Archivio Istituzionale della RicercaZUCCA, STEFANO
ZUCCA, STEFANO
Dipartimento di Ingegneria Meccanica e Aerospaziale
003253
Coupled Harmonic Balance based approach for the non-linear dynamics of spur gear pairs
2025 Saletti, Giacomo; Battiato, Giuseppe; Zucca, Stefano
Electromagnetic and Mechanical Modeling of Medium Voltage PMSM for Hybrid Regional Aircraft in Faulty Conditions
2025 Pescetto, Paolo; Cocuzza, Federico; Mashayekhi, Fahimeh; Ferrari, Simone; Zucca, Stefano; Firrone, Christian; Pellegrino, Gianmario
Mass Mistuning Reduced Order Models for Bladed Disks With Shroud Friction Joints
2024 Saletti, Giacomo; Pourkiaee, Seyyedmehrdad; Zucca, Stefano
The Impact of Different Equilibrium Hypothesis on the Non-Linear Response of Bladed Disks
2024 Zara, Gianmarco; Berruti, Teresa Maria; Zucca, Stefano
AN EXPERIMENTAL INVESTIGATION ON THE DYNAMIC RESPONSE VARIABILITY OF A TURBINE BLADE WITH MID-SPAN DAMPERS
2022 Ferhatoglu, E.; Botto, D.; Zucca, S.
Experimental Investigation of Three-Dimensional Shroud Contact Forces in Forced-Vibration Testing of a Shrouded Blade
2022 Ahmed, Rizwan; Firrone, Christian Maria; Zucca, Stefano
Multiple response levels of structures with wedge friction dampers
2022 Zara, G.; Ferhatoglu, E.; Berruti, T. M.; Zucca, S.
Comparison of contact parameters measured with two different friction rigs for nonlinear dynamic analysis
2020 Fantetti, A.; Pennisi, C.; Botto, D.; Zucca, S.; Schwingshackl, C.
Experimental and Numerical Assessment of Mistuning Effects on Vibratory Response of a Bladed Disk With Underplatform Dampers
2020 Pourkiaee, S. Mehrdad; Berruti, Teresa; Zucca, Stefano; Neuville, Geoffrey
Nonlinear dynamic analysis of gas turbine combustor leaf seal
2020 Tamatam, L. R.; Botto, D.; Zucca, S.; Funghi, F.
Nonlinear Vibration Analysis of Turbine Bladed Disks With Mid-Span Dampers
2020 Ferhatoglu, Erhan; Zucca, Stefano; Botto, Daniele; Auciello, Jury; Arcangeli, Lorenzo
A coupled approach to model the effect of wear on the dynamics of bladed disks
2019 Tamatam, LAKSHMINARAYANA REDDY; Botto, Daniele; Zucca, Stefano
Effect of wear on the dynamics of structures with contact interfaces by a coupled static/dynamic multi-harmonic balance method
2019 Tamatam, LAKSHMINARAYANA REDDY; Botto, Daniele; Zucca, Stefano
Nonlinear forced response analysis of bladed disks using a relative cyclic component mode synthesis approach
2019 Pourkiaee, Seyyedmehrdad; Zucca, S.
A Comparison of Two Reduction Techniques for Forced Response of Shrouded Blades with Contact Interfaces
2018 Mashayekhi, Fahimeh; Zucca, Stefano; Ali Salehzadeh Nobari,
A reduced order model for nonlinear dynamics of mistuned bladed disks with shroud friction contacts
2018 Pourkiaee, Seyyedmehrdad; Zucca, Stefano
A sensitivity based heuristic for optimal blade arrangement in a linear mistuned rotor
2018 Mitra, Mainak; Bayrak, Alparslan Emrah; Zucca, Stefano; Epureanu, Bogdan I.
Effect of variation in contact friction on the performance of the under-platform dampers
2018 Umer, M.; Botto, D.; Zucca, S.
Relative cyclic component mode synthesis and its application to nonlinear vibration analysis of mistuned bladed disks with friction joints
2018 Pourkiaee, Seyyedmehrdad; Zucca, Stefano; Parker, ROBERT GLENN
Influence of actual static transmission error and contact ratio on gear engagement dynamics
2017 Oliveri, Leonardo; Rosso, Carlo; Zucca, Stefano
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Coupled Harmonic Balance based approach for the non-linear dynamics of spur gear pairs / Saletti, Giacomo; Battiato, Giuseppe; Zucca, Stefano. - 1:(2025), pp. 161-169. ( IMAC, A Conference and Exposition on Structural Dynamics 2025 Orlando, FL (USA) 10-13 February 2025) [10.13052/97887-438-0146-7_21]. | 1-gen-2025 | Saletti, GiacomoBattiato, GiuseppeZucca, Stefano | RP_9788743801580C21.pdf |
| Electromagnetic and Mechanical Modeling of Medium Voltage PMSM for Hybrid Regional Aircraft in Faulty Conditions / Pescetto, P., Cocuzza, F., Mashayekhi, F., Ferrari, S., Zucca, S., Firrone, C., Pellegrino, G.. - (2025), pp. 1-7. (17th Annual IEEE Energy Conversion Conference Congress and Exposition, ECCE 2025 Philadelphia, PA (USA ) 19-23 October 2025) [10.1109/ecce58356.2025.11260144]. | 1-gen-2025 | Pescetto, PaoloCocuzza, FedericoMashayekhi, FahimehFerrari, SimoneZucca, StefanoFirrone, ChristianPellegrino, Gianmario | Electromagnetic_and_Mechanical_Modeling_of_Medium_Voltage_PMSM_for_Hybrid_Regional_Aircraft_in_Faulty_Conditions.pdf; Electromagnetic_and_Mechanical_Modeling_of_Medium_Voltage_PMSM_for_Hybrid_Regional_Aircraft_in_Faulty_Conditions.pdf |
| Mass Mistuning Reduced Order Models for Bladed Disks With Shroud Friction Joints / Saletti, G., Pourkiaee, S., Zucca, S.. - 10B:(2024). (69th ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, GT 2024 London (UK) June 24–28, 2024) [10.1115/gt2024-123976]. | 1-gen-2024 | Saletti, GiacomoPourkiaee, SeyyedmehrdadZucca, Stefano | v10bt27a011-gt2024-123976.pdf |
| The Impact of Different Equilibrium Hypothesis on the Non-Linear Response of Bladed Disks / Zara, G., Berruti, T.M., Zucca, S.. - 10B:(2024). (ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition London (UK) June 24–28, 2024) [10.1115/GT2024-123245]. | 1-gen-2024 | Zara, GianmarcoBerruti, Teresa MariaZucca, Stefano | v10bt27a007-gt2024-123245.pdf |
| AN EXPERIMENTAL INVESTIGATION ON THE DYNAMIC RESPONSE VARIABILITY OF A TURBINE BLADE WITH MID-SPAN DAMPERS / Ferhatoglu, E., Botto, D., Zucca, S.. - ELETTRONICO. - 8-B:(2022). (ASME Turbo Expo 2022 Rotterdam (Netherlands) June 13–17, 2022) [10.1115/GT2022-79980]. | 1-gen-2022 | Ferhatoglu E.Botto D.Zucca S. | Mid-span Damper_TE2022_revised_v2.pdf |
| Experimental Investigation of Three-Dimensional Shroud Contact Forces in Forced-Vibration Testing of a Shrouded Blade / Ahmed, R., Firrone, C.M., Zucca, S.. - Volume 8B:(2022). (ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition Rotterdam (Netherlands) June 13–17, 2022) [10.1115/GT2022-84205]. | 1-gen-2022 | Ahmed, RizwanFirrone, Christian MariaZucca, Stefano | - |
| Multiple response levels of structures with wedge friction dampers / Zara, G., Ferhatoglu, E., Berruti, T.M., Zucca, S.. - ELETTRONICO. - 1:(2022), pp. 975-989. (ISMA2022 International Conference on Noise and Vibration Engineering Leuven, Belgium 12-14 Settembre 2022). | 1-gen-2022 | Zara G.Berruti T. M.Zucca S. + | - |
| Comparison of contact parameters measured with two different friction rigs for nonlinear dynamic analysis / Fantetti, A., Pennisi, C., Botto, D., Zucca, S., Schwingshackl, C.. - (2020), pp. 2165-2174. (2020 International Conference on Noise and Vibration Engineering, ISMA 2020 and 2020 International Conference on Uncertainty in Structural Dynamics, USD 2020 Leuven, Belgio 2020). | 1-gen-2020 | Botto D.Zucca S. + | 2020 ISMA - Round Robin.pdf |
| Experimental and Numerical Assessment of Mistuning Effects on Vibratory Response of a Bladed Disk With Underplatform Dampers / Pourkiaee, S.M., Berruti, T., Zucca, S., Neuville, G.. - (2020), pp. 1-10. (ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, GT 2020 Virtual online 21–25 September 2020) [10.1115/GT2020-15508]. | 1-gen-2020 | Berruti, TeresaZucca, Stefano + | v011t30a032-gt2020-15508.pdf |
| Nonlinear dynamic analysis of gas turbine combustor leaf seal / Tamatam, L.R., Botto, D., Zucca, S., Funghi, F.. - ELETTRONICO. - (2020), pp. 2187-2202. (2020 International Conference on Noise and Vibration Engineering, ISMA 2020 and 2020 International Conference on Uncertainty in Structural Dynamics, USD 2020 Virtual 2020). | 1-gen-2020 | Tamatam L. R.Botto D.Zucca S. + | ISMA 2020 - Leaf Seal.pdf |
| Nonlinear Vibration Analysis of Turbine Bladed Disks With Mid-Span Dampers / Ferhatoglu, E., Zucca, S., Botto, D., Auciello, J., Arcangeli, L.. - (2020). (ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition Virtual, Online ) [10.1115/gt2020-14942]. | 1-gen-2020 | Erhan FerhatogluStefano ZuccaDaniele Botto + | v011t30a020-gt2020-14942.pdf |
| A coupled approach to model the effect of wear on the dynamics of bladed disks / Tamatam, L.R., Botto, D., Zucca, S.. - ELETTRONICO. - (2019), pp. 1-8. (26th International Congress on Sound and Vibration Montreal, Canada 7-11 July 2019). | 1-gen-2019 | Lakshminarayana Reddy TamatamDaniele BottoStefano Zucca | ICSV26_893_full_paper_Reddy.pdf |
| Effect of wear on the dynamics of structures with contact interfaces by a coupled static/dynamic multi-harmonic balance method / Tamatam, LAKSHMINARAYANA REDDY; Botto, Daniele; Zucca, Stefano. - STAMPA. - 1:(2019), pp. 137-138. ( First International Nonlinear Dynamics Conference NODYCON 2019 Rome 17-20 February 2019). | 1-gen-2019 | lakshminarayana reddy tamatamdaniele bottostefano zucca | - |
| Nonlinear forced response analysis of bladed disks using a relative cyclic component mode synthesis approach / Pourkiaee, S., Zucca, S.. - (2019). (26th International Congress on Sound and Vibration, ICSV 2019 can 2019). | 1-gen-2019 | SeyyedMehrdad PourkiaeeZucca S. | - |
| A Comparison of Two Reduction Techniques for Forced Response of Shrouded Blades with Contact Interfaces / Mashayekhi, F., Zucca, S., Ali Salehzadeh Nobari,. - STAMPA. - Volume 4. Conference Proceedings of the Society for Experimental Mechanics Series:(2018), pp. 79-88. (IMAC XXXVI Orlando (USA) 12-15 febbraio 2018) [10.1007/978-3-319-74654-8_7]. | 1-gen-2018 | MASHAYEKHI, FAHIMEHStefano Zucca + | - |
| A reduced order model for nonlinear dynamics of mistuned bladed disks with shroud friction contacts / Pourkiaee, S., Zucca, S.. - ELETTRONICO. - 7C:(2018), p. V07CT35A005. (ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT 2018 Oslo (Norway) June 11–15, 2018) [10.1115/GT2018-75223]. | 1-gen-2018 | Pourkiaee, SeyyedMehrdadZucca, Stefano | 2018 - Turbo Expo.pdf |
| A sensitivity based heuristic for optimal blade arrangement in a linear mistuned rotor / Mitra, M., Bayrak, A.E., Zucca, S., Epureanu, B.I.. - ELETTRONICO. - 2:(2018). (ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT 2018 Oslo (Norway) June 11–15, 2018) [10.1115/GT201875542]. | 1-gen-2018 | Mitra, MainakZucca, StefanoEpureanu, Bogdan I. + | - |
| Effect of variation in contact friction on the performance of the under-platform dampers / Umer, M., Botto, D., Zucca, S.. - ELETTRONICO. - 4:(2018), pp. 2559-2566. (26th International Congress on Sound and Vibration, ICSV 2019 can 2019). | 1-gen-2018 | Umer M.Botto D.Zucca S. | full_paper_630.pdf |
| Relative cyclic component mode synthesis and its application to nonlinear vibration analysis of mistuned bladed disks with friction joints / Pourkiaee, S., Zucca, S., Parker, R.G.. - ELETTRONICO. - (2018), pp. 1893-1906. (28th International Conference on Noise and Vibration Engineering, ISMA 2018 and 7th International Conference on Uncertainty in Structural Dynamics, USD 2018 leuven (Belgium) 17 to 19 September, 20182018). | 1-gen-2018 | Pourkiaee, SeyyedMehrdadZucca, StefanoPARKER, ROBERT GLENN | - |
| Influence of actual static transmission error and contact ratio on gear engagement dynamics / Oliveri, L., Rosso, C., Zucca, S.. - ELETTRONICO. - 1:(2017), pp. 143-154. (35th IMAC Conference and Exposition on Structural Dynamics, 2017 Los Angeles (USA) Jan 30 - Feb 2, 2017) [10.1007/978-3-319-54404-5_15]. | 1-gen-2017 | OLIVERI, LEONARDOROSSO, CARLOZUCCA, Stefano | - |