Archivio Istituzionale della RicercaRIZZA, GIOVANNI
RIZZA, GIOVANNI
Dipartimento di Ingegneria Gestionale e della Produzione
051470
A Review of Ex-situ, In situ and Artificial Intelligence-based Thermographic Measurements in Additively Manufactured Parts
2025 Galati, M.; De Giorgi, S.; Rizza, G.; Tognoli, E.; Colombini, G.; Denti, L.; Bassoli, E.; Iuliano, L.
Characterization and Finite Element Analyses of Tensile and Bending Behavior of Nylon Reinforced with Continuous Carbon Fiber Produced by Additive Manufacturing
2025 Galati, M.; Minetola, P.; Rizza, G.
Detection of sub-superficial defects by infrared thermography in parts made by powder bed fusion with electron beam
2025 Defanti, Silvio; De Giorgi, Simone; Rizza, Giovanni; Colombini, Giulia; Denti, Lucia; Galati, Manuela
Detection of sub-superficial defects by infrared thermography in parts made by powder bed fusion with electron beam
2025 Defanti, Silvio; De Giorgi, Simone; Rizza, Giovanni; Colombini, Giulia; Tognoli, Emanuele; Ayberk Gürbüz, Ahmet; Denti, Lucia; Galati, Manuela; Iuliano, Luca
Effect of 3D grading thickness on mechanical and deformation behaviour of gyroid structures produced via powder bed fusion with electron beam
2025 Bruson, D.; Rizza, G.; Galati, M.
Effect of Rigid Body Motion in Phase Field Simulation of Sintering during Preheating at the Powder Bed Fusion with Electron Beam Conditions
2025 Rizza, Giovanni; Gardello, Luca; Galati, Manuela; Iuliano, Luca
Impact of contour on surface quality, dimensional and geometrical accuracy of Ti48Al2Cr2Nb parts produced with powder bed fusion with electron beam process
2025 Rizza, Giovanni; Galati, Manuela; Minetola, Paolo; Antonioni, Paolo; Bruson, Danilo; Marchiandi, Giovanni; Iuliano, Luca
Inspecting Defects of EB-PBF Components with Active Thermography and Deep Learning: A Feasibility Study
2025 Hosseini, Seyed Mohammad Mehdi; Depaoli, Fabio; Ponzio, Francesco; De Giorgi, Simone; Rizza, Giovanni; Tognoli, Emanuele; Colombini, Giulia; Galati, Manuela; Di Cataldo, Santa
Phase-field simulation of particles rigid body motion at the early stage of sintering in powder bed fusion with electron beam: A proposal for computational efficiency
2025 Galati, M.; Rizza, G.
A multiscale framework for the evaluation of thermal conductivity of sintered powder at the powder bed fusion with electron beam conditions
2024 Rizza, G.; Galati, M.; Iuliano, L.
Analytic evaluation of the thermal conductivity at the conditions of the powder bed fusion with electron beam (PBF-EB) additive manufacturing (AM) process
2024 Rizza, Giovanni; Galati, Manuela; Antonioni, Paolo; Iuliano, Luca
Numerical Analysis of Additively Manufactured Polymeric Lattice Structures Under Tensile Load
2024 Bruson, Danilo; Viccica, Marco; Rizza, Giovanni; Antonioni, Paolo; Iuliano, Luca; Galati, Manuela
Powder bed fusion with electron beam: The interplay of sintering, porosity, and coordination number in modelling the powder thermal conductivity through a novel tortuosity formulation
2024 Rizza, G.; Galati, M.
Effect of the Sintering Conditions on the Neck Growth during the Powder Bed Fusion with Electron Beam (PBF-EB) Process
2023 Rizza, G; Galati, M; Antonioni, P; Iuliano, L
Evaluation of the effective thermal conductivity of the unmelted powder particles during the electron beam powder bed fusion (EB-PBF) process
2023 Rizza, Giovanni; Galati, Manuela; Iuliano, Luca
Modelling of the powder sintering process and relative thermal conductivity variation during the electron beam powder bed fusion (PBF-EB)
2023 Rizza, Giovanni
A phase-field study of neck growth in electron beam powder bed fusion (EB-PBF) process of Ti6Al4V powders under different processing conditions
2022 Rizza, G.; Galati, M.; Iuliano, L.
An investigation on the processing conditions of Ti-6Al-2Sn-4Zr-2Mo by electron beam powder bed fusion: Microstructure, defect distribution, mechanical properties and dimensional accuracy
2022 Galati, M.; Defanti, S.; Saboori, A.; Rizza, G.; Tognoli, E.; Vincenzi, N.; Gatto, A.; Iuliano, L.
Investigation of surface shot blasting of AlSi10Mg and Ti6Al4V components produced by powder bed fusion technologies
2022 Calignano, Flaviana; Mercurio, Vincenza; Rizza, Giovanni; Galati, Manuela
Simulating the sintering of powder particles during the preheating step of Electron Beam Melting process: Review, challenges and a proposal
2022 Rizza, G.; Galati, M.; Iuliano, L.
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| A Review of Ex-situ, In situ and Artificial Intelligence-based Thermographic Measurements in Additively Manufactured Parts / Galati, M.; De Giorgi, S.; Rizza, G.; Tognoli, E.; Colombini, G.; Denti, L.; Bassoli, E.; Iuliano, L.. - In: JOURNAL OF NONDESTRUCTIVE EVALUATION. - ISSN 0195-9298. - ELETTRONICO. - 44:3(2025). [10.1007/s10921-025-01195-9] | 1-gen-2025 | Galati M.De Giorgi S.Rizza G.Iuliano L. + | s10921-025-01195-9.pdf |
| Characterization and Finite Element Analyses of Tensile and Bending Behavior of Nylon Reinforced with Continuous Carbon Fiber Produced by Additive Manufacturing / Galati, M.; Minetola, P.; Rizza, G.. - In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. - ISSN 1544-1024. - ELETTRONICO. - (2025). [10.1007/s11665-025-11934-8] | 1-gen-2025 | Galati M.Minetola P.Rizza G. | s11665-025-11934-8 (1).pdf |
| Detection of sub-superficial defects by infrared thermography in parts made by powder bed fusion with electron beam / Defanti, Silvio; De Giorgi, Simone; Rizza, Giovanni; Colombini, Giulia; Denti, Lucia; Galati, Manuela. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - ELETTRONICO. - (2025). [10.1007/s40964-025-01313-z] | 1-gen-2025 | De Giorgi, SimoneRizza, GiovanniGalati, Manuela + | s40964-025-01313-z.pdf |
| Detection of sub-superficial defects by infrared thermography in parts made by powder bed fusion with electron beam / Defanti, Silvio; De Giorgi, Simone; Rizza, Giovanni; Colombini, Giulia; Tognoli, Emanuele; Ayberk Gürbüz, Ahmet; Denti, Lucia; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 57:(2025), pp. 38-46. ( 17th Italian Manufacturing Association Conference, AITeM 2025 Bari (Italia) 10 September 2025 - 12 September 2025) [10.21741/9781644903735-5]. | 1-gen-2025 | Simone DE GIORGIGiovanni RIZZAManuela GalatiLuca Iuliano + | - |
| Effect of 3D grading thickness on mechanical and deformation behaviour of gyroid structures produced via powder bed fusion with electron beam / Bruson, D.; Rizza, G.; Galati, M.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9520. - ELETTRONICO. - (2025). [10.1007/s40964-025-01388-8] | 1-gen-2025 | Bruson D.Rizza G.Galati M. | s40964-025-01388-8.pdf |
| Effect of Rigid Body Motion in Phase Field Simulation of Sintering during Preheating at the Powder Bed Fusion with Electron Beam Conditions / Rizza, Giovanni; Gardello, Luca; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 169:(2025), pp. 21-26. ( 13th International Conference on Engineering and Innovative Materials, ICEIM 2024 and 6th International Conference on Advances in Materials, Mechanical and Manufacturing, AMMM 2024 Tokio (Japan) 6-8/09/2024) [10.4028/p-t7ow0y]. | 1-gen-2025 | Rizza, GiovanniGalati, ManuelaIuliano, Luca + | - |
| Impact of contour on surface quality, dimensional and geometrical accuracy of Ti48Al2Cr2Nb parts produced with powder bed fusion with electron beam process / Rizza, Giovanni; Galati, Manuela; Minetola, Paolo; Antonioni, Paolo; Bruson, Danilo; Marchiandi, Giovanni; Iuliano, Luca. - ELETTRONICO. - 57:(2025), pp. 11-19. ( Italian Manufacturing Association Conference - XVII AITeM Bari (Italia) 10-12/09/2025) [10.21741/9781644903735-2]. | 1-gen-2025 | Giovanni RIZZAManuela GALATIPaolo MINETOLAPaolo ANTONIONIDanilo BRUSONGiovanni MARCHIANDILuca IULIANO | - |
| Inspecting Defects of EB-PBF Components with Active Thermography and Deep Learning: A Feasibility Study / Hosseini, Seyed Mohammad Mehdi; Depaoli, Fabio; Ponzio, Francesco; De Giorgi, Simone; Rizza, Giovanni; Tognoli, Emanuele; Colombini, Giulia; Galati, Manuela; Di Cataldo, Santa. - (2025). ( 30th International Conference on Emerging Technologies and Factory Automation Porto (PT) 9th-12th September 2025) [10.1109/ETFA65518.2025.11205639]. | 1-gen-2025 | Hosseini, Seyed Mohammad MehdiDepaoli, FabioPonzio, FrancescoDe Giorgi, SimoneRizza, GiovanniGalati, ManuelaDi Cataldo, Santa + | Inspecting_Defects_of_EB-PBF_Components_with_Active_Thermography_and_Deep_Learning_A_Feasibility_Study.pdf |
| Phase-field simulation of particles rigid body motion at the early stage of sintering in powder bed fusion with electron beam: A proposal for computational efficiency / Galati, M.; Rizza, G.. - In: FINITE ELEMENTS IN ANALYSIS AND DESIGN. - ISSN 0168-874X. - ELETTRONICO. - 248:(2025). [10.1016/j.finel.2025.104359] | 1-gen-2025 | Galati M.Rizza G. | Published paper.pdf |
| A multiscale framework for the evaluation of thermal conductivity of sintered powder at the powder bed fusion with electron beam conditions / Rizza, G.; Galati, M.; Iuliano, L.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - ELETTRONICO. - (2024). [10.1007/s40964-023-00558-w] | 1-gen-2024 | Rizza G.Galati M.Iuliano L. | s40964-023-00558-w.pdf |
| Analytic evaluation of the thermal conductivity at the conditions of the powder bed fusion with electron beam (PBF-EB) additive manufacturing (AM) process / Rizza, Giovanni; Galati, Manuela; Antonioni, Paolo; Iuliano, Luca. - ELETTRONICO. - 126:(2024), pp. 585-590. ( 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2023 Naples (Italy) 12 July 2023 - 14 July 2023) [10.1016/j.procir.2024.08.244]. | 1-gen-2024 | Rizza, GiovanniGalati, ManuelaAntonioni, PaoloIuliano, Luca | - |
| Numerical Analysis of Additively Manufactured Polymeric Lattice Structures Under Tensile Load / Bruson, Danilo; Viccica, Marco; Rizza, Giovanni; Antonioni, Paolo; Iuliano, Luca; Galati, Manuela. - 437:(2024), pp. 532-539. (Intervento presentato al convegno Italian Workshop on Shell and Spatial Structures (IWSS 2023) tenutosi a Torino nel June 26-28, 2023) [10.1007/978-3-031-44328-2_55]. | 1-gen-2024 | Danilo BrusonMarco ViccicaGiovanni RizzaPaolo AntonioniLuca IulianoManuela Galati | - |
| Powder bed fusion with electron beam: The interplay of sintering, porosity, and coordination number in modelling the powder thermal conductivity through a novel tortuosity formulation / Rizza, G.; Galati, M.. - In: INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER. - ISSN 0017-9310. - ELETTRONICO. - 234:(2024). [10.1016/j.ijheatmasstransfer.2024.126055] | 1-gen-2024 | Rizza G.Galati M. | Published paper.pdf |
| Effect of the Sintering Conditions on the Neck Growth during the Powder Bed Fusion with Electron Beam (PBF-EB) Process / Rizza, G; Galati, M; Antonioni, P; Iuliano, L. - In: JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING. - ISSN 2504-4494. - ELETTRONICO. - 7:2(2023). [10.3390/jmmp7020055] | 1-gen-2023 | Rizza, GGalati, MAntonioni, PIuliano, L | jmmp-07-00055-v2.pdf |
| Evaluation of the effective thermal conductivity of the unmelted powder particles during the electron beam powder bed fusion (EB-PBF) process / Rizza, Giovanni; Galati, Manuela; Iuliano, Luca. - ELETTRONICO. - 118:(2023), pp. 765-770. ( 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ’22, Italy Ischia 13-15 Luglio 2022) [10.1016/j.procir.2023.06.131]. | 1-gen-2023 | Rizza, GiovanniGalati, ManuelaIuliano, Luca | 1-s2.0-S221282712300358X-main.pdf |
| Modelling of the powder sintering process and relative thermal conductivity variation during the electron beam powder bed fusion (PBF-EB) / Rizza, Giovanni. - (2023 Feb 07), pp. 1-109. | 7-feb-2023 | RIZZA, GIOVANNI | Thesis_Giovanni_Rizza_PDFa.pdf; Abstract_Giovanni_Rizza_PDFa.pdf |
| A phase-field study of neck growth in electron beam powder bed fusion (EB-PBF) process of Ti6Al4V powders under different processing conditions / Rizza, G.; Galati, M.; Iuliano, L.. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - (2022). [10.1007/s00170-022-10204-4] | 1-gen-2022 | Rizza G.Galati M.Iuliano L. | Rizza et al A PF study of neck growth in EB-PBF process of Ti6Al4V under different process conditions.pdf |
| An investigation on the processing conditions of Ti-6Al-2Sn-4Zr-2Mo by electron beam powder bed fusion: Microstructure, defect distribution, mechanical properties and dimensional accuracy / Galati, M.; Defanti, S.; Saboori, A.; Rizza, G.; Tognoli, E.; Vincenzi, N.; Gatto, A.; Iuliano, L.. - In: ADDITIVE MANUFACTURING. - ISSN 2214-8604. - ELETTRONICO. - 50:(2022), p. 102564. [10.1016/j.addma.2021.102564] | 1-gen-2022 | Galati M.Saboori A.Rizza G.Iuliano L. + | Final paper.pdf |
| Investigation of surface shot blasting of AlSi10Mg and Ti6Al4V components produced by powder bed fusion technologies / Calignano, Flaviana; Mercurio, Vincenza; Rizza, Giovanni; Galati, Manuela. - In: PRECISION ENGINEERING. - ISSN 0141-6359. - (2022). [10.1016/j.precisioneng.2022.07.008] | 1-gen-2022 | Flaviana CalignanoVincenza MercurioGiovanni RizzaManuela Galati | PRECISENG-D-22-00182_R1.pdf; Calignano et al_ Finitura.pdf |
| Simulating the sintering of powder particles during the preheating step of Electron Beam Melting process: Review, challenges and a proposal / Rizza, G.; Galati, M.; Iuliano, L.. - 112:(2022), pp. 388-393. (Intervento presentato al convegno 15th CIRP Conference on Intelligent Computation in Manufacturing Engineering, ICME 2021 tenutosi a Gulf of Naples, Italy nel 14-16 July 2021) [10.1016/j.procir.2022.09.025]. | 1-gen-2022 | Rizza G.Galati M.Iuliano L. | 1-s2.0-S2212827122011672-main.pdf |