Archivio Istituzionale della RicercaFIRRONE, CHRISTIAN MARIA
FIRRONE, CHRISTIAN MARIA
Dipartimento di Ingegneria Meccanica e Aerospaziale
012851
High-frequency nonlinear vibration analysis through low-frequency stereo-camera systems
2025 Botto, D.; Occhipinti, S.; Firrone, C. M.; Neri, P.
Dynamic performance of a novel tuned vibration absorber with nonlinear friction interfaces
2024 Wang, Yongfeng; Ma, Yanhong; Wang, Hong; Firrone, Christian M.; Hong, Jie
Experimental studies on the energy dissipation of bolted structures with frictional interfaces: A review
2024 Wang, Yongfeng; Ma, Yanhong; Hong, Jie; Battiato, Giuseppe; Firrone, Christian M.
A Reduction Technique for the Calculation of the Forced Response of Bladed Disks in Presence of Contact Mistuning At Blade Root Joints
2023 Pinto, Valeria; Battiato, Giuseppe; Firrone, Christian Maria
A test rig for the full characterization of the dynamics of shrouded turbine blades
2023 Ahmed, Rizwan; Maria Firrone, Christian; Zucca, Stefano
Stress recovery algorithm for reduced order models of mechanical systems in nonlinear dynamic operative conditions
2022 Battiato, Giuseppe; Firrone, Christian M.
Tip-timing measurements of transient vibrations in mistuned bladed disks
2022 Bornassi, S; Battiato, G; Firrone, Cm; Berruti, Tm
A Novel Test Rig for the Basic Nonlinear Characterization of Bolted Joints
2021 Wang, Yf; Ma, Yh; Hong, J; Battiato, G; Firrone, Cm
A Test Rig for the Experimental Investigation on the Nonlinear Dynamics in the Presence of Large Contact Interfaces and Numerical Models Validation
2021 Firrone, Christian Maria; Battiato, Giuseppe
Design and Calibration of a Tri-Directional Contact Force Measurement System
2021 Ahmed, Rizwan; Firrone, Christian Maria; Zucca, Stefano
Hybrid Numerical-Experimental Model Update Based on Correlation Approach for Turbine Components
2021 Saeed, Zeeshan; Firrone, Christian M.; Berruti, Teresa
Vibration parameters identification of turbomachinery rotor blades under transient condition using Blade Tip-Timing measurements
2021 Bornassi, S.; Berruti, T. M.; Firrone, C. M.; Battiato, G.
A modal based reduction technique for wide loose interfaces and application to a turbine stator
2020 Battiato, G.; Firrone, C. M.
Experimental Joint Identification Using System Equivalent Model Mixing in a Bladed-Disk
2020 Saeed, Zeeshan; Klaassen, Steven W. B.; Firrone, Christian M.; Berruti, Teresa M.; Rixen, Daniel J.
Joint identification through hybrid models improved by correlations
2020 Saeed, Zeeshan; Firrone, Christian Maria; Berruti, Teresa Maria
Vibration Parameters Estimation by Blade Tip-Timing in Mistuned Bladed Disks in Presence of Close Resonances
2020 Bornassi, Saeid; Firrone, Christian Maria; Berruti, Teresa Maria
Application of Multiple-Scales Method for the Dynamic Modelling of a Gear Coupling
2019 Pipitone, Enrico; Firrone, Christian Maria; Zucca, Stefano
A parametric study of Limit Cycle Oscillation of a bladed disk caused by flutter and friction at the blade root joints
2018 Lassalle, Marco; Firrone, C. M.
Modeling the microslip in the flange joint and its effect on the dynamics of a multistage bladed disk assembly
2018 Firrone, CHRISTIAN MARIA; Battiato, Giuseppe; Epureanu, BOGDAN IULIU
Reduced order modeling for multistage bladed disks with friction contacts at the flange joint
2018 Battiato, Giuseppe; Firrone, Christian M.; Berruti, Teresa M.; Epureanu, BOGDAN IULIU
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| High-frequency nonlinear vibration analysis through low-frequency stereo-camera systems / Botto, D.; Occhipinti, S.; Firrone, C. M.; Neri, P.. - In: MECHANICAL SYSTEMS AND SIGNAL PROCESSING. - ISSN 0888-3270. - ELETTRONICO. - 223:(2025). [10.1016/j.ymssp.2024.111821] | 1-gen-2025 | Botto D.Occhipinti S.Firrone C. M. + | 1-s2.0-S0888327024007192-main.pdf |
| Dynamic performance of a novel tuned vibration absorber with nonlinear friction interfaces / Wang, Yongfeng; Ma, Yanhong; Wang, Hong; Firrone, Christian M.; Hong, Jie. - In: NONLINEAR DYNAMICS. - ISSN 0924-090X. - 112:11(2024), pp. 8831-8848. [10.1007/s11071-024-09347-8] | 1-gen-2024 | Firrone, Christian M. + | Dynamic performance of a novel tuned vibration absorber with nonlinear friction interfaces.pdf |
| Experimental studies on the energy dissipation of bolted structures with frictional interfaces: A review / Wang, Yongfeng; Ma, Yanhong; Hong, Jie; Battiato, Giuseppe; Firrone, Christian M.. - In: FRICTION. - ISSN 2223-7690. - ELETTRONICO. - 12:(2024). [10.1007/s40544-023-0809-8] | 1-gen-2024 | Battiato, GiuseppeFirrone, Christian M. + | Experimental-studies-on-the-energy-dissipation-of-bolted-structures-with-frictional-interfaces-A-reviewFriction_compressed.pdf |
| A Reduction Technique for the Calculation of the Forced Response of Bladed Disks in Presence of Contact Mistuning At Blade Root Joints / Pinto, Valeria; Battiato, Giuseppe; Firrone, Christian Maria. - In: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. - ISSN 0742-4795. - 145:2(2023). [10.1115/1.4055722] | 1-gen-2023 | Pinto, ValeriaBattiato, GiuseppeFirrone, Christian Maria | gtp_145_02_021013 (1).pdf |
| A test rig for the full characterization of the dynamics of shrouded turbine blades / Ahmed, Rizwan; Maria Firrone, Christian; Zucca, Stefano. - In: MECHANICAL SYSTEMS AND SIGNAL PROCESSING. - ISSN 0888-3270. - 189:(2023), p. 110080. [10.1016/j.ymssp.2022.110080] | 1-gen-2023 | Ahmed, RizwanMaria Firrone, ChristianZucca, Stefano | 1-s2.0-S0888327022011487-main.pdf |
| Stress recovery algorithm for reduced order models of mechanical systems in nonlinear dynamic operative conditions / Battiato, Giuseppe; Firrone, Christian M.. - In: NONLINEAR DYNAMICS. - ISSN 1573-269X. - 108:(2022), pp. 1463-1478. [10.1007/s11071-022-07241-9] | 1-gen-2022 | Battiato, GiuseppeFirrone, Christian M. | Battiato-Firrone2022_Article_StressRecoveryAlgorithmForRedu.pdf |
| Tip-timing measurements of transient vibrations in mistuned bladed disks / Bornassi, S; Battiato, G; Firrone, Cm; Berruti, Tm. - In: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES. - ISSN 0020-7403. - ELETTRONICO. - 226:(2022), p. 107393. [10.1016/j.ijmecsci.2022.107393] | 1-gen-2022 | Bornassi, SBattiato, GFirrone, CMBerruti, TM | BTT_Paper.pdf; 1-s2.0-S0020740322002983-main.pdf |
| A Novel Test Rig for the Basic Nonlinear Characterization of Bolted Joints / Wang, Yf; Ma, Yh; Hong, J; Battiato, G; Firrone, Cm. - In: APPLIED SCIENCES. - ISSN 2076-3417. - 11:12(2021), p. 5613. [10.3390/app11125613] | 1-gen-2021 | Battiato, GFirrone, CM + | A_Novel_Test_Rig_for_the_Basic_Nonlinear_Characterization_of_Bolted_Joints.pdf |
| A Test Rig for the Experimental Investigation on the Nonlinear Dynamics in the Presence of Large Contact Interfaces and Numerical Models Validation / Firrone, Christian Maria; Battiato, Giuseppe. - In: JOURNAL OF VIBRATION AND ACOUSTICS. - ISSN 1048-9002. - STAMPA. - 143:3(2021), pp. 031012-1-031012-12. [10.1115/1.4048560] | 1-gen-2021 | Firrone, Christian MariaBattiato, Giuseppe | A Test Rig for the Experimental Investigation on the Nonlinear Dynamics in the Presence of Large Contact Interfaces and Numerical Models Validation.pdf; Accepted manuscript VIB-20-1263 and cover sheet.pdf |
| Design and Calibration of a Tri-Directional Contact Force Measurement System / Ahmed, Rizwan; Firrone, Christian Maria; Zucca, Stefano. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 11:2(2021), p. 877. [10.3390/app11020877] | 1-gen-2021 | Ahmed, RizwanFirrone, Christian MariaZucca, Stefano | applsci-11-00877.pdf |
| Hybrid Numerical-Experimental Model Update Based on Correlation Approach for Turbine Components / Saeed, Zeeshan; Firrone, Christian M.; Berruti, Teresa. - In: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. - ISSN 0742-4795. - ELETTRONICO. - 143:4(2021), p. 041009. [10.1115/1.4049767] | 1-gen-2021 | Saeed, ZeeshanFirrone, Christian M.Berruti, Teresa | GTP-20-1627_Postprint_CCBY_IRIS.pdf; postPrint_Editorial_gtp_143_04_041009.pdf |
| Vibration parameters identification of turbomachinery rotor blades under transient condition using Blade Tip-Timing measurements / Bornassi, S.; Berruti, T. M.; Firrone, C. M.; Battiato, G.. - In: MEASUREMENT. - ISSN 0263-2241. - ELETTRONICO. - 183:(2021), pp. 1-15. [10.1016/j.measurement.2021.109861] | 1-gen-2021 | Bornassi, S.Berruti, T. M.Firrone, C. M.Battiato, G. | Paper_preprint.pdf; 1-s2.0-S0263224121008022-main.pdf |
| A modal based reduction technique for wide loose interfaces and application to a turbine stator / Battiato, G.; Firrone, C. M.. - In: MECHANICAL SYSTEMS AND SIGNAL PROCESSING. - ISSN 0888-3270. - STAMPA. - 139:(2020), pp. 106415-106428. [10.1016/j.ymssp.2019.106415] | 1-gen-2020 | Battiato G.Firrone C. M. | A_model_based_reduction_technique.pdf; A modal based ....pdf |
| Experimental Joint Identification Using System Equivalent Model Mixing in a Bladed-Disk / Saeed, Zeeshan; Klaassen, Steven W. B.; Firrone, Christian M.; Berruti, Teresa M.; Rixen, Daniel J.. - In: JOURNAL OF VIBRATION AND ACOUSTICS. - ISSN 1048-9002. - ELETTRONICO. - 142:5(2020), p. 051001. [10.1115/1.4047361] | 1-gen-2020 | Saeed, ZeeshanFirrone, Christian M.Berruti, Teresa M. + | VIB-20-1072_Postprint_Saeed-Klaassen-Firrone-Berruti-Rixen.pdf; VIB-20-1072_JVA_CorrectCopyright_EditorialLayout_Saeed-Klaassen-Firrone-Berruti-Rixen.pdf |
| Joint identification through hybrid models improved by correlations / Saeed, Zeeshan; Firrone, Christian Maria; Berruti, Teresa Maria. - In: JOURNAL OF SOUND AND VIBRATION. - ISSN 0022-460X. - ELETTRONICO. - 494:3 March 2021(2020), pp. 1-19. [10.1016/j.jsv.2020.115889] | 1-gen-2020 | Saeed, ZeeshanFirrone, Christian MariaBerruti, Teresa Maria | Preprint_00_Manuscript_v1_r2.pdf; 1-s2.0-S0022460X20307288-main.pdf; Postprint_AuthorManuscript_00_Manuscript_JSV_v4_r1.pdf |
| Vibration Parameters Estimation by Blade Tip-Timing in Mistuned Bladed Disks in Presence of Close Resonances / Bornassi, Saeid; Firrone, Christian Maria; Berruti, Teresa Maria. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 10:17(2020), pp. 5930-5945. [10.3390/app10175930] | 1-gen-2020 | Bornassi, SaeidFirrone, Christian MariaBerruti, Teresa Maria | applsci-10-05930.pdf |
| Application of Multiple-Scales Method for the Dynamic Modelling of a Gear Coupling / Pipitone, Enrico; Firrone, Christian Maria; Zucca, Stefano. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 9:6(2019), p. 1225. [10.3390/app9061225] | 1-gen-2019 | PIPITONE, ENRICOFirrone, Christian MariaZucca, Stefano | 2019 - ApplSci.pdf |
| A parametric study of Limit Cycle Oscillation of a bladed disk caused by flutter and friction at the blade root joints / Lassalle, Marco; Firrone, C. M.. - In: JOURNAL OF FLUIDS AND STRUCTURES. - ISSN 0889-9746. - 76:(2018), pp. 349-366. [10.1016/j.jfluidstructs.2017.10.004] | 1-gen-2018 | LASSALLE, MARCOFirrone, C. M. | main.pdf |
| Modeling the microslip in the flange joint and its effect on the dynamics of a multistage bladed disk assembly / Firrone, CHRISTIAN MARIA; Battiato, Giuseppe; Epureanu, BOGDAN IULIU. - In: JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS. - ISSN 1555-1415. - STAMPA. - 13:1(2018), pp. 011011-1-011011-10. [10.1115/1.4037796] | 1-gen-2018 | Christian Maria FirroneGiuseppe BattiatoBogdan Epureanu | - |
| Reduced order modeling for multistage bladed disks with friction contacts at the flange joint / Battiato, Giuseppe; Firrone, Christian M.; Berruti, Teresa M.; Epureanu, BOGDAN IULIU. - In: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. - ISSN 0742-4795. - 140:5(2018), p. 052505. [10.1115/1.4038348] | 1-gen-2018 | Battiato, GiuseppeFirrone, Christian M.Berruti, Teresa M.EPUREANU, BOGDAN IULIU | untitled.pdf |