Context and Motivation: This research presents a comparative study regarding the implementation of different Anti-lock Braking Systems (ABS) strategies on a novel Zero Emission Driving System (ZEDS). The upcoming Euro 7 standard introduces stricter environmental regulations targeting the non-exhaust particulate emissions, specifically those generated by tires and brake pads. ZEDS is designed to meet these requirements, as it is equipped with an in-wheel Electric Motor (EM), whose torque action is combined with the controlled change of shear resistance provided by a MagnetoRheological Fluid (MRF), which does not produce any particulate matter during its use. Control and Modelling: The ZEDS model is derived from experimental characterization of an existing physical prototype, including the MRF response, which is faster (10-20 ms) than the one provided by the traditional hydraulic braking systems. This feature opens new approaches to wheel slip control, reaching high performance and safety levels in a wide range of external conditions. A PID controller, a First Order Sliding Mode Controller (FOSMC), and a Super-Twisting Sliding Mode Controller (STSMC) are calibrated and applied on a single-corner quarter car model, equipped with multiple tire representations, such as Pacejka, Burckhardt, and MF-Tire. In this study, the MF-Tire model showed instability in baseline simulations of braking actions, mostly in the latter phase, resulting in its exclusion from the control logic studies. The PID controller revealed its limitations in handling the nonlinear tire-road interaction, while the FOSMC exhibited undesirable mechanical chattering. The STSMC removed this oscillatory behaviour, keeping robustness against parameters uncertainty. Full-Vehicle Integration: Further studies are conducted through co-simulation integrating the MATLAB Simulink tire and control models with a VI-CarRealTime full-vehicle model, featuring ZEDS on all four corners. The ABS control algorithms are applied downstream of the high-level SAFEST controller. This logic provides safe torque blending across the vehicle’s corners and an energy-optimal torque split between the EM and the MRF Brake, taking into account actuator limits and battery SOC management. Results: The ABS Controllers are tested under different scenarios in terms of tire/road friction coefficients (ranging from high to low adherence), evaluated statically or dynamically, as in a mu-jump test. The STSMC proved superior by reducing the braking distance by 26% compared to the uncontrolled vehicle, outperforming the PID controller in terms of convergence speed and slip-tracking. The optimal slip target is maintained by the STSMC without exhibiting the control oscillations observed in the FOSMC. Conclusions and further studies: The Co-simulative approach demonstrates that nonlinear ABS control logics, particularly the STSMC, can work effectively together with the high-level SAFEST torque allocation strategy. The findings open new development paths for ZEDS safety control, leading, through Processor-In-Loop (PIL) and Hardware-In-Loop (HIL) validation, towards algorithm’s practical implementation and eventual road deployment of the system.

Comparative study of ABS Control Logic application for an Innovative Braking System / De Carlo, M., Cacciatore, M.F., De Carvalho Pinheiro, H., Carello, M.. - ELETTRONICO. - 2026 EuroBrake Conference Technical Proceedings:(In corso di stampa). (Eurobrake 2026 Mainz (DE) 2/6/2026).

Comparative study of ABS Control Logic application for an Innovative Braking System

De Carlo, Matteo;Cacciatore, Marco Francesco;De Carvalho Pinheiro, Henrique;Carello, Massimiliana
In corso di stampa

Abstract

Context and Motivation: This research presents a comparative study regarding the implementation of different Anti-lock Braking Systems (ABS) strategies on a novel Zero Emission Driving System (ZEDS). The upcoming Euro 7 standard introduces stricter environmental regulations targeting the non-exhaust particulate emissions, specifically those generated by tires and brake pads. ZEDS is designed to meet these requirements, as it is equipped with an in-wheel Electric Motor (EM), whose torque action is combined with the controlled change of shear resistance provided by a MagnetoRheological Fluid (MRF), which does not produce any particulate matter during its use. Control and Modelling: The ZEDS model is derived from experimental characterization of an existing physical prototype, including the MRF response, which is faster (10-20 ms) than the one provided by the traditional hydraulic braking systems. This feature opens new approaches to wheel slip control, reaching high performance and safety levels in a wide range of external conditions. A PID controller, a First Order Sliding Mode Controller (FOSMC), and a Super-Twisting Sliding Mode Controller (STSMC) are calibrated and applied on a single-corner quarter car model, equipped with multiple tire representations, such as Pacejka, Burckhardt, and MF-Tire. In this study, the MF-Tire model showed instability in baseline simulations of braking actions, mostly in the latter phase, resulting in its exclusion from the control logic studies. The PID controller revealed its limitations in handling the nonlinear tire-road interaction, while the FOSMC exhibited undesirable mechanical chattering. The STSMC removed this oscillatory behaviour, keeping robustness against parameters uncertainty. Full-Vehicle Integration: Further studies are conducted through co-simulation integrating the MATLAB Simulink tire and control models with a VI-CarRealTime full-vehicle model, featuring ZEDS on all four corners. The ABS control algorithms are applied downstream of the high-level SAFEST controller. This logic provides safe torque blending across the vehicle’s corners and an energy-optimal torque split between the EM and the MRF Brake, taking into account actuator limits and battery SOC management. Results: The ABS Controllers are tested under different scenarios in terms of tire/road friction coefficients (ranging from high to low adherence), evaluated statically or dynamically, as in a mu-jump test. The STSMC proved superior by reducing the braking distance by 26% compared to the uncontrolled vehicle, outperforming the PID controller in terms of convergence speed and slip-tracking. The optimal slip target is maintained by the STSMC without exhibiting the control oscillations observed in the FOSMC. Conclusions and further studies: The Co-simulative approach demonstrates that nonlinear ABS control logics, particularly the STSMC, can work effectively together with the high-level SAFEST torque allocation strategy. The findings open new development paths for ZEDS safety control, leading, through Processor-In-Loop (PIL) and Hardware-In-Loop (HIL) validation, towards algorithm’s practical implementation and eventual road deployment of the system.
In corso di stampa
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/3018120
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo