The main aim of this paper is the analysis and experimental evaluation of the performance of a photovoltaic power plant controlled by a dedicated algorithm. This is devoted to the search of the maximum power point during the energy conversion of the photovoltaic panels. The proposed approach uses a control strategy that does not requires the current sensing, which is a main cause of noises, errors and delays during the step by step detection of the working point. Modeling of both the power source and the switching converter is a key step for the implementation of the voltage sensing tracking routine. The proposed algorithm has been implemented in a 8-bit microcontroller. A SEPIC converter topology is the core of the experimental workbench that has been realized with 100W as rated power. The experimental analyses show a very low noise in the signal sensing and a very fast response of the whole system. This is able to reach suitable working points in less than 100ms after the a perturbation occurred. The achieved results led to consider this set-up appropriate for a system that is composed by a PV module and an integrated DC-DC converter.
A voltage sensing approach for a maximum power tracking in integrated photovoltaic applications / Cavallaro, C.; Chimento, F.; Musumeci, S.; Raciti, A.. - ELETTRONICO. - (2009), pp. 691-698. (Intervento presentato al convegno International Conference on Clean Electrical Power (ICCEP) tenutosi a Capri, Italy nel 09-11 June 2009) [10.1109/ICCEP.2009.5211955].
A voltage sensing approach for a maximum power tracking in integrated photovoltaic applications
S. Musumeci;
2009
Abstract
The main aim of this paper is the analysis and experimental evaluation of the performance of a photovoltaic power plant controlled by a dedicated algorithm. This is devoted to the search of the maximum power point during the energy conversion of the photovoltaic panels. The proposed approach uses a control strategy that does not requires the current sensing, which is a main cause of noises, errors and delays during the step by step detection of the working point. Modeling of both the power source and the switching converter is a key step for the implementation of the voltage sensing tracking routine. The proposed algorithm has been implemented in a 8-bit microcontroller. A SEPIC converter topology is the core of the experimental workbench that has been realized with 100W as rated power. The experimental analyses show a very low noise in the signal sensing and a very fast response of the whole system. This is able to reach suitable working points in less than 100ms after the a perturbation occurred. The achieved results led to consider this set-up appropriate for a system that is composed by a PV module and an integrated DC-DC converter.File | Dimensione | Formato | |
---|---|---|---|
A_voltage_sensing_approach_for_a_maximum_power_tracking_in_integrated_photovoltaic_applications.pdf
non disponibili
Tipologia:
2a Post-print versione editoriale / Version of Record
Licenza:
Non Pubblico - Accesso privato/ristretto
Dimensione
919.7 kB
Formato
Adobe PDF
|
919.7 kB | Adobe PDF | Visualizza/Apri Richiedi una copia |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2980050