Archivio Istituzionale della RicercaGOBBER, FEDERICO SIMONE
GOBBER, FEDERICO SIMONE
Dipartimento Scienza Applicata e Tecnologia
031144
Influence of atomizing gas and pressure on the metallurgical characteristics and environmental performance of K340 tool steel powder produced by vacuum induction melting inert gas atomization
2026 Kenevisi, Mohammad Saleh; Gobber, Federico Simone; Pashaei, Nazanin; Priarone, Paolo C.; Biamino, Sara; Ugues, Daniele
Parametric modeling of cradle-to-gate carbon emissions from gas-atomized AISI 316L powders under closed-loop feedstock strategies
2026 Priarone, Paolo C.; Gobber, Federico Simone; Cacace, Stefania
Design of a test rig for the characterization of friction and wear in hot-metal gas-forming of AA 5083 aluminium sheets
2025 Gobber, Federico Simone; Tancau, Alexandru; Scintilla, Leonardo Daniele; Fontana, Marco; Actis Grande, Marco
Effect of High Ni Content in Gas-Atomized Cu-Ni-Si Powders for Laser Powder Bed Fusion
2025 Trovato, Mirko; Arcieri, Nicolo; Manfredi, Diego; Gobber, Federico Simone; Bhatt, Bhaskaranand; Martucci, Alessandra; Biamino, Sara; Montanaro, Laura; Lombardi, Mariangela; Fino, Paolo
Evaluating the use of scrap metal to produce Al-5Cu-3Ti-1Cr-1Fe alloy powder for laser powder bed fusion
2025 Monti, Chiara; Gobber, Federico Simone; Turani, Matteo; Papis, Konrad; Priarone, Paolo C.; Actis Grande, Marco; Bambach, Markus
From Waste To Feedstock: Feasibility Of Recycling AA5183 Alloy Chips Into Powders For Additive Manufacturing
2025 Gobber, Federico Simone; Priarone, Paolo C.; Pennacchio, Antonio; Actis Grande, Marco
Production and Properties of Recycled Aluminium Alloy Powders via Inert Gas Atomisation
2025 Gobber, Federico Simone; Pennacchio, Antonio; Fracchia, Elisa; Actis-Grande, Marco
Properties of UNS S32760 Duplex Stainless Steels Powders and L-PBF Components as Function of Different Processing Gases
2025 Gobber, Federico Simone; Pennacchio, Antonio; Actis Grande, Marco
Surface topography and cross-section analysis of K340 cold work tool steel double-tracks deposited by directed energy deposition technique
2025 Kenevisi, Mohammad Saleh; Gobber, Federico Simone; Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio; Biamino, Sara; Ugues, Daniele
Tool steels and their additive manufacturing for fabrication and repair via PBF and DED processes: techniques, challenges, and applications
2025 Kenevisi, Mohammad Saleh; Gobber, Federico Simone; Fino, Paolo; Lombardi, Mariangela; Bondioli, Federica; Biamino, Sara; Ugues, Daniele
A numerical modeling framework for predicting the effects of operational parameters on particle size distribution in the gas atomization process for Nickel-Silicon alloys
2024 Hua, Jinsong; Gobber, Federico Simone; Actis Grande, Marco; Mortensen, Dag; Odden, Jan Ove
An Approach To Evaluate Quality And Sustainability For Powders Produced By A Lab – Scale Atomizer
2024 Simone Gobber, Federico; Pennacchio, Antonio; Actis Grande, Marco; Priarone, Paolo
Corrosion behavior of two Cu‐based shape memory alloys in NaCl solution: An electrochemical study
2024 Spotorno, Roberto; Fracchia, Elisa; Krancher, Christian; Krieg, Romina; Theiß, Ralf; Dültgen, Peter; Marco Pezzana, Francesco; Gobber, FEDERICO SIMONE; ACTIS GRANDE, Marco; Piccardo, Paolo
Coupling direct powder deposition with spark plasma sintering: a new approach towards rapid prototyping
2024 Airoldi, L.; Brucculeri, R.; Baldini, P.; Morganti, S.; Actis Grande, M.; Gobber, F. S.; Auricchio, F.; Anselmi-Tamburini, U.
Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys
2024 Bhatt, Bhaskaranand; Martucci, Alessandra; Virgillito, Enrico; Gobber, Federico; Bondioli, Federica; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo
Effect of inert gas pressure on the properties and carbon footprint of UNS S32760 powders made from waste materials by gas atomization
2024 Gobber, Federico Simone; Priarone, Paolo C.; Pennacchio, Antonio; Actis Grande, Marco
Improving laser powder bed fusion processability of pure Cu through powder functionalization with Ag
2024 Lupi, Giorgia; Poulin, Marcello; Gobber, Federico; Actis Grande, Marco; Casati, Riccardo
Influence of Atomizing Gas Pressure on Microstructure and Properties of Nickel Silicide Intended for Additive Manufacturing
2024 Ibrahim, Mohammad; Gobber, Federico Simone; Hulme, Christopher; Grasmo, Geir; Aune, Ragnhild E.
Processability of K340 Cold Work Tool Steel by Directed Energy Deposition Technique
2024 Kenevisi, Ms; Martelli, Pa; Gobber, Fs; Ugues, D; Biamino, S
Production Of High Silicon Aluminium Powders With Tailored CTE
2024 Simone Gobber, Federico; Lupi, Giorgia; Pennacchio, Antonio; Actis Grande, Marco; Casati, Riccardo
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Influence of atomizing gas and pressure on the metallurgical characteristics and environmental performance of K340 tool steel powder produced by vacuum induction melting inert gas atomization / Kenevisi, M.S., Gobber, F.S., Pashaei, N., Priarone, P.C., Biamino, S., Ugues, D.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - STAMPA. - 42:(2026), pp. 8898-8916. [10.1016/j.jmrt.2026.05.147] | 1-gen-2026 | Kenevisi, Mohammad SalehGobber, Federico SimonePashaei, NazaninPriarone, Paolo C.Biamino, SaraUgues, Daniele | - |
| Parametric modeling of cradle-to-gate carbon emissions from gas-atomized AISI 316L powders under closed-loop feedstock strategies / Priarone, P.C., Gobber, F.S., Cacace, S.. - In: POWDER TECHNOLOGY. - ISSN 0032-5910. - STAMPA. - 470:(2026), pp. 1-12. [10.1016/j.powtec.2025.121949] | 1-gen-2026 | Priarone, Paolo C.Gobber, Federico Simone + | Powder Technology 470 (2026) 121949.pdf |
| Design of a test rig for the characterization of friction and wear in hot-metal gas-forming of AA 5083 aluminium sheets / Gobber, F.S., Tancau, A., Scintilla, L.D., Fontana, M., Actis Grande, M.. - In: INTERNATIONAL JOURNAL OF LIGHTWEIGHT MATERIALS AND MANUFACTURE. - ISSN 2588-8404. - ELETTRONICO. - 8:2(2025), pp. 241-251. [10.1016/j.ijlmm.2024.09.002] | 1-gen-2025 | Gobber, Federico SimoneTancau, AlexandruActis Grande, Marco + | Design of a test rig for the characterization of friction and wear in hot metal gas forming of AA 5083 aluminum sheets.pdf |
| Effect of High Ni Content in Gas-Atomized Cu-Ni-Si Powders for Laser Powder Bed Fusion / Trovato, M., Arcieri, N., Manfredi, D., Gobber, F.S., Bhatt, B., Martucci, A., Biamino, S., Montanaro, L., Lombardi, M., Fino, P.. - In: MATERIALS. - ISSN 1996-1944. - 18:20(2025). [10.3390/ma18204772] | 1-gen-2025 | Trovato, MirkoArcieri, NicoloManfredi, DiegoGobber, Federico SimoneBhatt, BhaskaranandMartucci, AlessandraBiamino, SaraMontanaro, LauraLombardi, MariangelaFino, Paolo | materials-18-04772.pdf |
| Evaluating the use of scrap metal to produce Al-5Cu-3Ti-1Cr-1Fe alloy powder for laser powder bed fusion / Monti, C., Gobber, F.S., Turani, M., Papis, K., Priarone, P.C., Actis Grande, M., Bambach, M.. - In: SUSTAINABLE MATERIALS AND TECHNOLOGIES. - ISSN 2214-9937. - ELETTRONICO. - 45:(2025), pp. 1-13. [10.1016/j.susmat.2025.e01606] | 1-gen-2025 | Gobber, Federico SimonePriarone, Paolo C.Actis Grande, Marco + | Evaluating the use of scrap metal to produce Al-5Cu-3Ti-1Cr-1Fe alloy.pdf |
| From Waste To Feedstock: Feasibility Of Recycling AA5183 Alloy Chips Into Powders For Additive Manufacturing / Gobber, F.S., Priarone, P.C., Pennacchio, A., Actis Grande, M.. - ELETTRONICO. - (2025), pp. 1-7. (2025 Euro Powder Metallurgy Congress and Exhibition, Euro PM 2025 SEC (Scottish Event Campus) Center, gbr 2025) [10.59499/ep256764726]. | 1-gen-2025 | Gobber, Federico SimonePriarone, Paolo C.Pennacchio, AntonioActis Grande, Marco | - |
| Production and Properties of Recycled Aluminium Alloy Powders via Inert Gas Atomisation / Gobber, F.S., Pennacchio, A., Fracchia, E., Actis-Grande, M.. - In: FUNTAI OYOBI FUMMATSU YAKIN. - ISSN 0532-8799. - 72:Supplement(2025), pp. 531-536. [10.2497/jjspm.15c-t1-17] | 1-gen-2025 | Gobber, Federico SimonePennacchio, AntonioFracchia, ElisaActis-Grande, Marco | 72_15C-T1-17.pdf |
| Properties of UNS S32760 Duplex Stainless Steels Powders and L-PBF Components as Function of Different Processing Gases / Gobber, F.S., Pennacchio, A., Actis Grande, M.. - In: FUNTAI OYOBI FUMMATSU YAKIN. - ISSN 0532-8799. - 72:Supplement(2025), pp. 587-591. [10.2497/jjspm.15c-t1-27] | 1-gen-2025 | Gobber, Federico SimonePennacchio, AntonioActis Grande, Marco | en.pdf |
| Surface topography and cross-section analysis of K340 cold work tool steel double-tracks deposited by directed energy deposition technique / Kenevisi, M.S., Gobber, F.S., Maculotti, G., Genta, G., Galetto, M., Biamino, S., Ugues, D.. - In: CIRP - JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY. - ISSN 1755-5817. - 59:(2025), pp. 158-169. [10.1016/j.cirpj.2025.03.011] | 1-gen-2025 | Kenevisi, Mohammad SalehGobber, Federico SimoneMaculotti, GiacomoGenta, GianfrancoGaletto, MaurizioBiamino, SaraUgues, Daniele | Final version.pdf |
| Tool steels and their additive manufacturing for fabrication and repair via PBF and DED processes: techniques, challenges, and applications / Kenevisi, M.S., Gobber, F.S., Fino, P., Lombardi, M., Bondioli, F., Biamino, S., Ugues, D.. - In: MATERIALS & DESIGN. - ISSN 0264-1275. - 258:(2025). [10.1016/j.matdes.2025.114639] | 1-gen-2025 | Kenevisi, Mohammad SalehGobber, Federico SimoneFino, PaoloLombardi, MariangelaBondioli, FedericaBiamino, SaraUgues, Daniele | Final version_reduced_size.pdf |
| A numerical modeling framework for predicting the effects of operational parameters on particle size distribution in the gas atomization process for Nickel-Silicon alloys / Hua, J., Gobber, F.S., Actis Grande, M., Mortensen, D., Odden, J.O.. - In: POWDER TECHNOLOGY. - ISSN 0032-5910. - ELETTRONICO. - 435:(2024), pp. 1-18. [10.1016/j.powtec.2024.119408] | 1-gen-2024 | Gobber, Federico SimoneActis Grande, Marco + | A numerical modeling framework for predicting the effects of operational parameters on particle size distribution in the gas atomization process for Nickel-Silicon alloys.pdf |
| An Approach To Evaluate Quality And Sustainability For Powders Produced By A Lab – Scale Atomizer / Simone Gobber, F., Pennacchio, A., Actis Grande, M., Priarone, P.. - (2024). (2024 European Powder Metallurgy Congress and Exhibition, Euro PM 2024 Malmö (Sweden) 29 Sep -2 Oct 2024) [10.59499/ep246282648]. | 1-gen-2024 | Simone Gobber, FedericoPennacchio, AntonioActis Grande, MarcoPriarone, Paolo | EP246282648.pdf |
| Corrosion behavior of two Cu‐based shape memory alloys in NaCl solution: An electrochemical study / Spotorno, R., Fracchia, E., Krancher, C., Krieg, R., Theiß, R., Dültgen, P., Marco Pezzana, F., Gobber, F.S., ACTIS GRANDE, M., Piccardo, P.. - In: MATERIALS AND CORROSION. - ISSN 1521-4176. - ELETTRONICO. - (2024), pp. 1-18. [10.1002/maco.202314227] | 1-gen-2024 | Elisa FracchiaFederico Simone GobberMarco Actis Grande + | Accepted_Version.pdf; Materials Corrosion - 2024 - Spotorno - Corrosion behavior of two Cu‐based shape memory alloys in NaCl solution An.pdf |
| Coupling direct powder deposition with spark plasma sintering: a new approach towards rapid prototyping / Airoldi, L., Brucculeri, R., Baldini, P., Morganti, S., Actis Grande, M., Gobber, F.S., Auricchio, F., Anselmi-Tamburini, U.. - In: PROGRESS IN ADDITIVE MANUFACTURING. - ISSN 2363-9512. - ELETTRONICO. - (2024). [10.1007/s40964-023-00552-2] | 1-gen-2024 | Actis Grande, M.Gobber, F. S. + | s40964-023-00552-2.pdf |
| Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys / Bhatt, B., Martucci, A., Virgillito, E., Gobber, F., Bondioli, F., Manfredi, D., Lombardi, M., Fino, P.. - In: METALS. - ISSN 2075-4701. - 14:1(2024). [10.3390/met14010017] | 1-gen-2024 | Bhaskaranand BhattAlessandra MartucciEnrico VirgillitoFederico GobberFederica BondioliDiego ManfrediMariangela LombardiPaolo Fino | metals-14-00017.pdf |
| Effect of inert gas pressure on the properties and carbon footprint of UNS S32760 powders made from waste materials by gas atomization / Gobber, F.S., Priarone, P.C., Pennacchio, A., Actis Grande, M.. - In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY. - ISSN 2238-7854. - ELETTRONICO. - 33:(2024), pp. 8814-8828. [10.1016/j.jmrt.2024.11.195] | 1-gen-2024 | Gobber, Federico SimonePriarone, Paolo C.Pennacchio, AntonioActis Grande, Marco | 1-s2.0-S2238785424027236-main_compressed.pdf |
| Improving laser powder bed fusion processability of pure Cu through powder functionalization with Ag / Lupi, G., Poulin, M., Gobber, F., Actis Grande, M., Casati, R.. - In: POWDER TECHNOLOGY. - ISSN 0032-5910. - ELETTRONICO. - 444:(2024). [10.1016/j.powtec.2024.120044] | 1-gen-2024 | Gobber, FedericoActis Grande, Marco + | 1-s2.0-S0032591024006880-main.pdf |
| Influence of Atomizing Gas Pressure on Microstructure and Properties of Nickel Silicide Intended for Additive Manufacturing / Ibrahim, M., Gobber, F.S., Hulme, C., Grasmo, G., Aune, R.E.. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 14:8(2024). [10.3390/met14080930] | 1-gen-2024 | Gobber, Federico Simone + | metals-14-00930.pdf |
| Processability of K340 Cold Work Tool Steel by Directed Energy Deposition Technique / Kenevisi, M.s., Martelli, P.a., Gobber, F.s., Ugues, D., Biamino, S.. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - 1310:(2024). (44th Riso International Symposium on Materials Science (RISO) Roskilde (Denmark) SEP 02-06, 2024) [10.1088/1757-899x/1310/1/012021]. | 1-gen-2024 | Kenevisi, MSMartelli, PAGobber, FSUgues, DBiamino, S | Kenevisi_2024_IOP_Conf._Ser.__Mater._Sci._Eng._1310_012021.pdf |
| Production Of High Silicon Aluminium Powders With Tailored CTE / Simone Gobber, F., Lupi, G., Pennacchio, A., Actis Grande, M., Casati, R.. - (2024), pp. -6. (2024 European Powder Metallurgy Congress and Exhibition, Euro PM 2024 Malmö (Sweden) 29 Sep -2 Oct 2024) [10.59499/ep246282638]. | 1-gen-2024 | Simone Gobber, FedericoPennacchio, AntonioActis Grande, Marco + | EP246282638.pdf |