A key aspect of ceramic matrix composites integration is related to a reliable joining technique. An ytterbium disilicate based glass-ceramic material is processed by reactive viscous flow sintering between a barium aluminium borosilicate glass and ytterbium oxide and it is used to join SiC/SiC and C/SiC composites. The joining temperature and the in situ formation of the Yb2Si2O7 is optimised at 1200°C without pressure, on the basis of the sintering and crystallisation mechanisms. The mechanical characterization of SiC/SiC and C/SiC joined with the ytterbium disilicate-based glass-ceramic, tested by single-lap offset at RT, exhibits an apparent shear strength of 35 MPa, similar to their interlaminar shear strength. The proposed system displays self-healing behaviour at 1000 °C and 1150 °C, as demonstrated by the partial and complete sealing of induced cracks by Vickers indentation on its surface at different loads, thus suggesting that it can effectively be used as promising joining material for CMCs.
Ytterbium disilicate-based glass-ceramic as joining material for ceramic matrix composites / Smeacetto, F.; D'Isanto, F.; Casalegno, V.; Tatarko, P.; Salvo, M.. - In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. - ISSN 0955-2219. - 41:2(2021), pp. 1099-1106. [10.1016/j.jeurceramsoc.2020.10.022]
Ytterbium disilicate-based glass-ceramic as joining material for ceramic matrix composites
Smeacetto F.;D'Isanto F.;Casalegno V.;Salvo M.
2021
Abstract
A key aspect of ceramic matrix composites integration is related to a reliable joining technique. An ytterbium disilicate based glass-ceramic material is processed by reactive viscous flow sintering between a barium aluminium borosilicate glass and ytterbium oxide and it is used to join SiC/SiC and C/SiC composites. The joining temperature and the in situ formation of the Yb2Si2O7 is optimised at 1200°C without pressure, on the basis of the sintering and crystallisation mechanisms. The mechanical characterization of SiC/SiC and C/SiC joined with the ytterbium disilicate-based glass-ceramic, tested by single-lap offset at RT, exhibits an apparent shear strength of 35 MPa, similar to their interlaminar shear strength. The proposed system displays self-healing behaviour at 1000 °C and 1150 °C, as demonstrated by the partial and complete sealing of induced cracks by Vickers indentation on its surface at different loads, thus suggesting that it can effectively be used as promising joining material for CMCs.File | Dimensione | Formato | |
---|---|---|---|
1-s2.0-S0955221920308359-main.pdf
non disponibili
Descrizione: post print editoriale
Tipologia:
2a Post-print versione editoriale / Version of Record
Licenza:
Non Pubblico - Accesso privato/ristretto
Dimensione
9.33 MB
Formato
Adobe PDF
|
9.33 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
manuscipt.pdf
accesso aperto
Descrizione: pre-print pre-referaggio
Tipologia:
1. Preprint / submitted version [pre- review]
Licenza:
PUBBLICO - Tutti i diritti riservati
Dimensione
1.66 MB
Formato
Adobe PDF
|
1.66 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2856754