; Biamino, Sara; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Bondioli, Federica
Effect of Astroloy powder characteristics on mechanical properties of Powder-HIP components
2024 Galech, U.; Aristizabal, M.; Iturriza, I.; Bassini, E.; Sivo, A.; Ugues, D.
Fatigue strength estimation of net-shape L-PBF Co–Cr–Mo alloy via non-destructive surface measurements
2024 Romano, S.; Peradotto, E.; Beretta, S.; Ugues, D.; Barricelli, L.; Maculotti, G.; Patriarca, L.; Genta, G.
Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure
2024 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| A review on near net shape hot isostatic pressing of metallic materials: For industrial applications / Anwar, J., Bassini, E., Fino, P., Lombardi, M., Bondioli, F., Aristizabal, M., Iturriza, I.Z., Biamino, S., Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 42:(2026), pp. 3663-3684. [10.1016/j.jmrt.2026.03.210] | 1-gen-2026 | Anwar, JehanzaibBassini, EmilioFino, PaoloLombardi, MariangelaBondioli, FedericaBiamino, SaraUgues, Daniele + | Review.pdf |
| Evolution of microstructure and mechanical properties as a consequence of tensile creep strain of NNS-HIPped nickel-based superalloy / Anwar, J., Bassini, E., Marchese, G., Biamino, S., Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 42:(2026), pp. 2826-2837. [10.1016/j.jmrt.2026.03.239] | 1-gen-2026 | Anwar, JehanzaibBassini, EmilioMarchese, GiulioBiamino, SaraUgues, Daniele | Astroloy.pdf |
| Hot isostatic pressing as a tool for enhancing the diffusion bonding of dissimilar materials using interference fitting as pre-joining technique / Bassini, E., Tringali, N., Ugues, D.. - In: POWDER METALLURGY. - ISSN 0032-5899. - ELETTRONICO. - (2026), pp. 1-6. [10.1177/00325899261430114] | 1-gen-2026 | Bassini, EmilioTringali, NinoUgues, Daniele | HIP_2025_diffusion bonding.pdf; bassini-et-al-2026-hot-isostatic-pressing-as-a-tool-for-enhancing-the-diffusion-bonding-of-dissimilar-materials-using.pdf |
| Influence of atomizing gas and pressure on the metallurgical characteristics and environmental performance of K340 tool steel powder produced by vacuum induction melting inert gas atomization / Kenevisi, M.S., Gobber, F.S., Pashaei, N., Priarone, P.C., Biamino, S., Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - STAMPA. - 42:(2026), pp. 8898-8916. [10.1016/j.jmrt.2026.05.147] | 1-gen-2026 | Kenevisi, Mohammad SalehGobber, Federico SimonePashaei, NazaninPriarone, Paolo C.Biamino, SaraUgues, Daniele | - |
| On the stress rupture behavior and substructural evolution of LPBF-fabricated IN738LC Ni-based superalloy under various heat treatments / Hafezi, M., Kermanpur, A., Rezaeian, A., Hatef, M., Rabieifar, H., Marchese, G., Bassini, E., Ugues, D., Biamino, S.. - In: MATERIALS CHARACTERIZATION. - ISSN 1044-5803. - ELETTRONICO. - 240:(2026), pp. 1-17. [10.1016/j.matchar.2026.116807] | 1-gen-2026 | Marchese G.Bassini E.Ugues D.Biamino S. + | stress rupture behaviout IN738LC superalloy_Hafezi et al._c.pdf |
| Powder Degradation and Recycling Strategies for Aluminum Alloys in Additive Manufacturing: A Comprehensive Review / Rezaei, S., Biamino, S., Bondioli, F., Ugues, D., Fino, P., Lombardi, M.. - In: APPLIED SCIENCES. - ISSN 2076-3417. - 16:13(2026), pp. 1-53. [10.3390/app16136822] | 1-gen-2026 | Sina RezaeiSara BiaminoFederica BondioliDaniele UguesPaolo FinoMariangela Lombardi | applsci-16-06822-v2.pdf |
| VED-dependent HIP densification of PBF-LB Inconel 718: Defect closure thresholds, microstructural homogenization, and nano-mechanical response / Anwar, J., Bassini, E., Cannella, M., Marchese, G., Martucci, A., Biamino, S., Lombardi, M., Ugues, D.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - ELETTRONICO. - 1082:(2026), pp. 1-17. [10.1016/j.jallcom.2026.191395] | 1-gen-2026 | Jehanzaib AnwarEmilio BassiniMattia CannellaGiulio MarcheseAlessandra MartucciSara BiaminoMariangela LombardiDaniele Ugues | VED-HIP.pdf |
| A Multivariate Experimental Design to Investigate the Effect of Different Heat Treatment Procedures and Parameters’ Interactions on the Hardness and Retained Austenite of K340 Cold-work Tool Steel / Kenevisi, M.S., Biamino, S., Ugues, D.. - In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. - ISSN 1059-9495. - 34:(2025), pp. 17746-17758. [10.1007/s11665-024-10486-7] | 1-gen-2025 | Kenevisi, Mohammad SalehBiamino, SaraUgues, Daniele | Final paper.pdf; Author_s accepted manuscript.pdf |
| Aluminum Laser Additive Manufacturing: A Review on Challenges and Opportunities Through the Lens of Sustainability / Yadegari, M.J., Martucci, A., Biamino, S., Ugues, D., Montanaro, L., Fino, P., Lombardi, M.. - In: APPLIED SCIENCES. - ISSN 2076-3417. - 15:4(2025). [10.3390/app15042221] | 1-gen-2025 | Yadegari, Mohammad JavadMartucci, AlessandraBiamino, SaraUgues, DanieleMontanaro, LauraFino, PaoloLombardi, Mariangela | applsci-15-02221.pdf |
| Current trends in electron beam and laser powder bed fusion additive manufacturing of copper alloys: Composition, defects, properties, and challenges / Bhatt, B., Martucci, A., Biamino, S., Ugues, D., Bondioli, F., Montanaro, L., Lombardi, M., Fino, P.. - In: MATERIALS & DESIGN. - ISSN 0264-1275. - 253:(2025). [10.1016/j.matdes.2025.113742] | 1-gen-2025 | Bhatt, BhaskaranandMartucci, AlessandraBiamino, SaraUgues, DanieleBondioli, FedericaMontanaro, LauraLombardi, MariangelaFino, Paolo | 1-s2.0-S0264127525001625-main+(1)_compressed.pdf |
| Effect of single-step hot isostatic pressing & solution treatment on the microstructure of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion / Barode, J., Bassini, E., Aversa, A., D'Isanto, F., Ugues, D., Biamino, S., Lombardi, M., Fino, P.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - 1036:(2025). [10.1016/j.jallcom.2025.181817] | 1-gen-2025 | Barode, J.Bassini, E.Aversa, A.D'Isanto, F.Ugues, D.Biamino, S.Lombardi, M.Fino, P. | 1-s2.0-S092583882503378X-main.pdf |
| On the high-temperature tensile deformation mechanisms of the IN738LC superalloy fabricated by laser powder bed fusion / Hafezi, M., Kermanpur, A., Rezaeian, A., Heydari, F., Rabieifar, H., Marchese, G., Bassini, E., Ugues, D., Biamino, S.. - In: MATERIALS CHARACTERIZATION. - ISSN 1044-5803. - 229:(2025). [10.1016/j.matchar.2025.115510] | 1-gen-2025 | Marchese, GiulioBassini, EmilioUgues, DanieleBiamino, Sara + | 1-s2.0-S1044580325007995-main.pdf |
| Surface topography and cross-section analysis of K340 cold work tool steel double-tracks deposited by directed energy deposition technique / Kenevisi, M.S., Gobber, F.S., Maculotti, G., Genta, G., Galetto, M., Biamino, S., Ugues, D.. - In: CIRP - JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY. - ISSN 1755-5817. - 59:(2025), pp. 158-169. [10.1016/j.cirpj.2025.03.011] | 1-gen-2025 | Kenevisi, Mohammad SalehGobber, Federico SimoneMaculotti, GiacomoGenta, GianfrancoGaletto, MaurizioBiamino, SaraUgues, Daniele | Final version.pdf |
| The effect of hot isostatic pressing pressure level and solution annealing cooling rate on CM247 LC nickel-based superalloy processed by laser-based powder bed fusion / Martelli, P.A., Bassini, E., Ugues, D.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - 10:1(2025), pp. 605-618. [10.1007/s40964-024-00645-6] | 1-gen-2025 | Martelli, P. A.Bassini, E.Ugues, D. | s40964-024-00645-6.pdf |
| Tool steels and their additive manufacturing for fabrication and repair via PBF and DED processes: techniques, challenges, and applications / Kenevisi, M.S., Gobber, F.S., Fino, P., Lombardi, M., Bondioli, F., Biamino, S., Ugues, D.. - In: MATERIALS & DESIGN. - ISSN 0264-1275. - 258:(2025). [10.1016/j.matdes.2025.114639] | 1-gen-2025 | Kenevisi, Mohammad SalehGobber, Federico SimoneFino, PaoloLombardi, MariangelaBondioli, FedericaBiamino, SaraUgues, Daniele | Final version_reduced_size.pdf |
| Understanding the processability, microstructure, and mechanical properties of molybdenum processed by electron beam powder bed fusion / Di Sturco, S., Marchese, G., Bondioli, F., Lombardi, M., Ugues, D., Fino, P., Biamino, S.. - In: INTERNATIONAL JOURNAL OF REFRACTORY METALS AND HARD MATERIALS. - ISSN 2213-3917. - ELETTRONICO. - 129:(2025). [10.1016/j.ijrmhm.2025.107091] | 1-gen-2025 | Di Sturco, SamueleMarchese, GiulioBondioli, FedericaLombardi, MariangelaUgues, DanieleFino, PaoloBiamino, Sara | Understanding the processability microstructure and mechanical of Mo by EB_PBF.pdf; Post_printEB_PBF Mo.pdf |
| A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective / Thangamani, G., Felicioni, S., Padovano, E., Biamino, S., Lombardi, M., Ugues, D., Fino, P., Bondioli, F.. - In: METALS. - ISSN 2075-4701. - 14:8(2024). [10.3390/met14080897] | 1-gen-2024 | Thangamani, GeethapriyanFelicioni, StefanoPadovano, ElisaBiamino, SaraLombardi, MariangelaUgues, DanieleFino, PaoloBondioli, Federica | metals-14-00897-v2.pdf |
| Effect of Astroloy powder characteristics on mechanical properties of Powder-HIP components / Galech, U., Aristizabal, M., Iturriza, I., Bassini, E., Sivo, A., Ugues, D.. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 900:(2024). [10.1016/j.msea.2024.146472] | 1-gen-2024 | Bassini, E.Sivo, A.Ugues, D. + | 1-s2.0-S0921509324004039-main.pdf |
| Fatigue strength estimation of net-shape L-PBF Co–Cr–Mo alloy via non-destructive surface measurements / Romano, S., Peradotto, E., Beretta, S., Ugues, D., Barricelli, L., Maculotti, G., Patriarca, L., Genta, G.. - In: INTERNATIONAL JOURNAL OF FATIGUE. - ISSN 0142-1123. - 178:(2024), pp. 1-18. [10.1016/j.ijfatigue.2023.108018] | 1-gen-2024 | Beretta S.Ugues D.Maculotti G.Genta G. + | 2024_Romano_Fatigue_CoCr_L_PBF.pdf |
| Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure / Lerda, S., Marchese, G., Bassini, E., Lombardi, M., Ugues, D., Fino, P., Biamino, S.. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 17:18(2024). [10.3390/ma17184532] | 1-gen-2024 | Serena LerdaGiulio MarcheseEmilio BassiniMariangela LombardiDaniele UguesPaolo FinoSara Biamino | materials-17-04532.pdf |