This study explores the structural behavior of high-performance geopolymer concrete columns subjected to eccentric axial loading, aiming to characterize the moment–axial force interaction diagram and evaluate its comparability with that of conventional Portland cement concrete. In the absence of specific structural design guidelines for geopolymer materials, an extensive experimental program was carried out on full-scale reinforced concrete columns, tested under different eccentricities to simulate a range of combined axial and bending stresses. Columns made with geopolymer and Portland cement concrete were designed to achieve equivalent compressive strength class C80/95, allowing the investigation to isolate the influence of the binder on the overall structural performance. Key parameters - such as ultimate axial capacity, flexural strength under eccentric loading and failure modes - were measured to define the interaction diagrams (M–N curves) for both material types. The experimental outcomes were also used to assess the suitability of Eurocode 2 design provisions when applied to geopolymer concrete, highlighting similarities and/or discrepancies and quantifying the associated model uncertainties. The findings contribute critical large-scale data to support future code development and confirm the relevance of geopolymer concrete as a sustainable alternative for structural elements under combined loading conditions
Structural behavior of high performance geopolymer concrete columns under eccentric loading / Vescovi, M., Lenticchia, E., Sorrentino, G., Reggiani, A., Incerti, A., Mazzotti, C., Ferretti, D.. - (2026), pp. 2832-2837. (7th fib Congress on Structural Concrete 2050: Towards Carbon Neutrality, AI Design, and Robotic Construction, 2026 Lisbona (Portugal) 15-19 June 2026).
Structural behavior of high performance geopolymer concrete columns under eccentric loading
Lenticchia Erica;Sorrentino Gerardo;
2026
Abstract
This study explores the structural behavior of high-performance geopolymer concrete columns subjected to eccentric axial loading, aiming to characterize the moment–axial force interaction diagram and evaluate its comparability with that of conventional Portland cement concrete. In the absence of specific structural design guidelines for geopolymer materials, an extensive experimental program was carried out on full-scale reinforced concrete columns, tested under different eccentricities to simulate a range of combined axial and bending stresses. Columns made with geopolymer and Portland cement concrete were designed to achieve equivalent compressive strength class C80/95, allowing the investigation to isolate the influence of the binder on the overall structural performance. Key parameters - such as ultimate axial capacity, flexural strength under eccentric loading and failure modes - were measured to define the interaction diagrams (M–N curves) for both material types. The experimental outcomes were also used to assess the suitability of Eurocode 2 design provisions when applied to geopolymer concrete, highlighting similarities and/or discrepancies and quantifying the associated model uncertainties. The findings contribute critical large-scale data to support future code development and confirm the relevance of geopolymer concrete as a sustainable alternative for structural elements under combined loading conditions| File | Dimensione | Formato | |
|---|---|---|---|
|
Vescovi et al fib-proceedings-2026.pdf
accesso riservato
Tipologia:
2a Post-print versione editoriale / Version of Record
Licenza:
Non Pubblico - Accesso privato/ristretto
Dimensione
2.77 MB
Formato
Adobe PDF
|
2.77 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/3016199
