We present an experimental characterization of the amplification of sub-nanosecond duration laser pulses at a wavelength of 1538 nm in short custom-made Er:Yb phosphate glass fibers with different core diameters. The fibers vary in their diameter from 100 µm (highly multi-mode) down to 12 µm (single-mode). The peak power, energy per pulse, and spectral shape of the amplified signal are presented. With our input pulses, the measurements show that the large core diameter fibers do not increase the amplification of the 1538 nm signal. We believe this is due to the high re-absorption of the Er3+ ions in the phosphate fiber. The optimal fiber geometry was found to have a core diameter of 20 µm with a length of 14 cm. The maximum peak power is 8.25 kW, corresponding to a net gain of 10.9 dB, with a pulse duration of 0.7 ns and a repetition rate of 40 kHz.

Characterization of sub-nanosecond pulsed laser amplification with Er:Yb co-doped phosphate glass fibers / Moschovitz, Omri; Boetti, Nadia G.; Pugliese, Diego; Gallichi-Nottiani, Duccio; Milanese, Daniel; Janner, Davide; Ishaaya, Amiel A.. - In: OPTICS LETTERS. - ISSN 0146-9592. - ELETTRONICO. - 45:18(2020), pp. 5291-5294. [10.1364/OL.402575]

Characterization of sub-nanosecond pulsed laser amplification with Er:Yb co-doped phosphate glass fibers

Boetti, Nadia G.;Pugliese, Diego;Gallichi-Nottiani, Duccio;Milanese, Daniel;Janner, Davide;
2020

Abstract

We present an experimental characterization of the amplification of sub-nanosecond duration laser pulses at a wavelength of 1538 nm in short custom-made Er:Yb phosphate glass fibers with different core diameters. The fibers vary in their diameter from 100 µm (highly multi-mode) down to 12 µm (single-mode). The peak power, energy per pulse, and spectral shape of the amplified signal are presented. With our input pulses, the measurements show that the large core diameter fibers do not increase the amplification of the 1538 nm signal. We believe this is due to the high re-absorption of the Er3+ ions in the phosphate fiber. The optimal fiber geometry was found to have a core diameter of 20 µm with a length of 14 cm. The maximum peak power is 8.25 kW, corresponding to a net gain of 10.9 dB, with a pulse duration of 0.7 ns and a repetition rate of 40 kHz.
2020
File in questo prodotto:
File Dimensione Formato  
ol-45-18-5291.pdf

non disponibili

Descrizione: Post-print editoriale
Tipologia: 2a Post-print versione editoriale / Version of Record
Licenza: Non Pubblico - Accesso privato/ristretto
Dimensione 806.36 kB
Formato Adobe PDF
806.36 kB Adobe PDF   Visualizza/Apri   Richiedi una copia
Post-print autore.pdf

Open Access dal 16/09/2021

Tipologia: 2. Post-print / Author's Accepted Manuscript
Licenza: PUBBLICO - Tutti i diritti riservati
Dimensione 662.96 kB
Formato Adobe PDF
662.96 kB Adobe PDF Visualizza/Apri
Pubblicazioni consigliate

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11583/2845774