Archivio Istituzionale della RicercaBARBATO, GIULIO
Indentation modulus at the macro-scale level measured by Brinell and Vickers indenters by using the primary hardness standard machine at INRiM
2019 Schiavi, A.; Origlia, C.; Germak, A.; Barbato, G.; Maizza, G.; Genta, G.; Cagliero, R.; Coppola, G.
Instrumented Indentation Test in the Nano‑range: Performances Comparison of Testing Machines Calibration Methods
2019 Galetto, Maurizio; Maculotti, Giacomo; Genta, Gianfranco; Barbato, Giulio; Levi, Raffaello
Misurare per decidere. Misure e statistica di base.
2019 Barbato, Giulio; Germak, Alessandro; Genta, Gianfranco
Effect of contact stiffness and machine calibration in nano-indentation testing
2018 Genta, Gianfranco; Maculotti, Giacomo; Barbato, Giulio; Levi, Raffaello; Galetto, Maurizio
The accuracy of predicted acoustical parameters in ancient open-air theatres: A case study in Syracusae
2018 Bo, Elena; Shtrepi, Louena; Garcia, David Pelegrín; Barbato, Giulio; Aletta, Francesco; Astolfi, Arianna
Accuracy assessment of an industrial actuator
2017 Dalla Costa, Giuseppe; Genta, Gianfranco; Barbato, Giulio; De Chiffre, Leonardo; Hansen, Hans Norgaard
Ball-plate based calibration of a 3D laser triangulation scanner
2017 Verna, Elisa; Genta, Gianfranco; Minetola, Paolo; Barbato, Giulio; Galetto, Maurizio
Measurement of macro-scale indentation modulus using the primary hardness standard machines at INRiM
2017 Schiavi, Alessandro; Origlia, Claudio; Germak, Alessandro; Barbato, Giulio; Maizza, Giovanni; Genta, Gianfranco; Cagliero, Roberto; Coppola, Gianluca
Uncertainty evaluation of indentation modulus in the nano-range: Contact stiffness contribution
2017 Barbato, Giulio; Genta, Gianfranco; Cagliero, Roberto; Galetto, Maurizio; Klopfstein, Matthew J.; Lucca, Don A.; Levi, Raffaello
Accuracy of the random-incidence scattering coefficient measurement
2016 Shtrepi, Louena; Astolfi, Arianna; D'Antonio, Gianluca; Vannelli, Giuseppe; Barbato, Giulio; Mauro, Stefano; Prato, Andrea
Calibration procedure for a laser triangulation scanner with uncertainty evaluation
2016 Genta, Gianfranco; Minetola, Paolo; Barbato, Giulio
Design and metrological evaluation of the new 5 MN hexapod-shaped multicomponent build-up system
2016 Palumbo, Stefano; Germak, Alessandro; Mazzoleni, Fabrizio; Desogus, Sergio; Barbato, Giulio
Method for automatic alignment recovery of a spur gear
2016 Barbato, Giulio; Chiabert, Paolo; D'Antonio, Gianluca; DE MADDIS, Manuela; Lombardi, Franco; Ruffa, Suela
Metrological characterization of an hexapod-shaped Multicomponent Force Transducer
2016 Genta, Gianfranco; Germak, Alessandro; Barbato, Giulio; Levi, Raffaello
PLM-MES Integration: A Case-Study in Automotive Manufacturing
2016 D'Antonio, Gianluca; SAUZA BEDOLLA, Joel; Genta, Gianfranco; Ruffa, Suela; Barbato, Giulio; Chiabert, Paolo; Pasquettaz, Giorgio
Ultrasonic transparency of sonication tubes exposed to various frequencies: A metrological evaluation of modifications and uncertainty of acoustic pressures
2016 Erriu, Matteo; Genta, Gianfranco; Madonna Ripa, Daniele; Buogo, Silvano; Pili, Francesca Maria Giovanna; Piras, Vincenzo; Barbato, Giulio; Levi, Raffaello
Uncertainty evaluation of Ruiz parameter for spline coupling wear analysis
2016 Barbato, Giulio; Cuffaro, Vincenzo; Cura', Francesca Maria; Genta, Gianfranco; Mura, Andrea
Acoustical measurements in ancient theatres: uncertainty in prediction models
2015 Bo, Elena; Shtrepi, Louena; Pelegrin Garcia, David; Barbato, Giulio; Astolfi, Arianna
Measurement issues in probing depth evaluation of periodontal pockets: An in vitro study concerning main sources of uncertainty
2015 Genta, Gianfranco; Barbato, Giulio; Levi, Raffaello; Erriu, M.; Pili, F. M. G.
Measurement of elastic modulus by instrumented indentation in the macro-range: Uncertainty evaluation
2015 Cagliero, Roberto; Barbato, Giulio; Maizza, Giovanni; Genta, Gianfranco
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Indentation modulus at the macro-scale level measured by Brinell and Vickers indenters by using the primary hardness standard machine at INRiM / Schiavi, A.; Origlia, C.; Germak, A.; Barbato, G.; Maizza, G.; Genta, G.; Cagliero, R.; Coppola, G.. - In: ACTA IMEKO. - ISSN 0237-028X. - ELETTRONICO. - 8:1(2019), pp. 3-12. [10.21014/acta_imeko.v8i1.650] | 1-gen-2019 | Schiavi A.Germak A.Barbato G.Maizza G.Genta G. + | Indentation-modulus-at-the-macroscale-level-measured-by-Brinell-and-Vickers-indenters-by-using-the-primary-hardness-standard-machine-at-INRiM2019Acta-IMEKO.pdf |
| Instrumented Indentation Test in the Nano‑range: Performances Comparison of Testing Machines Calibration Methods / Galetto, Maurizio; Maculotti, Giacomo; Genta, Gianfranco; Barbato, Giulio; Levi, Raffaello. - In: NANOMANUFACTURING AND METROLOGY. - ISSN 2520-8128. - STAMPA. - 2:2(2019), pp. 91-99. [10.1007/s41871-019-00035-5] | 1-gen-2019 | Maurizio GalettoGiacomo MaculottiGianfranco GentaGiulio BarbatoRaffaello Levi | - |
| Misurare per decidere. Misure e statistica di base / Barbato, Giulio; Germak, Alessandro; Genta, Gianfranco. - STAMPA. - (2019). | 1-gen-2019 | Giulio BarbatoAlessandro GermakGianfranco Genta | - |
| Effect of contact stiffness and machine calibration in nano-indentation testing / Genta, Gianfranco; Maculotti, Giacomo; Barbato, Giulio; Levi, Raffaello; Galetto, Maurizio. - ELETTRONICO. - 78:(2018), pp. 208-212. (Intervento presentato al convegno 6th CIRP Global Web Conference “Envisaging the future manufacturing, design, technologies and systems in innovation era” tenutosi a Shantou (Cina) nel 23-25 ottobre 2018) [10.1016/j.procir.2018.08.313]. | 1-gen-2018 | Gianfranco GentaGiacomo MaculottiGiulio BarbatoRaffaello LeviMaurizio Galetto | - |
| The accuracy of predicted acoustical parameters in ancient open-air theatres: A case study in Syracusae / Bo, Elena; Shtrepi, Louena; Garcia, David Pelegrín; Barbato, Giulio; Aletta, Francesco; Astolfi, Arianna. - In: APPLIED SCIENCES. - ISSN 2076-3417. - ELETTRONICO. - 8:8(2018), p. 1393. [10.3390/app8081393] | 1-gen-2018 | Bo, ElenaShtrepi, LouenaBarbato, GiulioAstolfi, Arianna + | - |
| Accuracy assessment of an industrial actuator / Dalla Costa, Giuseppe; Genta, Gianfranco; Barbato, Giulio; De Chiffre, Leonardo; Hansen, Hans Norgaard. - ELETTRONICO. - 62:(2017), pp. 417-422. (Intervento presentato al convegno 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '16 tenutosi a Ischia (Italia) nel 20- 22 luglio 2016) [10.1016/j.procir.2016.06.119]. | 1-gen-2017 | GENTA, GIANFRANCOBARBATO, Giulio + | - |
| Ball-plate based calibration of a 3D laser triangulation scanner / Verna, Elisa; Genta, Gianfranco; Minetola, Paolo; Barbato, Giulio; Galetto, Maurizio. - STAMPA. - (2017). (Intervento presentato al convegno 2nd 3D Metrology Conference 2017 tenutosi a Aachen (Germania) nel 9-11 ottobre 2017). | 1-gen-2017 | Elisa VernaGianfranco GentaPaolo MinetolaGiulio BarbatoMaurizio Galetto | - |
| Measurement of macro-scale indentation modulus using the primary hardness standard machines at INRiM / Schiavi, Alessandro; Origlia, Claudio; Germak, Alessandro; Barbato, Giulio; Maizza, Giovanni; Genta, Gianfranco; Cagliero, Roberto; Coppola, Gianluca. - ELETTRONICO. - (2017). (Intervento presentato al convegno 13th Conference on the Measurement of Hardness, together with 23rd TC3 Conference on the Measurement of Force, Mass and Torque and 4th TC22 Conference on Vibration Measurement tenutosi a Helsinki (Finlandia) nel 30 maggio - 1 giugno 2017). | 1-gen-2017 | Alessandro SchiaviAlessandro GermakGiulio BarbatoGiovanni MaizzaGianfranco Genta + | - |
| Uncertainty evaluation of indentation modulus in the nano-range: Contact stiffness contribution / Barbato, Giulio; Genta, Gianfranco; Cagliero, Roberto; Galetto, Maurizio; Klopfstein, Matthew J.; Lucca, Don A.; Levi, Raffaello. - In: CIRP ANNALS. - ISSN 0007-8506. - STAMPA. - 66:1(2017), pp. 495-498. [10.1016/j.cirp.2017.04.060] | 1-gen-2017 | BARBATO, GiulioGENTA, GIANFRANCOGALETTO, MaurizioLEVI, Raffaello + | Published version - Barbato et al - CIRP GA 2017.pdf |
| Accuracy of the random-incidence scattering coefficient measurement / Shtrepi, Louena; Astolfi, Arianna; D'Antonio, Gianluca; Vannelli, Giuseppe; Barbato, Giulio; Mauro, Stefano; Prato, Andrea. - In: APPLIED ACOUSTICS. - ISSN 0003-682X. - STAMPA. - 106:(2016), pp. 23-35. [10.1016/j.apacoust.2015.12.021] | 1-gen-2016 | SHTREPI, LOUENAASTOLFI, AriannaD'ANTONIO, GIANLUCAVANNELLI, GiuseppeBARBATO, GiulioMAURO, STEFANOPRATO, ANDREA | - |
| Calibration procedure for a laser triangulation scanner with uncertainty evaluation / Genta, Gianfranco; Minetola, Paolo; Barbato, Giulio. - In: OPTICS AND LASERS IN ENGINEERING. - ISSN 0143-8166. - STAMPA. - 86:(2016), pp. 11-19. [10.1016/j.optlaseng.2016.05.005] | 1-gen-2016 | GENTA, GIANFRANCOMINETOLA, PAOLOBARBATO, Giulio | 1-s2.0-S0143816616300744-main.pdf |
| Design and metrological evaluation of the new 5 MN hexapod-shaped multicomponent build-up system / Palumbo, Stefano; Germak, Alessandro; Mazzoleni, Fabrizio; Desogus, Sergio; Barbato, Giulio. - In: METROLOGIA. - ISSN 0026-1394. - ELETTRONICO. - 53:3(2016), pp. 956-964. [10.1088/0026-1394/53/3/956] | 1-gen-2016 | Palumbo, StefanoGermak, AlessandroBarbato, Giulio + | - |
| Method for automatic alignment recovery of a spur gear / Barbato, Giulio; Chiabert, Paolo; D'Antonio, Gianluca; DE MADDIS, Manuela; Lombardi, Franco; Ruffa, Suela. - In: INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH. - ISSN 0020-7543. - 54:15(2016), pp. 4475-4486. [10.1080/00207543.2015.1064180] | 1-gen-2016 | BARBATO, GiulioCHIABERT, PaoloD'ANTONIO, GIANLUCADE MADDIS, MANUELALOMBARDI, FRANCORUFFA, SUELA | - |
| Metrological characterization of an hexapod-shaped Multicomponent Force Transducer / Genta, Gianfranco; Germak, Alessandro; Barbato, Giulio; Levi, Raffaello. - In: MEASUREMENT. - ISSN 0263-2241. - STAMPA. - 78:(2016), pp. 202-206. [10.1016/j.measurement.2015.09.054] | 1-gen-2016 | GENTA, GIANFRANCOGERMAK, ALESSANDROBARBATO, GiulioLEVI, Raffaello | - |
| PLM-MES Integration: A Case-Study in Automotive Manufacturing / D'Antonio, Gianluca; SAUZA BEDOLLA, Joel; Genta, Gianfranco; Ruffa, Suela; Barbato, Giulio; Chiabert, Paolo; Pasquettaz, Giorgio. - STAMPA. - 467:(2016), pp. 780-789. (Intervento presentato al convegno 12th IFIP WG 5.1 International Conference on Product Lifecycle Management in the Era of Internet of Things, PLM 2015 tenutosi a Doha; Qatar nel 9 October 2015 through 21 October 2015) [10.1007/978-3-319-33111-9_71]. | 1-gen-2016 | D'ANTONIO, GIANLUCASAUZA BEDOLLA, JOELGENTA, GIANFRANCORUFFA, SUELABARBATO, GiulioCHIABERT, Paolo + | - |
| Ultrasonic transparency of sonication tubes exposed to various frequencies: A metrological evaluation of modifications and uncertainty of acoustic pressures / Erriu, Matteo; Genta, Gianfranco; Madonna Ripa, Daniele; Buogo, Silvano; Pili, Francesca Maria Giovanna; Piras, Vincenzo; Barbato, Giulio; Levi, Raffaello. - In: MEASUREMENT. - ISSN 0263-2241. - STAMPA. - 80:(2016), pp. 148-153. [10.1016/j.measurement.2015.11.009] | 1-gen-2016 | GENTA, GIANFRANCOBARBATO, GiulioLEVI, Raffaello + | - |
| Uncertainty evaluation of Ruiz parameter for spline coupling wear analysis / Barbato, Giulio; Cuffaro, Vincenzo; Cura', Francesca Maria; Genta, Gianfranco; Mura, Andrea. - In: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART C, JOURNAL OF MECHANICAL ENGINEERING SCIENCE. - ISSN 0954-4062. - STAMPA. - 230:16(2016), pp. 2888-2895. [10.1177/0954406215603740] | 1-gen-2016 | BARBATO, GiulioCUFFARO, VINCENZOCURA', Francesca MariaGENTA, GIANFRANCOMURA, ANDREA | - |
| Acoustical measurements in ancient theatres: uncertainty in prediction models / Bo, Elena; Shtrepi, Louena; Pelegrin Garcia, David; Barbato, Giulio; Astolfi, Arianna. - ELETTRONICO. - Metrology for Archaeology - Proceedings Volume 1:(2015), pp. 106-111. (Intervento presentato al convegno 1st international conference of Metrology for Archaeology tenutosi a Benevento nel 21-23 Ottobre 2015). | 1-gen-2015 | BO, ELENASHTREPI, LOUENABARBATO, GiulioASTOLFI, Arianna + | - |
| Measurement issues in probing depth evaluation of periodontal pockets: An in vitro study concerning main sources of uncertainty / Genta, Gianfranco; Barbato, Giulio; Levi, Raffaello; Erriu, M.; Pili, F. M. G.. - ELETTRONICO. - (2015), pp. 501-506. (Intervento presentato al convegno 2015 IEEE International Symposium on Medical Measurements and Applications (MeMeA 2015) tenutosi a Torino nel 7-9 maggio 2015) [10.1109/MeMeA.2015.7145255]. | 1-gen-2015 | GENTA, GIANFRANCOBARBATO, GiulioLEVI, Raffaello + | - |
| Measurement of elastic modulus by instrumented indentation in the macro-range: Uncertainty evaluation / Cagliero, Roberto; Barbato, Giulio; Maizza, Giovanni; Genta, Gianfranco. - In: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES. - ISSN 0020-7403. - STAMPA. - 101-102:(2015), pp. 161-169. [10.1016/j.ijmecsci.2015.07.030] | 1-gen-2015 | CAGLIERO, ROBERTOBARBATO, GiulioMAIZZA, GiovanniGENTA, GIANFRANCO | - |