Archivio Istituzionale della RicercaSALMI, ALESSANDRO
SALMI, ALESSANDRO
Dipartimento di Ingegneria Gestionale e della Produzione
015789
A systematic review on interlocking structures to enhance dissimilar materials joining by additive manufacturing
2026 Valenza, Federica; Atzeni, Eleonora; Aversa, Alberta; Biamino, Sara; Salmi, Alessandro
Factor screening for adaptive powder feeding in Laser-Beam Directed Energy Deposition
2026 Pilagatti, Adriano Nicola; Vinčić, Josip; Atzeni, Eleonora; Salmi, Alessandro; Manfredi, Diego
Progress and innovations in the TCV tokamak research programme
2026 Theiler, C.; Adamek, J.; Agostini, M.; Albert, C.; Alberti, S.; Alberti, G.; Aleiferis, S.; Alessi, E.; Anastassiou, G.; Andrèbe, Y.; Antonenas, Y.; Apruzzese, G. M.; Aucone, L.; Auriemma, F.; Ayllon-Guerola, J.; Aymerich, E.; Bagnato, F.; Bairaktaris, F.; Balestri, A.; Ball, J.; Balugani, S.; Baquero-Ruiz, M.; Bardsley, O.; Battey, A. F.; Bauer, T.; Bechtle, S.; Bernert, M.; Bin, W.; Blanchard, P.; Boedo, J.; Bolzonella, T.; Bonalumi, L.; Bonisolli, M.; Bosman, T.; Bouffet-Klein, R.; Boyer, M. D.; Bramucci, L.; Braunmüller, F.; Breizman, B. N.; Brida, D.; Brown, B.; Brunner, S.; Buchli, J.; Buermans, J.; Busi, D.; Camenen, Y.; Cardinali, A.; Carli, S.; Carnevale, D.; Carpanese, F.; Carpita, M.; Casolari, A.; Castaldo, C.; Cavedon, M.; Cazabonne, J.; Cerovsky, J.; Chapman-Oplopoiou, B.; Chellai, O.; Chervonyi, Y.; Chlum, J.; Chmielewski, P.; Chomiczewska, A.; Cicioni, R.; Ciraolo, G.; Classen, I.; Clod, A.; Coda, S.; Colandrea, C.; Contré, C. E.; Coosemans, R.; Cordaro, L.; Cornelissen, M.; Craciunescu, T.; Cruz Zabala, D. J.; Czarski, M.; Davies, I.; Dawson, C.; De Tommasi, G.; De Vylder, B.; Decker, J.; Derks, G. L.; Devlaminck, E.; Di Giannatale, G.; Di Grazia, L. E.; Ding, R.; Donner, C.; Dreval, M.; Dritselis, C.; Dubbioso, S.; Ducker, R.; Dunne, M.; Durr-Legoupil-Nicoud, G.; Duval, B. P.; Édes, L.; Ernst, S.; Faitsch, M.; Fan, C.; Fasoli, A.; Fedorczak, N.; Felici, F.; Ferron, N.; Ficker, O.; Figini, L.; Figueiredo, P.; Frank, A.; Frassinetti, L.; Frattolillo, D.; Frigione, D.; Furno, I.; Février, O.; Galassi, D.; Galdon-Quiroga, J.; Galeani, S.; Galperti, C.; Gambrioli, M.; Garavaglia, S.; Garcia Herreros, S.; Garcia Munoz, M.; Gaudio, P.; Gelfusa, M.; Genoud, J.; Gerasimov, S.; Gil, L.; Giroud, C.; Giroud-Garampon, P.; Gobbin, M.; Golfinopoulos, T.; Goodman, T. P.; Gorno, S.; Grandin, M.; Granucci, G.; Graziano, F.; Griener, M.; Grzybicka, N.; Guinchard, S.; Hafner, R.; Hakola, A.; Halldestam, P.; Ham, C.; Hamel, Ph.; Hamm, D.; Heinrich, P.; Heiß, C.; Henderson, S.; Hennequin, P.; Hogge, J. -P.; Hojlund, R.; Honoré, C.; Hoppe, M.; Horacek, J.; Huett, E.; Innocente, P.; Ivanov, P.; Ivanov, V.; Jackson, T.; Jansen Van Vuuren, A.; Jardin, A.; Jaspers, R.; Jaulmes, F.; Jensen, T.; Jimenez Comez, M.; Joffrin, E.; Kabirov, D.; Karpushov, A. N.; Kasilov, S.; Kazakov, Y.; Kerboua-Benlarbi, S.; Khan, A.; King, D.; Kirjasuo, A.; Kivits, E. M. M.; Kobussen, S.; Koenders, J. T. W.; Kohli, P.; Kolsen De Wit, J.; Kominis, Y.; Kong, M.; Kool, B.; Kovacic, J.; Kropackova, D.; Krutkin, O.; Kumar, U.; Kwiatkowski, R.; La Matina, M.; Labit, B.; Lafay, A.; Laporta, V.; Lazic, N.; Lee, K.; Lengyel, F.; Lim, K.; Linehan, B.; Listopad, A.; Lobko, L.; Lonigro, N.; Lunt, T.; Mackenbach, R.; Macusova, E.; Maget, P.; Malec, S.; Mancini, D.; Mantica, P.; Marchetto, C.; Marchioni, S.; Mariani, A.; Marin, M.; Marinoni, A.; Markl, M.; Martin, Y.; Martinelli, L.; Masillo, S.; Masocco, R.; Masson, V.; Mattei, M.; Mattogno, S.; Mazon, D.; Mazzi, S.; Mele, A.; Menkovski, V.; Merle, A.; Michi, A.; Mirowski, R.; Misdanitis, S.; Mishra, R.; Moiraf, D.; Molina-Cabrera, P. A.; Molisani, S.; Mombelli, F.; Morgan, R. I.; Moro, A.; Murari, A.; Murray, K.; Muscente, P.; Muzio, I.; Mykytchuk, D.; Nakeva, Y.; Napoli, F.; Nielsen, A. H.; Nielsen, S. K.; Norman, T.; Nowak, S.; Nyström, H.; Ochoukov, R.; Orduna-Martinez, A.; Orlandi, L.; Orrico, C.; Orsitto, F. P.; Osawa, R.; Osborne, N.; Oyola, P.; Paduaru, C.; Pajares, A.; Palade, D. I.; Pan, O.; Panico, O.; Papagiannis, P.; Passoni, M.; Pastore, F.; Patel, A.; Pau, A.; Paz-Soldan, C.; Pedersen, A. C.; Pedrini, M.; Pelka, G.; Perek, A.; Peres Asnis, Y.; Perillo, R.; Pesamosca, F.; Petersen, K.; Pigatto, L.; Piron, C.; Piron, L.; Pironti, A.; Plyusnin, V.; Podesta, M.; Poels, Y.; Pokol, G. I.; Poley, J.; Pomârjanschi, L.; Poradzinski, M.; Porte, L.; Possieri, C.; Puentes Del Pozo, F.; Pueschel, M. J.; Quadri, V.; Rabinski, M.; Ragona, R.; Ratta, G. A.; Rea, C.; Reimerdes, H.; Reisner, M.; Reux, C.; Ricci, D.; Ricci, P.; Riedmiller, M.; Rienäcker, S.; Rispoli, N.; Rivero-Rodriguez, J. F.; Rizkallah, R.; Rodriguez Gonzalez, A.; Romano, F.; Rossi, R.; Rud, M.; Sales De Oliveira, D.; Salewski, M.; Salmi, A.; Sauter, O.; S Schmidt, Bo; Schoonheere, N.; Schutjes, K.; Scotti, L.; Senni, L.; Senstius, M. G.; Setzu, S.; Sharapov, S. E.; Sheikh, U. A.; Sias, G.; Silva Füglister, M.; Silvagni, D.; Simonetto, A.; Simons, L.; Singh, L.; Singh, K.; Sintre, P.; Sipilä, S.; So, O.; Sommariva, C.; Sozzi, C.; Spagnolo, S.; Stagni, A.; Stollberg, C.; Subba, F.; Sun, G.; Sun, H.; Svantner, J.; Tala, T.; Tamain, P.; Tanaka, K.; Tang, W.; Tema Biwole, A.; Tenaglia, A.; Terranova, D.; Testa, D.; Thome, K. E.; Thrysoe, A.; Tomes, M.; Tonello, E.; Topalova, M. A.; Tracey, B.; Tsitrone, E.; Tsui, C. K.; Tumbokon, J.; Tunkl, M.; Ugoletti, M.; Valentini, A.; Vallar, M.; Van Berkel, M.; Van Leeuwen, L.; Van Mulders, S.; Van Parys, G.; Van Rossem, M.; Venturini, C.; Verhaegh, K.; Vermare, L.; Vianello, N.; Viezzer, E.; Villard, L.; Vincent, B.; Vincent, C.; Vincenzi, P.; Vinklárek, J.; Voitsekhovitch, I.; Votta, L.; Vu, N. M. T.; Wang, A.; Wang, C.; Wang, Y.; Wendler, N.; Westerhof, E.; Wiesen, S.; Wijkamp, T.; Winkel, M.; Wüthrich, C.; Wyss, I.; Xiang, L.; Xu, G.; Yang, H.; Zebrowski, J.; Zestanakis, P. A.; Zhang, H.; Zimmermann, C. F. B.; Zuin, M.; Zurita, M.
Tailored Heat-Treatment Strategies for W360 Tool Steel Produced by Directed Energy Deposition
2026 Talur Chandrashekar, Gnanesh; Vinčić, Josip; Rotzsche, Stefan; Zampato, Massimo; Finotto, Christian; Salmi, Alessandro; Aversa, Alberta; Fino, Paolo
The Role of Additive Manufacturing in the Design Workflow of a Physical Human – Robot Interface for an Active Orthosis
2026 Beghetti, C.; Atzeni, E.; Salmi, A.; Iuliano, L.
An appraisal of integrating multi-jet fusion (MJF) additive manufacturing into automotive production lines
2025 Atzeni, Eleonora; Priarone, Paolo C.; Salmi, Alessandro
Impurity study in the dimensionless and dimensional isotope identity experiment between JET Deuterium and Tritium L-mode plasmas
2025 Chomiczewska, A.; Tala, T.; Gromelski, W.; Ivanova-Stanik, I.; Kowalska-Strzęciwilk, E.; Wendler, N.; Carvalho, I. S.; Carvalho, P.; Coffey, I.; Kirjasuo, A.; Lennholm, M.; Menmuir, S.; Pucella, G.; Salmi, A.; Thomas, B.; Subba, F.
Knowledge Generation of Wire Laser-Beam-Directed Energy Deposition Process Combining Process Data and Metrology Responses
2025 Pilagatti, Adriano Nicola; Atzeni, Eleonora; Salmi, Alessandro; Tzimanis, Konstantinos; Porevopoulos, Nikolas; Stavropoulos, Panagiotis
Evaluation of Porosity in AISI 316L Samples Processed by Laser Powder Directed Energy Deposition
2024 Salmi, Alessandro; Piscopo, Gabriele; Pilagatti, Adriano Nicola; Atzeni, Eleonora
Heat-Treated Inconel 625 by Laser Powder Bed Fusion: Microstructure, Tensile Properties, and Residual Stress Evolution
2024 Marchese, Giulio; Piscopo, Gabriele; Lerda, Serena; Salmi, Alessandro; Atzeni, Eleonora; Biamino, Sara
Hybrid Multi-Criteria Decision Making for Additive or Conventional Process Selection in the Preliminary Design Phase
2024 Salmi, Alessandro; Vecchi, Giuseppe; Atzeni, Eleonora; Iuliano, Luca
Investigation of dimensional and geometrical tolerances of laser powder directed energy deposition process
2024 Piscopo, G.; Salmi, A.; Atzeni, E.
Mitigation of Residual Stress and Distortion of AlSi10Mg Parts Produced by Laser Powder Bed Fusion through a Proper Selection of Support Geometry
2024 Piscopo, G.; Atzeni, E.; Salmi, A.
Process window development of DED-LB/M process with coaxial wire for stainless steel AISI 316L
2024 Stavropoulos, Panagiotis; Bikas, Harry; Tzimanis, Konstantinos; Porevopoulos, Nikos; Pilagatti, ADRIANO NICOLA; Atzeni, Eleonora; Iuliano, Luca; Salmi, Alessandro
A grey-box model of laser-powder directed energy deposition for complex scanning strategy
2023 Poggi, Mirna; Atzeni, Eleonora; De Chirico, Michele; Salmi, Alessandro
Abrasive fluidized bed finishing of additive manufactured cobalt-chrome parts: effects on surface morphology and fatigue behavior
2023 Atzeni, Eleonora; Genna, Silvio; Salmi, Alessandro; Trovalusci, Federica; Rubino, Gianluca
An Overview of the Process Mechanisms in the Laser Powder Directed Energy Deposition
2023 Piscopo, G.; Atzeni, E.; Saboori, A.; Salmi, A.
Exploiting the generative design potential to select the best conceptual design of an aerospace component to be produced by additive manufacturing
2023 Pilagatti, Adriano Nicola; Atzeni, Eleonora; Salmi, Alessandro
A comparative study of dry and cryogenic milling for Directed Energy Deposited IN718 components: effect on process and part quality
2022 Souflas, T.; Bikas, H.; Ghassempouri, M.; Salmi, A.; Atzeni, E.; Saboori, A.; Brugnetti, I.; Valente, A.; Mazzucato, F.; Stavropoulos, P.
In-situ alloying of a fine grained fully equiaxed Ti-based alloy via electron beam powder bed fusion additive manufacturing process
2022 Mosallanejad, M. H.; Niroumand, B.; Ghibaudo, C.; Biamino, S.; Salmi, A.; Fino, P.; Saboori, A.
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| A systematic review on interlocking structures to enhance dissimilar materials joining by additive manufacturing / Valenza, F., Atzeni, E., Aversa, A., Biamino, S., Salmi, A.. - In: MATERIALS & DESIGN. - ISSN 0264-1275. - ELETTRONICO. - 270:(2026), pp. 1-33. [10.1016/j.matdes.2026.116872] | 1-gen-2026 | Federica ValenzaEleonora AtzeniAlberta AversaSara BiaminoAlessandro Salmi | main.pdf |
| Factor screening for adaptive powder feeding in Laser-Beam Directed Energy Deposition / Pilagatti, A.N., Vinčić, J., Atzeni, E., Salmi, A., Manfredi, D.. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - (2026). [10.1007/s00170-026-17941-w] | 1-gen-2026 | Pilagatti, Adriano NicolaAtzeni, EleonoraSalmi, AlessandroManfredi, Diego + | - |
| Progress and innovations in the TCV tokamak research programme / Theiler, C., Adamek, J., Agostini, M., Albert, C., Alberti, S., Alberti, G., Aleiferis, S., Alessi, E., Anastassiou, G., Andrèbe, Y., Antonenas, Y., Apruzzese, G.M., Aucone, L., Auriemma, F., Ayllon-Guerola, J., Aymerich, E., Bagnato, F., Bairaktaris, F., Balestri, A., Ball, J., et al.. - In: NUCLEAR FUSION. - ISSN 0029-5515. - 66:11(2026). [10.1088/1741-4326/ae6d12] | 1-gen-2026 | Agostini, M.Ball, J.Bin, W.Busi, D.Carli, S.Carnevale, D.Colandrea, C.Davies, I.Di Giannatale, G.Fan, C.Galassi, D.Lee, K.Mancini, D.Marchetto, C.Marin, M.Martinelli, L.Molisani, S.Muzio, I.Nowak, S.Orrico, C.Pironti, A.Possieri, C.Ragona, R.Salmi, A.Spagnolo, S.Subba, F.Tema Biwole, A.Terranova, D.Venturini, C.Vianello, N.Xiang, L. + | - |
| Tailored Heat-Treatment Strategies for W360 Tool Steel Produced by Directed Energy Deposition / Talur Chandrashekar, G., Vinčić, J., Rotzsche, S., Zampato, M., Finotto, C., Salmi, A., Aversa, A., Fino, P.. - In: METALS. - ISSN 2075-4701. - 16:8(2026), pp. 1-24. [10.3390/met16080848] | 1-gen-2026 | Gnanesh Talur ChandrashekarAlessandro SalmiAlberta AversaPaolo Fino + | metals-16-00848.pdf |
| The Role of Additive Manufacturing in the Design Workflow of a Physical Human – Robot Interface for an Active Orthosis / Beghetti, C., Atzeni, E., Salmi, A., Iuliano, L.. - In: JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS. - ISSN 1573-0409. - 112:3(2026). [10.1007/s10846-026-02398-6] | 1-gen-2026 | Beghetti C.Atzeni E.Salmi A.Iuliano L. | - |
| An appraisal of integrating multi-jet fusion (MJF) additive manufacturing into automotive production lines / Atzeni, E., Priarone, P.C., Salmi, A.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - 10:8(2025), pp. 4689-4703. [10.1007/s40964-024-00853-0] | 1-gen-2025 | Atzeni, EleonoraPriarone, Paolo C.Salmi, Alessandro | Progress Additive Manufacturing 10 (2025) 4689-4703.pdf |
| Impurity study in the dimensionless and dimensional isotope identity experiment between JET Deuterium and Tritium L-mode plasmas / Chomiczewska, A., Tala, T., Gromelski, W., Ivanova-Stanik, I., Kowalska-Strzęciwilk, E., Wendler, N., Carvalho, I.S., Carvalho, P., Coffey, I., Kirjasuo, A., Lennholm, M., Menmuir, S., Pucella, G., Salmi, A., Thomas, B., Subba, F.. - In: NUCLEAR FUSION. - ISSN 0029-5515. - 65:1(2025), pp. 2-15. [10.1088/1741-4326/ad9758] | 1-gen-2025 | Salmi, A.Subba, F. + | Chomiczewska2024.pdf |
| Knowledge Generation of Wire Laser-Beam-Directed Energy Deposition Process Combining Process Data and Metrology Responses / Pilagatti, A.N., Atzeni, E., Salmi, A., Tzimanis, K., Porevopoulos, N., Stavropoulos, P.. - In: JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING. - ISSN 2504-4494. - ELETTRONICO. - 9:7(2025). [10.3390/jmmp9070230] | 1-gen-2025 | Pilagatti, Adriano NicolaAtzeni, EleonoraSalmi, Alessandro + | jmmp-09-00230_compressed.pdf |
| Evaluation of Porosity in AISI 316L Samples Processed by Laser Powder Directed Energy Deposition / Salmi, A., Piscopo, G., Pilagatti, A.N., Atzeni, E.. - In: JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING. - ISSN 2504-4494. - 8:(2024). [10.3390/jmmp8040129] | 1-gen-2024 | Salmi, AlessandroPiscopo, GabrielePilagatti, Adriano NicolaAtzeni, Eleonora | jmmp-08-00129+(1)_compressed_compressed.pdf |
| Heat-Treated Inconel 625 by Laser Powder Bed Fusion: Microstructure, Tensile Properties, and Residual Stress Evolution / Marchese, G., Piscopo, G., Lerda, S., Salmi, A., Atzeni, E., Biamino, S.. - In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. - ISSN 1059-9495. - 33:(2024), pp. 6825-6834. [10.1007/s11665-024-09235-7] | 1-gen-2024 | Marchese, GiulioPiscopo, GabrieleLerda, SerenaSalmi, AlessandroAtzeni, EleonoraBiamino, Sara | s11665-024-09235-7.pdf |
| Hybrid Multi-Criteria Decision Making for Additive or Conventional Process Selection in the Preliminary Design Phase / Salmi, A., Vecchi, G., Atzeni, E., Iuliano, L.. - In: DESIGNS. - ISSN 2411-9660. - ELETTRONICO. - 8:6(2024). [10.3390/designs8060110] | 1-gen-2024 | Alessandro SalmiGiuseppe VecchiEleonora AtzeniLuca Iuliano | designs-3201324.pdf |
| Investigation of dimensional and geometrical tolerances of laser powder directed energy deposition process / Piscopo, G., Salmi, A., Atzeni, E.. - In: PRECISION ENGINEERING. - ISSN 0141-6359. - 85:(2024), pp. 217-225. [10.1016/j.precisioneng.2023.10.006] | 1-gen-2024 | Piscopo G.Salmi A.Atzeni E. | 1-s2.0-S0141635923001897-main.pdf |
| Mitigation of Residual Stress and Distortion of AlSi10Mg Parts Produced by Laser Powder Bed Fusion through a Proper Selection of Support Geometry / Piscopo, G., Atzeni, E., Salmi, A.. - In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. - ISSN 1059-9495. - 33:8(2024), pp. 3978-3985. [10.1007/s11665-023-09108-5] | 1-gen-2024 | Piscopo G.Atzeni E.Salmi A. | s11665-023-09108-5.pdf |
| Process window development of DED-LB/M process with coaxial wire for stainless steel AISI 316L / Stavropoulos, P., Bikas, H., Tzimanis, K., Porevopoulos, N., Pilagatti, A.N., Atzeni, E., Iuliano, L., Salmi, A.. - In: INTERNATIONAL JOURNAL OF EXPERIMENTAL DESIGN AND PROCESS OPTIMISATION. - ISSN 2040-2260. - ELETTRONICO. - (2024). [10.1504/IJEDPO.2024.10063465] | 1-gen-2024 | Adriano Nicola PilagattiEleonora AtzeniLuca IulianoAlessandro Salmi + | stavropoulos-et-al-2024-process-window-development-of-ded-lb-m-process-with-coaxial-wire-for-stainless-steel-aisi-316l.pdf |
| A grey-box model of laser-powder directed energy deposition for complex scanning strategy / Poggi, M., Atzeni, E., De Chirico, M., Salmi, A.. - In: METALS. - ISSN 2075-4701. - (2023). [10.3390/met13101763] | 1-gen-2023 | Mirna PoggiEleonora AtzeniAlessandro Salmi + | metals-13-01763.pdf |
| Abrasive fluidized bed finishing of additive manufactured cobalt-chrome parts: effects on surface morphology and fatigue behavior / Atzeni, E., Genna, S., Salmi, A., Trovalusci, F., Rubino, G.. - In: THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 1433-3015. - ELETTRONICO. - 124:5-6(2023), pp. 1939-1949. [10.1007/s00170-022-10580-x] | 1-gen-2023 | Eleonora AtzeniAlessandro Salmi + | d4a9a07d-d5a5-4667-9adf-29eeca80f609.pdf; LPBF_CoCr_AFB-Fatigue_Manuscript.pdf |
| An Overview of the Process Mechanisms in the Laser Powder Directed Energy Deposition / Piscopo, G., Atzeni, E., Saboori, A., Salmi, A.. - In: APPLIED SCIENCES. - ISSN 2076-3417. - 13:1(2023). [10.3390/app13010117] | 1-gen-2023 | Piscopo G.Atzeni E.Saboori A.Salmi A. | applsci-13-00117_compressed-1.pdf |
| Exploiting the generative design potential to select the best conceptual design of an aerospace component to be produced by additive manufacturing / Pilagatti, A.N., Atzeni, E., Salmi, A.. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - 126:(2023), pp. 5597-5612. [10.1007/s00170-023-11259-7] | 1-gen-2023 | Pilagatti, Adriano NicolaAtzeni, EleonoraSalmi, Alessandro | s00170-023-11259-7.pdf |
| A comparative study of dry and cryogenic milling for Directed Energy Deposited IN718 components: effect on process and part quality / Souflas, T., Bikas, H., Ghassempouri, M., Salmi, A., Atzeni, E., Saboori, A., Brugnetti, I., Valente, A., Mazzucato, F., Stavropoulos, P.. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - 119:1-2(2022), pp. 745-758. [10.1007/s00170-021-08313-7] | 1-gen-2022 | Salmi A.Atzeni E.Saboori A. + | Souflas2022_Article_AComparativeStudyOfDryAndCryog.pdf |
| In-situ alloying of a fine grained fully equiaxed Ti-based alloy via electron beam powder bed fusion additive manufacturing process / Mosallanejad, M.H., Niroumand, B., Ghibaudo, C., Biamino, S., Salmi, A., Fino, P., Saboori, A.. - In: ADDITIVE MANUFACTURING. - ISSN 2214-8604. - ELETTRONICO. - 56:(2022). [10.1016/j.addma.2022.102878] | 1-gen-2022 | Ghibaudo C.Biamino S.Salmi A.Fino P.Saboori A. + | In-situ alloying of a fine grained fully equiaxed Ti-based alloy via electron beam powder bed fusion additive manufacturing process.pdf |