This paper is focused on the design, analysis and testing of a multi-material (carbon fibre and steel) Lower Control Arm (LCA) of a McPherson suspension for a C segment vehicle. Therefore, starting from the existing component (made of steel), the LCA mass has been reduced by using a hybrid technology, diminishing the steel thickness and adding a carbon fiber tailored cover without compromising the mechanical performance in terms of stiffness and stress distribution. In so doing, it has been possible to evaluate the potential and the capabilities of the hybridization without re-designing the component totally. In particular, it has been developed a specific methodology that combines both virtual and experimental procedures to face the hybridization challenges of mechanical coupling, safety and lightweight. For these reasons, the multi-material lower control arm represents a noticeable case study in which this methodology has been applied, correlated and validated.
LIGHTWEIGHT DESIGN OF A MULTI-MATERIAL SUSPENSION LOWER CONTROL ARM / Messana, Alessandro; Sisca, Lorenzo; Ferraris, Alessandro; Giancarlo Airale, Andrea; Carello, Massimiliana. - ELETTRONICO. - 4:(2020), pp. 1-11. (Intervento presentato al convegno ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2020 tenutosi a Virtuale nel August 17-19, 2020) [10.1115/DETC2020-22323].
LIGHTWEIGHT DESIGN OF A MULTI-MATERIAL SUSPENSION LOWER CONTROL ARM
Alessandro Messana;Lorenzo Sisca;Massimiliana Carello
2020
Abstract
This paper is focused on the design, analysis and testing of a multi-material (carbon fibre and steel) Lower Control Arm (LCA) of a McPherson suspension for a C segment vehicle. Therefore, starting from the existing component (made of steel), the LCA mass has been reduced by using a hybrid technology, diminishing the steel thickness and adding a carbon fiber tailored cover without compromising the mechanical performance in terms of stiffness and stress distribution. In so doing, it has been possible to evaluate the potential and the capabilities of the hybridization without re-designing the component totally. In particular, it has been developed a specific methodology that combines both virtual and experimental procedures to face the hybridization challenges of mechanical coupling, safety and lightweight. For these reasons, the multi-material lower control arm represents a noticeable case study in which this methodology has been applied, correlated and validated.File | Dimensione | Formato | |
---|---|---|---|
Messana et al. - 2020 - Lightweight Design of a Multi-Material Suspension .pdf
accesso riservato
Descrizione: Articolo Principale
Tipologia:
2a Post-print versione editoriale / Version of Record
Licenza:
Non Pubblico - Accesso privato/ristretto
Dimensione
2.25 MB
Formato
Adobe PDF
|
2.25 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/11583/2855143