The design of Human Landing Systems (HLS) for sustained lunar exploration requires concurrent evaluation of vehicle performance, mission feasibility, cost, and technological maturity from the earliest design phases. Existing conceptual design frameworks, however, address these dimensions sequentially: cost estimation and technology assessment are performed downstream of mission analysis and vehicle sizing, with no feedback loop to the design. This decoupling is particularly consequential for crew-critical subsystems such as the Environmental Control and Life Support System (ECLSS), whose feasibility depends strongly on technology maturity and which represents one of the principal bottlenecks to achieving a viable, closed-vehicle design. The iDREAM toolset, developed jointly by Politecnico di Torino and ESA, addresses this gap with a unified framework integrating conceptual vehicle design (ASTRID-H), life-cycle cost estimation (HyCost), and technology readiness assessment with roadmap generation (TRIS), supported by a common reference database. A first development phase validated the toolset against a reference micro-launcher at the system and subsystem levels. Furthermore, it explored the overall methodology through a pre-phase A sizing of a lunar lander, focusing on wet and dry mass closure and a simplified mission analysis routine without a detailed subsystem breakdown. This paper presents two methodological enhancements introduced in the second development phase. First, vehicle sizing and mission analysis are coupled in a closed iterative loop: reduced-order models for lunar orbit transfer, powered descent, and ascent compute the delta-v budget and propellant mass fractions, feeding back into ASTRID-H for resizing until mass convergence within 1%. Second, the sizing now iterates on subsystem-level mass, power, volume, and technology allocation. ECLSS is embedded directly within this loop as the subsystem that most constrains the overall design and differentiates crewed vehicles from unmanned ones, allowing the design to respond to ECLSS technology assumptions in real time during convergence. The converged design is then evaluated against the technology roadmapping and cost routines to assess whether available technologies can satisfy the subsystem-level requirements within programmatic constraints, enabling a sensitivity analysis linking technology-readiness-level assumptions, critical for regenerative life-support technologies, to programme cost and development schedule. Where no match exists between the design and the roadmap, an alternative technology selection and ECLSS closure is reinvestigated. Application to a reference HLS short-sortie mission to the lunar south pole demonstrates the framework, with focus on ECLSS mass sensitivity to mission duration and regeneration technology assumptions, and identification of the technology development priorities most strongly driving programme cost and schedule.

Enhancing the iDREAM Toolset for Human Lunar Lander Design: A Tightly Coupled Multidisciplinary Design Loop Integrating Mission Analysis, Cost Estimation, and Technology Roadmapping / Rimani, J., Luccisano, G., Fusaro, R., Viola, N., Steelant, J.. - ELETTRONICO. - (2026). (77th International Astronautical Congress (IAC 2026) Antalya (Türkiye) 5-9 October 2026).

Enhancing the iDREAM Toolset for Human Lunar Lander Design: A Tightly Coupled Multidisciplinary Design Loop Integrating Mission Analysis, Cost Estimation, and Technology Roadmapping

Rimani, Jasmine;Luccisano, Giacomo;Fusaro, Roberta;Viola, Nicole;
2026

Abstract

The design of Human Landing Systems (HLS) for sustained lunar exploration requires concurrent evaluation of vehicle performance, mission feasibility, cost, and technological maturity from the earliest design phases. Existing conceptual design frameworks, however, address these dimensions sequentially: cost estimation and technology assessment are performed downstream of mission analysis and vehicle sizing, with no feedback loop to the design. This decoupling is particularly consequential for crew-critical subsystems such as the Environmental Control and Life Support System (ECLSS), whose feasibility depends strongly on technology maturity and which represents one of the principal bottlenecks to achieving a viable, closed-vehicle design. The iDREAM toolset, developed jointly by Politecnico di Torino and ESA, addresses this gap with a unified framework integrating conceptual vehicle design (ASTRID-H), life-cycle cost estimation (HyCost), and technology readiness assessment with roadmap generation (TRIS), supported by a common reference database. A first development phase validated the toolset against a reference micro-launcher at the system and subsystem levels. Furthermore, it explored the overall methodology through a pre-phase A sizing of a lunar lander, focusing on wet and dry mass closure and a simplified mission analysis routine without a detailed subsystem breakdown. This paper presents two methodological enhancements introduced in the second development phase. First, vehicle sizing and mission analysis are coupled in a closed iterative loop: reduced-order models for lunar orbit transfer, powered descent, and ascent compute the delta-v budget and propellant mass fractions, feeding back into ASTRID-H for resizing until mass convergence within 1%. Second, the sizing now iterates on subsystem-level mass, power, volume, and technology allocation. ECLSS is embedded directly within this loop as the subsystem that most constrains the overall design and differentiates crewed vehicles from unmanned ones, allowing the design to respond to ECLSS technology assumptions in real time during convergence. The converged design is then evaluated against the technology roadmapping and cost routines to assess whether available technologies can satisfy the subsystem-level requirements within programmatic constraints, enabling a sensitivity analysis linking technology-readiness-level assumptions, critical for regenerative life-support technologies, to programme cost and development schedule. Where no match exists between the design and the roadmap, an alternative technology selection and ECLSS closure is reinvestigated. Application to a reference HLS short-sortie mission to the lunar south pole demonstrates the framework, with focus on ECLSS mass sensitivity to mission duration and regeneration technology assumptions, and identification of the technology development priorities most strongly driving programme cost and schedule.
File in questo prodotto:
File Dimensione Formato  
IAC_26_IDREAM_Lander__1_.pdf

accesso riservato

Tipologia: 2. Post-print / Author's Accepted Manuscript
Licenza: Non Pubblico - Accesso privato/ristretto
Dimensione 1.2 MB
Formato Adobe PDF
1.2 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
IAC_26_IDREAM_Lander_preprint.pdf

accesso aperto

Tipologia: 1. Preprint / submitted version [pre- review]
Licenza: Pubblico - Tutti i diritti riservati
Dimensione 1.2 MB
Formato Adobe PDF
1.2 MB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/3017542