Archivio Istituzionale della RicercaUGUES, DANIELE
UGUES, DANIELE
Dipartimento Scienza Applicata e Tecnologia
003181
Characterization and validation of a miniaturized steelmaking process for the fabrication of hot work tool steel
In corso di stampa Zago, A; Ugues, Daniele; Rosso, M.
A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective
2024 Thangamani, Geethapriyan; Felicioni, Stefano; Padovano, Elisa; Biamino, Sara; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Bondioli, Federica
A Multivariate Experimental Design to Investigate the Effect of Different Heat Treatment Procedures and Parameters’ Interactions on the Hardness and Retained Austenite of K340 Cold-work Tool Steel
2024 Kenevisi, Mohammad Saleh; Biamino, Sara; Ugues, Daniele
Effect of Astroloy powder characteristics on mechanical properties of Powder-HIP components
2024 Galech, U.; Aristizabal, M.; Iturriza, I.; Bassini, E.; Sivo, A.; Ugues, D.
Fatigue strength estimation of net-shape L-PBF Co–Cr–Mo alloy via non-destructive surface measurements
2024 Romano, S.; Peradotto, E.; Beretta, S.; Ugues, D.; Barricelli, L.; Maculotti, G.; Patriarca, L.; Genta, G.
Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure
2024 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
Processability of K340 Cold Work Tool Steel by Directed Energy Deposition Technique
2024 Kenevisi, Ms; Martelli, Pa; Gobber, Fs; Ugues, D; Biamino, S
Rapid L-PBF printing of IN718 coupled with HIP-quench: A novel approach to manufacture and heat treatment of a nickel-based alloy
2024 Lerda, S.; Bassini, E.; Marchese, G.; Biamino, S.; Ugues, D.
The effect of hot isostatic pressing pressure level and solution annealing cooling rate on CM247 LC nickel-based superalloy processed by laser-based powder bed fusion
2024 Martelli, P. A.; Bassini, E.; Ugues, D.
The effect of solution annealing on additively manufactured and hot isostatically pressed René 80 Ni-based superalloy
2024 Kenevisi, M. S.; Martelli, P. A.; Titonel, I.; Bassini, E.; Marchese, G.; Ugues, D.
The effect of temperature and strain rate on the grain boundary sliding in a CM247 LC Ni-based superalloy processed with laser based powder bed fusion
2024 Martelli, P. A.; Sabirov, I.; Monclus, M. A.; Bassini, E.; Marchese, G.; Ugues, D.
An artificial intelligence classifier for electron beam powder bed fusion as-built surface topographies
2023 Maculotti, G.; Ghibaudo, C.; Genta, G.; Ugues, D.; Galetto, M.
Definition of an optimal solutioning treatment for a Ni-based superalloy processed by Additive Manufacturing
2023 Martelli, P. A.; Kenevisi, M. S.; Bassini, E.; Ugues, D.
Influence of focus offset on the microstructure of an intermetallic gamma-TiAl based alloy produced by electron beam powder bed fusion
2023 Ghibaudo, C; Wartbichler, R; Marchese, G; Clemens, H; Ugues, D; Biamino, S
Information-rich quality controls prediction model based on non-destructive analysis for porosity determination of AISI H13 produced by electron beam melting
2023 Ghibaudo, C; Maculotti, G; Gobber, F; Saboori, A; Galetto, M; Biamino, S; Ugues, D
Iron Diffusion in Electron Beam Melt (EBM) γ-TiAl Based Alloy from the Building Platform: Interface Characterization
2023 Kenevisi, Mohammad Saleh; Ghibaudo, Cristian; Bassini, Emilio; Ugues, Daniele; Marchese, Giulio; Biamino, Sara
Microstructure and heat treatment investigation of Inconel 625/TiC composite produced by Laser Powder Bed Fusion
2023 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF)
2023 Martelli, PIETRO ANTONIO; Sivo, Antonio; Calignano, Flaviana; Bassini, Emilio; Biamino, Sara; Ugues, Daniele
Rapid L-PBF Printing Of IN718 Coupled With HIP-Quench: A Faster Approach To Combine Manufacturing And Heat Treatment In A Nickel-Based Alloy
2023 Bassini, Emilio; A. Martelli, Pietro; Lerda, Serena; Marchese, Giulio; Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio; Biamino, Sara; Ugues, Daniele
Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion
2023 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Characterization and validation of a miniaturized steelmaking process for the fabrication of hot work tool steel / Zago, A; Ugues, Daniele; Rosso, M.. - (In corso di stampa). (Intervento presentato al convegno Tool 2009 Conference tenutosi a Aachen, Germany nel 2nd-4th June 2009). | In corso di stampa | ZAGO AUGUES, Daniele + | - |
| A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective / Thangamani, Geethapriyan; Felicioni, Stefano; Padovano, Elisa; Biamino, Sara; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Bondioli, Federica. - In: METALS. - ISSN 2075-4701. - 14:8(2024). [10.3390/met14080897] | 1-gen-2024 | Thangamani, GeethapriyanFelicioni, StefanoPadovano, ElisaBiamino, SaraLombardi, MariangelaUgues, DanieleFino, PaoloBondioli, Federica | metals-14-00897-v2.pdf |
| A Multivariate Experimental Design to Investigate the Effect of Different Heat Treatment Procedures and Parameters’ Interactions on the Hardness and Retained Austenite of K340 Cold-work Tool Steel / Kenevisi, Mohammad Saleh; Biamino, Sara; Ugues, Daniele. - In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. - ISSN 1059-9495. - (2024). [10.1007/s11665-024-10486-7] | 1-gen-2024 | Kenevisi, Mohammad SalehBiamino, SaraUgues, Daniele | Final paper.pdf; Author_s accepted manuscript.pdf |
| Effect of Astroloy powder characteristics on mechanical properties of Powder-HIP components / Galech, U.; Aristizabal, M.; Iturriza, I.; Bassini, E.; Sivo, A.; Ugues, D.. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 900:(2024). [10.1016/j.msea.2024.146472] | 1-gen-2024 | Bassini, E.Sivo, A.Ugues, D. + | 1-s2.0-S0921509324004039-main.pdf |
| Fatigue strength estimation of net-shape L-PBF Co–Cr–Mo alloy via non-destructive surface measurements / Romano, S.; Peradotto, E.; Beretta, S.; Ugues, D.; Barricelli, L.; Maculotti, G.; Patriarca, L.; Genta, G.. - In: INTERNATIONAL JOURNAL OF FATIGUE. - ISSN 0142-1123. - 178:(2024), pp. 1-18. [10.1016/j.ijfatigue.2023.108018] | 1-gen-2024 | Beretta S.Ugues D.Maculotti G.Genta G. + | 2024_Romano_Fatigue_CoCr_L_PBF.pdf |
| Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure / Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 17:18(2024). [10.3390/ma17184532] | 1-gen-2024 | Serena LerdaGiulio MarcheseEmilio BassiniMariangela LombardiDaniele UguesPaolo FinoSara Biamino | materials-17-04532.pdf |
| Processability of K340 Cold Work Tool Steel by Directed Energy Deposition Technique / Kenevisi, Ms; Martelli, Pa; Gobber, Fs; Ugues, D; Biamino, S. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - 1310:(2024). [10.1088/1757-899x/1310/1/012021] | 1-gen-2024 | Kenevisi, MSMartelli, PAGobber, FSUgues, DBiamino, S | Kenevisi_2024_IOP_Conf._Ser.__Mater._Sci._Eng._1310_012021.pdf |
| Rapid L-PBF printing of IN718 coupled with HIP-quench: A novel approach to manufacture and heat treatment of a nickel-based alloy / Lerda, S.; Bassini, E.; Marchese, G.; Biamino, S.; Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 30:(2024), pp. 6983-6994. [10.1016/j.jmrt.2024.05.128] | 1-gen-2024 | Lerda, S.Bassini, E.Marchese, G.Biamino, S.Ugues, D. | 1-s2.0-S2238785424011682-main.pdf |
| The effect of hot isostatic pressing pressure level and solution annealing cooling rate on CM247 LC nickel-based superalloy processed by laser-based powder bed fusion / Martelli, P. A.; Bassini, E.; Ugues, D.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - (2024). [10.1007/s40964-024-00645-6] | 1-gen-2024 | Martelli, P. A.Bassini, E.Ugues, D. | s40964-024-00645-6.pdf |
| The effect of solution annealing on additively manufactured and hot isostatically pressed René 80 Ni-based superalloy / Kenevisi, M. S.; Martelli, P. A.; Titonel, I.; Bassini, E.; Marchese, G.; Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 33:(2024), pp. 6591-6600. [10.1016/j.jmrt.2024.11.003] | 1-gen-2024 | Kenevisi, M. S.Martelli, P. A.Titonel, I.Bassini, E.Marchese, G.Ugues, D. | Final version.pdf |
| The effect of temperature and strain rate on the grain boundary sliding in a CM247 LC Ni-based superalloy processed with laser based powder bed fusion / Martelli, P. A.; Sabirov, I.; Monclus, M. A.; Bassini, E.; Marchese, G.; Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - 28:January–February 2024(2024), pp. 2466-2477. [10.1016/j.jmrt.2023.12.131] | 1-gen-2024 | Martelli, P. A.Bassini, E.Marchese, G.Ugues, D. + | JMRT-D-23-09825_R1.pdf; 1-s2.0-S2238785423031952-main.pdf |
| An artificial intelligence classifier for electron beam powder bed fusion as-built surface topographies / Maculotti, G.; Ghibaudo, C.; Genta, G.; Ugues, D.; Galetto, M.. - In: CIRP - JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY. - ISSN 1755-5817. - 43:(2023), pp. 129-142. [10.1016/j.cirpj.2023.03.006] | 1-gen-2023 | Maculotti G.Ghibaudo C.Genta G.Ugues D.Galetto M. | 2023_Maculotti_CIRPJ_topo_AM_classifier.pdf; Manuscript_EBM_AI_topo_class_submission_R1.pdf |
| Definition of an optimal solutioning treatment for a Ni-based superalloy processed by Additive Manufacturing / Martelli, P. A.; Kenevisi, M. S.; Bassini, E.; Ugues, D.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - 114:7-8(2023), pp. 28-33. | 1-gen-2023 | Martelli P. A.Kenevisi M. S.Bassini E.Ugues D. | La Metallurgia.pdf |
| Influence of focus offset on the microstructure of an intermetallic gamma-TiAl based alloy produced by electron beam powder bed fusion / Ghibaudo, C; Wartbichler, R; Marchese, G; Clemens, H; Ugues, D; Biamino, S. - In: JOURNAL OF MANUFACTURING PROCESSES. - ISSN 1526-6125. - ELETTRONICO. - 89:(2023), pp. 132-141. [10.1016/j.jmapro.2023.01.061] | 1-gen-2023 | Ghibaudo, CMarchese, GUgues, DBiamino, S + | 2023_Ghibaudo et al_ Influence of FO on microstructure of TiAl alloy produced by EB_PBF_compressed.pdf |
| Information-rich quality controls prediction model based on non-destructive analysis for porosity determination of AISI H13 produced by electron beam melting / Ghibaudo, C; Maculotti, G; Gobber, F; Saboori, A; Galetto, M; Biamino, S; Ugues, D. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - 126:3-4(2023), pp. 1159-1173. [10.1007/s00170-023-11153-2] | 1-gen-2023 | Ghibaudo, CMaculotti, GGobber, FSaboori, AGaletto, MBiamino, SUgues, D | 2023_Ghibaudo_JAMT_H13_porosity.pdf |
| Iron Diffusion in Electron Beam Melt (EBM) γ-TiAl Based Alloy from the Building Platform: Interface Characterization / Kenevisi, Mohammad Saleh; Ghibaudo, Cristian; Bassini, Emilio; Ugues, Daniele; Marchese, Giulio; Biamino, Sara. - In: METALS. - ISSN 2075-4701. - 13:4(2023), pp. 1-12. [10.3390/met13040772] | 1-gen-2023 | Kenevisi, Mohammad SalehGhibaudo, CristianBassini, EmilioUgues, DanieleMarchese, GiulioBiamino, Sara | metals-13-00772.pdf |
| Microstructure and heat treatment investigation of Inconel 625/TiC composite produced by Laser Powder Bed Fusion / Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara. - ELETTRONICO. - (2023). (Intervento presentato al convegno Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023 tenutosi a Lisbon (Portugal) nel 1-4 October 2023) [10.59499/EP235765271]. | 1-gen-2023 | Serena LerdaGiulio MarcheseEmilio BassiniMariangela LombardiDaniele UguesPaolo FinoSara Biamino | 5765271.pdf |
| Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF) / Martelli, PIETRO ANTONIO; Sivo, Antonio; Calignano, Flaviana; Bassini, Emilio; Biamino, Sara; Ugues, Daniele. - In: METALS. - ISSN 2075-4701. - 13:2(2023), p. 210. [10.3390/met13020210] | 1-gen-2023 | Pietro Antonio MartelliAntonio SivoFlaviana CalignanoEmilio BassiniSara BiaminoDaniele Ugues | metals-13-00210-v2(1)_compressed(1).pdf |
| Rapid L-PBF Printing Of IN718 Coupled With HIP-Quench: A Faster Approach To Combine Manufacturing And Heat Treatment In A Nickel-Based Alloy / Bassini, Emilio; A. Martelli, Pietro; Lerda, Serena; Marchese, Giulio; Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio; Biamino, Sara; Ugues, Daniele. - (2023). (Intervento presentato al convegno Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023 tenutosi a Lisbon (Portugal) nel 1-4 October 2023) [10.59499/ep235763076]. | 1-gen-2023 | Bassini, EmilioLerda, SerenaMarchese, GiulioMaculotti, GiacomoGenta, GianfrancoGaletto, MaurizioBiamino, SaraUgues, Daniele + | 2023_Bassini_EPM conference.pdf |
| Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion / Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 883:(2023). [10.1016/j.msea.2023.145508] | 1-gen-2023 | Lerda, SerenaMarchese,GiulioBassini, EmilioLombardi, MariangelaUgues, DanieleFino, PaoloBiamino, Sara | Manuscript_Understanding the microstructure and mechanical performance of heat-treated Inconel 625-TiC composite produced by laser powder bed fusion.pdf; 1-s2.0-S0921509323009322-main.pdf |