Archivio Istituzionale della RicercaROSSETTO, Massimo
ROSSETTO, Massimo
Dipartimento di Ingegneria Meccanica e Aerospaziale
001503
On the notch sensitivity of as‐built Laser Beam Powder Bed–Fused AlSi10Mg specimens subjected to Very High Cycle Fatigue tests at ultrasonic frequency up to 109 cycles
2024 Tridello, Andrea; Boursier Niutta, Carlo; Benelli, Alessandro; Pagnoncelli, Ana Paula; Rossetto, Massimo; Berto, Filippo; Paolino, Davide Salvatore
Effect of Loading Frequency on the Fatigue Response of Adhesive Joints up to the VHCF Range
2023 Pederbelli, D; Goglio, L; Paolino, D; Rossetto, M; Tridello, A
Experimental scatter of the fatigue response of additively manufactured components: a statistical method based on the Profile Likelihood
2023 Tridello, A; Boursier Niutta, C; Rossetto, M; Berto, F; Paolino, D S
Statistical estimation of fatigue design curves from datasets involving failures from defects
2023 Tridello, A; Boursier Niutta, C; Rossetto, M; Berto, F; Paolino, Ds
Duplex LCF-VHCF P-S-N design curves: a methodology based on the Maximum Likelihood Principle
2022 Tridello, A.; Boursier Niutta, C.; Berto, F.; Rossetto, M.; Paolino, D. S.
Size-effects affecting the fatigue response up to 109 cycles (VHCF) of SLM AlSi10Mg specimens produced in horizontal and vertical directions
2022 Tridello, A.; Fiocchi, J.; Biffi, C. A.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
Statistical models for estimating the fatigue life, the stress–life relation, and the P-S–N curves of metallic materials in Very High Cycle Fatigue: A review
2022 Tridello, A.; Boursier Niutta, C.; Rossetto, M.; Berto, F.; Paolino, D. S.
Development of specific heat treatments for aluminum alloys produced by SLM: Effect on residual stresses and fatigue strength
2020 Biffi, C. A.; Fiocchi, J.; Tuissi, A.; Tridello, A.; Chiandussi, G.; Rossetto, M.; Paolino, D. S.; Colombo, C.; Vergani, L. M.
Effect of microstructure, residual stresses and building orientation on the fatigue response up to 109 cycles of an SLM AlSi10Mg alloy
2020 Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
Ultrasonic VHCF Tests on Very Large Specimens with Risk-Volume Up to 5000 mm3
2020 Tridello, Andrea; Paolino, Davide Salvatore; Rossetto, Massimo
An innovative testing technique for assessing the VHCF response of adhesively bonded joints
2019 Paolino, DAVIDE SALVATORE; Goglio, Luca; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
Influence of the annealing and defects on the VHCF behavior of an SLM AlSi10Mg alloy
2019 Tridello, Andrea; Fiocchi, Jacopo; Biffi, Carlo A.; Chiandussi, Giorgio; Rossetto, Massimo; Tuissi, Ausonio; Paolino, Davide S.
VHCF response of Gaussian SLM AlSi10Mg specimens: Effect of a stress relief heat treatment
2019 Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
VHCF response of heat-treated SLM Ti6Al4V Gaussian specimens with large loaded volume
2019 Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
VHCF Response up to 109 Cycles of SLM AlSi10Mg Specimens Built in a Vertical Direction
2019 Paolino, Davide S.; Tridello, Andrea; Fiocchi, Jacopo; Biffi, Carlo A.; Chiandussi, Giorgio; Rossetto, Massimo; Tuissi, Ausonio
Estimation of P-S-N curves in very-high-cycle fatigue: Statistical procedure based on a general crack growth rate model
2018 Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
Ultrasonic Very High Cycle Fatigue (VHCF) tests on a cyanoacrylate and on a high strength epoxy adhesive
2018 Tridello, A.; Paolino, D. S.; Goglio, L.; Chiandussi, G.; Rossetto, M.
VHCF response of as-built SLM AlSi10Mg specimens with large loaded volume
2018 Tridello, A.; Biffi, C. A.; Fiocchi, J.; Bassani, P.; Chiandussi, G.; Rossetto, M.; Ausonio, Tuissi; Paolino, D. S.
VHCF response of Gaussian SLM AlSi10Mg specimens: Effect of stress relieve heat treatment
2018 Tridello, A.; Biffi, C. A.; Fiocchi, J.; Bassani, P.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
A general model for crack growth from initial defect in Very-High-Cycle Fatigue
2017 Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| On the notch sensitivity of as‐built Laser Beam Powder Bed–Fused AlSi10Mg specimens subjected to Very High Cycle Fatigue tests at ultrasonic frequency up to 109 cycles / Tridello, Andrea; Boursier Niutta, Carlo; Benelli, Alessandro; Pagnoncelli, Ana Paula; Rossetto, Massimo; Berto, Filippo; Paolino, Davide Salvatore. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - (2024), pp. 1-16. [10.1111/ffe.14419] | 1-gen-2024 | Tridello, AndreaBoursier Niutta, CarloBenelli, AlessandroPagnoncelli, Ana PaulaRossetto, MassimoPaolino, Davide Salvatore + | Fatigue Fract Eng Mat Struct - 2024 - Tridello - On the notch sensitivity of as‐built Laser Beam Powder Bed Fused AlSi10Mg.pdf |
| Effect of Loading Frequency on the Fatigue Response of Adhesive Joints up to the VHCF Range / Pederbelli, D; Goglio, L; Paolino, D; Rossetto, M; Tridello, A. - In: APPLIED SCIENCES. - ISSN 2076-3417. - 13:23(2023). [10.3390/app132312967] | 1-gen-2023 | Pederbelli, DGoglio, LPaolino, DRossetto, MTridello, A | - |
| Experimental scatter of the fatigue response of additively manufactured components: a statistical method based on the Profile Likelihood / Tridello, A; Boursier Niutta, C; Rossetto, M; Berto, F; Paolino, D S. - In: SCIENTIFIC REPORTS. - ISSN 2045-2322. - 13:1(2023), p. 15335. [10.1038/s41598-023-40249-8] | 1-gen-2023 | Tridello, ABoursier Niutta, CRossetto, MPaolino, D S + | Scientific_Reports2023.pdf |
| Statistical estimation of fatigue design curves from datasets involving failures from defects / Tridello, A; Boursier Niutta, C; Rossetto, M; Berto, F; Paolino, Ds. - In: INTERNATIONAL JOURNAL OF FATIGUE. - ISSN 0142-1123. - 176:(2023), p. 107882. [10.1016/j.ijfatigue.2023.107882] | 1-gen-2023 | Tridello, ABoursier Niutta, CRossetto, MPaolino, DS + | IJF2023.pdf |
| Duplex LCF-VHCF P-S-N design curves: a methodology based on the Maximum Likelihood Principle / Tridello, A.; Boursier Niutta, C.; Berto, F.; Rossetto, M.; Paolino, D. S.. - In: PROCEDIA STRUCTURAL INTEGRITY. - ISSN 2452-3216. - 42:(2022), pp. 1320-1327. (Intervento presentato al convegno ECF23, European Conference on Fracture 2022 tenutosi a Funchal, Madeira, Portugal nel une 27 – July 1, 2022) [10.1016/j.prostr.2022.12.168]. | 1-gen-2022 | Tridello A.Boursier Niutta C.Rossetto M.Paolino D. S. + | 2023_DuplexPSNcurves_ECF23.pdf |
| Size-effects affecting the fatigue response up to 109 cycles (VHCF) of SLM AlSi10Mg specimens produced in horizontal and vertical directions / Tridello, A.; Fiocchi, J.; Biffi, C. A.; Rossetto, M.; Tuissi, A.; Paolino, D. S.. - In: INTERNATIONAL JOURNAL OF FATIGUE. - ISSN 0142-1123. - 160:(2022), p. 106825. [10.1016/j.ijfatigue.2022.106825] | 1-gen-2022 | A. TridelloM. RossettoD. S. Paolino + | Post_print.pdf; 1-s2.0-S0142112322001001-main.pdf |
| Statistical models for estimating the fatigue life, the stress–life relation, and the P-S–N curves of metallic materials in Very High Cycle Fatigue: A review / Tridello, A.; Boursier Niutta, C.; Rossetto, M.; Berto, F.; Paolino, D. S.. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - STAMPA. - 45:2(2022), pp. 332-370. [10.1111/ffe.13610] | 1-gen-2022 | Tridello A.Boursier Niutta C.Rossetto M.Paolino D. S. + | FFEMS_2022a_red.pdf |
| Development of specific heat treatments for aluminum alloys produced by SLM: Effect on residual stresses and fatigue strength / Biffi, C. A.; Fiocchi, J.; Tuissi, A.; Tridello, A.; Chiandussi, G.; Rossetto, M.; Paolino, D. S.; Colombo, C.; Vergani, L. M.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - STAMPA. - 112:2(2020), pp. 38-45. | 1-gen-2020 | Tuissi A.Tridello A.Chiandussi G.Rossetto M.Paolino D. S. + | MetIt_2020.pdf |
| Effect of microstructure, residual stresses and building orientation on the fatigue response up to 109 cycles of an SLM AlSi10Mg alloy / Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.. - In: INTERNATIONAL JOURNAL OF FATIGUE. - ISSN 0142-1123. - STAMPA. - 137:(2020), p. 105659. [10.1016/j.ijfatigue.2020.105659] | 1-gen-2020 | Tridello A.Chiandussi G.Rossetto M.Tuissi A.Paolino D. S. + | IJF_2020_CNR.pdf |
| Ultrasonic VHCF Tests on Very Large Specimens with Risk-Volume Up to 5000 mm3 / Tridello, Andrea; Paolino, Davide Salvatore; Rossetto, Massimo. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 10:7(2020), p. 2210. [10.3390/app10072210] | 1-gen-2020 | Tridello, AndreaPaolino, Davide SalvatoreRossetto, Massimo | ApplSci_2020.pdf |
| An innovative testing technique for assessing the VHCF response of adhesively bonded joints / Paolino, DAVIDE SALVATORE; Goglio, Luca; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo. - ELETTRONICO. - 14:(2019), pp. 340-345. (Intervento presentato al convegno VHCF7 Seventh International Conference on Very High Cycle Fatigue tenutosi a Dresda (Germania) nel da 3/07/2017 a 5/07/2017). | 1-gen-2019 | Davide PaolinoLuca GoglioAndrea TridelloGiorgio ChiandussiMassimo Rossetto | AN INNOVATIVE TESTING TECHNIQUE FOR ASSESSING THE VHCF RESPONSE OF ADHESIVELY BONDED JOINTS.pdf |
| Influence of the annealing and defects on the VHCF behavior of an SLM AlSi10Mg alloy / Tridello, Andrea; Fiocchi, Jacopo; Biffi, Carlo A.; Chiandussi, Giorgio; Rossetto, Massimo; Tuissi, Ausonio; Paolino, Davide S.. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - STAMPA. - 42:12(2019), pp. 2794-2807. [10.1111/ffe.13123] | 1-gen-2019 | Tridello, AndreaChiandussi, GiorgioRossetto, MassimoPaolino, Davide S. + | Tridello_et_al-2019-Fatigue_&_Fracture_of_Engineering_Materials_&_Structures.pdf; Manuscript_review_DEF_PostPrint.pdf |
| VHCF response of Gaussian SLM AlSi10Mg specimens: Effect of a stress relief heat treatment / Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.. - In: INTERNATIONAL JOURNAL OF FATIGUE. - ISSN 0142-1123. - STAMPA. - 124:(2019), pp. 435-443. [10.1016/j.ijfatigue.2019.02.020] | 1-gen-2019 | Tridello, A.Chiandussi, G.Rossetto, M.Paolino, D. S. + | Tridello2019_IJF.pdf; IJF2019.pdf |
| VHCF response of heat-treated SLM Ti6Al4V Gaussian specimens with large loaded volume / Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.. - In: PROCEDIA STRUCTURAL INTEGRITY. - ISSN 2452-3216. - ELETTRONICO. - 18:(2019), pp. 314-321. [10.1016/j.prostr.2019.08.171] | 1-gen-2019 | Tridello, A.Chiandussi, G.Rossetto, M.Paolino, D. S. + | 1-s2.0-S2452321619303816-main.pdf |
| VHCF Response up to 109 Cycles of SLM AlSi10Mg Specimens Built in a Vertical Direction / Paolino, Davide S.; Tridello, Andrea; Fiocchi, Jacopo; Biffi, Carlo A.; Chiandussi, Giorgio; Rossetto, Massimo; Tuissi, Ausonio. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 9:15(2019), pp. 1-13. [10.3390/app9152954] | 1-gen-2019 | Paolino, Davide S.Tridello, AndreaChiandussi, GiorgioRossetto, Massimo + | applsci-09-02954.pdf |
| Estimation of P-S-N curves in very-high-cycle fatigue: Statistical procedure based on a general crack growth rate model / Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - STAMPA. - 41:4(2018), pp. 718-726. [10.1111/ffe.12715] | 1-gen-2018 | PAOLINO, Davide SalvatoreTRIDELLO, ANDREACHIANDUSSI, GIORGIOROSSETTO, Massimo | FFEMS_InPress_2.pdf; Manuscript_DP_ffems2017.pdf |
| Ultrasonic Very High Cycle Fatigue (VHCF) tests on a cyanoacrylate and on a high strength epoxy adhesive / Tridello, A.; Paolino, D. S.; Goglio, L.; Chiandussi, G.; Rossetto, M.. - CD-ROM. - (2018), pp. 265-267. (Intervento presentato al convegno 12th European Adhesion Conference and 4th Luso-Brazilian Conference on Adhesion and Adhesives tenutosi a Lisbona (PT) nel 5-7 settembre 2018). | 1-gen-2018 | A. TridelloD. S. PaolinoL. GoglioG. ChiandussiM. Rossetto | - |
| VHCF response of as-built SLM AlSi10Mg specimens with large loaded volume / Tridello, A.; Biffi, C. A.; Fiocchi, J.; Bassani, P.; Chiandussi, G.; Rossetto, M.; Ausonio, Tuissi; Paolino, D. S.. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - ELETTRONICO. - 41:9(2018), pp. 1918-1928. [10.1111/ffe.12830] | 1-gen-2018 | A. TridelloG. ChiandussiM. RossettoD. S. Paolino + | Tridello_et_al_2018_FFEMS.pdf; FFEMS2018.pdf |
| VHCF response of Gaussian SLM AlSi10Mg specimens: Effect of stress relieve heat treatment / Tridello, A.; Biffi, C. A.; Fiocchi, J.; Bassani, P.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.. - ELETTRONICO. - (2018), pp. 1-338. (Intervento presentato al convegno XIX International Colloquium on Mechanical Fatigue of Metals tenutosi a Porto nel 05-07 September 2018). | 1-gen-2018 | A. TridelloG. ChiandussiM. RossettoD. S. Paolino + | Abstracts_ICMFM-XIX.pdf |
| A general model for crack growth from initial defect in Very-High-Cycle Fatigue / Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo. - In: PROCEDIA STRUCTURAL INTEGRITY. - ISSN 2452-3216. - STAMPA. - 3:(2017), pp. 411-423. [10.1016/j.prostr.2017.04.069] | 1-gen-2017 | PAOLINO, Davide SalvatoreTRIDELLO, ANDREACHIANDUSSI, GIORGIOROSSETTO, Massimo | PSI_2017.pdf |