Flame spray pyrolysis was used to produce nanosized Ni-based catalysts starting from different mixed oxides. LaNiO3 and CeNiO3 were used as base materials and the formulation was varied by mixing them or incorporating variable amounts of ZrO2 or SrO during the synthesis. The catalysts were tested for the steam reforming of glycerol. One of the key problems for this application is the resistance to deactivation by sintering and coking, which may be increased by (1) improving Ni dispersion through the production of a Ni-La or Ni-Ce mixed oxide precursor, and then reduced; (2) using an oxide as ZrO2, which established a strong interaction with Ni and possesses high thermal resistance; (3) decreasing the surface acidity of ZrO2 through a basic promoter/support, such as La2O3; and (4) adding a promoter/support with very high oxygen mobility such as CeO2. A further key feature is the use of a high temperature synthesis, such as flame spray pyrolysis, to improve the overall thermal resistance of the oxides. These strategies proved effective to obtain active and stable catalysts at least for 20 h on stream with very limited coke formation.
Flame pyrolysis synthesis of mixed oxides for glycerol steam reforming / Conte, F.; Esposito, S.; Dal Santo, V.; Di Michele, A.; Ramis, G.; Rossetti, I.. - In: MATERIALS. - ISSN 1996-1944. - 14:3(2021), pp. 1-19.
|Titolo:||Flame pyrolysis synthesis of mixed oxides for glycerol steam reforming|
|Data di pubblicazione:||2021|
|Digital Object Identifier (DOI):||http://dx.doi.org/10.3390/ma14030652|
|Appare nelle tipologie:||1.1 Articolo in rivista|