Archivio Istituzionale della RicercaFINO, PAOLO
FINO, PAOLO
Dipartimento Scienza Applicata e Tecnologia
003653
A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective
2024 Thangamani, Geethapriyan; Felicioni, Stefano; Padovano, Elisa; Biamino, Sara; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Bondioli, Federica
Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys
2024 Bhatt, Bhaskaranand; Martucci, Alessandra; Virgillito, Enrico; Gobber, Federico; Bondioli, Federica; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo
Directed energy deposition of 18NiM300 steel: effect of process and post processing conditions on microstructure and properties
2024 Felicioni, Stefano; Aversa, Alberta; Librera, Erica; Bondioli, Federica; Fino, Paolo
Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure
2024 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
Natural and artificial aging behaviour of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion: Strengthening mechanisms and failure analysis
2024 Barode, Jayant; Vayyala, Ashok; Aversa, Alberta; Yang, Luyan; Mayer, Joachim; Fino, Paolo; Lombardi, Mariangela
Design and Characterization of Innovative Gas-Atomized Al-Si-Cu-Mg Alloys for Additive Manufacturing
2023 Vanzetti, Matteo; Pavel, Michael J.; Williamson, C. Jacob; Padovano, Elisa; Pérez-Andrade, Lorena I.; Weaver, Mark; Brewer, Luke N.; Bondioli, Federica; Fino, Paolo
Improvement in the PBF-LB/M processing of the Al-Si-Cu-Mg composition through the use of pre-alloyed powder
2023 Martucci, A; Gobber, F; Aversa, A; Manfredi, D; Fino, P; Lombardi, M
Productivity Enhancement in Directed Energy Deposition: The Oscillating Scanning Strategy Approach
2023 Aversa, A; Carrozza, A; Marchese, G; Felicioni, S; De Chirico, M; Lombardi, M; Bondioli, F; Fino, P
Research Progress on Homogeneous Fabrication of Large-Area Perovskite Films by Spray Coating
2023 Ma, Sai; Sansoni, Simone; Gatti, Teresa; Fino, Paolo; Liu, Guilin; Lamberti, Francesco
Revisiting heat treatments for additive manufactured parts: a case study of A20X alloy
2023 Barode, Jayant; Vayyala, Ashok; Virgillito, Enrico; Aversa, Alberta; Mayer, Joachim; Fino, Paolo; Lombardi, Mariangela
Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion
2023 Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara
An investigation on the effect of different multi-step heat treatments on the microstructure, texture and mechanical properties of the DED-produced Ti-6Al-4V alloy
2022 Carrozza, Alessandro; Aversa, Alberta; Mazzucato, Federico; Bassini, Emilio; Manfredi, Diego; Biamino, Sara; Valente, Anna; Fino, Paolo
Effect of Aging and Cooling Path on the Super β-Transus Heat-Treated Ti-6Al-4V Alloy Produced via Electron Beam Melting (EBM)
2022 Carrozza, Alessandro; Marchese, Giulio; Saboori, Abdollah; Bassini, Emilio; Aversa, Alberta; Bondioli, Federica; Ugues, Daniele; Biamino, Sara; Fino, Paolo
Evaluation of a Laboratory-Scale Gas-Atomized AlSi10Mg Powder and a Commercial-Grade Counterpart for Laser Powder Bed Fusion Processing
2022 Marinucci, Fabrizio; Aversa, Alberta; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo
Hardness Evolution of Solution-Annealed LPBFed Inconel 625 Alloy under Prolonged Thermal Exposure
2022 Marinucci, Fabrizio; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Fino, Paolo; Ugues, Daniele; Biamino, Sara
In-situ alloying of a fine grained fully equiaxed Ti-based alloy via electron beam powder bed fusion additive manufacturing process
2022 Mosallanejad, M. H.; Niroumand, B.; Ghibaudo, C.; Biamino, S.; Salmi, A.; Fino, P.; Saboori, A.
Influence of surface finishing and heat treatments on the corrosion resistance of LPBF-produced Ti-6Al-4V alloy for biomedical applications
2022 Cabrini, M.; Carrozza, A.; Lorenzi, S.; Pastore, T.; Testa, C.; Manfredi, D.; Fino, P.; Scenini, F.
Low-Power Laser Powder Bed Fusion Processing of Scalmalloy®
2022 Martucci, Alessandra; Aversa, Alberta; Manfredi, Diego; Bondioli, Federica; Biamino, Sara; Ugues, Daniele; Lombardi, Mariangela; Fino, Paolo
Synergic strategies to improve the PBF-LB/M processability of a cracking-sensitive alloy
2022 Martucci, A; Aversa, A; Bondioli, F; Fino, P; Lombardi, M
Towards customized heat treatments and mechanical properties in the LPBF-processed Ti-6Al-2Sn-4Zr-6Mo alloy
2022 Carrozza, A.; Aversa, A.; Fino, P.; Lombardi, M.
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective / Thangamani, Geethapriyan; Felicioni, Stefano; Padovano, Elisa; Biamino, Sara; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Bondioli, Federica. - In: METALS. - ISSN 2075-4701. - 14:8(2024). [10.3390/met14080897] | 1-gen-2024 | Thangamani, GeethapriyanFelicioni, StefanoPadovano, ElisaBiamino, SaraLombardi, MariangelaUgues, DanieleFino, PaoloBondioli, Federica | metals-14-00897-v2.pdf |
| Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys / Bhatt, Bhaskaranand; Martucci, Alessandra; Virgillito, Enrico; Gobber, Federico; Bondioli, Federica; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo. - In: METALS. - ISSN 2075-4701. - 14:1(2024). [10.3390/met14010017] | 1-gen-2024 | Bhaskaranand BhattAlessandra MartucciEnrico VirgillitoFederico GobberFederica BondioliDiego ManfrediMariangela LombardiPaolo Fino | metals-14-00017.pdf |
| Directed energy deposition of 18NiM300 steel: effect of process and post processing conditions on microstructure and properties / Felicioni, Stefano; Aversa, Alberta; Librera, Erica; Bondioli, Federica; Fino, Paolo. - In: SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS. - ISSN 1468-6996. - 25:1(2024). [10.1080/14686996.2024.2346071] | 1-gen-2024 | Felicioni, StefanoAversa, AlbertaLibrera, EricaBondioli, FedericaFino, Paolo | Directed+energy+deposition+of+18NiM300+steel++effect+of+process+and+post+processing+conditions+on+microstructure+and+properties.pdf |
| Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure / Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 17:(2024). [10.3390/ma17184532] | 1-gen-2024 | Serena LerdaGiulio MarcheseEmilio BassiniMariangela LombardiDaniele UguesPaolo FinoSara Biamino | materials-17-04532.pdf |
| Natural and artificial aging behaviour of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion: Strengthening mechanisms and failure analysis / Barode, Jayant; Vayyala, Ashok; Aversa, Alberta; Yang, Luyan; Mayer, Joachim; Fino, Paolo; Lombardi, Mariangela. - In: MATERIALS TODAY COMMUNICATIONS. - ISSN 2352-4928. - 39:(2024), pp. 1-14. [10.1016/j.mtcomm.2024.108978] | 1-gen-2024 | Barode, JayantAversa, AlbertaFino, PaoloLombardi, Mariangela + | NA+and+AA+2.pdf |
| Design and Characterization of Innovative Gas-Atomized Al-Si-Cu-Mg Alloys for Additive Manufacturing / Vanzetti, Matteo; Pavel, Michael J.; Williamson, C. Jacob; Padovano, Elisa; Pérez-Andrade, Lorena I.; Weaver, Mark; Brewer, Luke N.; Bondioli, Federica; Fino, Paolo. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 13:11(2023), pp. 1-16. [10.3390/met13111845] | 1-gen-2023 | Vanzetti, MatteoPadovano, ElisaBondioli, FedericaFino, Paolo + | Vanzetti et al. - 2023 - Design and Characterization of Innovative Gas-Atom.pdf |
| Improvement in the PBF-LB/M processing of the Al-Si-Cu-Mg composition through the use of pre-alloyed powder / Martucci, A; Gobber, F; Aversa, A; Manfredi, D; Fino, P; Lombardi, M. - In: MATERIALS RESEARCH EXPRESS. - ISSN 2053-1591. - 10:4(2023), pp. 1-18. [10.1088/2053-1591/acc82f] | 1-gen-2023 | A MartucciF GobberA AversaD ManfrediP FinoM Lombardi | Martucci_2023_Mater._Res._Express_10_046508.pdf |
| Productivity Enhancement in Directed Energy Deposition: The Oscillating Scanning Strategy Approach / Aversa, A; Carrozza, A; Marchese, G; Felicioni, S; De Chirico, M; Lombardi, M; Bondioli, F; Fino, P. - In: METALS AND MATERIALS INTERNATIONAL. - ISSN 1598-9623. - 29:(2023), pp. 2040-2051. [10.1007/s12540-022-01356-9] | 1-gen-2023 | Aversa, ACarrozza, AMarchese, GFelicioni, SLombardi, MBondioli, FFino, P + | s12540-022-01356-9.pdf |
| Research Progress on Homogeneous Fabrication of Large-Area Perovskite Films by Spray Coating / Ma, Sai; Sansoni, Simone; Gatti, Teresa; Fino, Paolo; Liu, Guilin; Lamberti, Francesco. - In: CRYSTALS. - ISSN 2073-4352. - 13:2(2023), p. 216. [10.3390/cryst13020216] | 1-gen-2023 | Gatti, TeresaFino, Paolo + | crystals-13-00216.pdf |
| Revisiting heat treatments for additive manufactured parts: a case study of A20X alloy / Barode, Jayant; Vayyala, Ashok; Virgillito, Enrico; Aversa, Alberta; Mayer, Joachim; Fino, Paolo; Lombardi, Mariangela. - In: MATERIALS & DESIGN. - ISSN 1873-4197. - Volume 225:(2023). [10.1016/j.matdes.2022.111566] | 1-gen-2023 | Jayant BarodeEnrico VirgillitoAlberta AversaPaolo FinoMariangela Lombardi + | Revisiting heat treatment_A20X.pdf |
| Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion / Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; Fino, Paolo; Biamino, Sara. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 883:(2023). [10.1016/j.msea.2023.145508] | 1-gen-2023 | Lerda, SerenaMarchese,GiulioBassini, EmilioLombardi, MariangelaUgues, DanieleFino, PaoloBiamino, Sara | Manuscript_Understanding the microstructure and mechanical performance of heat-treated Inconel 625-TiC composite produced by laser powder bed fusion.pdf; 1-s2.0-S0921509323009322-main.pdf |
| An investigation on the effect of different multi-step heat treatments on the microstructure, texture and mechanical properties of the DED-produced Ti-6Al-4V alloy / Carrozza, Alessandro; Aversa, Alberta; Mazzucato, Federico; Bassini, Emilio; Manfredi, Diego; Biamino, Sara; Valente, Anna; Fino, Paolo. - In: MATERIALS CHARACTERIZATION. - ISSN 1044-5803. - ELETTRONICO. - 189:(2022), p. 111958. [10.1016/j.matchar.2022.111958] | 1-gen-2022 | Aversa, AlbertaBassini, EmilioManfredi, DiegoBiamino, SaraFino, Paolo + | 1-s2.0-S1044580322002406-main.pdf |
| Effect of Aging and Cooling Path on the Super β-Transus Heat-Treated Ti-6Al-4V Alloy Produced via Electron Beam Melting (EBM) / Carrozza, Alessandro; Marchese, Giulio; Saboori, Abdollah; Bassini, Emilio; Aversa, Alberta; Bondioli, Federica; Ugues, Daniele; Biamino, Sara; Fino, Paolo. - In: MATERIALS. - ISSN 1996-1944. - 15:12(2022), p. 4067. [10.3390/ma15124067] | 1-gen-2022 | Carrozza, AlessandroMarchese, GiulioSaboori, AbdollahBassini, EmilioAversa, AlbertaBondioli, FedericaUgues, DanieleBiamino, SaraFino, Paolo | materials-15-04067 (2).pdf |
| Evaluation of a Laboratory-Scale Gas-Atomized AlSi10Mg Powder and a Commercial-Grade Counterpart for Laser Powder Bed Fusion Processing / Marinucci, Fabrizio; Aversa, Alberta; Manfredi, Diego; Lombardi, Mariangela; Fino, Paolo. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 15:21(2022), p. 7565. [10.3390/ma15217565] | 1-gen-2022 | Marinucci, FabrizioAversa, AlbertaManfredi, DiegoLombardi, MariangelaFino, Paolo | materials-15-07565.pdf |
| Hardness Evolution of Solution-Annealed LPBFed Inconel 625 Alloy under Prolonged Thermal Exposure / Marinucci, Fabrizio; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Fino, Paolo; Ugues, Daniele; Biamino, Sara. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 12:11(2022), p. 1916. [10.3390/met12111916] | 1-gen-2022 | Marinucci, FabrizioMarchese, GiulioBassini, EmilioAversa, AlbertaFino, PaoloUgues, DanieleBiamino, Sara | metals-12-01916.pdf |
| In-situ alloying of a fine grained fully equiaxed Ti-based alloy via electron beam powder bed fusion additive manufacturing process / Mosallanejad, M. H.; Niroumand, B.; Ghibaudo, C.; Biamino, S.; Salmi, A.; Fino, P.; Saboori, A.. - In: ADDITIVE MANUFACTURING. - ISSN 2214-8604. - ELETTRONICO. - 56:(2022). [10.1016/j.addma.2022.102878] | 1-gen-2022 | Ghibaudo C.Biamino S.Salmi A.Fino P.Saboori A. + | In-situ alloying of a fine grained fully equiaxed Ti-based alloy via electron beam powder bed fusion additive manufacturing process.pdf |
| Influence of surface finishing and heat treatments on the corrosion resistance of LPBF-produced Ti-6Al-4V alloy for biomedical applications / Cabrini, M.; Carrozza, A.; Lorenzi, S.; Pastore, T.; Testa, C.; Manfredi, D.; Fino, P.; Scenini, F.. - In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY. - ISSN 0924-0136. - 308:(2022), p. 117730. [10.1016/j.jmatprotec.2022.117730] | 1-gen-2022 | Manfredi D.Fino P. + | 2022 - Cabrini - Influence of surface finishing and heat treatments of corrosion resitsance of Ti6Al4V by LPBF.pdf |
| Low-Power Laser Powder Bed Fusion Processing of Scalmalloy® / Martucci, Alessandra; Aversa, Alberta; Manfredi, Diego; Bondioli, Federica; Biamino, Sara; Ugues, Daniele; Lombardi, Mariangela; Fino, Paolo. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 15:9(2022), p. 3123. [10.3390/ma15093123] | 1-gen-2022 | Martucci, AlessandraAversa, AlbertaManfredi, DiegoBondioli, FedericaBiamino, SaraUgues, DanieleLombardi, MariangelaFino, Paolo | materials-15-03123-v2 (1).pdf |
| Synergic strategies to improve the PBF-LB/M processability of a cracking-sensitive alloy / Martucci, A; Aversa, A; Bondioli, F; Fino, P; Lombardi, M. - In: MATERIALS & DESIGN. - ISSN 0264-1275. - ELETTRONICO. - 224:(2022), p. 111396. [10.1016/j.matdes.2022.111396] | 1-gen-2022 | A MartucciA AversaF BondioliP FinoM Lombardi | 1-s2.0-S026412752201019X-main (1).pdf |
| Towards customized heat treatments and mechanical properties in the LPBF-processed Ti-6Al-2Sn-4Zr-6Mo alloy / Carrozza, A.; Aversa, A.; Fino, P.; Lombardi, M.. - In: MATERIALS & DESIGN. - ISSN 0264-1275. - ELETTRONICO. - 215:(2022), p. 110512. [10.1016/j.matdes.2022.110512] | 1-gen-2022 | Carrozza A.Aversa A.Fino P.Lombardi M. | Carrozza_Ti6246 HT.pdf |