Archivio Istituzionale della RicercaMARINO, Francesco
MARINO, Francesco
Dipartimento Scienza Applicata e Tecnologia
001947
Thermo-mechanical properties enhancement of bio-polyamides (PA10.10 and PA6.10) by using rice husk ash and nanoclay
2016 Battegazzore, Daniele; Salvetti, Oreste; Frache, Alberto; Peduto, Nicolangelo; De Sio, Anna; Marino, Francesco
Cellulose extracted from rice husk as filler for poly(lactic acid): preparation and characterization
2014 Battegazzore, Daniele; Bocchini, Sergio; Alongi, Jenny; Frache, Alberto; Marino, Francesco
Materials and technological aspects of gilded buckles from a North Eastern Medieval Italian context
2013 Gialanella, S.; Possenti, E.; Chateigner, D.; Lutterotti, L.; Marino, Francesco
Novel phosphorous-nitrogen intumescent flame retardant system. Its effects on flame retardancy and thermal properties of polypropylene
2013 Enescu, Daniela; Frache, Alberto; Lavaselli, M.; Monticelli, O.; Marino, Francesco
Cost effective glassy carbon brake pads solution for automotive systems
2012 Ambrosio, Elisa Paola; Pavese, Matteo; Biamino, Sara; Epicoco, Paolo; Tulliani, Jean Marc Christian; Fossati, P.; Marino, Francesco; Fino, Paolo
Semiconducting single-walled carbon nanotubes as radical photoinitiators
2011 Sangermano, Marco; Marino, Francesco; N., Reuel; M. S., Strano
Effect of microstructure on thermal expansion behaviour of nanocrystalline metallic materials
2010 Stefano, Gialanella; Marino, Francesco
The Libyan desert silica glass as a product of meteoritic impact: a new chemical-mechanical characterization
2009 Marta, Guzzafame; Marino, Francesco; Pugno, Nicola
Fatigue tests of un-HIP’ed gamma-TiAl engine valves for motorcycles
2006 Badami, Marco; Marino, Francesco
Towards a periodic table for the nanomechanical properties of the elements
2006 Pugno, Nicola; Marino, Francesco; Carpinteri, Alberto
Effects of low-cycle fatigue on bending properties and fracture toughness of un-HIP’ed Ti-47Al-2Cr-2Nb-1B intermetallic
2005 Marino, Francesco; A., Rebuffo; F., Sorrentino
Kinetic mechanism and microstructure during the formation of Si3N4/MoSiO2 composites
2003 Beruto, D.; Ferrari, A.; Giordani, M.; Marino, Francesco
Defect structures in FeAl B2 Alloys
2001 Gialanella, S.; Brusa, R. S.; Deng, W.; Marino, Francesco; Principi, G.; Spataru, T.
Preparation and mechanical properties of Al2O3/Ni3Al composites
1999 Sglavo, V.; Marino, Francesco; Zhang, B. R.
Post-hot-pressing and high-temperature bending strength of reaction-bonded Si3N4/MoSi2 and Si3N4/WSi2 composites
1998 B. R., Zhang; Marino, Francesco; V., Sglavo
In situ formation and high temperature reinforcing effect of MoSi2 and WSi2 on reaction-bonded Si3N4
1997 B. R., Zhang; Marino, Francesco; V., Sglavo; S., Gialanella
Ni3Al intermetallic compound as second phase in Al2O3 ceramic composites
1997 V., Sglavo; Marino, Francesco; B. R., Zhang; S., Gialanella
Reaction-bonding preparation of Si3N4/MoSi2 and Si3N4/WSi2 composites from elemental powders
1997 B. R., Zhang; Marino, Francesco
Processing and microstructural development of reaction-bonded sintering of a Si3N4/intermetallic composite
1996 Marino, Francesco; B. R., Zhang; B., Fornari
Reaction-bonding preparation of Si3N4/MoSi2 and Si3N4/WSi2 composites from elemental powders
1996 B. R., Zhang; Marino, Francesco
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Thermo-mechanical properties enhancement of bio-polyamides (PA10.10 and PA6.10) by using rice husk ash and nanoclay / Battegazzore, Daniele; Salvetti, Oreste; Frache, Alberto; Peduto, Nicolangelo; De Sio, Anna; Marino, Francesco. - In: COMPOSITES. PART A: APPLIED SCIENCE AND MANUFACTURING. - ISSN 1359-835X. - STAMPA. - 81:(2016), pp. 193-201. [10.1016/j.compositesa.2015.11.022] | 1-gen-2016 | BATTEGAZZORE, DANIELEFRACHE, ALBERTOMARINO, Francesco + | 1-s2.0-S1359835X15004327-main.pdf; Text_subm_composite_rev_2.pdf |
| Cellulose extracted from rice husk as filler for poly(lactic acid): preparation and characterization / Battegazzore, Daniele; Bocchini, Sergio; Alongi, Jenny; Frache, Alberto; Marino, Francesco. - In: CELLULOSE. - ISSN 0969-0239. - STAMPA. - 21:3(2014), pp. 1813-1821. [10.1007/s10570-014-0207-5] | 1-gen-2014 | BATTEGAZZORE, DANIELEBOCCHINI, SERGIOALONGI, JENNYFRACHE, ALBERTOMARINO, Francesco | - |
| Materials and technological aspects of gilded buckles from a North Eastern Medieval Italian context / Gialanella, S.; Possenti, E.; Chateigner, D.; Lutterotti, L.; Marino, Francesco. - In: APPLIED PHYSICS. A, MATERIALS SCIENCE & PROCESSING. - ISSN 0947-8396. - STAMPA. - 113:4(2013), pp. 1101-1108. [10.1007/s00339-013-7753-9] | 1-gen-2013 | MARINO, Francesco + | - |
| Novel phosphorous-nitrogen intumescent flame retardant system. Its effects on flame retardancy and thermal properties of polypropylene / Enescu, Daniela; Frache, Alberto; Lavaselli, M.; Monticelli, O.; Marino, Francesco. - In: POLYMER DEGRADATION AND STABILITY. - ISSN 0141-3910. - STAMPA. - 98:1(2013), pp. 297-305. [10.1016/j.polymdegradstab.2012.09.012] | 1-gen-2013 | ENESCU, DANIELAFRACHE, ALBERTOMARINO, Francesco + | - |
| Cost effective glassy carbon brake pads solution for automotive systems / Ambrosio, Elisa Paola; Pavese, Matteo; Biamino, Sara; Epicoco, Paolo; Tulliani, Jean Marc Christian; Fossati, P.; Marino, Francesco; Fino, Paolo. - In: ADVANCES IN APPLIED CERAMICS. - ISSN 1743-6753. - STAMPA. - 111:7(2012), pp. 427-432. [10.1179/1743676112Y.0000000016] | 1-gen-2012 | AMBROSIO, Elisa PaolaPAVESE, MATTEOBIAMINO, SARAEPICOCO, PAOLOTULLIANI, Jean Marc ChristianMARINO, FrancescoFINO, Paolo + | - |
| Semiconducting single-walled carbon nanotubes as radical photoinitiators / Sangermano, Marco; Marino, Francesco; N., Reuel; M. S., Strano. - In: MACROMOLECULAR CHEMISTRY AND PHYSICS. - ISSN 1022-1352. - STAMPA. - 212:(2011), pp. 1469-1473. [10.1002/macp.201100076] | 1-gen-2011 | SANGERMANO, MARCOMARINO, Francesco + | - |
| Effect of microstructure on thermal expansion behaviour of nanocrystalline metallic materials / Stefano, Gialanella; Marino, Francesco. - In: JOURNAL OF MATERIALS SCIENCE. - ISSN 0022-2461. - STAMPA. - 45:(2010), pp. 824-830. [10.1007/s10853-009-4006-6] | 1-gen-2010 | MARINO, Francesco + | - |
| The Libyan desert silica glass as a product of meteoritic impact: a new chemical-mechanical characterization / Marta, Guzzafame; Marino, Francesco; Pugno, Nicola. - In: SAHARA. - ISSN 1120-5679. - STAMPA. - 20:(2009), pp. 7-10. | 1-gen-2009 | MARINO, FrancescoPUGNO, Nicola + | - |
| Fatigue tests of un-HIP’ed gamma-TiAl engine valves for motorcycles / Badami, Marco; Marino, Francesco. - In: INTERNATIONAL JOURNAL OF FATIGUE. - ISSN 0142-1123. - 28:(2006), pp. 722-732. | 1-gen-2006 | BADAMI, MarcoMARINO, Francesco | - |
| Towards a periodic table for the nanomechanical properties of the elements / Pugno, Nicola; Marino, Francesco; Carpinteri, Alberto. - In: INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES. - ISSN 0020-7683. - 43:(2006), pp. 5647-5657. | 1-gen-2006 | PUGNO, NicolaMARINO, FrancescoCARPINTERI, Alberto | - |
| Effects of low-cycle fatigue on bending properties and fracture toughness of un-HIP’ed Ti-47Al-2Cr-2Nb-1B intermetallic / Marino, Francesco; A., Rebuffo; F., Sorrentino. - In: INTERNATIONAL JOURNAL OF FATIGUE. - ISSN 0142-1123. - 27:(2005), pp. 143-153. | 1-gen-2005 | MARINO, Francesco + | - |
| Kinetic mechanism and microstructure during the formation of Si3N4/MoSiO2 composites / Beruto, D.; Ferrari, A.; Giordani, M.; Marino, Francesco. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - A355:(2003), pp. 286-291. | 1-gen-2003 | MARINO, Francesco + | - |
| Defect structures in FeAl B2 Alloys / Gialanella, S.; Brusa, R. S.; Deng, W.; Marino, Francesco; Principi, G.; Spataru, T.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - 317-318:(2001), pp. 485-490. | 1-gen-2001 | MARINO, Francesco + | - |
| Preparation and mechanical properties of Al2O3/Ni3Al composites / Sglavo, V.; Marino, Francesco; Zhang, B. R.. - In: COMPOSITES SCIENCE AND TECHNOLOGY. - ISSN 0266-3538. - 59:(1999), pp. 1207-1212. | 1-gen-1999 | MARINO, Francesco + | - |
| Post-hot-pressing and high-temperature bending strength of reaction-bonded Si3N4/MoSi2 and Si3N4/WSi2 composites / B. R., Zhang; Marino, Francesco; V., Sglavo. - In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY. - ISSN 0002-7820. - 81:(1998), pp. 1344-1348. | 1-gen-1998 | MARINO, Francesco + | - |
| In situ formation and high temperature reinforcing effect of MoSi2 and WSi2 on reaction-bonded Si3N4 / B. R., Zhang; Marino, Francesco; V., Sglavo; S., Gialanella. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 239-240:1-2(1997), pp. 503-506. | 1-gen-1997 | MARINO, Francesco + | - |
| Ni3Al intermetallic compound as second phase in Al2O3 ceramic composites / V., Sglavo; Marino, Francesco; B. R., Zhang; S., Gialanella. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - 239-40:1-2(1997), pp. 665-671. | 1-gen-1997 | MARINO, Francesco + | - |
| Reaction-bonding preparation of Si3N4/MoSi2 and Si3N4/WSi2 composites from elemental powders / B. R., Zhang; Marino, Francesco. - In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY. - ISSN 0002-7820. - 80:(1997), pp. 269-272. | 1-gen-1997 | MARINO, Francesco + | - |
| Processing and microstructural development of reaction-bonded sintering of a Si3N4/intermetallic composite / Marino, Francesco; B. R., Zhang; B., Fornari. - In: JOURNAL OF MATERIALS SCIENCE. - ISSN 0022-2461. - 31:(1996), pp. 2447-2455. | 1-gen-1996 | MARINO, Francesco + | - |
| Reaction-bonding preparation of Si3N4/MoSi2 and Si3N4/WSi2 composites from elemental powders / B. R., Zhang; Marino, Francesco. - In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY. - ISSN 0002-7820. - 80:(1996), pp. 269-272. | 1-gen-1996 | MARINO, Francesco + | - |