Archivio Istituzionale della RicercaSfoglia per Autore
Electro-Discharge Drilling performance on parts produced byDMLS
2012 Gatto, Andrea; Iuliano, Luca; Calignano, Flaviana; Bassoli, E.
Thermoplastic Resin Transfer Moulding in a rapid manufactured mould
2012 Atzeni, Eleonora; Calignano, Flaviana; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro; Bassoli, E.; Denti, L.; Gatto, A.
Reverse engineering of casting equipment for process simulation
2012 Calignano, Flaviana; Minetola, Paolo; Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca
Realization and characterization of AlSiMg/SiC composites by direct metal laser sintering
2012 Manfredi, DIEGO GIOVANNI; Ambrosio, Elisa Paola; Calignano, Flaviana; Canali, Riccardo; Krishnan, Manickavasagam; Biamino, Sara; Pavese, Matteo; Fino, Paolo
Influence of process parameters on surface roughness of aluminum parts produced by DMLS
2013 Calignano, F.; Manfredi, D.; Ambrosio, E. P.; Iuliano, Luca; Fino, Paolo
From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering
2013 Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; Manickavasagam, Krishnan; Riccardo, Canali; Ambrosio, ELISA PAOLA; Atzeni, Eleonora
Direct Metal Laser Sintering: an additive manufacturing technology ready to produce lightweight structural parts for robotic applications
2013 Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; Ambrosio, Elisa Paola; Krishnan, Manickavasagam; Canali, Riccardo; Biamino, Sara; Pavese, Matteo; Atzeni, Eleonora; Iuliano, Luca; Fino, Paolo; Badini, CLAUDIO FRANCESCO
Studies on electrodischarge drilling of an Al2O3-TiC composite
2013 Denti, Lucia; Bassoli, Elena; Gatto, Andrea; Iuliano, Luca; Calignano, Flaviana
SUPERFICI MICRO-ALETTATE PER L’AUMENTO DELLO SCAMBIO TERMICO
2014 Ventola, Luigi; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Chiavazzo, Eliodoro; Asinari, Pietro
Additive Manufacturing of Al Alloys and Aluminium Matrix Composites (AMCs)
2014 Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; Krishnan, Manickavasagam; Canali, Riccardo; Ambrosio, Elisa Paola; Biamino, Sara; Ugues, Daniele; Pavese, Matteo; Fino, Paolo
Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
2014 Calignano, F.
Aluminium matrix composites (AMCs) by DMLS
2014 Manfredi, DIEGO GIOVANNI; Canali, Riccardo; Krishnan, Manickavasagam; Ambrosio, Elisa Paola; Calignano, Flaviana; Pavese, Matteo; Miranti, Lorenzo; Belardinelli, Simone; Biamino, Sara; Fino, Paolo
A sensor for direct measurement of small convective heat fluxes: Validation and application to micro-structured surfaces
2014 Chiavazzo, Eliodoro; Ventola, Luigi; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Asinari, Pietro
Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering
2014 Ventola, Luigi; Francesco, Robotti; Dialameh, Masoud; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Chiavazzo, Eliodoro; Asinari, Pietro
Influence of post‐processing operations on mechanical properties of AlSi10Mg Parts by DMLS
2014 Krishnan, M.; Atzeni, Eleonora; Canali, R.; Manfredi, D.; Calignano, F.; Ambrosio, E.; Iuliano, Luca
Direct fabrication of joints based on direct metal laser sintering in aluminum and titanium alloys
2014 Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Ambrosio, Elisa Paola; Biamino, Sara; Pavese, Matteo; Fino, Paolo
Combined reverse engineering and CAD approach for mould modelling in casting simulation
2014 Salmi, Alessandro; Atzeni, Eleonora; Calignano, F.; Minetola, Paolo; Iuliano, Luca
Electro-Discharge Drilling on DMLS parts in Co-Cr-Mo alloy
2014 Gatto, A.; Bassoli, E.; Denti, L.; Atzeni, Eleonora; Iuliano, Luca; Marchiandi, Giovanni; Minetola, Paolo; Salmi, Alessandro; Calignano, F.
Heat Transfer Enhancement by Finned Heat Sinks with Micro-structured Roughness
2014 Ventola, Luigi; Chiavazzo, Eliodoro; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Asinari, Pietro
Production of overhanging structures by DMLS
2014 Calignano, F.; Manfredi, D.
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Electro-Discharge Drilling performance on parts produced byDMLS / Gatto, Andrea; Iuliano, Luca; Calignano, Flaviana; Bassoli, E.. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - (2012), pp. 1003-1018. [10.1007/s00170-011-3446-8] | 1-gen-2012 | GATTO, ANDREAIULIANO, LucaCALIGNANO, FLAVIANA + | - |
| Thermoplastic Resin Transfer Moulding in a rapid manufactured mould / Atzeni, Eleonora; Calignano, Flaviana; Iuliano, Luca; Minetola, Paolo; Salmi, Alessandro; Bassoli, E.; Denti, L.; Gatto, A. - In: Innovative Developments in Virtual and Physical Prototyping / Bartolo P.J. et al.. - ELETTRONICO. - London : CRC Press, 2012. - pp. 413-421 [10.1201/b11341-67] | 1-gen-2012 | ATZENI, ELEONORACALIGNANO, FLAVIANAIULIANO, LucaMINETOLA, PAOLOSALMI, ALESSANDRO + | - |
| Reverse engineering of casting equipment for process simulation / Calignano, Flaviana; Minetola, Paolo; Salmi, Alessandro; Atzeni, Eleonora; Iuliano, Luca - In: Innovative Developments in Virtual and Physical Prototyping / Bartolo P.J. et al.. - ELETTRONICO. - London : CRC Press, 2012. - pp. 177-186 [10.1201/b11341-30] | 1-gen-2012 | CALIGNANO, FLAVIANAMINETOLA, PAOLOSALMI, ALESSANDROATZENI, ELEONORAIULIANO, Luca | - |
| Realization and characterization of AlSiMg/SiC composites by direct metal laser sintering / Manfredi, DIEGO GIOVANNI; Ambrosio, Elisa Paola; Calignano, Flaviana; Canali, Riccardo; Krishnan, Manickavasagam; Biamino, Sara; Pavese, Matteo; Fino, Paolo. - ELETTRONICO. - (2012). (Intervento presentato al convegno ECCM15, 15th european conference on composite materials tenutosi a Venezia, Italy nel 24-28 June 2012). | 1-gen-2012 | MANFREDI, DIEGO GIOVANNIAMBROSIO, Elisa PaolaCALIGNANO, FLAVIANACANALI, RICCARDOKRISHNAN, MANICKAVASAGAMBIAMINO, SARAPAVESE, MATTEOFINO, Paolo | - |
| Influence of process parameters on surface roughness of aluminum parts produced by DMLS / Calignano, F.; Manfredi, D.; Ambrosio, E. P.; Iuliano, Luca; Fino, Paolo. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - 67:9-12(2013), pp. 2743-2751. [10.1007/s00170-012-4688-9] | 1-gen-2013 | Calignano, F.Manfredi, D.Ambrosio, E. P.IULIANO, LucaFINO, Paolo | 2505584.pdf |
| From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering / Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; Manickavasagam, Krishnan; Riccardo, Canali; Ambrosio, ELISA PAOLA; Atzeni, Eleonora. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 6:(2013), pp. 856-869. [10.3390/ma6030856] | 1-gen-2013 | Diego ManfrediFlaviana CalignanoElisa AmbrosioATZENI, ELEONORA + | 2013_From powders to dense metal parts characterization of a commercial AlSiMg alloy processed through direct metal laser sintering.pdf |
| Direct Metal Laser Sintering: an additive manufacturing technology ready to produce lightweight structural parts for robotic applications / Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; Ambrosio, Elisa Paola; Krishnan, Manickavasagam; Canali, Riccardo; Biamino, Sara; Pavese, Matteo; Atzeni, Eleonora; Iuliano, Luca; Fino, Paolo; Badini, CLAUDIO FRANCESCO. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - STAMPA. - 105 (10):(2013), pp. 15-25. | 1-gen-2013 | MANFREDI, DIEGO GIOVANNICALIGNANO, FLAVIANAAMBROSIO, Elisa PaolaKRISHNAN, MANICKAVASAGAMCANALI, RICCARDOBIAMINO, SARAPAVESE, MATTEOATZENI, ELEONORAIULIANO, LucaFINO, PaoloBADINI, CLAUDIO FRANCESCO | - |
| Studies on electrodischarge drilling of an Al2O3-TiC composite / Denti, Lucia; Bassoli, Elena; Gatto, Andrea; Iuliano, Luca; Calignano, Flaviana. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - STAMPA. - 66:9-12(2013), pp. 1757-1768. [10.1007/s00170-012-4455-y] | 1-gen-2013 | IULIANO, LucaCALIGNANO, FLAVIANA + | - |
| SUPERFICI MICRO-ALETTATE PER L’AUMENTO DELLO SCAMBIO TERMICO / Ventola, Luigi; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Chiavazzo, Eliodoro; Asinari, Pietro. - (2014). (Intervento presentato al convegno III congresso nazionale del coordinamento della meccanica italiana tenutosi a napoli nel 30/06/2014). | 1-gen-2014 | VENTOLA, LUIGICALIGNANO, FLAVIANAMANFREDI, DIEGO GIOVANNICHIAVAZZO, ELIODOROASINARI, PIETRO | - |
| Additive Manufacturing of Al Alloys and Aluminium Matrix Composites (AMCs) / Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; Krishnan, Manickavasagam; Canali, Riccardo; Ambrosio, Elisa Paola; Biamino, Sara; Ugues, Daniele; Pavese, Matteo; Fino, Paolo - In: Light Metal Alloys Applications / Waldemar A. Monteiro. - ELETTRONICO. - Rijeka : InTech, 2014. - ISBN 9789535115885. - pp. 1-32 [10.5772/58534] | 1-gen-2014 | MANFREDI, DIEGO GIOVANNICALIGNANO, FLAVIANAKRISHNAN, MANICKAVASAGAMCANALI, RICCARDOAMBROSIO, Elisa PaolaBIAMINO, SARAUGUES, DanielePAVESE, MATTEOFINO, Paolo | - |
| Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting / Calignano, F.. - In: MATERIALS IN ENGINEERING. - ISSN 0261-3069. - 64:(2014), pp. 203-213. [10.1016/j.matdes.2014.07.043] | 1-gen-2014 | Calignano, F. | - |
| Aluminium matrix composites (AMCs) by DMLS / Manfredi, DIEGO GIOVANNI; Canali, Riccardo; Krishnan, Manickavasagam; Ambrosio, Elisa Paola; Calignano, Flaviana; Pavese, Matteo; Miranti, Lorenzo; Belardinelli, Simone; Biamino, Sara; Fino, Paolo. - (2014), pp. 249-253. (Intervento presentato al convegno 6th International Conference on Advanced Research in Virtual and Physical Prototyping, VR@P 2013 tenutosi a Leira nel 1 October 2013 through 5 October 2013). | 1-gen-2014 | MANFREDI, DIEGO GIOVANNICANALI, RICCARDOKRISHNAN, MANICKAVASAGAMAMBROSIO, Elisa PaolaCALIGNANO, FLAVIANAPAVESE, MATTEOMIRANTI, LORENZOBELARDINELLI, SIMONEBIAMINO, SARAFINO, Paolo | - |
| A sensor for direct measurement of small convective heat fluxes: Validation and application to micro-structured surfaces / Chiavazzo, Eliodoro; Ventola, Luigi; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Asinari, Pietro. - In: EXPERIMENTAL THERMAL AND FLUID SCIENCE. - ISSN 0894-1777. - STAMPA. - 55:(2014), pp. 42-53. [10.1016/j.expthermflusci.2014.02.010] | 1-gen-2014 | CHIAVAZZO, ELIODOROVENTOLA, LUIGICALIGNANO, FLAVIANAMANFREDI, DIEGO GIOVANNIASINARI, PIETRO | Sensor_ETFS-D-13-00440_v06.pdf |
| Rough surfaces with enhanced heat transfer for electronics cooling by direct metal laser sintering / Ventola, Luigi; Francesco, Robotti; Dialameh, Masoud; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Chiavazzo, Eliodoro; Asinari, Pietro. - In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. - ISSN 0017-9310. - STAMPA. - 75:(2014), pp. 58-74. [10.1016/j.ijheatmasstransfer.2014.03.037] | 1-gen-2014 | VENTOLA, LUIGIDIALAMEH, MASOUDCALIGNANO, FLAVIANAMANFREDI, DIEGO GIOVANNICHIAVAZZO, ELIODOROASINARI, PIETRO + | Roughness-preprint.pdf |
| Influence of post‐processing operations on mechanical properties of AlSi10Mg Parts by DMLS / Krishnan, M.; Atzeni, Eleonora; Canali, R.; Manfredi, D.; Calignano, F.; Ambrosio, E.; Iuliano, Luca - In: High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013 / Bartolo P.J. et al.. - STAMPA. - London : CRC PRESS, 2014. - ISBN 9781138001374. - pp. 243-248 [10.1201/b15961-46] | 1-gen-2014 | KRISHNAN M.ATZENI, ELEONORAMANFREDI D.CALIGNANO F.AMBROSIO E.IULIANO, Luca + | - |
| Direct fabrication of joints based on direct metal laser sintering in aluminum and titanium alloys / Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Ambrosio, Elisa Paola; Biamino, Sara; Pavese, Matteo; Fino, Paolo. - 21:(2014), pp. 129-132. (Intervento presentato al convegno 24th CIRP Design Conference: Mass Customization and Personalization tenutosi a Pirelli Lombardy Region PalaceMilano; Italy nel 14 April 2014 through 16 April 2014) [10.1016/j.procir.2014.03.155]. | 1-gen-2014 | CALIGNANO, FLAVIANAMANFREDI, DIEGO GIOVANNIAMBROSIO, Elisa PaolaBIAMINO, SARAPAVESE, MATTEOFINO, Paolo | - |
| Combined reverse engineering and CAD approach for mould modelling in casting simulation / Salmi, Alessandro; Atzeni, Eleonora; Calignano, F.; Minetola, Paolo; Iuliano, Luca. - In: INTERNATIONAL JOURNAL OF CAST METALS RESEARCH. - ISSN 1364-0461. - ELETTRONICO. - 27:4(2014), pp. 213-220. [10.1179/1743133613Y.0000000101] | 1-gen-2014 | SALMI, ALESSANDROATZENI, ELEONORACalignano F.MINETOLA, PAOLOIULIANO, Luca | - |
| Electro-Discharge Drilling on DMLS parts in Co-Cr-Mo alloy / Gatto, A.; Bassoli, E.; Denti, L.; Atzeni, Eleonora; Iuliano, Luca; Marchiandi, Giovanni; Minetola, Paolo; Salmi, Alessandro; Calignano, F. - In: High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping - Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, VR@P 2013 / Bartolo P.J. et al.. - STAMPA. - London : CRC Press, 2014. - ISBN 9781138001374. - pp. 237-242 [10.1201/b15961-45] | 1-gen-2014 | ATZENI, ELEONORAIULIANO, LucaMARCHIANDI, GIOVANNIMINETOLA, PAOLOSALMI, ALESSANDROCalignano F. + | - |
| Heat Transfer Enhancement by Finned Heat Sinks with Micro-structured Roughness / Ventola, Luigi; Chiavazzo, Eliodoro; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Asinari, Pietro. - In: JOURNAL OF PHYSICS. CONFERENCE SERIES. - ISSN 1742-6596. - ELETTRONICO. - 494:(2014), pp. 012009-1-012009-9. (Intervento presentato al convegno International Conference on Microtechnology and Thermal Problems in Electronics, MicroTherm' 2013 tenutosi a Lodz (Poland) nel 25 -28 June 2013) [10.1088/1742-6596/494/1/012009]. | 1-gen-2014 | VENTOLA, LUIGICHIAVAZZO, ELIODOROCALIGNANO, FLAVIANAMANFREDI, DIEGO GIOVANNIASINARI, PIETRO | - |
| Production of overhanging structures by DMLS / Calignano, F.; Manfredi, D.. - STAMPA. - (2014), pp. 61-64. (Intervento presentato al convegno 6th International Conference on Advanced Research in Virtual and Physical Prototyping, VR@P 2013 tenutosi a Leira, prt nel 2013). | 1-gen-2014 | Calignano, F.Manfredi, D. | - |
Legenda icone
- file ad accesso aperto
- file disponibili sulla rete interna
- file disponibili agli utenti autorizzati
- file disponibili solo agli amministratori
- file sotto embargo
- nessun file disponibile