Archivio Istituzionale della RicercaBATTIATO, GIUSEPPE
BATTIATO, GIUSEPPE
Dipartimento di Ingegneria Meccanica e Aerospaziale
031879
Advancing Mistuning Identification and Dynamic Modeling of Blisks Through Blade Detuning Tests
2024 Zhou, Biao; Li, Ankang; Battiato, Giuseppe; Berruti, Teresa M.
Experimental studies on the energy dissipation of bolted structures with frictional interfaces: A review
2024 Wang, Yongfeng; Ma, Yanhong; Hong, Jie; Battiato, Giuseppe; Firrone, Christian M.
Nonlinear Vibrations of Low Pressure Turbine Bladed Disks: Tests and Simulations
2024 Usmanov, Umidjon; Battiato, Giuseppe; Firrone, Christian Maria; Conte, Marta; Rosso, Emanuele; D'Ettole, Antonio Giuseppe
Predictive dynamic modeling and analysis of blisks through digital representations constructed upon precise geometry measurements
2024 Zhou, B.; Xie, C.; Battiato, G.; Berruti, T. M.
A Reduction Technique for the Calculation of the Forced Response of Bladed Disks in Presence of Contact Mistuning At Blade Root Joints
2023 Pinto, Valeria; Battiato, Giuseppe; Firrone, Christian Maria
REDUCED ORDER MODELS FOR BLADED DISKS WITH CONTACT MISTUNING AT BLADE ROOT JOINTS
2023 Pinto, Valeria; Battiato, Giuseppe; Firrone, Christian M.
A Reduction Technique for the Calculation of the Forced Response of Bladed Disks in Presence of Contact Mistuning At Blade Root Joints
2022 Pinto, Valeria; Battiato, Giuseppe; Firrone, Christian Maria
Influence of the Contact Interfaces on the Dynamics and Power Flow Behavior of the Bolted Structure
2022 Wang, Yongfeng; Ma, Yanhong; Hong, Jie; Battiato, Giuseppe; Firrone, Christian Maria
Stress recovery algorithm for reduced order models of mechanical systems in nonlinear dynamic operative conditions
2022 Battiato, Giuseppe; Firrone, Christian M.
Tip-timing measurements of transient vibrations in mistuned bladed disks
2022 Bornassi, S; Battiato, G; Firrone, Cm; Berruti, Tm
A Novel Test Rig for the Basic Nonlinear Characterization of Bolted Joints
2021 Wang, Yf; Ma, Yh; Hong, J; Battiato, G; Firrone, Cm
A Test Rig for the Experimental Investigation on the Nonlinear Dynamics in the Presence of Large Contact Interfaces and Numerical Models Validation
2021 Firrone, Christian Maria; Battiato, Giuseppe
Self-adaptive macroslip array for friction force prediction in contact interfaces with non-conforming meshes
2021 Battiato, Giuseppe
Vibration parameters identification of turbomachinery rotor blades under transient condition using Blade Tip-Timing measurements
2021 Bornassi, S.; Berruti, T. M.; Firrone, C. M.; Battiato, G.
A modal based reduction technique for wide loose interfaces and application to a turbine stator
2020 Battiato, G.; Firrone, C. M.
A RELIABLE PRE-PROCESSING FOR THE SIMULATION OF FRICTION JOINTS IN TURBOMACHINERIES AND ITS VALIDATION: A CASE STUDY WITH POLICONTACT
2019 Firrone, Cm; Battiato, G
Reduced order modeling of large contact interfaces to calculate the non-linear response of frictionally damped structures
2019 Battiato, G.; Firrone, C. M.
Modeling the microslip in the flange joint and its effect on the dynamics of a multistage bladed disk assembly
2018 Firrone, CHRISTIAN MARIA; Battiato, Giuseppe; Epureanu, BOGDAN IULIU
Reduced order modeling for forced response prediction of structures with large contact interfaces
2018 Battiato, Giuseppe; Firrone, CHRISTIAN MARIA
Reduced order modeling for multistage bladed disks with friction contacts at the flange joint
2018 Battiato, Giuseppe; Firrone, Christian M.; Berruti, Teresa M.; Epureanu, BOGDAN IULIU
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Advancing Mistuning Identification and Dynamic Modeling of Blisks Through Blade Detuning Tests / Zhou, Biao; Li, Ankang; Battiato, Giuseppe; Berruti, Teresa M.. - In: JOURNAL OF PROPULSION AND POWER. - ISSN 0748-4658. - (2024), pp. -12. [10.2514/1.b39365] | 1-gen-2024 | Zhou, BiaoBattiato, GiuseppeBerruti, Teresa M. + | JPP_2024_preprints (1)-1-11.pdf; JPP_2024_preprints (1)_compressed (1)-12-25.pdf |
| Experimental studies on the energy dissipation of bolted structures with frictional interfaces: A review / Wang, Yongfeng; Ma, Yanhong; Hong, Jie; Battiato, Giuseppe; Firrone, Christian M.. - In: FRICTION. - ISSN 2223-7690. - ELETTRONICO. - 12:(2024). [10.1007/s40544-023-0809-8] | 1-gen-2024 | Battiato, GiuseppeFirrone, Christian M. + | Experimental-studies-on-the-energy-dissipation-of-bolted-structures-with-frictional-interfaces-A-reviewFriction_compressed.pdf |
| Nonlinear Vibrations of Low Pressure Turbine Bladed Disks: Tests and Simulations / Usmanov, Umidjon; Battiato, Giuseppe; Firrone, Christian Maria; Conte, Marta; Rosso, Emanuele; D'Ettole, Antonio Giuseppe. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 14:22(2024). [10.3390/app142210597] | 1-gen-2024 | Usmanov, UmidjonBattiato, GiuseppeFirrone, Christian MariaConte, MartaRosso, EmanueleD'Ettole, Antonio Giuseppe | applsci-14-10597-v3.pdf |
| Predictive dynamic modeling and analysis of blisks through digital representations constructed upon precise geometry measurements / Zhou, B.; Xie, C.; Battiato, G.; Berruti, T. M.. - In: MECHANICAL SYSTEMS AND SIGNAL PROCESSING. - ISSN 0888-3270. - 213:(2024). [10.1016/j.ymssp.2024.111357] | 1-gen-2024 | Zhou B.Battiato G.Berruti T. M. + | MSSP23-3511_manuscript_draft.pdf |
| A Reduction Technique for the Calculation of the Forced Response of Bladed Disks in Presence of Contact Mistuning At Blade Root Joints / Pinto, Valeria; Battiato, Giuseppe; Firrone, Christian Maria. - In: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. - ISSN 0742-4795. - 145:2(2023). [10.1115/1.4055722] | 1-gen-2023 | Pinto, ValeriaBattiato, GiuseppeFirrone, Christian Maria | gtp_145_02_021013 (1).pdf |
| REDUCED ORDER MODELS FOR BLADED DISKS WITH CONTACT MISTUNING AT BLADE ROOT JOINTS / Pinto, Valeria; Battiato, Giuseppe; Firrone, Christian M.. - (2023). (Intervento presentato al convegno ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition tenutosi a Boston (USA) nel 25/06/2023 - 30/06/2023) [10.1115/GT2023-103078]. | 1-gen-2023 | Pinto, ValeriaBattiato, GiuseppeFirrone, Christian M. | - |
| A Reduction Technique for the Calculation of the Forced Response of Bladed Disks in Presence of Contact Mistuning At Blade Root Joints / Pinto, Valeria; Battiato, Giuseppe; Firrone, Christian Maria. - 8 - B:(2022). (Intervento presentato al convegno ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition tenutosi a Rotterdam (The Netherlands) nel June 13-17, 2022) [10.1115/GT2022-83289]. | 1-gen-2022 | Pinto, ValeriaBattiato, GiuseppeFirrone, Christian Maria | - |
| Influence of the Contact Interfaces on the Dynamics and Power Flow Behavior of the Bolted Structure / Wang, Yongfeng; Ma, Yanhong; Hong, Jie; Battiato, Giuseppe; Firrone, Christian Maria. - ELETTRONICO. - 8-B:(2022). (Intervento presentato al convegno ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition tenutosi a Rotterdam (NL) nel 13 June 2022 through 17 June 2022) [10.1115/gt2022-82840]. | 1-gen-2022 | Battiato, GiuseppeFirrone, Christian Maria + | - |
| Stress recovery algorithm for reduced order models of mechanical systems in nonlinear dynamic operative conditions / Battiato, Giuseppe; Firrone, Christian M.. - In: NONLINEAR DYNAMICS. - ISSN 1573-269X. - 108:(2022), pp. 1463-1478. [10.1007/s11071-022-07241-9] | 1-gen-2022 | Battiato, GiuseppeFirrone, Christian M. | Battiato-Firrone2022_Article_StressRecoveryAlgorithmForRedu.pdf |
| Tip-timing measurements of transient vibrations in mistuned bladed disks / Bornassi, S; Battiato, G; Firrone, Cm; Berruti, Tm. - In: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES. - ISSN 0020-7403. - ELETTRONICO. - 226:(2022), p. 107393. [10.1016/j.ijmecsci.2022.107393] | 1-gen-2022 | Bornassi, SBattiato, GFirrone, CMBerruti, TM | BTT_Paper.pdf; 1-s2.0-S0020740322002983-main.pdf |
| A Novel Test Rig for the Basic Nonlinear Characterization of Bolted Joints / Wang, Yf; Ma, Yh; Hong, J; Battiato, G; Firrone, Cm. - In: APPLIED SCIENCES. - ISSN 2076-3417. - 11:12(2021), p. 5613. [10.3390/app11125613] | 1-gen-2021 | Battiato, GFirrone, CM + | A_Novel_Test_Rig_for_the_Basic_Nonlinear_Characterization_of_Bolted_Joints.pdf |
| A Test Rig for the Experimental Investigation on the Nonlinear Dynamics in the Presence of Large Contact Interfaces and Numerical Models Validation / Firrone, Christian Maria; Battiato, Giuseppe. - In: JOURNAL OF VIBRATION AND ACOUSTICS. - ISSN 1048-9002. - STAMPA. - 143:3(2021), pp. 031012-1-031012-12. [10.1115/1.4048560] | 1-gen-2021 | Firrone, Christian MariaBattiato, Giuseppe | A Test Rig for the Experimental Investigation on the Nonlinear Dynamics in the Presence of Large Contact Interfaces and Numerical Models Validation.pdf; Accepted manuscript VIB-20-1263 and cover sheet.pdf |
| Self-adaptive macroslip array for friction force prediction in contact interfaces with non-conforming meshes / Battiato, Giuseppe. - In: NONLINEAR DYNAMICS. - ISSN 1573-269X. - ELETTRONICO. - (2021). [10.1007/s11071-021-06888-0] | 1-gen-2021 | Giuseppe Battiato | Battiato2021_Article_Self-adaptiveMacroslipArrayFor.pdf |
| Vibration parameters identification of turbomachinery rotor blades under transient condition using Blade Tip-Timing measurements / Bornassi, S.; Berruti, T. M.; Firrone, C. M.; Battiato, G.. - In: MEASUREMENT. - ISSN 0263-2241. - ELETTRONICO. - 183:(2021), pp. 1-15. [10.1016/j.measurement.2021.109861] | 1-gen-2021 | Bornassi, S.Berruti, T. M.Firrone, C. M.Battiato, G. | Paper_preprint.pdf; 1-s2.0-S0263224121008022-main.pdf |
| A modal based reduction technique for wide loose interfaces and application to a turbine stator / Battiato, G.; Firrone, C. M.. - In: MECHANICAL SYSTEMS AND SIGNAL PROCESSING. - ISSN 0888-3270. - STAMPA. - 139:(2020), pp. 106415-106428. [10.1016/j.ymssp.2019.106415] | 1-gen-2020 | Battiato G.Firrone C. M. | A_model_based_reduction_technique.pdf; A modal based ....pdf |
| A RELIABLE PRE-PROCESSING FOR THE SIMULATION OF FRICTION JOINTS IN TURBOMACHINERIES AND ITS VALIDATION: A CASE STUDY WITH POLICONTACT / Firrone, Cm; Battiato, G. - (2019). (Intervento presentato al convegno ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition tenutosi a Phoenix, Arizona, USA nel Giugno, 17–21, 2019) [10.1115/GT2019-91764]. | 1-gen-2019 | Firrone, CMBattiato, G | v07bt35a025-gt2019-91764.pdf |
| Reduced order modeling of large contact interfaces to calculate the non-linear response of frictionally damped structures / Battiato, G.; Firrone, C. M.. - In: PROCEDIA STRUCTURAL INTEGRITY. - ISSN 2452-3216. - 24:(2019), pp. 837-851. (Intervento presentato al convegno 48th International Conference on Stress Analysis, AIAS 2019 tenutosi a Perugia nel 4 September 2019through 7 September 2019) [10.1016/j.prostr.2020.02.074]. | 1-gen-2019 | Battiato, G.Firrone, C. M. | Reduced_Order_Modeling_of_Large_Contact_Interfaces_to_Calculate_the_Non-linear_Response_of_Frictionally_Damped_Structures.pdf |
| Modeling the microslip in the flange joint and its effect on the dynamics of a multistage bladed disk assembly / Firrone, CHRISTIAN MARIA; Battiato, Giuseppe; Epureanu, BOGDAN IULIU. - In: JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS. - ISSN 1555-1415. - STAMPA. - 13:1(2018), pp. 011011-1-011011-10. [10.1115/1.4037796] | 1-gen-2018 | Christian Maria FirroneGiuseppe BattiatoBogdan Epureanu | - |
| Reduced order modeling for forced response prediction of structures with large contact interfaces / Battiato, Giuseppe; Firrone, CHRISTIAN MARIA. - ELETTRONICO. - (2018), pp. 4063-4074. (Intervento presentato al convegno ISMA2018 - 28th International Conference on Noise and Vibration engineering tenutosi a Leuven (BE) nel 17-19 september 2018). | 1-gen-2018 | Giuseppe BattiatoChristian Maria Firrone | - |
| Reduced order modeling for multistage bladed disks with friction contacts at the flange joint / Battiato, Giuseppe; Firrone, Christian M.; Berruti, Teresa M.; Epureanu, BOGDAN IULIU. - In: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. - ISSN 0742-4795. - 140:5(2018), p. 052505. [10.1115/1.4038348] | 1-gen-2018 | Battiato, GiuseppeFirrone, Christian M.Berruti, Teresa M.EPUREANU, BOGDAN IULIU | untitled.pdf |