Data-driven Model Predictive Control for Lean NOx Trap Regeneration

Lean NOx Trap (LNT) is one of the most eective after-treatment technologies used to reduce NOx emissions of diesel engines. One relevant problem in this context is LNT regeneration timing control. This problem is indeed difficult due to the fact that LNTs are highly nonlinear systems, involving complex physical/chemical processes that are hard to model. In this paper, a novel data-driven model predictive control (D2-MPC) approach for regeneration timing of LNTs is proposed, allowing us to overcome these issues. This approach does not require a physical model of the engine/trap system but is based on low-complexity polynomial prediction model, directly identied from data. The regeneration timing is computed through an optimization algorithm, which uses the identied model to predict the LNT behavior. The proposed D2- MPC approach is tested in a co-simulation study, where the plant is represented by a detailed LNT model, developed using the well-known commercial tool AMEsim, and the controller is implemented in Matlab/Simulink.