he present paper aims at defining a numerical tool for the efficient design of the self-piercing riveting process by means of FE simulations. Abaqus Explicit v.6.4 software has been used to establish a model for 3D simulation of the joining process and of the shearing test on the riveted joint, in order to understand the joint formation and failure mechanisms. The obtained indications have been validated experimentally through joint sectioning and comparison between real geometry and numerical results. Furthermore, shear tests have been performed to compare the experimental and numerical results in terms of joint resistance.

FEM modeling of self-piercing riveted joint / Atzeni, Eleonora; Ippolito, Rosolino; Settineri, Luca. - 344:(2007), pp. 655-662. (Intervento presentato al convegno 12th International Conference on Sheet Metal tenutosi a Palermo (Italy) nel April 1st-4th 2007) [10.4028/0-87849-437-5.655].

FEM modeling of self-piercing riveted joint

ATZENI, ELEONORA;IPPOLITO, Rosolino;SETTINERI, Luca
2007

Abstract

he present paper aims at defining a numerical tool for the efficient design of the self-piercing riveting process by means of FE simulations. Abaqus Explicit v.6.4 software has been used to establish a model for 3D simulation of the joining process and of the shearing test on the riveted joint, in order to understand the joint formation and failure mechanisms. The obtained indications have been validated experimentally through joint sectioning and comparison between real geometry and numerical results. Furthermore, shear tests have been performed to compare the experimental and numerical results in terms of joint resistance.
2007
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/1650079
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo