Archivio Istituzionale della RicercaMARCHIANDI, GIOVANNI
MARCHIANDI, GIOVANNI
002740
Mostra
records
Risultati 1 - 16 di 16 (tempo di esecuzione: 0.028 secondi).
Surface Roughness Measurement in Laser Powder Bed Fusion Manufacturing Process
2023 Mercurio, Vincenza; Calignano, Flaviana; Marchiandi, Giovanni; Iuliano, Luca
Benchmarking analysis of digital light processing resins in terms of dimensional accuracy and geometric tolerances
2022 Stiuso, V.; Minetola, P.; Giubilini, A.; Fontana, L.; Khandpur, M. S.; Rifuggiato, S.; Marchiandi, G.
Build orientation effect on Ti6Al4V thin-wall topography by electron beam powder bed fusion
2022 Maculotti, G.; Piscopo, G.; Marchiandi, G.; Atzeni, E.; Salmi, A.; Iuliano, L.
Proposal of an Innovative Benchmark for the Evaluation of 3D Printing Accuracy for Photopolymers
2022 Minetola, Paolo; de Freitas Pacheco, Vinicius; Massarani, Marcelo; Calignano, Flaviana; Marchiandi, Giovanni
Development of a low-cost monitoring system for open 3d printing
2021 Khandpur, M S; Galati, M; Minetola, P; Marchiandi, G; Fontana, L; Stiuso, V
Effect of track geometry on the measurement uncertainty of wear in pin-on-disc tribological test
2021 Maculotti, G.; Goti, E.; Genta, G.; Marchiandi, G.; Mura, A.; Mazza, L.; Galetto, M.
On the quality of electron beam melted thin-walled parts with curved surfaces
2021 Piscopo, Gabriele; Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca; Marchiandi, Giovanni; Pilagatti, ADRIANO NICOLA; Vecchi, Giuseppe; Poggi, Mirna
Accuracy of down-facing surfaces in complex internal channels produced by laser powder bed fusion (L-PBF)
2020 Calignano, F.; Iuliano, L.; Galati, M.; Minetola, P.; Marchiandi, G.
Mesoscale modelling of laser powder-based directed energy deposition process
2020 Piscopo, G.; Atzeni, E.; Salmi, A.; Iuliano, L.; Gatto, A.; Marchiandi, G.; Balestrucci, A.
Ti-6Al-4V lattice structures produced by EBM: Heat treatment and mechanical properties
2020 Galati, M.; Saboori, A.; Biamino, S.; Calignano, F.; Lombardi, M.; Marchiandi, G.; Minetola, P.; Fino, P.; Iuliano, L.
A methodology for evaluating the aesthetic quality of 3D printed parts
2019 Galati, M.; Minetola, P.; Marchiandi, G.; Atzeni, E.; Calignano, F.; Salmi, A.; Iuliano, L.
Evaluation of the flexural behaviour of 3D printed multimaterial beams
2017 Minetola, Paolo; Iuliano, Luca; Marchiandi, Giovanni
Benchmarking of FDM Machines through Part Quality Using IT Grades
2016 Minetola, Paolo; Iuliano, Luca; Marchiandi, Giovanni
Development of a low cost eye gaze tracker
2009 Bulf, Luca; Fonda, Sergio; Marchiandi, G.; Gatto, Andrea
Reverse Engineering approach for a joystick handgrip re-styling with ergonomic features
2003 Elena, Bassoli; Andrea, Gatto; Iuliano, L.; Marchiandi, G.
Step milling for prototyping of large and precise part
2001 Gatto, A.; Iuliano, L.; Marchiandi, G.
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Surface Roughness Measurement in Laser Powder Bed Fusion Manufacturing Process / Mercurio, Vincenza; Calignano, Flaviana; Marchiandi, Giovanni; Iuliano, Luca. - (2023), pp. 425-433. (Intervento presentato al convegno International Conference on Flexible Automation and Intelligent Manufacturing) [10.1007/978-3-031-38241-3_48]. | 1-gen-2023 | Mercurio, VincenzaCalignano, FlavianaMarchiandi, GiovanniIuliano, Luca | - |
| Benchmarking analysis of digital light processing resins in terms of dimensional accuracy and geometric tolerances / Stiuso, V.; Minetola, P.; Giubilini, A.; Fontana, L.; Khandpur, M. S.; Rifuggiato, S.; Marchiandi, G.. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 62:(2022), pp. 6654-6662. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2022) tenutosi a Madhya Pradesh (India) nel 9-10 aprile 2022) [10.1016/j.matpr.2022.04.658]. | 1-gen-2022 | Stiuso V.Minetola P.Giubilini A.Fontana L.Khandpur M. S.Rifuggiato S.Marchiandi G. | 2022 - IC4M Stiuso.pdf |
| Build orientation effect on Ti6Al4V thin-wall topography by electron beam powder bed fusion / Maculotti, G.; Piscopo, G.; Marchiandi, G.; Atzeni, E.; Salmi, A.; Iuliano, L.. - ELETTRONICO. - 108:(2022), pp. 222-227. (Intervento presentato al convegno 6th CIRP Conference on Surface Integrity tenutosi a Lione nel 8-10/6/2022) [10.1016/j.procir.2022.03.039]. | 1-gen-2022 | MacUlotti G.Piscopo G.Marchiandi G.Atzeni E.Salmi A.Iuliano L. | 2022_Maculotti_et_al_EBM_orientation_CIRP_CSI.pdf |
| Proposal of an Innovative Benchmark for the Evaluation of 3D Printing Accuracy for Photopolymers / Minetola, Paolo; de Freitas Pacheco, Vinicius; Massarani, Marcelo; Calignano, Flaviana; Marchiandi, Giovanni. - ELETTRONICO. - 1048:(2022), pp. 279-290. (Intervento presentato al convegno 3rd International Conference on Materials Science and Manufacturing Technology (ICMSMT 2021) tenutosi a Tamil Nadu, India nel 8-9 aprile 2021) [10.4028/www.scientific.net/MSF.1048.279]. | 1-gen-2022 | Minetola, PaoloCalignano, FlavianaMarchiandi, Giovanni + | MSF.1048.279.pdf; Pre-print_MSF1048_Minetola.pdf |
| Development of a low-cost monitoring system for open 3d printing / Khandpur, M S; Galati, M; Minetola, P; Marchiandi, G; Fontana, L; Stiuso, V. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - 1136:(2021), p. 012044. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021) tenutosi a Madhya Pradesh, India nel 6th-7th March 2021) [10.1088/1757-899x/1136/1/012044]. | 1-gen-2021 | Khandpur, M SGalati, MMinetola, PMarchiandi, GFontana, LStiuso, V | Khandpur_2021_IOP_Conf_Ser_Mater_Sci_Eng_1136_012044.pdf |
| Effect of track geometry on the measurement uncertainty of wear in pin-on-disc tribological test / Maculotti, G.; Goti, E.; Genta, G.; Marchiandi, G.; Mura, A.; Mazza, L.; Galetto, M.. - ELETTRONICO. - (2021), pp. 293-296. (Intervento presentato al convegno 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021 nel 2021). | 1-gen-2021 | Maculotti G.Goti E.Genta G.Marchiandi G.Mura A.Mazza L.Galetto M. | 2021_Maculotti_Euspen2021.pdf |
| On the quality of electron beam melted thin-walled parts with curved surfaces / Piscopo, Gabriele; Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca; Marchiandi, Giovanni; Pilagatti, ADRIANO NICOLA; Vecchi, Giuseppe; Poggi, Mirna. - (2021). (Intervento presentato al convegno Progress in Digital and Physical Manufacturing). | 1-gen-2021 | Gabriele PiscopoAlessandro SalmiEleonora AtzeniLuca IulianoGiovanni MarchiandiAdriano Nicola PilagattiGiuseppe VecchiMirna Poggi | ProDPM21_#23_Piscopo_manuscript.pdf |
| Accuracy of down-facing surfaces in complex internal channels produced by laser powder bed fusion (L-PBF) / Calignano, F.; Iuliano, L.; Galati, M.; Minetola, P.; Marchiandi, G.. - 88:(2020), pp. 423-426. (Intervento presentato al convegno 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2019 tenutosi a ita nel 2019) [10.1016/j.procir.2020.05.073]. | 1-gen-2020 | Calignano F.Iuliano L.Galati M.Minetola P.Marchiandi G. | 1-s2.0-S2212827120303942-main.pdf |
| Mesoscale modelling of laser powder-based directed energy deposition process / Piscopo, G.; Atzeni, E.; Salmi, A.; Iuliano, L.; Gatto, A.; Marchiandi, G.; Balestrucci, A.. - 88:(2020), pp. 393-398. (Intervento presentato al convegno 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2019 tenutosi a Italia nel 2019) [10.1016/j.procir.2020.05.068]. | 1-gen-2020 | Piscopo G.Atzeni E.Salmi A.Iuliano L.Gatto A.Marchiandi G.Balestrucci A. | 1-s2.0-S2212827120303875-main(1).pdf |
| Ti-6Al-4V lattice structures produced by EBM: Heat treatment and mechanical properties / Galati, M.; Saboori, A.; Biamino, S.; Calignano, F.; Lombardi, M.; Marchiandi, G.; Minetola, P.; Fino, P.; Iuliano, L.. - 88:(2020), pp. 411-416. (Intervento presentato al convegno 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2019 tenutosi a ita nel 2019) [10.1016/j.procir.2020.05.071]. | 1-gen-2020 | Galati M.Saboori A.Biamino S.Calignano F.Lombardi M.Marchiandi G.Minetola P.Fino P.Iuliano L. | 1-s2.0-S2212827120303905-main.pdf |
| A methodology for evaluating the aesthetic quality of 3D printed parts / Galati, M.; Minetola, P.; Marchiandi, G.; Atzeni, E.; Calignano, F.; Salmi, A.; Iuliano, L.. - 79:(2019), pp. 95-100. (Intervento presentato al convegno 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2018) tenutosi a Ischia (NA) nel 18-20 July 2018) [10.1016/j.procir.2019.02.018]. | 1-gen-2019 | Galati M.Minetola P.Marchiandi G.Atzeni E.Calignano F.Salmi A.Iuliano L. | 1-s2.0-S2212827119301325-main.pdf |
| Evaluation of the flexural behaviour of 3D printed multimaterial beams / Minetola, Paolo; Iuliano, Luca; Marchiandi, Giovanni. - ELETTRONICO. - (2017), pp. 34-34. (Intervento presentato al convegno EUPOC 2017 – Polymers and Additive Manufacturing: from fundamentals to applications tenutosi a Gargnano (BS) - Italy nel 21-25 May 2017). | 1-gen-2017 | Paolo MinetolaLuca IulianoGiovanni Marchiandi | EUPOC 2017.pdf |
| Benchmarking of FDM Machines through Part Quality Using IT Grades / Minetola, Paolo; Iuliano, Luca; Marchiandi, Giovanni. - ELETTRONICO. - 41:(2016), pp. 1027-1032. (Intervento presentato al convegno 48th CIRP Conference on Manufacturing Systems - CIRP CMS 2015 tenutosi a Ischia (NA), Italy nel 24 - 26 June 2015) [10.1016/j.procir.2015.12.075]. | 1-gen-2016 | MINETOLA, PAOLOIULIANO, LucaMARCHIANDI, GIOVANNI | CMS 2015 - Benchmarking of FDM machines.pdf |
| Development of a low cost eye gaze tracker / Bulf, Luca; Fonda, Sergio; Marchiandi, G.; Gatto, Andrea. - (2009). (Intervento presentato al convegno 9th AITeM Conference tenutosi a Torino nel September 7-9 2009). | 1-gen-2009 | Marchiandi, G. + | - |
| Reverse Engineering approach for a joystick handgrip re-styling with ergonomic features / Elena, Bassoli; Andrea, Gatto; Iuliano, L.; Marchiandi, G.. - (2003). (Intervento presentato al convegno 3D Modelling tenutosi a Paris (France) nel 2003, April 23-24). | 1-gen-2003 | L. , IulianoG. , Marchiandi + | - |
| Step milling for prototyping of large and precise part / Gatto, A.; Iuliano, L.; Marchiandi, G.. - 1:(2001). (Intervento presentato al convegno 7th European Conference on Advanced Material and Processes nel 10-14 June). | 1-gen-2001 | GATTO A.IULIANO L.MARCHIANDI G. | - |