CHIANDUSSI, GIORGIO
CHIANDUSSI, GIORGIO
Dipartimento di Ingegneria Meccanica e Aerospaziale
002574
A new methodology for thermostructural topology optimization: Analytical definition and validation
2021 Caivano, R; Tridello, A; Codegone, M; Chiandussi, G
Innovative formulation for topological fatigue optimisation based on material defects distribution and TopFat algorithm
2021 Gao, X.; Caivano, R.; Tridello, A.; Chiandussi, G.; Ma, H.; Paolino, D.; Berto, F.
Very high cycle fatigue (VHCF) response of additively manufactured materials: A review
2021 Caivano, Riccardo; Tridello, Andrea; Chiandussi, Giorgio; Qian, Guian; Paolino, Davide; Berto, Filippo
Development of specific heat treatments for aluminum alloys produced by SLM: Effect on residual stresses and fatigue strength
2020 Biffi, C. A.; Fiocchi, J.; Tuissi, A.; Tridello, A.; Chiandussi, G.; Rossetto, M.; Paolino, D. S.; Colombo, C.; Vergani, L. M.
Effect of microstructure, residual stresses and building orientation on the fatigue response up to 109 cycles of an SLM AlSi10Mg alloy
2020 Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
Evaluation of Pressure Distribution against Root Canal Walls of NiTi Rotary Instruments by Finite Element Analysis
2020 Carpegna, Giorgia; Alovisi, Mario; Paolino, Davide Salvatore; Marchetti, Andrea; Gibello, Umberto; Scotti, Nicola; Pasqualini, Damiano; Scattina, Alessandro; Chiandussi, Giorgio; Berutti, Elio
La perizia e la consulenza tecnica in materia ambientale e di sicurezza sul lavoro. Aspetti tecnico-ingegneristici. (Technical advice and consultancy within the context of environmental and safety at work field. Technical- engineering aspects)
2020 Chiandussi, Giorgio
Topology and fibre orientation simultaneous optimisation: A design methodology for fibre-reinforced composite components
2020 Caivano, R.; Tridello, A.; Paolino, D.; Chiandussi, G.
Working Length Transfer in the Endodontic Clinical Practice: A Comparative Study
2020 Alovisi, Mario; Dioguardi, Mario; Carossa, Massimo; Troiano, Giuseppe; Chiara Domini, Maria; Paolino, DAVIDE SALVATORE; Chiandussi, Giorgio; Berutti, Elio
An innovative testing technique for assessing the VHCF response of adhesively bonded joints
2019 Paolino, DAVIDE SALVATORE; Goglio, Luca; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
An innovative testing technique for assessing the VHCF response of adhesively bonded joints
2019 Tridello, A.; Paolino, D. S.; Chiandussi, G.; Goglio, L.
Influence of the annealing and defects on the VHCF behavior of an SLM AlSi10Mg alloy
2019 Tridello, Andrea; Fiocchi, Jacopo; Biffi, Carlo A.; Chiandussi, Giorgio; Rossetto, Massimo; Tuissi, Ausonio; Paolino, Davide S.
Modal dynamic analysis of a synchronizer mechanism: A numerical study
2019 Farokhi Nejad, A.; Chiandussi, G.; Moshrefzadeh, A.; Solimine, V.; Serra, A.; Rulfi, E.
Study of a synchronizer mechanism through multibody dynamic analysis
2019 FAROKHI NEJAD, Ali; Chiandussi, Giorgio
Valutazione della distribuzione delle pressioni generate da strumenti endodontici rotanti in nichel titanio sulle pareti canalari attraverso l'analisi agli elementi finiti
2019 Umberto, Gibello; Scattina, Alessandro; Paolino, DAVIDE SALVATORE; Chiandussi, Giorgio; Giorgia, Carpegna
VHCF response of Gaussian SLM AlSi10Mg specimens: Effect of a stress relief heat treatment
2019 Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
VHCF response of heat-treated SLM Ti6Al4V Gaussian specimens with large loaded volume
2019 Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.
VHCF Response up to 109 Cycles of SLM AlSi10Mg Specimens Built in a Vertical Direction
2019 Paolino, Davide S.; Tridello, Andrea; Fiocchi, Jacopo; Biffi, Carlo A.; Chiandussi, Giorgio; Rossetto, Massimo; Tuissi, Ausonio
Estimation of P-S-N curves in very-high-cycle fatigue: Statistical procedure based on a general crack growth rate model
2018 Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo
Ultrasonic Very High Cycle Fatigue (VHCF) tests on a cyanoacrylate and on a high strength epoxy adhesive
2018 Tridello, A.; Paolino, D. S.; Goglio, L.; Chiandussi, G.; Rossetto, M.
Citazione | Data di pubblicazione | Autori | File |
---|---|---|---|
A new methodology for thermostructural topology optimization: Analytical definition and validation / Caivano, R; Tridello, A; Codegone, M; Chiandussi, G. - In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART L, JOURNAL OF MATERIALS, DESIGN AND APPLICATIONS.. - ISSN 1464-4207. - ELETTRONICO. - 235:3(2021), pp. 481-500. [10.1177/1464420720970246] | 1-gen-2021 | Caivano, RTridello, ACodegone, MChiandussi, G | A new methodology_Caivano.pdf; Thermo-Structural topology optimisation.pdf |
Innovative formulation for topological fatigue optimisation based on material defects distribution and TopFat algorithm / Gao, X.; Caivano, R.; Tridello, A.; Chiandussi, G.; Ma, H.; Paolino, D.; Berto, F.. - In: INTERNATIONAL JOURNAL OF FATIGUE. - ISSN 0142-1123. - STAMPA. - 147:(2021), p. 106176. [10.1016/j.ijfatigue.2021.106176] | 1-gen-2021 | Gao X.Caivano R.Tridello A.Chiandussi G.Paolino D. + | Innovative formulation for topological fatigue optimisation based on material defects distribution and TopFat algorithm.pdf; Defect Driven Topology Optimisation (DDTO) (clean).pdf |
Very high cycle fatigue (VHCF) response of additively manufactured materials: A review / Caivano, Riccardo; Tridello, Andrea; Chiandussi, Giorgio; Qian, Guian; Paolino, Davide; Berto, Filippo. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - (2021). [10.1111/ffe.13567] | 1-gen-2021 | Caivano, RiccardoTridello, AndreaChiandussi, GiorgioPaolino, Davide + | Caivano 2021.pdf; VHCF on AM materials.pdf |
Development of specific heat treatments for aluminum alloys produced by SLM: Effect on residual stresses and fatigue strength / Biffi, C. A.; Fiocchi, J.; Tuissi, A.; Tridello, A.; Chiandussi, G.; Rossetto, M.; Paolino, D. S.; Colombo, C.; Vergani, L. M.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - STAMPA. - 112:2(2020), pp. 38-45. | 1-gen-2020 | Tuissi A.Tridello A.Chiandussi G.Rossetto M.Paolino D. S. + | MetIt_2020.pdf |
Effect of microstructure, residual stresses and building orientation on the fatigue response up to 109 cycles of an SLM AlSi10Mg alloy / Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.. - In: INTERNATIONAL JOURNAL OF FATIGUE. - ISSN 0142-1123. - STAMPA. - 137:(2020), p. 105659. [10.1016/j.ijfatigue.2020.105659] | 1-gen-2020 | Tridello A.Chiandussi G.Rossetto M.Tuissi A.Paolino D. S. + | IJF_2020_CNR.pdf |
Evaluation of Pressure Distribution against Root Canal Walls of NiTi Rotary Instruments by Finite Element Analysis / Carpegna, Giorgia; Alovisi, Mario; Paolino, Davide Salvatore; Marchetti, Andrea; Gibello, Umberto; Scotti, Nicola; Pasqualini, Damiano; Scattina, Alessandro; Chiandussi, Giorgio; Berutti, Elio. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 10:8(2020). [10.3390/app10082981] | 1-gen-2020 | Paolino, Davide SalvatoreScattina, AlessandroChiandussi, GiorgioBerutti, Elio + | ApplSci_2020_Endo.pdf |
La perizia e la consulenza tecnica in materia ambientale e di sicurezza sul lavoro. Aspetti tecnico-ingegneristici. (Technical advice and consultancy within the context of environmental and safety at work field. Technical- engineering aspects) / Chiandussi, Giorgio. - In: DIRITTO ED ECONOMIA DELL'IMPRESA. - ISSN 2499-3158. - ELETTRONICO. - 5:5I2020(2020), pp. 691-701. | 1-gen-2020 | Giorgio Chiandussi | La perizia e la consulenza tecbica in materia ambientale e di sicurezza sul lavoro Aspetti tecbico-ingegneristici.pdf |
Topology and fibre orientation simultaneous optimisation: A design methodology for fibre-reinforced composite components / Caivano, R.; Tridello, A.; Paolino, D.; Chiandussi, G.. - In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART L, JOURNAL OF MATERIALS, DESIGN AND APPLICATIONS.. - ISSN 1464-4207. - STAMPA. - 234:9(2020), pp. 1267-1279. [10.1177/1464420720934142] | 1-gen-2020 | Caivano R.Tridello A.Paolino D.Chiandussi G. | Topology and fiber_Caivano.pdf |
Working Length Transfer in the Endodontic Clinical Practice: A Comparative Study / Alovisi, Mario; Dioguardi, Mario; Carossa, Massimo; Troiano, Giuseppe; Chiara Domini, Maria; Paolino, DAVIDE SALVATORE; Chiandussi, Giorgio; Berutti, Elio. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 10:17(2020), pp. 1-7. [10.3390/app10175824] | 1-gen-2020 | Davide Salvatore PaolinoGiorgio ChiandussiElio Berutti + | applsci-10-05824.pdf |
An innovative testing technique for assessing the VHCF response of adhesively bonded joints / Paolino, DAVIDE SALVATORE; Goglio, Luca; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo. - ELETTRONICO. - 14:(2019), pp. 340-345. (Intervento presentato al convegno VHCF7 Seventh International Conference on Very High Cycle Fatigue tenutosi a Dresda (Germania) nel da 3/07/2017 a 5/07/2017). | 1-gen-2019 | Davide PaolinoLuca GoglioAndrea TridelloGiorgio ChiandussiMassimo Rossetto | AN INNOVATIVE TESTING TECHNIQUE FOR ASSESSING THE VHCF RESPONSE OF ADHESIVELY BONDED JOINTS.pdf |
An innovative testing technique for assessing the VHCF response of adhesively bonded joints / Tridello, A.; Paolino, D. S.; Chiandussi, G.; Goglio, L.. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - STAMPA. - 42:1(2019), pp. 84-96. [10.1111/ffe.12874] | 1-gen-2019 | Tridello, A.Paolino, D. S.Chiandussi, G.Goglio, L. | Tridello_et_al-2019-Fatigue_&_Fracture_of_Engineering_Materials_&_Structures.pdf |
Influence of the annealing and defects on the VHCF behavior of an SLM AlSi10Mg alloy / Tridello, Andrea; Fiocchi, Jacopo; Biffi, Carlo A.; Chiandussi, Giorgio; Rossetto, Massimo; Tuissi, Ausonio; Paolino, Davide S.. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - STAMPA. - 42:12(2019), pp. 2794-2807. [10.1111/ffe.13123] | 1-gen-2019 | Tridello, AndreaChiandussi, GiorgioRossetto, MassimoPaolino, Davide S. + | Tridello_et_al-2019-Fatigue_&_Fracture_of_Engineering_Materials_&_Structures.pdf; Manuscript_review_DEF_PostPrint.pdf |
Modal dynamic analysis of a synchronizer mechanism: A numerical study / Farokhi Nejad, A.; Chiandussi, G.; Moshrefzadeh, A.; Solimine, V.; Serra, A.; Rulfi, E.. - In: INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH. - ISSN 2278-0149. - STAMPA. - 8:3(2019), pp. 340-346. [10.18178/ijmerr.8.3.340-346] | 1-gen-2019 | Farokhi Nejad A.Chiandussi G.Moshrefzadeh A. + | modaldynamic.pdf |
Study of a synchronizer mechanism through multibody dynamic analysis / FAROKHI NEJAD, Ali; Chiandussi, Giorgio. - In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART D, JOURNAL OF AUTOMOBILE ENGINEERING. - ISSN 0954-4070. - ELETTRONICO. - 5:(2019), pp. 1-13. [10.1177/0954407018772238] | 1-gen-2019 | Ali Farokhi NejadGiorgio Chiandussi | IMechE-Part D.pdf |
Valutazione della distribuzione delle pressioni generate da strumenti endodontici rotanti in nichel titanio sulle pareti canalari attraverso l'analisi agli elementi finiti / Umberto, Gibello; Scattina, Alessandro; Paolino, DAVIDE SALVATORE; Chiandussi, Giorgio; Giorgia, Carpegna. - (2019). (Intervento presentato al convegno Moderna Endodonzia tra tecnologia ed esperienza tenutosi a Bologna nel 7-9 Novembre). | 1-gen-2019 | Alessandro ScattinaPaolino Davide SalvatoreGiorgio Chiandussi + | - |
VHCF response of Gaussian SLM AlSi10Mg specimens: Effect of a stress relief heat treatment / Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.. - In: INTERNATIONAL JOURNAL OF FATIGUE. - ISSN 0142-1123. - STAMPA. - 124:(2019), pp. 435-443. [10.1016/j.ijfatigue.2019.02.020] | 1-gen-2019 | Tridello, A.Chiandussi, G.Rossetto, M.Paolino, D. S. + | Tridello2019_IJF.pdf; IJF2019.pdf |
VHCF response of heat-treated SLM Ti6Al4V Gaussian specimens with large loaded volume / Tridello, A.; Fiocchi, J.; Biffi, C. A.; Chiandussi, G.; Rossetto, M.; Tuissi, A.; Paolino, D. S.. - In: PROCEDIA STRUCTURAL INTEGRITY. - ISSN 2452-3216. - ELETTRONICO. - 18:(2019), pp. 314-321. [10.1016/j.prostr.2019.08.171] | 1-gen-2019 | Tridello, A.Chiandussi, G.Rossetto, M.Paolino, D. S. + | 1-s2.0-S2452321619303816-main.pdf |
VHCF Response up to 109 Cycles of SLM AlSi10Mg Specimens Built in a Vertical Direction / Paolino, Davide S.; Tridello, Andrea; Fiocchi, Jacopo; Biffi, Carlo A.; Chiandussi, Giorgio; Rossetto, Massimo; Tuissi, Ausonio. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 9:15(2019), pp. 1-13. [10.3390/app9152954] | 1-gen-2019 | Paolino, Davide S.Tridello, AndreaChiandussi, GiorgioRossetto, Massimo + | applsci-09-02954.pdf |
Estimation of P-S-N curves in very-high-cycle fatigue: Statistical procedure based on a general crack growth rate model / Paolino, Davide Salvatore; Tridello, Andrea; Chiandussi, Giorgio; Rossetto, Massimo. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - STAMPA. - 41:4(2018), pp. 718-726. [10.1111/ffe.12715] | 1-gen-2018 | PAOLINO, Davide SalvatoreTRIDELLO, ANDREACHIANDUSSI, GIORGIOROSSETTO, Massimo | FFEMS_InPress_2.pdf; Manuscript_DP_ffems2017.pdf |
Ultrasonic Very High Cycle Fatigue (VHCF) tests on a cyanoacrylate and on a high strength epoxy adhesive / Tridello, A.; Paolino, D. S.; Goglio, L.; Chiandussi, G.; Rossetto, M.. - CD-ROM. - (2018), pp. 265-267. (Intervento presentato al convegno 12th European Adhesion Conference and 4th Luso-Brazilian Conference on Adhesion and Adhesives tenutosi a Lisbona (PT) nel 5-7 settembre 2018). | 1-gen-2018 | A. TridelloD. S. PaolinoL. GoglioG. ChiandussiM. Rossetto | - |