Archivio Istituzionale della RicercaGIUBILINI, ALBERTO
GIUBILINI, ALBERTO
Dipartimento di Ingegneria Gestionale e della Produzione
070843
Assessment of simulation software for predicting induced distortions in laser-beam powder bed fusion of Ti6Al4V
2025 Giubilini, Alberto; Calignano, Flaviana; Galati, Manuela; Minetola, Paolo
Evaluating Self-Produced PLA Filament for Sustainable 3D Printing: Mechanical Properties and Energy Consumption Compared to Commercial Alternatives
2025 Fontana, Luca; Minetola, Paolo; Khandpur, Mankirat Singh; Giubilini, Alberto
Exploring printing methods for continuous natural fiber-reinforced thermoplastic biocomposites: A comparative study
2025 dos Santos, Natália V.; Giubilini, Alberto; Cardoso, Daniel Carlos T.; Minetola, Paolo
High‐Pressure Homogenization: An Industrially Scalable Method for Producing PHBH Powders for Selective Laser Sintering
2025 Giubilini, Alberto; Colucci, Giovanna; Grasselli, Silvia; Iuliano, Luca; Messori, Massimo; Minetola, Paolo
Towards sustainable additive manufacturing of continuous natural yarn-reinforced thermoplastic biocomposites: a review
2025 Dos Santos, Natália V.; Giubilini, Alberto; Minetola, Paolo; Iuliano, Luca; Banea, Mariana D.; Cardoso, Daniel Carlos T.
A preliminary study on multi‐material fused filament fabrication of an embedded strain gauge for low‐cost real‐time monitoring of part strain
2024 Minetola, Paolo; Giubilini, Alberto
Effect of annealing treatment and infill percentage on 3D-printed PEEK samples by Fused Filament Fabrication
2024 Lannunziata, Erika; Colucci, Giovanna; Minetola, Paolo; Giubilini, Alberto
On the Use of Green and Blue Laser Sources for Powder Bed Fusion: State of the Art Review for Additive Manufacturing of Copper and Its Alloys
2024 Khandpur, Mankirat Singh; Giubilini, Alberto; Iuliano, Luca; Minetola, Paolo
Valorization of Winery By-Products as Bio-Fillers for Biopolymer-Based Composites
2024 Biagi, Filippo; Giubilini, Alberto; Veronesi, Paolo; Nigro, Giovanni; Messori, Massimo
3D-Printed Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-Cellulose-Based Scaffolds for Biomedical Applications
2023 Giubilini, Alberto; Messori, Massimo; Bondioli, Federica; Minetola, Paolo; Iuliano, Luca; Nyström, Gustav; Maniura-Weber, Katharina; Rottmar, Markus; Siqueira, Gilberto
An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data
2023 Khandpur, M. S.; Minetola, P.; Stiuso, V.; Rifuggiato, S.; Fontana, L.; Lannunziata, E.; Giubilini, A.; Iuliano, L.
Eco-Sustainable Approaches in Bone Tissue Engineering: Evaluating the Angiogenic Potential of Different Poly(3-Hydroxybutyrate-Co-3-Hydroxyhexanoate)-Nanocellulose Composites with the Chorioallantoic Membrane Assay
2023 Stanzani, V; Giubilini, A; Checchi, M; Bondioli, F; Messori, M; Palumbo, C
Influence of Process Parameters on Compression Properties of 3D Printed Polyether-Ether-Ketone by Fused Filament Fabrication
2023 Lannunziata, Erika; Giubilini, Alberto; Saboori, Abdollah; Minetola, Paolo
Multimaterial 3D printing of auxetic jounce bumpers for automotive suspensions
2023 Giubilini, Alberto; Minetola, Paolo
Novel 3D printable bio-based and biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) microspheres for selective laser sintering applications
2023 Giubilini, A.; Colucci, G.; De Trane, Giorgio; Lupone, F.; Badini, C.; Minetola, P.; Bondioli, F.; Messori, M.
Benchmarking analysis of digital light processing resins in terms of dimensional accuracy and geometric tolerances
2022 Stiuso, V.; Minetola, P.; Giubilini, A.; Fontana, L.; Khandpur, M. S.; Rifuggiato, S.; Marchiandi, G.
Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses
2022 Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo
Characterization of biocompatible scaffolds manufactured by fused filament fabrication of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)
2022 Volpini, Valentina; Giubilini, Alberto; Corsi, Lorenzo; Nobili, Andrea; Bondioli, Federica
Novel PBAT‐Based Biocomposites Reinforced with Bioresorbable Phosphate Glass Microparticles
2022 Togliatti, Elena; Pugliese, Diego; Giubilini, Alberto; Messori, Massimo; Milanese, Daniel; Sciancalepore, Corrado
Preparation and characterization of innovative poly(butylene adipate terephthalate)‐based biocomposites for agri‐food packaging application
2022 Sciancalepore, Corrado; Togliatti, Elena; Giubilini, Alberto; Pugliese, Diego; Moroni, Fabrizio; Messori, Massimo; Milanese, Daniel
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Assessment of simulation software for predicting induced distortions in laser-beam powder bed fusion of Ti6Al4V / Giubilini, Alberto; Calignano, Flaviana; Galati, Manuela; Minetola, Paolo. - In: THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 1433-3015. - ELETTRONICO. - 138:(2025), pp. 1039-1054. [10.1007/s00170-025-15576-x] | 1-gen-2025 | Giubilini, AlbertoCalignano, FlavianaGalati, ManuelaMinetola, Paolo | - |
| Evaluating Self-Produced PLA Filament for Sustainable 3D Printing: Mechanical Properties and Energy Consumption Compared to Commercial Alternatives / Fontana, Luca; Minetola, Paolo; Khandpur, Mankirat Singh; Giubilini, Alberto. - In: JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING. - ISSN 2504-4494. - ELETTRONICO. - 9:6(2025), pp. 1-24. [10.3390/jmmp9060172] | 1-gen-2025 | Fontana, LucaMinetola, PaoloKhandpur, Mankirat SinghGiubilini, Alberto | jmmp-09-00172.pdf |
| Exploring printing methods for continuous natural fiber-reinforced thermoplastic biocomposites: A comparative study / dos Santos, Natália V.; Giubilini, Alberto; Cardoso, Daniel Carlos T.; Minetola, Paolo. - In: SUSTAINABLE MATERIALS AND TECHNOLOGIES. - ISSN 2214-9937. - ELETTRONICO. - 43:(2025). [10.1016/j.susmat.2025.e01253] | 1-gen-2025 | Giubilini, AlbertoMinetola, Paolo + | 2025_Exploring+printing+methods+for+continuous+natural+fiber+reinforced+thermoplastic+biocomposites+A+comparative+study_compressed.pdf |
| High‐Pressure Homogenization: An Industrially Scalable Method for Producing PHBH Powders for Selective Laser Sintering / Giubilini, Alberto; Colucci, Giovanna; Grasselli, Silvia; Iuliano, Luca; Messori, Massimo; Minetola, Paolo. - In: ADVANCED MATERIALS TECHNOLOGIES. - ISSN 2365-709X. - ELETTRONICO. - (2025). [10.1002/admt.202500049] | 1-gen-2025 | Giubilini, AlbertoColucci, GiovannaIuliano, LucaMessori, MassimoMinetola, Paolo + | - |
| Towards sustainable additive manufacturing of continuous natural yarn-reinforced thermoplastic biocomposites: a review / Dos Santos, Natália V.; Giubilini, Alberto; Minetola, Paolo; Iuliano, Luca; Banea, Mariana D.; Cardoso, Daniel Carlos T.. - In: CELLULOSE. - ISSN 1572-882X. - ELETTRONICO. - (2025), pp. 1-31. [10.1007/s10570-025-06594-9] | 1-gen-2025 | Giubilini, AlbertoMinetola, PaoloIuliano, Luca + | - |
| A preliminary study on multi‐material fused filament fabrication of an embedded strain gauge for low‐cost real‐time monitoring of part strain / Minetola, Paolo; Giubilini, Alberto. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9520. - ELETTRONICO. - 9:6(2024), pp. 2273-2290. [10.1007/s40964-024-00582-4] | 1-gen-2024 | Minetola, PaoloGiubilini, Alberto | 2024_ A preliminary study on multi‐material fused filament fabrication of an embedded strain gauge for low‐cost real‐time monitoring of part strain.pdf |
| Effect of annealing treatment and infill percentage on 3D-printed PEEK samples by Fused Filament Fabrication / Lannunziata, Erika; Colucci, Giovanna; Minetola, Paolo; Giubilini, Alberto. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - 131:(2024), pp. 5209-5222. [10.1007/s00170-024-13347-8] | 1-gen-2024 | Lannunziata, ErikaColucci, GiovannaMinetola, PaoloGiubilini, Alberto | s00170-024-13347-8.pdf |
| On the Use of Green and Blue Laser Sources for Powder Bed Fusion: State of the Art Review for Additive Manufacturing of Copper and Its Alloys / Khandpur, Mankirat Singh; Giubilini, Alberto; Iuliano, Luca; Minetola, Paolo. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 14:12(2024). [10.3390/met14121464] | 1-gen-2024 | Khandpur, Mankirat SinghGiubilini, AlbertoIuliano, LucaMinetola, Paolo | 2024_On the Use of Green and Blue Laser Sources for Powder Bed Fusion State of the Art Review for Additive Manufacturing of Copper and Its Alloys.pdf |
| Valorization of Winery By-Products as Bio-Fillers for Biopolymer-Based Composites / Biagi, Filippo; Giubilini, Alberto; Veronesi, Paolo; Nigro, Giovanni; Messori, Massimo. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 16:10(2024). [10.3390/polym16101344] | 1-gen-2024 | Giubilini, AlbertoMessori, Massimo + | 2024_Valorization of Winery By-Products as Bio-Fillers for Biopolymer-Based Composites.pdf |
| 3D-Printed Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-Cellulose-Based Scaffolds for Biomedical Applications / Giubilini, Alberto; Messori, Massimo; Bondioli, Federica; Minetola, Paolo; Iuliano, Luca; Nyström, Gustav; Maniura-Weber, Katharina; Rottmar, Markus; Siqueira, Gilberto. - In: BIOMACROMOLECULES. - ISSN 1525-7797. - ELETTRONICO. - (2023). [10.1021/acs.biomac.3c00263] | 1-gen-2023 | Giubilini, AlbertoMessori, MassimoBondioli, FedericaMinetola, PaoloIuliano, Luca + | acs.biomac.3c00263.pdf |
| An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data / Khandpur, M. S.; Minetola, P.; Stiuso, V.; Rifuggiato, S.; Fontana, L.; Lannunziata, E.; Giubilini, A.; Iuliano, L.. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - (2023). (Intervento presentato al convegno Fourth International Conference on Recent Advances in Materials and Manufacturing 2022 tenutosi a Erode, Tamil Nadu (INDIA) nel 08-09/12/2022) [10.1016/j.matpr.2023.03.385]. | 1-gen-2023 | Khandpur M. S.Minetola P.Stiuso V.Rifuggiato S.Fontana L.Lannunziata E.Giubilini A.Iuliano L. | 2023_An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data.pdf |
| Eco-Sustainable Approaches in Bone Tissue Engineering: Evaluating the Angiogenic Potential of Different Poly(3-Hydroxybutyrate-Co-3-Hydroxyhexanoate)-Nanocellulose Composites with the Chorioallantoic Membrane Assay / Stanzani, V; Giubilini, A; Checchi, M; Bondioli, F; Messori, M; Palumbo, C. - In: ADVANCED ENGINEERING MATERIALS. - ISSN 1527-2648. - ELETTRONICO. - 25:2(2023). [10.1002/adem.202200934] | 1-gen-2023 | Giubilini, ABondioli, FMessori, M + | Adv+Eng+Mater+-+2022+-+Stanzani+-+Eco‐Sustainable+Approaches+in+Bone+Tissue+Engineering+Evaluating+the+Angiogenic.pdf |
| Influence of Process Parameters on Compression Properties of 3D Printed Polyether-Ether-Ketone by Fused Filament Fabrication / Lannunziata, Erika; Giubilini, Alberto; Saboori, Abdollah; Minetola, Paolo. - ELETTRONICO. - 1:(2023), pp. 336-344. (Intervento presentato al convegno Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems. FAIM 2023 tenutosi a Porto nel Giugno) [10.1007/978-3-031-38241-3_38]. | 1-gen-2023 | Lannunziata, ErikaGiubilini, AlbertoSaboori, AbdollahMinetola, Paolo | 2023 - FAIM - PEEK by FFF.pdf |
| Multimaterial 3D printing of auxetic jounce bumpers for automotive suspensions / Giubilini, Alberto; Minetola, Paolo. - In: RAPID PROTOTYPING JOURNAL. - ISSN 1355-2546. - 29:11(2023), pp. 131-142. [10.1108/RPJ-02-2023-0066] | 1-gen-2023 | Giubilini, AlbertoMinetola, Paolo | 2023_Multimaterial 3D printing of auxetic jounce bumpers for automotive suspensions.pdf |
| Novel 3D printable bio-based and biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) microspheres for selective laser sintering applications / Giubilini, A.; Colucci, G.; De Trane, Giorgio; Lupone, F.; Badini, C.; Minetola, P.; Bondioli, F.; Messori, M.. - In: MATERIALS TODAY SUSTAINABILITY. - ISSN 2589-2347. - ELETTRONICO. - 22:(2023), pp. 1-9. [10.1016/j.mtsust.2023.100379] | 1-gen-2023 | Giubilini, A.Colucci, G.Lupone, F.Badini, C.Minetola, P.Bondioli, F.Messori, M. + | 2023 - PHBH microspheres for SLS.pdf |
| Benchmarking analysis of digital light processing resins in terms of dimensional accuracy and geometric tolerances / Stiuso, V.; Minetola, P.; Giubilini, A.; Fontana, L.; Khandpur, M. S.; Rifuggiato, S.; Marchiandi, G.. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 62:(2022), pp. 6654-6662. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2022) tenutosi a Madhya Pradesh (India) nel 9-10 aprile 2022) [10.1016/j.matpr.2022.04.658]. | 1-gen-2022 | Stiuso V.Minetola P.Giubilini A.Fontana L.Khandpur M. S.Rifuggiato S.Marchiandi G. | 2022 - IC4M Stiuso.pdf |
| Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses / Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo. - In: POLYMERS. - ISSN 2073-4360. - ELETTRONICO. - 14:17(2022), pp. 1-19. [10.3390/polym14173530] | 1-gen-2022 | Fontana, LucaGiubilini, AlbertoArrigo, RossellaMalucelli, GiulioMinetola, Paolo | polymers-14-03530-v3.pdf |
| Characterization of biocompatible scaffolds manufactured by fused filament fabrication of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) / Volpini, Valentina; Giubilini, Alberto; Corsi, Lorenzo; Nobili, Andrea; Bondioli, Federica. - In: ROYAL SOCIETY OPEN SCIENCE. - ISSN 2054-5703. - ELETTRONICO. - 9:4(2022). [10.1098/rsos.211485] | 1-gen-2022 | Giubilini, AlbertoBondioli, Federica + | 2022_Characterization of biocompatible scaffolds manufactured by fused filament fabrication of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate).pdf |
| Novel PBAT‐Based Biocomposites Reinforced with Bioresorbable Phosphate Glass Microparticles / Togliatti, Elena; Pugliese, Diego; Giubilini, Alberto; Messori, Massimo; Milanese, Daniel; Sciancalepore, Corrado. - In: MACROMOLECULAR SYMPOSIA. - ISSN 1022-1360. - ELETTRONICO. - 405:1(2022), p. 2100238. [10.1002/masy.202100238] | 1-gen-2022 | Pugliese, DiegoGiubilini, AlbertoMessori, Massimo + | Novel PBAT‐based biocomposites reinforced with bioresorbable phosphate glass.pdf |
| Preparation and characterization of innovative poly(butylene adipate terephthalate)‐based biocomposites for agri‐food packaging application / Sciancalepore, Corrado; Togliatti, Elena; Giubilini, Alberto; Pugliese, Diego; Moroni, Fabrizio; Messori, Massimo; Milanese, Daniel. - In: JOURNAL OF APPLIED POLYMER SCIENCE. - ISSN 0021-8995. - ELETTRONICO. - 139:24(2022). [10.1002/app.52370] | 1-gen-2022 | Giubilini, AlbertoPugliese, DiegoMessori, Massimo + | Preparation and characterization of innovative poly(butylene adipate terephthalate)-based biocomposites for agri-food packaging application.pdf |