Archivio Istituzionale della RicercaAMBROSIO, ELISA PAOLA
AMBROSIO, ELISA PAOLA
016331
Solution Treatment Study of Inconel 718 Produced by SLM Additive Technique in View of the Oxidation Resistance
2018 Calandri, Michele; Manfredi, Diego; Calignano, Flaviana; Ambrosio, Elisa Paola; Biamino, Sara; Lupoi, Rocco; Ugues, Daniele
A study of the microstructure and the mechanical properties of an AlSiNi alloy produced via selective laser melting
2017 Aversa, Alberta; Lorusso, Massimo; Cattano, Giulio; Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; Ambrosio, ELISA PAOLA; Biamino, Sara; Fino, Paolo; Lombardi, Mariangela; Pavese, Matteo
Effect of process and post-process conditions on the mechanical properties of an A357 alloy produced via laser powder bed fusion
2017 Aversa, Alberta; Lorusso, Massimo; Trevisan, Francesco; Ambrosio, ELISA PAOLA; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Biamino, Sara; Fino, Paolo; Lombardi, Mariangela; Pavese, Matteo
Feasibility of Electrochemical Deposition of Nickel/Silicon Carbide Fibers Composites over Nickel Superalloys
2017 Ambrosio, ELISA PAOLA; ABDUL KARIM, MUHAMMAD RAMZAN; Pavese, Matteo; Biamino, Sara; Badini, CLAUDIO FRANCESCO; Fino, Paolo
Investigation of accuracy and dimensional limits of part produced in aluminum alloy by selective laser melting
2017 Calignano, Flaviana; Lorusso, Massimo; Pakkanen, JUKKA ANTERO; Trevisan, Francesco; Ambrosio, ELISA PAOLA; Manfredi, DIEGO GIOVANNI; Fino, Paolo
Microstructural and Mechanical Characterization of Aluminum Matrix Composites Produced by Laser Powder Bed Fusion
2017 Aversa, Alberta; Marchese, Giulio; Lorusso, Massimo; Calignano, Flaviana; Biamino, Sara; Ambrosio, ELISA PAOLA; Manfredi, DIEGO GIOVANNI; Fino, Paolo; Lombardi, Mariangela; Pavese, Matteo
On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties
2017 Trevisan, Francesco; Calignano, Flaviana; Lorusso, Massimo; Pakkanen, JUKKA ANTERO; Aversa, Alberta; Ambrosio, Elisa Paola; Lombardi, Mariangela; Fino, Paolo; Manfredi, DIEGO GIOVANNI
Overview on Additive Manufacturing Technologies
2017 Calignano, Flaviana; Manfredi, D.; Ambrosio, E. P.; Biamino, Sara; Lombardi, Mariangela; Atzeni, Eleonora; Salmi, Alessandro; Minetola, Paolo; Iuliano, Luca; Fino, Paolo
Selective Laser Melting Manufacturing of Microwave Waveguide Devices
2017 Peverini, Oscar Antonio; Lumia, Mauro; Calignano, Flaviana; Addamo, Giuseppe; Lorusso, Massimo; Ambrosio, ELISA PAOLA; Manfredi, DIEGO GIOVANNI; Virone, Giuseppe
Corrosion resistance of direct metal laser sintering AlSiMg alloy
2016 Cabrini, M.; Lorenzi, S.; Pastore, T.; Pellegrini, S; Pavese, Matteo; Fino, Paolo; Ambrosio, ELISA PAOLA; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI
Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy
2016 Cabrini, M; Lorenzi, S.; Pastore, T.; Pellegrini, S.; Ambrosio, ELISA PAOLA; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Pavese, Matteo; Fino, Paolo
Microstructural investigation of as-fabricated and heat-treated Inconel 625 and Inconel 718 fabricated by direct metal laser sintering: contribution of Politecnico di Torino and Istituto Italiano di Tecnologia (IIT) di Torino
2016 Marchese, Giulio; Bassini, Emilio; Calandri, Michele; Ambrosio, Elisa Paola; Calignano, Flaviana; Lorusso, Massimo; Manfredi, Diego; Pavese, Matteo; Biamino, Sara; Fino, Paolo
Passive heat transfer enhancement by 3D printed Pitot tube based heat sink
2016 Fasano, Matteo; Ventola, Luigi; Calignano, Flaviana; Manfredi, Diego; Ambrosio, Elisa P.; Chiavazzo, Eliodoro; Asinari, Pietro
Softening the ultra-stiff: Controlled variation of Young's modulus in single-crystal diamond by ion implantation
2016 Battiato, A.; Lorusso, Massimo; Bernardi, E.; Picollo, F.; Bosia, F.; Ugues, Daniele; Zelferino, A.; Damin, A.; Baima, J.; Pugno, N. M.; Ambrosio, ELISA PAOLA; Olivero, P.
Studio della resistenza alla corrosione della lega AISi10mg ottenuta per additive manufacturing in soluzione di cloruri
2016 Cabrini, Marina; Lorenzi, S.; Pastore, T.; Pellegrini, S.; Testa, C.; Manfredi, D.; Ambrosio, E. P.; Calignano, F.; Lorusso, M.; Fino, P.
Study of Internal Channel Surface Roughnesses Manufactured by Selective Laser Melting in Aluminum and Titanium Alloys
2016 Pakkanen, JUKKA ANTERO; Calignano, Flaviana; Trevisan, Francesco; Lorusso, Massimo; Ambrosio, ELISA PAOLA; Manfredi, DIEGO GIOVANNI; Fino, Paolo
Tribological Behavior of Aluminum Alloy AlSi10Mg-TiB2 Composites Produced by Direct Metal Laser Sintering (DMLS)
2016 Lorusso, Massimo; Aversa, Alberta; Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; Ambrosio, Elisa Paola; Ugues, Daniele; Pavese, Matteo
Enhanced topology of E-plane resonators for high-power satellite applications
2015 Peverini, Oscar Antonio; Addamo, Giuseppe; Tascone, Riccardo; Virone, Giuseppe; Cecchini, Pierluigi; Mizzoni, Roberto; Calignano, Flaviana; Ambrosio, ELISA PAOLA; Manfredi, DIEGO GIOVANNI; Fino, Paolo
On the effect of process parameters on properties of AlSi10Mg parts produced by DMLS
2014 Krishnan, Manickavasagam; Atzeni, Eleonora; Canali, Riccardo; Calignano, Flaviana; Manfredi, DIEGO GIOVANNI; Ambrosio, Elisa Paola; Iuliano, Luca
Direct Metal Laser Sintering: an additive manufacturing technology ready to produce lightweight structural parts for robotic applications
2013 Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; Ambrosio, Elisa Paola; Krishnan, Manickavasagam; Canali, Riccardo; Biamino, Sara; Pavese, Matteo; Atzeni, Eleonora; Iuliano, Luca; Fino, Paolo; Badini, CLAUDIO FRANCESCO
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Solution Treatment Study of Inconel 718 Produced by SLM Additive Technique in View of the Oxidation Resistance / Calandri, M., Manfredi, D., Calignano, F., Ambrosio, E.P., Biamino, S., Lupoi, R., Ugues, D.. - In: ADVANCED ENGINEERING MATERIALS. - ISSN 1527-2648. - ELETTRONICO. - (2018). [10.1002/adem.201800351] | 1-gen-2018 | Calandri, MicheleManfredi, DiegoCalignano, FlavianaAmbrosio, Elisa PaolaBiamino, SaraUgues, Daniele + | postprint draft.pdf |
| A study of the microstructure and the mechanical properties of an AlSiNi alloy produced via selective laser melting / Aversa, A., Lorusso, M., Cattano, G., Manfredi, D.G., Calignano, F., Ambrosio, E.P., Biamino, S., Fino, P., Lombardi, M., Pavese, M.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - 695:(2017), pp. 1470-1478. [10.1016/j.jallcom.2016.10.285] | 1-gen-2017 | AVERSA, ALBERTALORUSSO, MASSIMOCATTANO, GIULIOMANFREDI, DIEGO GIOVANNICALIGNANO, FLAVIANAAMBROSIO, ELISA PAOLABIAMINO, SARAFINO, PaoloLOMBARDI, MARIANGELAPAVESE, MATTEO | 1-s2.0-S0925838816334223-main.pdf |
| Effect of process and post-process conditions on the mechanical properties of an A357 alloy produced via laser powder bed fusion / Aversa, A., Lorusso, M., Trevisan, F., Ambrosio, E.P., Calignano, F., Manfredi, D.G., Biamino, S., Fino, P., Lombardi, M., Pavese, M.. - In: METALS. - ISSN 2075-4701. - 7:2(2017), p. 68. [10.3390/met7020068] | 1-gen-2017 | AVERSA, ALBERTALORUSSO, MASSIMOTREVISAN, FRANCESCOAMBROSIO, ELISA PAOLACALIGNANO, FLAVIANAMANFREDI, DIEGO GIOVANNIBIAMINO, SARAFINO, PaoloLOMBARDI, MARIANGELAPAVESE, MATTEO | Microstructural and Mechanical Characterization of.pdf |
| Feasibility of Electrochemical Deposition of Nickel/Silicon Carbide Fibers Composites over Nickel Superalloys / Ambrosio, E.P., ABDUL KARIM, M.R., Pavese, M., Biamino, S., Badini, C.F., Fino, P.. - In: METALLURGICAL AND MATERIALS TRANSACTIONS. A, PHYSICAL METALLURGY AND MATERIALS SCIENCE. - ISSN 1073-5623. - 48:5(2017), pp. 2504-2510. [10.1007/s11661-017-4007-z] | 1-gen-2017 | AMBROSIO, ELISA PAOLAABDUL KARIM, MUHAMMAD RAMZANPAVESE, MATTEOBIAMINO, SARABADINI, CLAUDIO FRANCESCOFINO, Paolo | - |
| Investigation of accuracy and dimensional limits of part produced in aluminum alloy by selective laser melting / Calignano, F., Lorusso, M., Pakkanen, J.A., Trevisan, F., Ambrosio, E.P., Manfredi, D.G., Fino, P.. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - ELETTRONICO. - (2017). [10.1007/s00170-016-8788-9] | 1-gen-2017 | CALIGNANO, FLAVIANALORUSSO, MASSIMOPAKKANEN, JUKKA ANTEROTREVISAN, FRANCESCOAMBROSIO, ELISA PAOLAMANFREDI, DIEGO GIOVANNIFINO, Paolo | Calignano2017_Article_InvestigationOfAccuracyAndDime.pdf |
| Microstructural and Mechanical Characterization of Aluminum Matrix Composites Produced by Laser Powder Bed Fusion / Aversa, A., Marchese, G., Lorusso, M., Calignano, F., Biamino, S., Ambrosio, E.P., Manfredi, D.G., Fino, P., Lombardi, M., Pavese, M.. - In: ADVANCED ENGINEERING MATERIALS. - ISSN 1438-1656. - (2017), p. 1700180. [10.1002/adem.201700180] | 1-gen-2017 | AVERSA, ALBERTAMARCHESE, GIULIOLORUSSO, MASSIMOCALIGNANO, FLAVIANABIAMINO, SARAAMBROSIO, ELISA PAOLAMANFREDI, DIEGO GIOVANNIFINO, PaoloLOMBARDI, MARIANGELAPAVESE, MATTEO | Aversa_et_al-2017-Advanced_Engineering_Materials (1) (1).pdf |
| On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties / Trevisan, F., Calignano, F., Lorusso, M., Pakkanen, J.A., Aversa, A., Ambrosio, E.P., Lombardi, M., Fino, P., Manfredi, D.G.. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 10:76(2017), pp. 1-23. [10.3390/ma10010076] | 1-gen-2017 | TREVISAN, FRANCESCOCalignano, FlavianaLORUSSO, MASSIMOPAKKANEN, JUKKA ANTEROAVERSA, ALBERTAAmbrosio, Elisa PaolaLOMBARDI, MARIANGELAFINO, PaoloDiego, Manfredi | 2017 - Trevisan - On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy_ Process, Microstructure, and Mechanical Properties.pdf |
| Overview on Additive Manufacturing Technologies / Calignano, F., Manfredi, D., Ambrosio, E.P., Biamino, S., Lombardi, M., Atzeni, E., Salmi, A., Minetola, P., Iuliano, L., Fino, P.. - In: PROCEEDINGS OF THE IEEE. - ISSN 0018-9219. - ELETTRONICO. - 105:4(2017), pp. 593-612. [10.1109/JPROC.2016.2625098] | 1-gen-2017 | CALIGNANO, FLAVIANAManfredi, D.Ambrosio, E. P.BIAMINO, SARALOMBARDI, MARIANGELAATZENI, ELEONORASALMI, ALESSANDROMINETOLA, PAOLOIULIANO, LucaFINO, Paolo | 07803596.pdf |
| Selective Laser Melting Manufacturing of Microwave Waveguide Devices / Peverini, O.A., Lumia, M., Calignano, F., Addamo, G., Lorusso, M., Ambrosio, E.P., Manfredi, D.G., Virone, G.. - In: PROCEEDINGS OF THE IEEE. - ISSN 0018-9219. - ELETTRONICO. - (2017), pp. 1-12. [10.1109/JPROC.2016.2620148] | 1-gen-2017 | PEVERINI, Oscar AntonioLUMIA, MAUROCALIGNANO, FLAVIANAADDAMO, GIUSEPPELORUSSO, MASSIMOAMBROSIO, ELISA PAOLAMANFREDI, DIEGO GIOVANNIVIRONE, GIUSEPPE | SLM manufacturing of passive waveguide devices.pdf; 07803534.pdf |
| Corrosion resistance of direct metal laser sintering AlSiMg alloy / Cabrini, M., Lorenzi, S., Pastore, T., Pellegrini, S., Pavese, M., Fino, P., Ambrosio, E.P., Calignano, F., Manfredi, D.G.. - In: SURFACE AND INTERFACE ANALYSIS. - ISSN 0142-2421. - ELETTRONICO. - 48:8(2016), pp. 818-826. [10.1002/sia.5981] | 1-gen-2016 | PAVESE, MATTEOFINO, PaoloAMBROSIO, ELISA PAOLACALIGNANO, FLAVIANAMANFREDI, DIEGO GIOVANNI + | - |
| Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy / Cabrini, M., Lorenzi, S., Pastore, T., Pellegrini, S., Ambrosio, E.P., Calignano, F., Manfredi, D.G., Pavese, M., Fino, P.. - In: ELECTROCHIMICA ACTA. - ISSN 0013-4686. - ELETTRONICO. - 206:(2016), pp. 346-355. [10.1016/j.electacta.2016.04.157] | 1-gen-2016 | AMBROSIO, ELISA PAOLACALIGNANO, FLAVIANAMANFREDI, DIEGO GIOVANNIPAVESE, MATTEOFINO, Paolo + | 1-s2.0-S001346861631009X-main.pdf |
| Microstructural investigation of as-fabricated and heat-treated Inconel 625 and Inconel 718 fabricated by direct metal laser sintering: contribution of Politecnico di Torino and Istituto Italiano di Tecnologia (IIT) di Torino / Marchese, G., Bassini, E., Calandri, M., Ambrosio, E.P., Calignano, F., Lorusso, M., Manfredi, D., Pavese, M., Biamino, S., Fino, P.. - In: METAL POWDER REPORT. - ISSN 0026-0657. - 71:4(2016), pp. 273-278. [10.1016/j.mprp.2016.06.002] | 1-gen-2016 | MARCHESE, GIULIOBASSINI, EMILIOCALANDRI, MICHELEAmbrosio, Elisa PaolaCalignano, FlavianaLORUSSO, MASSIMOManfredi, DiegoPAVESE, MATTEOBIAMINO, SARAFINO, Paolo | - |
| Passive heat transfer enhancement by 3D printed Pitot tube based heat sink / Fasano, M., Ventola, L., Calignano, F., Manfredi, D., Ambrosio, E.P., Chiavazzo, E., Asinari, P.. - In: INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER. - ISSN 0735-1933. - STAMPA. - 74:(2016), pp. 36-39. [10.1016/j.icheatmasstransfer.2016.03.012] | 1-gen-2016 | FASANO, MATTEOVENTOLA, LUIGICalignano, FlavianaManfredi, DiegoAmbrosio, Elisa P.CHIAVAZZO, ELIODOROASINARI, PIETRO | 3DPitotChiavazzo.pdf; 1-s2.0-S0735193316300732-main.pdf |
| Softening the ultra-stiff: Controlled variation of Young's modulus in single-crystal diamond by ion implantation / Battiato, A., Lorusso, M., Bernardi, E., Picollo, F., Bosia, F., Ugues, D., Zelferino, A., Damin, A., Baima, J., Pugno, N.M., Ambrosio, E.P., Olivero, P.. - In: ACTA MATERIALIA. - ISSN 1359-6454. - Volume 116:(2016), pp. 95-103. [10.1016/j.actamat.2016.06.019] | 1-gen-2016 | LORUSSO, MASSIMOBosia, F.UGUES, DanieleAMBROSIO, ELISA PAOLA + | - |
| Studio della resistenza alla corrosione della lega AISi10mg ottenuta per additive manufacturing in soluzione di cloruri / Cabrini, M., Lorenzi, S., Pastore, T., Pellegrini, S., Testa, C., Manfredi, D., Ambrosio, E.P., Calignano, F., Lorusso, M., Fino, P.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - 108:12(2016), pp. 137-146. | 1-gen-2016 | CABRINI, MARINAManfredi, D.Ambrosio, E. P.Calignano, F.Lorusso, M.Fino, P. + | pdfresizer.com-pdf-split-1.pdf |
| Study of Internal Channel Surface Roughnesses Manufactured by Selective Laser Melting in Aluminum and Titanium Alloys / Pakkanen, J.A., Calignano, F., Trevisan, F., Lorusso, M., Ambrosio, E.P., Manfredi, D.G., Fino, P.. - In: METALLURGICAL AND MATERIALS TRANSACTIONS. A, PHYSICAL METALLURGY AND MATERIALS SCIENCE. - ISSN 1073-5623. - ELETTRONICO. - 47:8(2016), pp. 3837-3844. [10.1007/s11661-016-3478-7] | 1-gen-2016 | PAKKANEN, JUKKA ANTEROCALIGNANO, FLAVIANATREVISAN, FRANCESCOLORUSSO, MASSIMOAMBROSIO, ELISA PAOLAMANFREDI, DIEGO GIOVANNIFINO, Paolo | Pakkanen2016_Article_StudyOfInternalChannelSurfaceR.pdf |
| Tribological Behavior of Aluminum Alloy AlSi10Mg-TiB2 Composites Produced by Direct Metal Laser Sintering (DMLS) / Lorusso, M., Aversa, A., Manfredi, D.G., Calignano, F., Ambrosio, E.P., Ugues, D., Pavese, M.. - In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. - ISSN 1059-9495. - (2016), pp. 1-9. [10.1007/s11665-016-2190-5] | 1-gen-2016 | LORUSSO, MASSIMOAVERSA, ALBERTAMANFREDI, DIEGO GIOVANNICALIGNANO, FLAVIANAAMBROSIO, Elisa PaolaUGUES, DanielePAVESE, MATTEO | - |
| Enhanced topology of E-plane resonators for high-power satellite applications / Peverini, O.A., Addamo, G., Tascone, R., Virone, G., Cecchini, P., Mizzoni, R., Calignano, F., Ambrosio, E.P., Manfredi, D.G., Fino, P.. - In: IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES. - ISSN 0018-9480. - ELETTRONICO. - 63:10(2015), pp. 3361-3373. [10.1109/TMTT.2015.2462839] | 1-gen-2015 | PEVERINI, Oscar AntonioADDAMO, GIUSEPPETASCONE, RICCARDOVIRONE, GIUSEPPECALIGNANO, FLAVIANAAMBROSIO, ELISA PAOLAMANFREDI, DIEGO GIOVANNIFINO, Paolo + | 07202925.pdf |
| On the effect of process parameters on properties of AlSi10Mg parts produced by DMLS / Krishnan, M., Atzeni, E., Canali, R., Calignano, F., Manfredi, D.G., Ambrosio, E.P., Iuliano, L.. - In: RAPID PROTOTYPING JOURNAL. - ISSN 1355-2546. - 20:(2014), pp. 449-458. [10.1108/RPJ-03-2013-0028] | 1-gen-2014 | KRISHNAN, MANICKAVASAGAMATZENI, ELEONORACANALI, RICCARDOCALIGNANO, FLAVIANAMANFREDI, DIEGO GIOVANNIAMBROSIO, Elisa PaolaIULIANO, Luca | - |
| Direct Metal Laser Sintering: an additive manufacturing technology ready to produce lightweight structural parts for robotic applications / Manfredi, D.G., Calignano, F., Ambrosio, E.P., Krishnan, M., Canali, R., Biamino, S., Pavese, M., Atzeni, E., Iuliano, L., Fino, P., Badini, C.F.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - STAMPA. - 105 (10):(2013), pp. 15-25. | 1-gen-2013 | MANFREDI, DIEGO GIOVANNICALIGNANO, FLAVIANAAMBROSIO, Elisa PaolaKRISHNAN, MANICKAVASAGAMCANALI, RICCARDOBIAMINO, SARAPAVESE, MATTEOATZENI, ELEONORAIULIANO, LucaFINO, PaoloBADINI, CLAUDIO FRANCESCO | - |