Lightweight crash-resistant vehicle structures require aluminum alloys to be joined to 2000 MPa-class press-hardened steels (PHSs), for which conventional mechanical fastening and fusion welding are poorly suited, and no validated and energy-efficient process window is available. This study investigates friction element welding (FEW) of 2 mm AA6082-T6 to 2 mm Al-Si-coated 37MnB4 PHS. A phase-wise sequential design of experiments, gated by nine acceptance criteria, identified the parameters that minimize spindle energy. The selected cycle required 3148 ± 305 J and gave a shear-tension strength of 8.18 ± 0.94 kN (threshold: 7 kN), with the cleaning stage consuming about 70% of the energy. At the element/aluminum interface, an Al-enriched α-Fe solid-solution layer (10–60 μm) and a thin η-Fe₂Al₅ layer (< 5 μm) formed. In the steel sheet, hardness ranged from about 750 HV1 in the re-austenitized zone to 350 HV1 in the tempered zone. Raising the mean energy from 2672 to 3467 J enlarged the welded zone from 5.26 to 5.57 mm, shifted failure from brittle interfacial fracture to ductile pull-out through the tempered zone, and increased the strength from 7.52 to 9.40 kN and the absorbed energy from 8.76 to 12.75 J. The results establish laboratory-scale feasibility, while fatigue, corrosion, and process robustness remain to be assessed before industrial implementation.

Friction element welding of AA6082 aluminum to 2000 MPa press-hardened 37MnB4 steel for automotive applications / Russo Spena, P., Antal, G., Bagnasco, F.M., Razza, V., De Maddis, M.. - In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. - ISSN 0268-3768. - (2026). [10.1007/s00170-026-19488-2]

Friction element welding of AA6082 aluminum to 2000 MPa press-hardened 37MnB4 steel for automotive applications

Pasquale Russo Spena;Gabriel Antal;Filippo Maria Bagnasco;Valentino Razza;Manuela De Maddis
2026

Abstract

Lightweight crash-resistant vehicle structures require aluminum alloys to be joined to 2000 MPa-class press-hardened steels (PHSs), for which conventional mechanical fastening and fusion welding are poorly suited, and no validated and energy-efficient process window is available. This study investigates friction element welding (FEW) of 2 mm AA6082-T6 to 2 mm Al-Si-coated 37MnB4 PHS. A phase-wise sequential design of experiments, gated by nine acceptance criteria, identified the parameters that minimize spindle energy. The selected cycle required 3148 ± 305 J and gave a shear-tension strength of 8.18 ± 0.94 kN (threshold: 7 kN), with the cleaning stage consuming about 70% of the energy. At the element/aluminum interface, an Al-enriched α-Fe solid-solution layer (10–60 μm) and a thin η-Fe₂Al₅ layer (< 5 μm) formed. In the steel sheet, hardness ranged from about 750 HV1 in the re-austenitized zone to 350 HV1 in the tempered zone. Raising the mean energy from 2672 to 3467 J enlarged the welded zone from 5.26 to 5.57 mm, shifted failure from brittle interfacial fracture to ductile pull-out through the tempered zone, and increased the strength from 7.52 to 9.40 kN and the absorbed energy from 8.76 to 12.75 J. The results establish laboratory-scale feasibility, while fatigue, corrosion, and process robustness remain to be assessed before industrial implementation.
File in questo prodotto:
Non ci sono file associati a questo prodotto.
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/3017760
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo