BATTIATO, GIUSEPPE
BATTIATO, GIUSEPPE
Dipartimento di Ingegneria Meccanica e Aerospaziale
031879
Advancing Mistuning Identification and Dynamic Modeling of Blisks Through Blade Detuning Tests
2024 Zhou, Biao; Li, Ankang; Battiato, Giuseppe; Berruti, Teresa M.
Experimental studies on the energy dissipation of bolted structures with frictional interfaces: A review
2024 Wang, Yongfeng; Ma, Yanhong; Hong, Jie; Battiato, Giuseppe; Firrone, Christian M.
Nonlinear Vibrations of Low Pressure Turbine Bladed Disks: Tests and Simulations
2024 Usmanov, Umidjon; Battiato, Giuseppe; Firrone, Christian Maria; Conte, Marta; Rosso, Emanuele; D'Ettole, Antonio Giuseppe
Predictive dynamic modeling and analysis of blisks through digital representations constructed upon precise geometry measurements
2024 Zhou, B.; Xie, C.; Battiato, G.; Berruti, T. M.
A Reduction Technique for the Calculation of the Forced Response of Bladed Disks in Presence of Contact Mistuning At Blade Root Joints
2023 Pinto, Valeria; Battiato, Giuseppe; Firrone, Christian Maria
Stress recovery algorithm for reduced order models of mechanical systems in nonlinear dynamic operative conditions
2022 Battiato, Giuseppe; Firrone, Christian M.
Tip-timing measurements of transient vibrations in mistuned bladed disks
2022 Bornassi, S; Battiato, G; Firrone, Cm; Berruti, Tm
A Novel Test Rig for the Basic Nonlinear Characterization of Bolted Joints
2021 Wang, Yf; Ma, Yh; Hong, J; Battiato, G; Firrone, Cm
A Test Rig for the Experimental Investigation on the Nonlinear Dynamics in the Presence of Large Contact Interfaces and Numerical Models Validation
2021 Firrone, Christian Maria; Battiato, Giuseppe
Self-adaptive macroslip array for friction force prediction in contact interfaces with non-conforming meshes
2021 Battiato, Giuseppe
Vibration parameters identification of turbomachinery rotor blades under transient condition using Blade Tip-Timing measurements
2021 Bornassi, S.; Berruti, T. M.; Firrone, C. M.; Battiato, G.
A modal based reduction technique for wide loose interfaces and application to a turbine stator
2020 Battiato, G.; Firrone, C. M.
Modeling the microslip in the flange joint and its effect on the dynamics of a multistage bladed disk assembly
2018 Firrone, CHRISTIAN MARIA; Battiato, Giuseppe; Epureanu, BOGDAN IULIU
Reduced order modeling for multistage bladed disks with friction contacts at the flange joint
2018 Battiato, Giuseppe; Firrone, Christian M.; Berruti, Teresa M.; Epureanu, BOGDAN IULIU
Reduction and coupling of substructures via Gram–Schmidt Interface modes
2018 Battiato, G.; Firrone, C. M.; Berruti, T. M.; Epureanu, B. I.
Forced response of rotating bladed disks: Blade Tip-Timing measurements
2017 Battiato, Giuseppe; Firrone, CHRISTIAN MARIA; Berruti, TERESA MARIA
Synchronous vibration parameters identification by tip timing measurements
2017 Rigosi, Giovanni; Battiato, Giuseppe; Berruti, TERESA MARIA
Citazione | Data di pubblicazione | Autori | File |
---|---|---|---|
Advancing Mistuning Identification and Dynamic Modeling of Blisks Through Blade Detuning Tests / Zhou, Biao; Li, Ankang; Battiato, Giuseppe; Berruti, Teresa M.. - In: JOURNAL OF PROPULSION AND POWER. - ISSN 0748-4658. - (2024), pp. -12. [10.2514/1.b39365] | 1-gen-2024 | Zhou, BiaoBattiato, GiuseppeBerruti, Teresa M. + | JPP_2024_preprints (1)-1-11.pdf; JPP_2024_preprints (1)_compressed (1)-12-25.pdf |
Experimental studies on the energy dissipation of bolted structures with frictional interfaces: A review / Wang, Yongfeng; Ma, Yanhong; Hong, Jie; Battiato, Giuseppe; Firrone, Christian M.. - In: FRICTION. - ISSN 2223-7690. - ELETTRONICO. - 12:(2024). [10.1007/s40544-023-0809-8] | 1-gen-2024 | Battiato, GiuseppeFirrone, Christian M. + | Experimental-studies-on-the-energy-dissipation-of-bolted-structures-with-frictional-interfaces-A-reviewFriction_compressed.pdf |
Nonlinear Vibrations of Low Pressure Turbine Bladed Disks: Tests and Simulations / Usmanov, Umidjon; Battiato, Giuseppe; Firrone, Christian Maria; Conte, Marta; Rosso, Emanuele; D'Ettole, Antonio Giuseppe. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 14:22(2024). [10.3390/app142210597] | 1-gen-2024 | Usmanov, UmidjonBattiato, GiuseppeFirrone, Christian MariaConte, MartaRosso, EmanueleD'Ettole, Antonio Giuseppe | applsci-14-10597-v3.pdf |
Predictive dynamic modeling and analysis of blisks through digital representations constructed upon precise geometry measurements / Zhou, B.; Xie, C.; Battiato, G.; Berruti, T. M.. - In: MECHANICAL SYSTEMS AND SIGNAL PROCESSING. - ISSN 0888-3270. - 213:(2024). [10.1016/j.ymssp.2024.111357] | 1-gen-2024 | Zhou B.Battiato G.Berruti T. M. + | MSSP23-3511_manuscript_draft.pdf |
A Reduction Technique for the Calculation of the Forced Response of Bladed Disks in Presence of Contact Mistuning At Blade Root Joints / Pinto, Valeria; Battiato, Giuseppe; Firrone, Christian Maria. - In: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. - ISSN 0742-4795. - 145:2(2023). [10.1115/1.4055722] | 1-gen-2023 | Pinto, ValeriaBattiato, GiuseppeFirrone, Christian Maria | gtp_145_02_021013 (1).pdf |
Stress recovery algorithm for reduced order models of mechanical systems in nonlinear dynamic operative conditions / Battiato, Giuseppe; Firrone, Christian M.. - In: NONLINEAR DYNAMICS. - ISSN 1573-269X. - 108:(2022), pp. 1463-1478. [10.1007/s11071-022-07241-9] | 1-gen-2022 | Battiato, GiuseppeFirrone, Christian M. | Battiato-Firrone2022_Article_StressRecoveryAlgorithmForRedu.pdf |
Tip-timing measurements of transient vibrations in mistuned bladed disks / Bornassi, S; Battiato, G; Firrone, Cm; Berruti, Tm. - In: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES. - ISSN 0020-7403. - ELETTRONICO. - 226:(2022), p. 107393. [10.1016/j.ijmecsci.2022.107393] | 1-gen-2022 | Bornassi, SBattiato, GFirrone, CMBerruti, TM | BTT_Paper.pdf; 1-s2.0-S0020740322002983-main.pdf |
A Novel Test Rig for the Basic Nonlinear Characterization of Bolted Joints / Wang, Yf; Ma, Yh; Hong, J; Battiato, G; Firrone, Cm. - In: APPLIED SCIENCES. - ISSN 2076-3417. - 11:12(2021), p. 5613. [10.3390/app11125613] | 1-gen-2021 | Battiato, GFirrone, CM + | A_Novel_Test_Rig_for_the_Basic_Nonlinear_Characterization_of_Bolted_Joints.pdf |
A Test Rig for the Experimental Investigation on the Nonlinear Dynamics in the Presence of Large Contact Interfaces and Numerical Models Validation / Firrone, Christian Maria; Battiato, Giuseppe. - In: JOURNAL OF VIBRATION AND ACOUSTICS. - ISSN 1048-9002. - STAMPA. - 143:3(2021), pp. 031012-1-031012-12. [10.1115/1.4048560] | 1-gen-2021 | Firrone, Christian MariaBattiato, Giuseppe | A Test Rig for the Experimental Investigation on the Nonlinear Dynamics in the Presence of Large Contact Interfaces and Numerical Models Validation.pdf; Accepted manuscript VIB-20-1263 and cover sheet.pdf |
Self-adaptive macroslip array for friction force prediction in contact interfaces with non-conforming meshes / Battiato, Giuseppe. - In: NONLINEAR DYNAMICS. - ISSN 1573-269X. - ELETTRONICO. - (2021). [10.1007/s11071-021-06888-0] | 1-gen-2021 | Giuseppe Battiato | Battiato2021_Article_Self-adaptiveMacroslipArrayFor.pdf |
Vibration parameters identification of turbomachinery rotor blades under transient condition using Blade Tip-Timing measurements / Bornassi, S.; Berruti, T. M.; Firrone, C. M.; Battiato, G.. - In: MEASUREMENT. - ISSN 0263-2241. - ELETTRONICO. - 183:(2021), pp. 1-15. [10.1016/j.measurement.2021.109861] | 1-gen-2021 | Bornassi, S.Berruti, T. M.Firrone, C. M.Battiato, G. | Paper_preprint.pdf; 1-s2.0-S0263224121008022-main.pdf |
A modal based reduction technique for wide loose interfaces and application to a turbine stator / Battiato, G.; Firrone, C. M.. - In: MECHANICAL SYSTEMS AND SIGNAL PROCESSING. - ISSN 0888-3270. - STAMPA. - 139:(2020), pp. 106415-106428. [10.1016/j.ymssp.2019.106415] | 1-gen-2020 | Battiato G.Firrone C. M. | A_model_based_reduction_technique.pdf; A modal based ....pdf |
Modeling the microslip in the flange joint and its effect on the dynamics of a multistage bladed disk assembly / Firrone, CHRISTIAN MARIA; Battiato, Giuseppe; Epureanu, BOGDAN IULIU. - In: JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS. - ISSN 1555-1415. - STAMPA. - 13:1(2018), pp. 011011-1-011011-10. [10.1115/1.4037796] | 1-gen-2018 | Christian Maria FirroneGiuseppe BattiatoBogdan Epureanu | - |
Reduced order modeling for multistage bladed disks with friction contacts at the flange joint / Battiato, Giuseppe; Firrone, Christian M.; Berruti, Teresa M.; Epureanu, BOGDAN IULIU. - In: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. - ISSN 0742-4795. - 140:5(2018), p. 052505. [10.1115/1.4038348] | 1-gen-2018 | Battiato, GiuseppeFirrone, Christian M.Berruti, Teresa M.EPUREANU, BOGDAN IULIU | untitled.pdf |
Reduction and coupling of substructures via Gram–Schmidt Interface modes / Battiato, G.; Firrone, C. M.; Berruti, T. M.; Epureanu, B. I.. - In: COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING. - ISSN 0045-7825. - ELETTRONICO. - (2018), pp. 1-26. [10.1016/j.cma.2018.03.001] | 1-gen-2018 | Battiato, G.Firrone, C. M.Berruti, T. M. + | main.pdf |
Forced response of rotating bladed disks: Blade Tip-Timing measurements / Battiato, Giuseppe; Firrone, CHRISTIAN MARIA; Berruti, TERESA MARIA. - In: MECHANICAL SYSTEMS AND SIGNAL PROCESSING. - ISSN 0888-3270. - ELETTRONICO. - 85:(2017), pp. 912-926. [10.1016/j.ymssp.2016.09.019] | 1-gen-2017 | BATTIATO, GIUSEPPEFIRRONE, CHRISTIAN MARIABERRUTI, TERESA MARIA | Manuscript_Forced response of rotating bladed disks_BTT measurements.pdf; Forced response of rotating bladed disks_ Blade Tip-Timing measurements.pdf |
Synchronous vibration parameters identification by tip timing measurements / Rigosi, Giovanni; Battiato, Giuseppe; Berruti, TERESA MARIA. - In: MECHANICS RESEARCH COMMUNICATIONS. - ISSN 0093-6413. - ELETTRONICO. - (2017). [10.1016/j.mechrescom.2016.10.006] | 1-gen-2017 | BATTIATO, GIUSEPPEBERRUTI, TERESA MARIA + | MRC-D-15-00193.pdf; Synchronous vibration parameters identification by tip timing measurements.pdf |